Commit graph

542 commits

Author SHA1 Message Date
Jouni Malinen
97de642ae3 tests: HS 2.0 OSU and icon fetch
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:34 +02:00
Jouni Malinen
75f6134dd4 tests: GAS comeback protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:34 +02:00
Jouni Malinen
c61e5a822c tests: Verify TEMP-DISABLED flag in HS 2.0 deauth req
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:34 +02:00
Jouni Malinen
16ab63f4dd tests: Check Interworking already-connected with all credential types
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:34 +02:00
Jouni Malinen
e2afdef223 tests: Verify excluded_ssid with all credential types
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:34 +02:00
Jouni Malinen
0b651713bf tests: Speed up INTERWORKING_SELECT cases with freq parameter
This removes unnecessary full scan from couple of test cases that missed
this optimization.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:34 +02:00
Jouni Malinen
a3dd04781c tests: Increase req_conn_capab coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:34 +02:00
Jouni Malinen
9714fbcdcc tests: HS 2.0 minimum bandwidth policy
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:33 +02:00
Jouni Malinen
0fc743f24e tests: Add more coverage for SET_NETWORK parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:33 +02:00
Jouni Malinen
14bef66d66 tests: Server certificate with both client and server EKU
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:33 +02:00
Jouni Malinen
1221639d45 tests: HS 2.0 network selection with username vs. SIM credential
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:33 +02:00
Jouni Malinen
9d756af73e tests: Verify RADIUS functionality over IPv6
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:33 +02:00
Jouni Malinen
cfa57df68d tests: Verify that home operator is preferred over roaming operator
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-27 19:34:34 +02:00
Jouni Malinen
10b3cc6791 tests: Verify HS 2.0 connection status values
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-27 19:26:50 +02:00
Jouni Malinen
eaff34588c tests: Verify HS 2.0 cred selection based on priority
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-27 19:23:14 +02:00
Jouni Malinen
a1281b9f45 tests: Verify HS 2.0 AP connection with non-HS 2.0 station
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-27 19:04:56 +02:00
Jouni Malinen
180cd73dc8 tests: Optimize ap_wps_init_through_wps_config
Wait a bit between WPS_CONFIG command and the first scan. This can avoid
an extra five second wait due to having to scan again if the initial
scan operations happens to be quick enough to happen before the AP has
updated its configuration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-27 18:01:32 +02:00
Jouni Malinen
a96066a5d3 tests: Verify cred vs. network block priority selection
This verifies that 'INTERWORKING_SELECT auto' is able to pick the
correct network based on priority configuration when connected to a
lower priority network.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-27 14:17:31 +02:00
Jouni Malinen
1815317906 tests: Verify req_conn_capab as cred parameter
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-27 00:49:52 +02:00
Jouni Malinen
2ded0539c2 tests: wpa_supplicant ctrl_iface config parser
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 18:48:12 +02:00
Jouni Malinen
af70a09332 tests: Verify invalid required_roaming_consortium values
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 18:35:43 +02:00
Jouni Malinen
9e709315d9 tests: Verify HS 2.0 OSEN connection
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 18:10:08 +02:00
Jouni Malinen
5e32f8256f tests: Verify HS 2.0R2 deauthentication request
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
5f1e31cfc8 tests: Add update_identifier to one of the HS 2.0 test cases
This allows debug logs to be used to verify byte order in the
PPS MO ID fields.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
1965cc3aa8 tests: Verify HS 2.0 excluded AP reporting
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
19839f8efc tests: HS 2.0 maximum BSS Load constraint
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
953a574d49 tests: Verify INTERWORKING-SELECTED in HS 2.0 policy tests
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
2253ea44c2 tests: HS 2.0 roaming partner preference
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
078683ac2b tests: Verify multi-cred sp_priority use
test_ap_hs20_multi_cred_sp_prio verifies that two credentials
provisioned by a single SP are selected properly based on sp_priority
when a single BSS matches both credentials.
test_ap_hs20_multi_cred_sp_prio2 does the same when there a separate BSS
for each credential.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
d369bdcad9 tests: Clear pmf parameter on reset()
This is in preparation of removing pmf parameter reset on the FLUSH
command.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-26 01:24:22 +02:00
Jouni Malinen
12c587a517 tests: Verify domain_suffix_match in a cred block
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-25 23:40:29 +02:00
Jouni Malinen
4b572e3ac1 tests: Verify Interworking network selection with no auth params
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-25 23:16:54 +02:00
Jouni Malinen
d405893439 tests: Verify Interworking network selection reconnection
This verifies that 'INTERWORKING_SELECT auto' is able to roam to a
higher priority network when executed while connected to a lower
priority network.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-25 22:41:03 +02:00
Luciano Coelho
be32ace48b hwsim tests: Add support for the chanctx flag when creating radios
Add a new option to set the use_chanctx flag when creating a radio.
While at it, refactor the arguments parsing code to use argparse.

Signed-hostap: Luciano Coelho <luciano.coelho@intel.com>
2014-02-25 16:53:40 +02:00
Jouni Malinen
56d3b4d668 tests: Enable CCMP fragmentation check
This was triggering failures due to a mac80211 bug that has now been
fixed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-24 17:15:16 +02:00
Jouni Malinen
47c549fd8e tests: WPS UPnP operations
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-24 13:56:43 +02:00
Jouni Malinen
44ff0400b4 tests: WPS UPnP SSDP testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-24 13:56:42 +02:00
Jouni Malinen
b2210bd289 tests: Stop WPS ER on station reset
This seems to be needed in some cases to avoid issues in test cases that
assume there are no other ERs running.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-24 13:56:42 +02:00
Jouni Malinen
29513e461a tests: Remove forgotten tcpdump references
tcpdump has not been used in the test scripts for a while, so no need
to stop it from stop.sh.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-22 10:47:49 +02:00
Jouni Malinen
8107d33361 tests: Fix the file comment to describe what this script does
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 20:25:25 +02:00
Roger Zanoni
040dc68e8c tests: Change the python interpreter directive
This makes the script check the environment for the current python
interpreter in use instead of assuming that the python executable points
to a python 2 interpreter.

Signed-off-by: Roger Zanoni <roger.zanoni@openbossa.org>
2014-02-21 20:23:56 +02:00
Jouni Malinen
5be9dcbb86 tests: Remove unnecessary interpreter line from most python files
Only run-tests.py is actually executed, so there is no need to specify
the interpreter in all the helper files and test script files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 20:21:53 +02:00
Jouni Malinen
ea449b5bfe tests: Add a module test integration to hwsim tests
CONFIG_MODULE_TESTS=y build option can now be used to build in module
tests into hostapd and wpa_supplicant binaries. These test cases will be
used to get better testing coverage for various details that are
difficult to test otherwise through the control interface control. A
single control interface command is used to executed these tests within
the hwsim test framework. This commit adds just the new mechanism, but no
module tests are yet integrated into this mechanism.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 13:08:08 +02:00
Jouni Malinen
66a6331501 tests: Increase P2P SD test coverage
Verify cases both with multiple peers (one of which not advertising any
services) and with multiple SD queries.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-20 16:32:26 +02:00
Jouni Malinen
41ff0fa64c tests: Verify NAS identification attributes in Disconnect-Request
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-20 13:56:27 +02:00
Jouni Malinen
e58f59cb58 tests: Verify that Disconnect-Request prevents PMKSA caching
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-20 13:27:16 +02:00
Jouni Malinen
da63ee073f tests: Add more time for P2P discovery tests
It looks like some of the discovery_* test cases have been failing every
now and then on the virtual server and the one second timeout could have
been a bit too short to cover some possible timing cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-17 11:42:43 +02:00
Jouni Malinen
55497a51a8 tests: Verify CoA-Request behavior
This version verifies that hostapd NAKs a valid request since
CoA-Request is not yet supported.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 22:03:06 +02:00
Jouni Malinen
6f939e591e tests: Convert connect() to use kwargs
This makes it more convenient to add new network block parameters.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 21:58:09 +02:00
Jouni Malinen
a3b2bdaf24 tests: Verify RADIUS Disconnect-Request behavior
This uses pyrad to build and send various Disconnect-Request packets to
hostapd.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 21:58:08 +02:00
Jouni Malinen
4fcee244b9 tests: Verify RADIUS server MIB values
Enable hostapd control interface for the RADIUS server instance and
verify that the RADIUS server MIB counters are incremented.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 21:39:31 +02:00
Jouni Malinen
4287bb76bf tests: Verify RADIUS accounting functionality
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 17:08:38 +02:00
Jouni Malinen
1cfb58d400 tests: Build hlr_auc_gw separately for code coverage analysis
This improves accuracy of the code coverage reports with hostapd-as-AS
and hlr_auc_gw getting analyzed separately.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 17:08:38 +02:00
Jouni Malinen
eac674402f tests: Verify NtPasswordHash with different UTF-8 cases
This adds a password that uses one, two, and three octet encoding
for UTF-8 characters. The value is tested against a pre-configured
hash to verify that utf8_to_ucs2() function works correctly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 12:08:50 +02:00
Jouni Malinen
242219c563 tests: Set dh_file on EAP client
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 10:42:56 +02:00
Jouni Malinen
6ab4a7aa5a tests: EAP-TTLS and server certificate with client EKU
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 10:33:55 +02:00
Jouni Malinen
6a4d0dbe1c tests: Expired server certificate
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 10:28:22 +02:00
Jouni Malinen
64e05f9644 tests: Domain name suffix match against CN
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 10:19:16 +02:00
Jouni Malinen
e01929c668 tests: Report unexpected STATUS lines instead of stopping
It looks like get_status() has failed in some test runs because of a
STATUS command returning an line without '=' on it. Instead of stopping
there on exception, report the unexpected line in the log and ignore it
to allow test to continue.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-04 13:23:35 +02:00
Jouni Malinen
ca5b81a5bb tests: wpa_supplicant ctrl_iface
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-04 13:10:57 +02:00
Jouni Malinen
e1a5e09ab7 tests: AP mode operations with wpa_supplicant
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-04 13:10:57 +02:00
Jouni Malinen
1f020f5eb6 tests: Verify functionality with WPS 1.0 ER
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-04 13:10:57 +02:00
Jouni Malinen
11e7eeba8e tests: Verify WPS AP does not activate PBC during overlap
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:10:57 +02:00
Jouni Malinen
11c26f1b4a tests: Verify WPS ER behavior on selecting a single Enrollee
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:10:57 +02:00
Jouni Malinen
da10266224 tests: WEP
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:10:57 +02:00
Jouni Malinen
787136b040 tests require_ht=1
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:10:57 +02:00
Jouni Malinen
cce26eb411 tests: ctrl_iface STA-FIRST and STA-NEXT iteration
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:10:57 +02:00
Jouni Malinen
cddc19e56b tests: NAI Home Realm Query
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:10:57 +02:00
Jouni Malinen
23bd3c5b67 tests: OLBC AP detection
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:10:57 +02:00
Jouni Malinen
47a7e44084 tests: Hidden SSID using zero octets as payload
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:10:57 +02:00
Jouni Malinen
084316bfd6 tests: HT40 OBSS scan and 20/40 MHz co-ex report
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:10:57 +02:00
Jouni Malinen
e769364b82 tests: Add test cases for various AP mode parameters
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-04 13:10:57 +02:00
Jouni Malinen
c89d9ebbc4 tests: Verify different ways of configuring passphrase/PSK
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-04 13:10:57 +02:00
Jouni Malinen
c8373f1015 tests: Add test cases for static handover for join-a-group
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 22:08:13 +02:00
Jouni Malinen
014f60d0eb tests: Add test cases WPS ER with NFC
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 22:08:13 +02:00
Jouni Malinen
8f96dadc9e tests: Add a test case for WPS connection handover with password token
This verifies that NFC connection handover can be used in a case where
hostapd has an enabled password token.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 22:08:13 +02:00
Jouni Malinen
fa697bb82b tests: Add test cases for public key hash mismatches
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 22:08:13 +02:00
Jouni Malinen
2108ae1e83 tests: Add a test case for NFC handover resulting in auto configuration
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 22:08:13 +02:00
Jouni Malinen
c9dc56231b tests: Add test cases for P2P+NFC
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 22:08:13 +02:00
Jouni Malinen
f8949f5f8f tests: Reset hostapd state with FLUSH between test cases
This is similar to the FLUSH command for wpa_supplicant.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 22:08:13 +02:00
Jouni Malinen
ee2caef38e tests: Verify GAS/ANQP use during PMF association
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-23 11:50:29 +02:00
Jouni Malinen
99fa65bc28 tests: Verify peer discovery in no-Probe Request case
Verify that PD Request followed by GO Negotiation Request is enough to
learn the Listen frequency of the peer.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-17 19:38:02 +02:00
Johannes Berg
ac5e8631e6 hwsim tests: vm: add optional time-warp
To test the code under the influence of time jumps, add the option
(--timewarp) to the VM tests to reset the clock all the time, which
makes the wall clock time jump speed up 20x, causing gettimeofday()
to be unreliable for timeout calculations.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2014-01-17 12:00:20 +02:00
Jouni Malinen
94a2dd0b25 tests: Add some delay before wlantest operations
Since wlantest is a separate process that is not synchronized with rest
of the test components, there can be some latency in it having the STA
entries and counters updated. There is a race condition between this
happening and then test script clearing or fetching data. Make this race
condition less likely to cause bogus test failures by adding some wait
between these operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-15 00:09:56 +02:00
Jouni Malinen
b21df6e779 tests: Run dump_monitor() again if scan was pending
In addition to running the FLUSH command again, the pending monitor
interface events need be cleared in case the driver was running a scan
when reset() is called. This avoids issues, e.g., with discovery_dev_id
failing due to an unexpected P2P-DEVICE-FOUND event that was generated
by the pending scan operation that had not yet complete when the first
dump_monitor() call in reset() happened.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-15 00:09:56 +02:00
Johannes Berg
fd77e594a4 hwsim tests: vm: read a config file from $HOME
The vm-config in the subdirectory is less useful as it
will get removed by "git clean" and similar, so read a
config file from ~/.wpas-vm-config in addition.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-14 17:08:04 +02:00
Johannes Berg
fe8691248d hwsim tests: add a hwsim controller module
The controller module allows adding/destroying radios on the fly
with the recent hwsim changes.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-14 17:08:04 +02:00
Jouni Malinen
7559ad7af6 tests: Double the connection timeout for EAP cases
It looks like slow virtual machines may have issues to complete some EAP
authentication cases (e.g., EAP-EKE in ap_ft_eap) within the 10 second
timeout under load. Double the timeout to avoid incorrect test failures.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-13 20:47:01 +02:00
Jouni Malinen
c57c1ed6b3 tests: Clear data from ongoing scan on reset()
It was possible for the previous test case to leave unexpected BSS or
P2P peer table entries if a scan was in progress when the FLUSH command
was used. This could result in test failures, e.g., when running
discovery_dev_type_go followed by discovery_group_client where a P2P
peer was discovered on another channel at the end of the former test
case from a scan that was running durign the FLUSH operation that was
supposed to remove all P2P peers. This could result in
discovery_group_client failing due to dev[2] trying to send the
discoverability frame on incorrect channel (the one learned in the
previous test case) since discover_peer() skipped a new device
discovery. Fix this by running FLUSH operation again if a pending scan
operation is detected during the first FLUSH operation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-13 20:26:22 +02:00
Jouni Malinen
c70ebce0ba tests: P2P device discovery filtering on Device ID and Device Type
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 22:25:58 +02:00
Jouni Malinen
d4c7a2b9e6 tests: EAP-TLS with OCSP
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 17:45:56 +02:00
Jouni Malinen
2d10eb0efd tests: PKCS#12 use for EAP-TLS
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 17:18:22 +02:00
Jouni Malinen
9f8994c623 tests: CA certificate in DER format
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 17:06:36 +02:00
Jouni Malinen
57be05e158 tests: Server certificate trust based on hash value
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 17:04:45 +02:00
Jouni Malinen
3b74982f93 tests: subject_match and altsubject_match
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 17:04:35 +02:00
Jouni Malinen
53a6f06a0b tests: EAP-FAST
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 16:42:15 +02:00
Jouni Malinen
c075f040a1 tests: Verify all implemented EAP-pwd groups
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 09:08:54 +02:00
Jouni Malinen
dccafedb9a tests: Include vendor extension in WPS M1
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 23:37:13 +02:00
Jouni Malinen
1013a57654 tests: WPS AP using fragmented WPS IE
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 23:22:45 +02:00
Jouni Malinen
9ba1fcb056 tests: WPS 2.0 AP rejecting WEP configuration
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 23:08:26 +02:00
Jouni Malinen
33de4f2d7a tests: External password storage
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 22:32:12 +02:00
Jouni Malinen
f19ee5b7f7 tests: Hidden SSID
In addition, add the earlier tests in the new test_ssid.py file that was
forgotten from the previous commit
d78f33030d.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 20:23:56 +02:00
Jouni Malinen
8697cbc0f8 tests: Make ap_wps_er_add_enrollee less likely to fail
WPS-ER-AP-REMOVE event from the ER is sent before HTTP UNSUBSCRIBE has
been completed. As such, it was possible for the following scan
validation step to be started before the AP has had a chance to react to
the ER status change. Makes this less likely to fail by waiting 200 ms
before starting the last scan.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 15:20:30 +02:00
Jouni Malinen
a06b1070d8 tests: P2P_REJECT to reject GO Negotiation Request frames
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:12 +02:00
Jouni Malinen
2db832b1e6 tests: Negative test case for P2P group formation with incorrect PIN
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:12 +02:00
Jouni Malinen
675b1f891b tests: p2p_client_list on persistent GO
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:12 +02:00
Jouni Malinen
a36158befe tests: Add get_driver_status for Hostapd
This is identical to the same command in WpaSupplicant class.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:12 +02:00
Jouni Malinen
fa0ddb1484 tests: MSCHAPv2 password as hash value
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:11 +02:00
Jouni Malinen
e745c811ef tests: Verify EAP vendor test
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:11 +02:00
Jouni Malinen
d0ce105068 tests: Verify EAP-PEAP/EAP-TLS
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:11 +02:00
Jouni Malinen
f10ba3b2fc tests: Negative test cases with incorrect EAP password
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:11 +02:00
Jouni Malinen
6daf5b9c1c tests: Add more EAP fragmentation tests
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:11 +02:00
Jouni Malinen
40759604f6 tests: Interactive identity/password query for EAP
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:11 +02:00
Jouni Malinen
8674c02244 tests: Allow multiple Enrollee events in ap_wps_er_add_enrollee_pbc
It was possible for the AP to report two enrollees in this test case
(i.e., both the expected wlan1 device and also the ER device on wlan0).
The previous test script would fail if the wlan0 device is reported
first. Fix this by allowed the expected target to be found in either the
first or the second WPS-ER-ENROLLEE-ADD event.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:11 +02:00
Jouni Malinen
d4b21766e5 tests: Force p2p_find in p2p_service_discovery_fragmentation
It was possible for this test case to fail if P2P_FLUSH was issued
during a search scan and that scan adding back the peer. Avoid this by
forcing p2p_find to be started regardless of the current P2P peer table
contents for each round of service discovery.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:11 +02:00
Jouni Malinen
cb33ee143b tests: Make WPA2-Enterprise reauth test cases more robust
With the extra latencies removed from run-tests.py operations, it was
possible to hit race conditions in pairwise cipher configuration at the
end of the 4-way handshake. In some cases, the EAPOL-Start frame from
the station was not received by the AP and that could result in these
test cases failing. Since there are not really trying to test the race
condition, wait for the AP side to complete key configuration prior to
initiating the reauthentication sequence.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:11 +02:00
Jouni Malinen
0c35b91c5f tests: Cleaner error processing for threads
When a thread is used to follow P2P group formation progress, it is
better to return a clear failure indication from the thread instead of
allowing an exception to be thrown from the thread.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:11 +02:00
Jouni Malinen
369f9c20ee tests: Validate EAP-GPSK cipher suite negotiation
This covers all currently supported algorithms and the case of no match.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:11 +02:00
Jouni Malinen
324c99296a tests: Document the unique index needed for the tests table
This is needed for "INSERT OR REPLACE INTO tests" to work correctly with
run-tests.py -L.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:11 +02:00
Jouni Malinen
aa5fcc558b tests: Show missing descriptions in more helpful format
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
82fa9b62ff tests: Add forgotten test_wifi_display description
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
2f37a66dda tests: Optimize Interworking test cases with single-channel scans
Leave couple of cases to use full scan for better test coverage, but
change all other places to use a single channel scan with
INTERWORKING_SELECT to reduce the time it takes to execute the tests.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
fce6ddd8d0 tests: Avoid unnecessary wlantest failures
It is possible that wlantest has not yet created the BSS entry in all
cases, so interpret failures (no BSS entry being the most likely cause)
as zero counters. Similarly, ignore clear_bss_counters errors since they
are most likely reporting that the BSS was not found and as such, there
was no need to clear the counters anyway.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
bce774ad63 tests: Use ctrl_iface event for EAP reauth instead of STATUS poll
This speeds up the EAP test cases a bit by avoiding polling for
wpa_supplicant status.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
710f96fd8c tests: Remove unnecessary reset() steps
The FLUSH command clears disallow_aps, p2p_disabled, and
p2p_per_sta_psk, so there is no need to clear them separately.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
36408936f8 tests: Optimize wait_event()
Replace the fixed 100 ms waits with a select()-based wait and timeout
for full wait based on monotonic time to optimize wait_event().

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
adf277a007 tests: Minor clean up for GAS test cases
Do not run a full scan in gas_generic since this is not really needed.
Dump pending event messages after long wait to make logs clearer.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
d45e417f7b tests: Clean up hostapd ctrl_iface debug logging
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
1d646f5ee1 tests: Write debug logs into the database for failed test cases
This makes it easier to build a web page for analyzing failures without
having to fetch the log files themselves from the test server.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
26b846672c tests: Radio work items
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
e766f56643 tests: Verify behavior during externally triggered scan
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
7c0d8645a1 tests: Verify cfg80211 connect API with concurrent operation
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:09 +02:00
Jouni Malinen
d7a99700de tests: Clean up and optimize gas_concurrent_scan and _connect
No need to run a full scan as the first step since it only needs to find
the AP from a known channel for the GAS operation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-05 22:33:06 +02:00
Jouni Malinen
ad36d27d6a tests: Remove ignore_old_scan_res workaround
Now that wpa_supplicant requests the driver (cfg80211) to clear its scan
cache automatically after each BSS_FLUSH/FLUSH command, the previously
used ignore_old_scan_res workaround should not be needed for the hwsim
test cases anymore.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-03 08:59:59 +02:00
Jouni Malinen
5dec879d5b tests: Verify STA command output and EAPOL state
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-02 18:10:30 +02:00
Jouni Malinen
75b25ece93 tests: Verify GET_CONFIG ctrl_iface command on hostapd
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-01 22:15:36 +02:00
Jouni Malinen
9488858f29 tests: Add more thorough WPS_AP_PIN validation
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-01 22:11:46 +02:00
Jouni Malinen
3bdf7d7f67 tests: Verify WPS_CHECK_PIN functionality
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-01 21:30:57 +02:00
Jouni Malinen
474d209057 tests: P2P SD using per-peer query
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-01 20:01:00 +02:00
Jouni Malinen
8fdcca3452 tests: Verify P2P SD request cancel
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-01 19:56:24 +02:00
Jouni Malinen
34d35be44b tests: P2P service discovery with GAS fragmentation
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-01 18:56:20 +02:00
Jouni Malinen
984c5b96e3 tests: P2P Presence Request
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-01 18:46:28 +02:00
Jouni Malinen
9a170ed244 tests: Add some coverage for Device Discoverability exchange
This is not really perfect, but something to get a bit more testing
coverage.. For proper discoverability mechanism validation, the P2P
client would need to go to sleep to avoid acknowledging the GO
Negotiation Request frame. Offchannel Listen mode operation on the P2P
Client with mac80211_hwsim is apparently not enough to avoid the
acknowledgement on the operating channel, so need to disconnect from the
group which removes the GO-to-P2P Client part of the discoverability
exchange in practice.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-01 17:37:08 +02:00
Jouni Malinen
7fd15145ff tests: RADIUS
This adds initial set of test cases to increase RADIUS testing coverage.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:03:39 +02:00
Jouni Malinen
d78f33030d tests: SSID contents and encoding
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:03:39 +02:00
Jouni Malinen
20e5c2830f tests: Add IEEE 802.1X and dynamic WEP test cases
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:03:39 +02:00
Jouni Malinen
2e3aec56e7 tests: Verify mixed mode WPA+WPA2 operation
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:03:39 +02:00
Jouni Malinen
08567ff6da tests: Verify WMM AC configuration and ACM=1 downgrade VO/VI->BE
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 15:45:18 +02:00
Jouni Malinen
c2f70afa51 tests: WEXT functionality
It did not look like open mode association completed with WEXT.. I'm
commenting that test case out for now since WPA2-PSK worked. If you care
about WEXT, feel free to fix it and submit a patch to remove the
"REMOVED_" prefix here..

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 15:45:18 +02:00
Jouni Malinen
6e917c3e25 tests: Increase nl80211 test coverage with monitor/connect
Add test cases to use connect command instead of auth+assoc commands and
AP mode operations using the old monitor interface design.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 15:45:18 +02:00