Commit graph

44 commits

Author SHA1 Message Date
Jeffin Mammen
3351a3847c WPS: Add control interface command for fetching latest status
The new wps_get_status command can be used to fetch the result of the
latest WPS operation and the current PBC state from hostapd.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 17:49:01 +03:00
Kyeyoon Park
d5b559b641 WNM: Add disassociation timeout processing for ESS_DISASSOC
The hostapd_cli ess_disassoc command now takes three arguments (STA MAC
address, timeout in ms, URL) and the STA is disconnected after the
specified timeout.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:13:40 +03:00
Jouni Malinen
6772a90ad0 WPS: Add command for fetching carrier record for NFC handover
Control interface command "NFC_GET_HANDOVER_SEL NDEF WPS-CR" can now be
used to fetch WPS carrier record from hostapd.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 17:12:55 +02:00
Jouni Malinen
e056f93e60 Update copyright notices to include year 2013
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:53 +02:00
Jouni Malinen
2049a875bc WNM: Additional BSS Transition Management capability
Add some more functionality for BSS Transition Management:
- advertise support for BSS Transition Management in extended
  capabilities element
- add hostapd.conf parameter bss_transition=1 for enabling support
  for BSS Transition Management
- add "hostapd_cli disassoc_imminent <STA> <num TBTTs>" for sending
  disassociation imminent notifications for testing purposes
- wpa_supplicant: trigger a new scan to find another BSS if the
  current AP indicates disassociation imminent (TODO: the old AP needs
  to be marked to use lower priority to avoid re-selecting it)

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-22 20:27:30 +02:00
Jouni Malinen
207fb86411 WPS: Remove deprecated UFD config method and OOB ctrl_iface
The UFD (USB flash drive) configuration method was deprecated in WSC
2.0. Since this is not known to be used, remove the UFD implementation
from hostapd and wpa_supplicant to allow the WPS implementation to be
cleaned up. This removes the now unused OOB operations and ctrl_iface
commands that had already been deprecated by the new NFC operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-11 13:01:06 +02:00
Jouni Malinen
9f36eac6e5 WPS: Remove old OOB NFC interface
The old WPS interface for using NFC has no known deployments and even
the binary libraries referenced here are not easily available anymore.
Since the new interface for using NFC with WPS covers the same
functionality, remove the old implementation to clean up WPS
implementation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-10-28 18:20:03 +02:00
Anirban Sirkhell
1c79cdff20 Add wps_cancel to hostapd_cli help text
Commit 4c374cde2f added a new wps_cancel
command, but didn't add it to the usage text in hostapd_cli. Add an
entry for this command.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-24 19:02:56 +03:00
Janusz Dziedzic
2d2398a11f edit: Add support for setting prompt string
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2012-08-05 20:46:34 +03:00
Jouni Malinen
ffdaa05a6b WPS: Add support for NCF password token from AP
The new hostapd ctrl_iface command WPS_NFC_TOKEN can now be used to
manage AP-as-Enrollee operations with NFC password token. WPS/NDEF
parameters to this command can be used to generate a new NFC password
token. enable/disable parameters can be used to enable/disable use of
NFC password token (instead of AP PIN) for external Registrars.

A preconfigured NFS password token can be used by providing its
parameters with new hostapd.conf fields wps_nfc_dev_pw_id,
wps_nfc_dh_pubkey, wps_nfc_dh_privkey, and wps_nfc_dev_pw. This use
will also depend on WPS_NFC_TOKEN enable/disable commands, i.e., the
configured NFS password token is disabled by default.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-28 19:43:29 +03:00
Jouni Malinen
3cf7a59d4f WPS: Add new mechanism for generation NFC configuration token
The new hostapd ctrl_iface command WPS_NFC_CONFIG_TOKEN can now be used
to fetch payload for an NFC configuration token so that an external
program can be used to write this on an NFC tag.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-28 13:25:48 +03:00
Jouni Malinen
bb45b6d79a WPS: Add new mechanism for communicating NFC tag read events
hostapd ctrl_iface can now be used to deliver payload from read
operation of an NFC tag. This allows operations without having to have
low-level NFC code within hostapd. For now, the new wps_nfc_tag_read
command can be used with NFC password tokens for the case where the AP
has an NFC device that is used to read an NFC tag from the station
Enrollee.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-27 21:22:13 +03:00
Anirban Sirkhell
4c374cde2f Add wps_cancel for hostapd_cli
Implement wps_cancel for hostapd similarly to how it was already
supported in wpa_supplicant AP mode.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-30 11:11:35 +03:00
Jouni Malinen
0f3d578efc Remove the GPL notification from files contributed by Jouni Malinen
Remove the GPL notification text from the files that were
initially contributed by myself.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-11 19:39:36 +02:00
Jouni Malinen
331f89ff5b Select the BSD license terms as the only license alternative
Simplify licensing terms for hostap.git by selecting the BSD license
alternative for any future distribution. This drops the GPL v2
alternative from distribution terms and from contribution requirements.

The BSD license alternative that has been used in hostap.git (the one
with advertisement clause removed) is compatible with GPL and as such
the software in hostap.git can still be used with GPL projects. In
addition, any new contribution to hostap.git is expected to be licensed
under the BSD terms that allow the changes to be merged into older
hostap repositories that still include the GPL v2 alternative.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-11 19:39:31 +02:00
Jouni Malinen
57d38ddf6b Update copyright notices to include year 2012
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-01-01 18:59:16 +02:00
Jouni Malinen
71269b3708 WNM: Add BSS Transition Management Request for ESS Disassoc Imminent
"hostapd_cli ess_disassoc (STA addr) (URL)" can now be used to send
an ESS Dissassociation Imminent notification to the STA. This event
is shown in wpa_supplicant ctrl_iface monitors (e.g., wpa_cli):
"WNM: ESS Disassociation Imminent - session_info_url=http://example.com/session/"
2011-10-16 23:55:34 +03:00
Jouni Malinen
4283805972 hostapd_cli: Start using src/utils/edit*.c
This brings hostapd_cli closer to the design used in wpa_cli
and allows command history and editing mechanisms to be added.
2011-07-16 17:37:18 +03:00
Jouni Malinen
9e0749737c Update copyright notices to include the new year 2011-02-27 12:50:00 +02:00
Ben Greear
b41a47c03f hostapd: Allow logging to file
Also supports 'relog' CLI command to re-open the log file.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2011-02-06 20:24:16 +02:00
Jouni Malinen
acec8d3203 Add ctrl_iface command 'GET version'
This can be used to fetch the wpa_supplicant/hostapd version
string.
2010-10-31 17:07:31 +02:00
Jouni Malinen
450eddcfae hostapd: Add wps_config ctrl_interface command for configuring AP
This command can be used to configure the AP using the internal
WPS registrar. It works in the same way as new AP settings received
from an ER.
2010-10-21 16:49:41 +03:00
Jouni Malinen
403b96fe4f WPS: Add hostapd_cli get_config command
This can be used by a WPS UI to display the current AP configuration.
2010-09-23 12:02:28 -07:00
Jouni Malinen
3981cb3cb8 WPS: Add wps_check_pin command for processing PIN from user input
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
2010-09-23 10:30:52 -07:00
Jouni Malinen
b4e34f2fdf WPS: Make testing operations configurable at runtime
Instead of build time options (CONFIG_WPS_TESTING_EXTRA_CRED and
CONFIG_WPS_EXTENSIBILITY_TESTING), use a single build option
(CONFIG_WPS_TESTING) and runtime configuration of which testing
operations are enabled. This allows a single binary to be used
for various tests.

The runtime configuration can be done through control interface
with wpa_cli/hostapd_cli commands:
Enable extensibility tests:
set wps_version_number 0x57
Disable extensibility tests (WPS2 build):
set wps_version_number 0x20
Enable extra credential tests:
set wps_testing_dummy_cred 1
Disable extra credential tests:
set wps_testing_dummy_cred 0
2010-09-21 19:51:23 -07:00
Jouni Malinen
31fcea931d WPS 2.0: Add support for AuthorizedMACs attribute
Advertize list of authorized enrollee MAC addresses in Beacon and
Probe Response frames and use these when selecting the AP. In order
to provide the list, the enrollee MAC address should be specified
whenever adding a new PIN. In addition, add UUID-R into
SetSelectedRegistrar action to make it potentially easier for an AP
to figure out which ER sent the action should there be multiple ERs
using the same IP address.
2010-09-09 06:07:47 -07:00
Jouni Malinen
5a1cc30f1a WPS: Add support for dynamic AP PIN management
A new hostapd_cli command, wps_ap_pin, can now be used to manage
AP PIN at runtime. This can be used to generate a random AP PIN and
to only enable the AP PIN for short period (e.g., based on user
action on the AP device). Use of random AP PIN that is only enabled
for short duration is highly recommended to avoid security issues
with a static AP PIN.
2010-08-24 16:35:37 +03:00
Jouni Malinen
488d0934ab hostapd_cli: Add deauth/disassoc commands to usage help 2010-04-11 21:00:16 +03:00
Jouni Malinen
b242d398f8 Use more os.h wrapper functions in hostapd_cli 2010-04-07 11:40:34 +03:00
Gregory Detal
bae9217474 Add support for action scripts in hostapd_cli 2010-04-07 11:14:54 +03:00
Jouni Malinen
b91ab76e8c Add test commands for sending deauth/disassoc without dropping state
This can be used to test 802.11w by sending a protected or unprotected
deauth/disassoc frame.

hostapd_cli deauth <dst addr> test=<0/1>
hostapd_cli disassoc <dst addr> test=<0/1>

test=0: unprotected
test=1: protected
2010-03-29 12:01:40 -07:00
Jouni Malinen
90a3206a14 Add deauthenticate/disassociate ctrl_iface commands 2010-03-29 11:14:57 -07:00
Jouni Malinen
dff0f701d0 Preparations for v0.7.1 release 2010-01-16 19:04:38 +02:00
Jouni Malinen
3433ed8c03 hostapd_cli: Use os_program_{init,deinit} 2009-12-19 22:26:36 +02:00
Jouni Malinen
90973fb2fd Remove src/common from default header file path
This makes it clearer which files are including header from src/common.
Some of these cases should probably be cleaned up in the future not to
do that.

In addition, src/common/nl80211_copy.h and wireless_copy.h were moved
into src/drivers since they are only used by driver wrappers and do not
need to live in src/common.
2009-11-29 17:51:55 +02:00
Jouni Malinen
077a781f7a WPS: Add support for setting timeout for PIN
hostapd_cli wps_pin command can now have an optional timeout
parameter that sets the PIN lifetime in seconds. This can be used
to reduce the likelihood of someone else using the PIN should an
active PIN be left in the Registrar.
2009-05-26 17:44:44 +03:00
Masashi Honma
e1ee6b600b WPS: Add support for NFC out-of-band mechanism
The new file wps_nfc.c and ndef.c implements NFC device independent
operation, wps_nfc_pn531.c implements NFC device dependent operation.

This patch is only for the following use case:
- Enrollee = wpa_supplicant
- Registrar = hostapd internal Registrar

Following NFC methods can be used:
- Enrollee PIN with NFC
- Registrar PIN with NFC
- unencrypted credential with NFC

Encrypted credentials are not supported.

Enrollee side operation:

Registrar side operation:

Example configuration.
CONFIG_WPS=y
CONFIG_WPS_NFC=y
CONFIG_WPS_NFC_PN531=y

I used NFC device "NXP PN531". The NFC device access method is
confidential, so I used outer library. Please download below files from
https://www.saice-wpsnfc.bz/index.php

[WPS NFC Library]
WpsNfcLibrary/WpsNfc.h
WpsNfcLibrary/WpsNfcType.h
WpsNfcLibrary/WpsNfcVersion.h
WpsNfcLibrary/linux/libnfc_mapping_pn53x.dll
WpsNfcLibrary/linux/wpsnfc.dll

[NFC Reader/Writer Kernel Driver]
NFCKernelDriver-1.0.3/linux/kobj/sonyrw.ko

<WiFi test>
The hostapd/wpa_supplicant with this patch passed below tests on
"Wi-Fi WPS Test Plan Version 1.6".
4.2.5 Add device using NFC Method with password token
(I used SONY STA instead of NXP STA.)

4.2.6 Add device using NFC Method with configuration token

5.1.9 Add to AP using NFC Method with password token
through internal registrar
(I used SONY AP instead of NXP AP.)

5.1.10 Add to AP using NFC Method with configuration token
through internal registrar
2009-03-06 16:16:22 +02:00
Jouni Malinen
116f7bb0a3 WPS UFD: Build OOB functionality only if UFD is enabled 2009-02-26 22:10:21 +02:00
Masashi Honma
46bdb83acd WPS: Add UFD support (USBA out-of-band mechanism)
This patch is only for the following use case:
- Enrollee = wpa_supplicant
- Registrar = hostapd internal Registrar

Following UFD methods can be used:
- Enrollee PIN with UFD
- Registrar PIN with UFD
- unencrypted credential with UFD

Encrypted credentials are not supported.

Enrollee side operation:
wpa_cli -i ath0 wps_oob <device type> <mount point> <oob method>
    oob method = pin-e/pin-r/cred

wpa_cli -i ath0 wps_oob ufd /mnt/ pin-r

Registrar side operation:
./hostapd_cli -i ath0 wps_oob <device type> <mount point> <oob method>
    oob method = pin-e/pin-r/cred

hostapd_cli -i ath0 wps_oob ufd /mnt/ cred
2009-02-26 21:57:38 +02:00
Jouni Malinen
1cc84c1c6b Increased wpa_cli/hostapd_cli ping interval and made it configurable
The default interval is now 5 seconds (used to be 1 second for
interactive mode and 2 seconds for wpa_cli -a). The interval can be
changed with -G<seconds> command line option.
2009-01-20 21:12:00 +02:00
Jouni Malinen
6f78f2fb3b Preparations for 0.6.7 release 2009-01-06 20:11:15 +02:00
Jouni Malinen
88b4b4246d Added ctrl_interface command for sending a SA Query request
This can be useful for testing IEEE 802.11w functionality, so provide
means for manual request to send a SA Query request.
2008-12-30 18:04:29 +02:00
Jouni Malinen
ad08c3633c Added preliminary Wi-Fi Protected Setup (WPS) implementation
This adds WPS support for both hostapd and wpa_supplicant. Both programs
can be configured to act as WPS Enrollee and Registrar. Both PBC and PIN
methods are supported.

Currently, hostapd has more complete configuration option for WPS
parameters and wpa_supplicant configuration style will likely change in
the future. External Registrars are not yet supported in hostapd or
wpa_supplicant. While wpa_supplicant has initial support for acting as
an Registrar to configure an AP, this is still using number of hardcoded
parameters which will need to be made configurable for proper operation.
2008-11-23 19:34:26 +02:00
Jouni Malinen
6fc6879bd5 Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release 2008-02-27 17:34:43 -08:00