Commit graph

75 commits

Author SHA1 Message Date
Jouni Malinen
52ed13b78d tests: Move csa_supported() into utils.py
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-18 11:35:32 +03:00
Jouni Malinen
0b21877185 tests: Move clear_scan_cache() and set_world_reg() to utils.py
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-18 11:35:32 +03:00
Jouni Malinen
55093c8014 tests: Current Operating Class value from STA
Verify Supported Operating Classes element contents from STA in various
HT and VHT cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-11 18:30:51 +02:00
Jouni Malinen
2fb59e77b5 tests: HT with 20 MHz channel width doing CSA to 40 MHz
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-06 21:44:31 +02:00
Jouni Malinen
154722e5b1 tests: Make ap_ht_40mhz_intolerant_ap more robust
Some test case sequences seemed to prevent the station from completing
the first OBSS scan (that scan was aborted) and that resulted in failing
the test case because the AP had not received any report in time. Wait
for scan completion and allow additional scans before timing out to
avoid indicating incorrect AP behavior in cases where the report was not
even received.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-06 21:44:31 +02:00
Jouni Malinen
91ea29a79e tests: Remove ap_ht_smps
AP using SMPS mode locally is about to be removed from hostapd, so
remove the test case that was using it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-02-16 13:48:39 +02:00
Jouni Malinen
99fdc0413b tests: WMM IE contents in FCC and ETSI
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-02-03 02:03:32 +02:00
Jouni Malinen
a48a60ea47 tests: Check operating channel parameter in obss_scan*
It looks like these test cases can fail with the new "Undefined
secondary channel: drop OBSS scan results" case. Add more checks to
determine if something is wrong with the connection.

In addition, force clearing of the cfg80211 scan cache on the main AP
interface so that a scan result from a previous test case cannot prevent
40 MHz channel bandwidth from being used. This could apparently happen
in the following test case sequence:
ap_ht40_scan_conflict obss_scan

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-26 23:23:05 +02:00
Masashi Honma
6e450fbdbe tests: Fix ap_ht40_5ghz_disabled_sec false negative by using common finalizer
ap_ht40_5ghz_disabled_sec fails with this message.

---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------

This patch fixes the issue.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-06-26 20:42:20 +03:00
Masashi Honma
b3c8e02966 tests: Fix ap_ht40_5ghz_invalid_pair false negative by using common finalizer
ap_ht40_5ghz_invalid_pair fails with this message.

---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------

This patch fixes the issue.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-06-26 20:42:20 +03:00
Jouni Malinen
fab49f6145 tests: Python coding style cleanup (pylint3 bad-whitespace)
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-16 18:52:09 +02:00
Jouni Malinen
810dcfb667 tests: Wi-Fi generation indication for HT and VHT
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-15 02:09:41 +02:00
Jouni Malinen
ba3146e154 tests: Wait a bit after 'iw reg set 00' at the end of test cases
This is needed to avoid leaving unexpected cfg80211 regulatory country
code in place at the point when a test case terminates.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-01 11:46:50 +02:00
Jouni Malinen
2fa2b90aaf tests: Clear regulatory setting in ap_ht_op_class_* more robustly
Avoid exiting the test case with regulatory domain set to something else
than 00 (world roaming).

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-01 10:57:50 +02:00
Jouni Malinen
95cd50a1ed tests: Fix AP wait in ap_require_ht and ap_require_ht_limited_rates
These test cases seemed to have copy-paste errors where
wait_enabled=False was forgotten even though there was no additional
steps checking the AP mode startup results. This did not break the
tests, but could have resulted in slowing them down if the STAs did not
find the AP in the first scan.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-23 17:25:11 +02:00
Jouni Malinen
15b7cc5199 tests: HT STBC overrides
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-23 17:25:11 +02:00
Sergey Matyukevich
721d8558bc tests: Allow overriding HT STBC capabilities
Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
2018-12-23 17:25:11 +02:00
Jouni Malinen
1d9babdaa0 tests: HT40 disabling
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-08-21 19:07:53 +03:00
Jouni Malinen
25bd4e7beb tests: Associated STA indicating 40 MHz intolerant and hostapd deinit
This is a regression test for a forgotten ap_ht2040_timeout() eloop
timer callback on AP interface removal.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-12 21:47:43 +03:00
Jouni Malinen
80da433507 tests: Overlapping BSS scan report handling no overlap
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-03-21 22:15:29 +02:00
Jouni Malinen
fb6d648819 tests: ap_ht40_scan to print STATUS and STA information to log
This can be used to check the supported rate information.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-25 13:26:13 +02:00
Jouni Malinen
61af1e6618 tests: HT40 with both plus and minus allowed
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-29 16:35:23 +03:00
Jouni Malinen
09af451bd0 tests: Operating classes with HT20 and HT40 channels
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-26 00:17:05 +02:00
Jouni Malinen
e0a9370b3f tests: Overlapping BSS scan request (HT40+)
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-18 00:14:34 +03:00
Jonathan Afek
9fd6804d61 tests: Mark 525 tests as remote compatible
After successfully passing the 525 tests on a remote setup mark the
tests as remote compatible.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:47:37 +03:00
Jonathan Afek
31209e1434 tests: Use cmd_execute() in ap_ht clear_scan_cache()
The ap_ht tests used to execute shell commands in the tests using the
subprocess python module. Complete the move to using the cmd_execute()
general function for executing shell commands so that this would also
work on remote setups.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:10:35 +03:00
Jonathan Afek
3e3cbbd031 tests: Use cmd_execute() function in ap_ht40_scan_not_affected
The ap_ht tests used to execute shell commands in the tests using the
subprocess python module. Start using the cmd_execute() general function
for executing shell commands so that this would also work on remote
setups.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:10:35 +03:00
Jonathan Afek
113b8a1a3c tests: Use the cmd_execute() function in ap_ht for iw reg set
The ap_ht tests used to execute iw reg set command using the subprocess
python module. Start using the cmd_execute() general function for
executing shell commands so that this would also work on remote setups.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:10:35 +03:00
Jonathan Afek
6b4300d0c6 tests: Use apdev[0] more consistently in ap_ht
The test cases ap_ht40_5ghz_invalid_pair and ap_ht40_5ghz_disabled_sec
mixed use of apdev[0] and apdev[1] while only needing a single AP. This
works when both the devices are on the same host (e.g., with
mac80211_hwsim), but not when using separate remote hosts. Fix this by
using apdev[0] more consistently in these test cases.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:10:35 +03:00
Jonathan Afek
ebc6587d40 tests: Remove trailing whitespace
Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:10:35 +03:00
Jonathan Afek
cb3c0d96f4 tests: Pass full apdev to clear_scan_cache()
This is a step towards enabling the needed commands to be run on a
remote host.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:10:29 +03:00
Janusz Dziedzic
1728a2e73c tests: Replace HostapdGlobal() + remove() with hostapd.remove_bss()
This can be used to work with remote hosts.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 19:25:12 +03:00
Janusz Dziedzic
9cd6f4c015 tests: Pass apdev to hostapd.add_bss()
Pass apdev param to hostapd.add_bss(). Kill hardcoded phy param and get
phy base on apdev. These are needed to support operation with a remote
test host.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 16:18:46 +03:00
Janusz Dziedzic
8b8a1864ff tests: Pass full apdev to add_ap() function (1)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (1) converts the cases where apdev[#]['ifname'] was used as
the argument to hostapd.add_ap().

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:45:57 +03:00
Jouni Malinen
8742c81cc5 tests: HT40 co-ex scan and broken legacy/HT AP
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 22:53:58 +02:00
Jouni Malinen
ebd80f2d2e tests: HT40 on 5 GHz with disabled secondary channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 22:53:58 +02:00
Jouni Malinen
c599ddd124 tests: Allow fallback to 20 MHz in ap_ht40_5ghz_invalid_pair
This test case for enforcing that AP setup fails in case there is need
to fall back to 20 MHz channel due to invalid 40 MHz configuration.
Modify this to allow successful AP startup as long as 40 MHz channel
does not get enabled.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-02-05 17:51:24 +02:00
Jouni Malinen
f98b0e5806 tests: Make tests using multi_check() more robust
It was possible for a cached scan entry in cfg80211 from an earlier test
case to show up while verifying that the disabled AP does not show up in
scan results. This could result in invalid test failures, e.g., when
running test cases "ap_require_ht ap_multi_bss_config" multiple times
(depends a bit on timing). Make this less likely to occur by explicitly
clearing the scan cache and by stopping wlan1 from trying to associate
before stopping ap_required_ht* test cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-04 21:03:43 +02:00
Johannes Berg
3dfa519c32 tests: Work around iw scan getting stuck
On recent kernels, it seems that something changed (scheduler?)
that makes hwsim send the scan done event so quickly that iw isn't
scheduled back in to listen for it, causing iw to get stuck.

Work around this by using the scan trigger command (it'll be quick
enough so that we don't really need to wait) and the scan trigger
and dump commands where the results are required (and use a small
sleep there instead of waiting for the scan results.)

I'll try to fix this separately in iw later.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-02 21:37:10 +03:00
Jouni Malinen
d5479878b8 tests: HT40 co-ex scan conflict (HT40-)
This verifies a case where the neighboring BSS is at the other end of
the band and has its PRI channel further away.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 11:25:22 +03:00
Jouni Malinen
80dcede592 tests: HT40 co-ex scan and other BSS not affected
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-21 22:27:34 +03:00
Jouni Malinen
50a19b0107 tests: HT40 co-ex scan finding an AP advertising 40 MHz intolerant
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 16:16:11 +03:00
Jouni Malinen
f0b347b615 tests: HT40 co-ex scan conflict with HT 20 MHz AP
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 16:02:53 +03:00
Jouni Malinen
97e4688b2f tests: HT40 on 5 GHz with invalid channel pair
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 15:51:41 +03:00
Jouni Malinen
528a7d22d0 tests: VHT/HT preference in BSS selection
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-22 11:47:28 +02:00
Jouni Malinen
c4668009d0 tests: Remove unnecessary use of sudo from test cases
run-tests.py is running as root, so sudo does not need to be used
anymore from within each test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-07 15:37:13 +02:00
Jouni Malinen
2e6085c27b tests: OBSS scanning report processing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 13:26:27 +02:00
Jouni Malinen
cdebd24db6 tests: OLBC AP table error cases
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-29 21:11:41 +02:00
Jouni Malinen
d4155eb78a tests: Add some more time for olbc_ht update in olbc_5ghz
It looks like this test case is failing every now and then, so add some
more time for the olbc_ht value to get updated before reporting a
failure.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 12:55:49 +02:00
Jouni Malinen
81e787b750 tests: Convert test skipping to use exception
Instead of returning "skip" from the test function, raise the new
HwsimSkip exception to indicate a test case was skipped.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-08 22:43:47 +02:00