Commit graph

28 commits

Author SHA1 Message Date
Arkadiusz (Arkq) Bokowy
0b08f25445 wpa_gui: Documentation update
In the commit 77b244d577a7cb5c928478627af6687a0733193d9 ('wpa_gui: Quiet
mode - disable tray icon messages') a new parameter has been introduced,
but it was not documented. This commit fixes this omission.

Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com>
2015-03-16 12:30:12 +02:00
Jouni Malinen
937403b581 Update copyright notices for the new year 2015
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:43:55 +02:00
Masashi Honma
3b797130d7 doc: Remove error on document creation
Unexpected trailing zero causes following error.

wpa_supplicant.sgml:472:53:E: character data is not allowed here

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-12-21 23:36:55 +02:00
Jouni Malinen
88a0bcab6b Update copyright years in the manpages
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-21 16:33:25 +02:00
Dan Winship
32185f541c Sync manpages and command-line options
Signed-hostap: Dan Williams <dcbw@redhat.com>
2014-01-21 16:31:50 +02:00
Dan Williams
b948e78b46 Add manpage for eapol_test
Signed-hostap: Dan Williams <dcbw@redhat.com>
2014-01-21 16:30:46 +02:00
Jouni Malinen
fcbf0b0ca9 Sync wpa_supplicant man page with README changes
The man page source was not up-to-date with removed driver wrappers,
so bring in the wpa_supplicant/README changes to make this somewhat
closer to the current state.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-04-21 19:17:14 +03:00
Jouni Malinen
d755e01b34 Remove forgotten GPL language from man pages and README files
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-04-07 13:17:20 +03:00
Jouni Malinen
df077c6262 Remove obsolete drivers wrappers: atmel, ndiswrapper, ipw, hermes
There is no real reason to maintain these in the current development
branch anymore. If someone really needs support for the obsolete
driver interfaces, these can be found in older wpa_supplicant
branches.

driver_atmel.c
- vendor-specific interface for ATMEL AT76C5XXx cards
- for some old out-of-tree driver; not for the upstream atmel*
  drivers

driver_ndiswrapper.c
- vendor-specific interface for an out-of-tree driver
- ndiswrapper should work with driver_wext.c, too

driver_ipw.c
- vendor-specific interface for old ipw2100/2200 driver
- the upstream driver works with driver_wext.c (and does not work
  with the old interface)

driver_hermes.c
- vendor driver that was not even included in the main wpa_supplicant
  releases
2011-01-30 21:29:25 +02:00
Jouni Malinen
41fa8a892f Remove old wpa_supplicant/hostapd doxygen files 2009-11-28 21:24:15 +02:00
Jouni Malinen
4bb4ae0ae0 Remove a note about other repositories of wpa_supplicant 2009-11-11 17:56:21 +02:00
Jouni Malinen
362f781e1c Allow multiple driver wrappers to be specified on command line
For example, -Dnl80211,wext could be used to automatically select
between nl80211 and wext. The first driver wrapper that is able to
initialize the interface will be used.
2009-02-14 16:43:43 +02:00
Jouni Malinen
f565d71ac9 Remove wpa_gui from doxygen documentations
The *.ui.h were causing number of warnings and they do not need to be
included in documentation.
2009-01-04 14:58:47 +02:00
Jouni Malinen
f58b20ce66 Fixed IMAGE_PATH for doxygen run in root directory 2009-01-04 14:44:33 +02:00
Jouni Malinen
cd7aacbed4 Remove temporary Qt build directories from Doxygen run 2009-01-04 14:28:20 +02:00
Jouni Malinen
842e11d0bd Remove unwanted wpa_supplicant -> struct wpa_supplicant links
Replace " wpa_supplicant" with " %wpa_supplicant" except for
"struct wpa_supplicant". This makes it easier to write Doxygen comments
since there is no need to add the ugly '%' prefix to each instance of
wpa_supplicant text showing up.
2009-01-04 14:25:58 +02:00
Jouni Malinen
e857fb05df Resolve a Doxygen warning 2009-01-04 14:06:13 +02:00
Jouni Malinen
875f6d7b93 Create all doxygen docs from root directory to get proper path names
This updated all doxygen runs to use the same style that was used for
wpa_supplicant full documents. The full vs. fast configurations are now
otherwise identical apart from fast not generating dot files or
latex/pdf version of the documentation.
2009-01-03 09:59:12 +02:00
Jouni Malinen
a17df5fb8b Fixed number of doxygen warnings 2009-01-02 22:28:04 +02:00
Jouni Malinen
a4149765a2 Added more src subdirectories into doxygen docs 2009-01-02 22:27:17 +02:00
Jouni Malinen
4be048a8a6 Updated doxygen configuration files to work with new doxygen
The doxygen run is not exactly warning free yet, but this gets a step
closer to being able to produce something useful again.
2009-01-02 21:57:51 +02:00
Jouni Malinen
13d9817dd0 Fixed a typo in wpa_supplicant manpage 2008-12-08 22:16:15 +02:00
Jouke Witteveen
e519314ee9 Add RoboSwitch driver interface for wpa_supplicant
Find attached the patch that creates a new driver: roboswitch. This
driver adds support for wired authentication with a Broadcom
RoboSwitch chipset. For example it is now possible to do wired
authentication with a Linksys WRT54G router running OpenWRT.

LIMITATIONS
- At the moment the driver does not support the BCM5365 series (though
adding it requires just some register tweaks).
- The driver is also limited to Linux (this is a far more technical
restriction).
- In order to compile against a 2.4 series you need to edit
include/linux/mii.h and change all references to "u16" in "__u16". I
have submitted a patch upstream that will fix this in a future version
of the 2.4 kernel. [These modifications (and more) are now included in
the kernel source and can be found in versions 2.4.37-rc2 and up.]

USAGE
- Usage is similar to the wired driver. Choose the interfacename of
the vlan that contains your desired authentication port on the router.
This name must be formatted as <interface>.<vlan>, which is the
default on all systems I know.
2008-11-18 16:30:32 +02:00
Kel Modderman
fc0db5c916 wpa_gui-qt4: add support for starting in system tray only
Allow application to be started in the system tray only when started with
the `-t' command line argument.

Signed-off-by: Kel Modderman <kel@otaku42.de>
2008-10-01 09:48:11 +03:00
Pavel Polischouk
9d6762cfca man wpa_supplicant: Clearly state which options are given per interface
Documentation appeared a little vague about which options are global and
which are tied to a particular interface. This leads to confusion when
using certain combinations of options, e.g. the command "wpa_supplicant
-c /etc/wpa_supplican.conf -u" will not do what is intuitively expected
from it - it will not read the config file given with -c option because
no -i option was given. This command is still valid because -u option is
used. The wpa_supplicant running like this will also not listen on any
control socket, because the socket file name is usually given in the
config file. This command line also happens to be the default in Fedora 9.
This patch does not try to change any behaviour, but rather document
these nuances clearly.
2008-06-18 11:52:20 +03:00
Kel Modderman
7da6794022 Explain not all driver backends will be compiled into wpa_supplicant binary
Explain that wpa_supplicant supports a variety of drivers, but only a
subset of them are chosen at compile time.

Signed-off-by: Kel Modderman <kel@otaku42.de>
2008-03-31 11:49:55 +03:00
Kel Modderman
eff06a7cdb Enhance manpage with use of emphasis instead of strong quote
The Debian package checker "lintian" was making noise about
wpa_supplicant.conf(5). It was caused by a line beginning with ', which is
apparently not liked by man(1).

I suggest the use of <emphasis>word</emphasis> where 'word' is used at the
moment.

Signed-off-by: Kel Modderman <kel@otaku42.de>
2008-02-27 17:48:23 -08:00
Jouni Malinen
6fc6879bd5 Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release 2008-02-27 17:34:43 -08:00