Commit graph

1770 commits

Author SHA1 Message Date
Jouni Malinen
96bf8fe104 tests: PKCS #8 private key with PKCS #5 v1.5 and v2.0 format
This verifies client private key use in encrypted PKCS #8 format with
PKCS #5 v1.5 format using pbeWithMD5AndDES-CBC and PKCS #5 v2.0 format
using PBES2 with des-ede3-cbc.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-05 20:27:27 +02:00
Jouni Malinen
b134397b11 tests: P2P persistent group formation, re-invocation, and cancel
Verify that P2P_CANCEL gets rejected on fully re-invoked persistent
group. This did not work properly before the last couple of commits and
before this week, the P2P_CANCEL on a separate group interface in P2p
Client role could result in use of freed memory and process termination.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-04 23:15:11 +02:00
Jouni Malinen
f98b0e5806 tests: Make tests using multi_check() more robust
It was possible for a cached scan entry in cfg80211 from an earlier test
case to show up while verifying that the disabled AP does not show up in
scan results. This could result in invalid test failures, e.g., when
running test cases "ap_require_ht ap_multi_bss_config" multiple times
(depends a bit on timing). Make this less likely to occur by explicitly
clearing the scan cache and by stopping wlan1 from trying to associate
before stopping ap_required_ht* test cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-04 21:03:43 +02:00
Jouni Malinen
d887ed3f95 tests: Fix ap_wps_er_multi_add_enrollee cleanup steps
Only one of the ERs was stopped at the end of the test case and this
could result in the following test case failing, e.g., when executing
this test case sequence: ap_wps_er_multi_add_enrollee ap_wps_upnp.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 18:19:39 +02:00
Jouni Malinen
2c68ae2b21 tests: Remove forgotten print from gas_anqp_oom_hapd
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 13:32:59 +02:00
Jouni Malinen
be4a0d0d5a tests: Make autogo_join_auto_go_neg more robust
It was possible for this test case to fail if the single attempt of
discovering the peer as part of the scan for join failed. This test case
was useful in combination with another test case:
ap_hs20_fetch_osu autogo_join_auto_go_neg

However, there is now an explicit test case (discovery_after_gas) for
this, so autogo_join_auto_go_neg can be made more robust without losing
testing coverage.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 12:37:12 +02:00
Jouni Malinen
3bba9c71c5 tests: P2P device discovery after fragmented GAS/ANQP exchange
This verifies cfg80211/mac80211 offchannel TX cancellation steps.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 12:37:12 +02:00
Jouni Malinen
850e054c0f tests: EAP-EKE local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-01 01:09:28 +02:00
Jouni Malinen
34b164dd25 tests: Fix p2p_go_move_scm_peer_does_not_support to clear avoid freqs
The P2P channel list on dev[1] at the end of
p2p_go_move_scm_peer_does_not_support was empty because all of the 2.4
GHz band got disabled by the simulated avoid frequencies driver event.
That channel list needs to be cleared prior to resetting regulatory
domain back to world roaming to get the P2P channel list updated
properly for the following test cases.

This was triggered by the following test case sequence:
p2p_go_move_scm_peer_does_not_support persistent_group_and_role_change

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 22:06:54 +02:00
Jouni Malinen
53b2100a3f tests: P2P group formation timeout with cfg80211 P2P Device
Verify that both the GO and P2P Client processing of P2P group formation
timeout removes the correct group.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 21:38:23 +02:00
Jouni Malinen
5549bead85 Revert "tests: Dynamic hwsim p2ps_channel_active_go_and_station_different_mcc"
This reverts commit 78fdab307e. This test
case needs MCC support on two stations, so the earlier attempt to handle
this with one dynamic interface is not sufficient.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-30 19:58:07 +02:00
Jouni Malinen
45e8a45bb5 tests: Show vm-run.sh command line for re-running failure sequences
Now that vm-run.sh supports a long list of test cases without crashing
the VM kernel, there is no need to use the "parallel-vm.py -1 1 <tests>"
workaround. Print the re-run example commands with vm-run.sh instead. In
addition, add the --long argument if it was specified for the test run
to avoid skipping test cases in the re-run case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 19:42:56 +02:00
Jouni Malinen
6a5f578cac tests: Force concurrent exchange in ap_wps_er_multi_add_enrollee
This makes it more likely for the two ERs to go through WPS UPnP
exchange in parallel. This was already happening every now and then and
resulted in failures. However, now that there is support for multiple
concurrent exchanges, it is useful to have this test case hit that
possibility more frequently.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 16:58:47 +02:00
Jouni Malinen
c00f19061c tests: wpa_supplicant sched_scan_plans parsing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 14:03:29 +02:00
Johannes Berg
23fcfd6004 tests: Allow passing more arguments to vm-run.sh
The script is currently limited by the maximum kernel command line
length and if that's exceeded the kernel panics at boot. Fix this by
writing the arguments to a file and reading it in the VM.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-30 14:03:28 +02:00
Jouni Malinen
f0154bf434 tests: Extend scan_dfs to cover US-disallowed channels 12 and 13
Verify that active scanning is not used in US regulatory domain on 2.4
GHz channels 12 and 13.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 14:03:23 +02:00
Jouni Malinen
d6ba709aa3 tests: EAP-TLS with SHA512/SHA384 signature
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-30 00:39:38 +02:00
Jouni Malinen
cc71035f6c tests: ap_wpa2_eap_fast_prf_oom with internal TLS implementation
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 23:57:39 +02:00
Jouni Malinen
404597e630 tests: Skip ap_wpa2_eap_ttls_dh_params_dsa with internal TLS
DH DSA parameters are not yet supported.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 21:09:44 +02:00
Jouni Malinen
686eee77d2 tests: Skip PKCS#12 tests with internal TLS client implementation
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 21:07:39 +02:00
Jouni Malinen
089e7ca372 tests: Skip dbus_connect_eap if altsubject_match is not supported
This test case fails with the current internal TLS client implementation
since the needed altsubject_match parameter is not yet supported.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 20:57:26 +02:00
Jouni Malinen
c5ef7bbfa5 tests: Fix wpas_ctrl_oom with the internal TLS implementation
One of the OOM cases does not apply for internal crypto implementation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 20:43:44 +02:00
Jouni Malinen
c675f669c3 tests: Fix wpas_ctrl_network without SAE
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 20:38:34 +02:00
Jouni Malinen
e78eb40442 tests: Skip domain_match and domain_suffix_match with internal TLS
The internal TLS client in wpa_supplicant does not yet support the
functionality needed for these test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 20:35:05 +02:00
Jouni Malinen
2286578fe0 tests: TLS v1.2 check in ap_wpa2_eap_tls_versions for internal TLS
The internal TLS implementation in wpa_supplicant supports TLS v1.2, so
verify that this version can be disabled.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 20:04:26 +02:00
Jouni Malinen
bb0a72ab46 tests: Skip OCSP test cases with the internal TLS implementation
The internal TLS client implementation does not yet support OCSP.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 19:32:45 +02:00
Jouni Malinen
0fc1b583e2 tests: ap_wpa2_eap_ttls_server_cert_hash with internal TLS client
Since the internal TLS client implementation in wpa_supplicant now has
sufficient support for this functionality, allow the test case to be
executed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 19:02:04 +02:00
Jouni Malinen
9b35afd6ac tests: Fix OOM eloop_register_sock() test cases with new gcc
gcc 4.8 vs 5.2 seem to compile eloop_register_sock() differently. With
5.2, that function name does not show up in the backtrace since
eloop_sock_table_add_sock() is used without a separate function call.
This broke the memory allocation failure checking in this test case. Fix
this by matching against the eloop_sock_table_add_sock() function which
shows up in the backtrace for both gcc versions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 20:48:16 +02:00
Jouni Malinen
d36ae37679 tests: EAP-SIM/AKA/AKA' error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 20:46:36 +02:00
Jouni Malinen
288b6f8b85 tests: Extended coverage for the EAP-SAKE attribute parser
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 12:25:22 +02:00
Jouni Malinen
ab4ea0e948 tests: EAP-SAKE local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 11:53:31 +02:00
Jouni Malinen
c49b383f45 tests: Convert eap_proto_sake to use newer design
This makes it more convenient to extend the test case with new
message exchanges.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 11:22:21 +02:00
Jouni Malinen
6f2252614c tests: Fix error message for ap_open_out_of_memory
If hostapd AP started unexpectedly, this test case would fail with
NameError due to incorrect variable name being used to construct the
exception text.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 00:23:35 +02:00
Johannes Berg
1a4f18d8f4 tests: run-tests: Print more details about NameError
If encountering a NameError, print the entire traceback so that
it's actually debuggable.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-28 00:21:20 +02:00
Jouni Malinen
b6f17f2f5c tests: ERP protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 00:18:49 +02:00
Jouni Malinen
12fff543b3 tests: Enable 802.11ac support in example wpa_supplicant config
This is needed for proper test execution. The recently added VHT 80+80
test cases started verifying channel bandwidth on the station side and
those checks fail if wpa_supplicant is built without
CONFIG_IEEE80211AC=y.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 21:11:53 +02:00
Johannes Berg
680ce356c0 tests: Honor HWSIM_TEST_LOG_DIR variable in VM runs
If /tmp has a relatively small size limit, or multiple people run the
tests on the same machine, using the same output directory can easily
cause problems.

Make the test framework honor the new HWSIM_TEST_LOG_DIR environment
variable to make it easier to avoid those problems.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-27 21:11:53 +02:00
Johannes Berg
10a15590f8 tests: Add a simple wmediumd test
If wmediumd is available on the path, test that it can forward
packets between two virtual nodes and that stopping it makes
the regular in-kernel datapath do the needed work again.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-27 21:11:53 +02:00
Jouni Malinen
f6c09bf46e tests: Remove HwsimSkip from p2p_channel
With the optimizations from the previous commits, none of the test cases
here need to be skipped.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:38:17 +02:00
Jouni Malinen
858d12f69a tests: Optimize p2p_go_move_active initial wait
There is no need to wait for the initial client timeout in this type of
test sequence since that wait can be cleared by connecting and
disconnecting a client to the group. This allows the test case to be
executed much more quickly and the dependency on --long can be removed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:37:35 +02:00
Jouni Malinen
ae248721f4 tests: Optimize p2p_go_move_reg_change initial wait
There is no need to wait for the initial client timeout in this type of
test sequence since that wait can be cleared by connecting and
disconnecting a client to the group. This allows the test case to be
executed much more quickly and the dependency on --long can be removed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:35:51 +02:00
Jouni Malinen
63b87a5aeb tests: Optimize p2p_go_move_scm_multi initial wait
There is no need to wait for the initial client timeout in this type of
test sequence since that wait can be cleared by connecting and
disconnecting a client to the group. This allows the test case to be
executed much more quickly and the dependency on --long can be removed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:31:44 +02:00
Jouni Malinen
3acf68feb9 tests: Convert p2p_go_move_scm_multi to use dynamic hwsim
Use a dynamically added HWSimRadio to allow the MCC case to be covered
with a single test run with the mac80211_hwsim default radios disabling
MCC.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:30:02 +02:00
Jouni Malinen
d18df681b0 tests: Convert p2p_go_move_scm_peer_does_not_support to dynamic hwsim
Use a dynamically added HWSimRadio to allow the MCC case to be covered
with a single test run with the mac80211_hwsim default radios disabling
MCC.

In addition, remove dependency on --long since this test case does not
really take that long.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:27:25 +02:00
Jouni Malinen
f0b39e057a tests: Convert p2p_go_move_scm_peer_supports to use dynamic hwsim
Use a dynamically added HWSimRadio to allow the MCC case to be covered
with a single test run with the mac80211_hwsim default radios disabling
MCC.

In addition, remove dependency on --long since this test case does not
really take that long (just couple of seconds).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:24:33 +02:00
Jouni Malinen
b98445f6ba tests: Optimize p2p_go_move_scm initial wait
There is no need to wait for the initial client timeout in this type of
test sequence since that wait can be cleared by connecting and
disconnecting a client to the group. This allows the test case to be
executed much more quickly and the dependency on --long can be removed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:22:30 +02:00
Jouni Malinen
262825e896 tests: Convert p2p_go_move_scm to use dynamic hwsim
Use a dynamically added HWSimRadio to allow the MCC case to be covered
with a single test run with the mac80211_hwsim default radios disabling
MCC.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:14:38 +02:00
Jouni Malinen
1002684e11 tests: Convert p2p_go_move_active to use dynamic hwsim
Use a dynamically added HWSimRadio to allow the MCC case to be covered
with a single test run with the mac80211_hwsim default radios disabling
MCC.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:11:27 +02:00
Jouni Malinen
78fdab307e tests: Dynamic hwsim p2ps_channel_active_go_and_station_different_mcc
Convert p2ps_channel_active_go_and_station_different_mcc to use a
dynamically added HWSimRadio to allow the MCC case to be covered with a
single test run with the mac80211_hwsim default radios disabling MCC.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:01:10 +02:00
Jouni Malinen
d2e7cfc0bd tests: Use wlantest without capture file write buffering
This makes the run_tshark() operations more reliable while still
allowing to reduce the extra wait by forcing wlantest to flush the
packets to the pcapng file.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 00:12:38 +02:00