Commit graph

1621 commits

Author SHA1 Message Date
Jouni Malinen
6da3b745f1 tests: Try users2.pkcs12 twice to add coverage
This allows manual verification of extra PKCS#12 certificate processing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-11 01:10:15 +03:00
Jouni Malinen
f59b946e39 tests: AP with open mode and wpa_supplicant ENABLE/DISABLE_NETWORK
ap_open_sta_enable_disable verifies that DISABLE_NETWORK that is issued
while connect/sme-connect radio work is pending is effective, i.e.,
prevents connection to disabled network.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-10 22:16:49 +03:00
Ilan Peer
7a2e562396 tests: Properly pass the num of channels to start.sh
The number of channels was not properly passed from the
run-all.sh script to the start.sh script. Fix it.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-08-10 21:10:56 +03:00
Jouni Malinen
492f007ec5 tests: Various wpa_supplicant ctrl_iface OOM cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-08 23:52:43 +03:00
Jouni Malinen
5a145a55a1 tests: Verify FAIL-BUSY return on SCAN during gas_comeback_delay
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-08 20:52:29 +03:00
Jouni Malinen
ecafa0cf47 tests: RSN element protocol testing for STA side
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-08 20:04:07 +03:00
Jouni Malinen
e1eb0e9e6e tests: AP config using wps_config command with invalid passphrase
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-06 20:47:25 +03:00
Jouni Malinen
133716a722 tests: P2PS with group interface and intended iface addr in PD
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-06 20:47:25 +03:00
Max Stepanov
dbc21b1a81 tests: Add P2PS PD feature capability CPT tests
Add tests verifying a Coordination Protocol Transport exchange and
selection during P2PS provision discovery.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-08-06 20:47:25 +03:00
Andrei Otcheretianski
3c72383e03 tests: Re-factor PD and connection flows in P2PS tests
Reuse p2ps_provision() and p2ps_connect_pd() methods, and
remove the previous PD helper functions which are no longer used.

This fixes the previously "broken"
p2ps_connect_keypad_method_nonautoaccept and
p2ps_connect_display_method_nonautoaccept.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-08-06 20:47:19 +03:00
Andrei Otcheretianski
2f0f69a9ec tests: Use p2ps_provision() and p2ps_connect_pd() in p2ps_connect_p2ps_method()
Re-factor p2ps_connect_p2ps_method() so it reuses generic P2PS provision
and connection flows.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-08-06 20:45:15 +03:00
Ilan Peer
ab653ed2f6 tests: Add P2P GO frequency change policy tests
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-08-04 19:15:44 +03:00
Ilan Peer
48dd5e4da8 tests: Increase timeouts when MCC is enabled
When MCC is enabled, the remain of channel scheduling might
incur additional delays, so increase the timeouts to be able
to receive delays frames.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-08-04 19:03:24 +03:00
Ilan Peer
1977de368b tests: Skip some test cases when MCC is enabled
Some tests assume that only a single channel is used. Skip,
such tests/checks when MCC is enabled.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-08-04 19:03:21 +03:00
Jouni Malinen
6fad40df9e tests: Make dbus_p2p_group_termination_by_go more robust
Set peer_group_removed only if peer_group_added has already been set.
This fixes an issue where a propertiesChanged event triggered by an
earlier test case was able to get dbus_p2p_group_termination_by_go
terminated too early. This happened, e.g., with sequence
"dbus_p2p_two_groups dbus_p2p_group_termination_by_go".

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-03 18:52:10 +03:00
Jouni Malinen
5a21764994 tests: Avoid exception in dbus_p2p_two_groups
Only run peerJoined() steps once to avoid trying to use GetAll() on an
already removed group and double-removal of a group. This did not make
the test case fail, but the exception is printed out in pretty confusing
way to stdout, so better get rid of it.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-03 18:44:53 +03:00
Jouni Malinen
0e7cde7619 tests: hostapd ctrl_iface LOG_LEVEL
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-03 17:54:31 +03:00
Jouni Malinen
47824e0dbc tests: Fix hostapd debug level
Remove the duplicated -ddKt command line argument to avoid setting
hostapd debug level to EXCESSIVE.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-03 17:53:52 +03:00
Johannes Berg
3dfa519c32 tests: Work around iw scan getting stuck
On recent kernels, it seems that something changed (scheduler?)
that makes hwsim send the scan done event so quickly that iw isn't
scheduled back in to listen for it, causing iw to get stuck.

Work around this by using the scan trigger command (it'll be quick
enough so that we don't really need to wait) and the scan trigger
and dump commands where the results are required (and use a small
sleep there instead of waiting for the scan results.)

I'll try to fix this separately in iw later.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-02 21:37:10 +03:00
Jouni Malinen
a0e117c684 tests: P2P extended listen timing operations
This verifies P2P extended listen timing operations by confirming that a
peer is not discoverable during the provisioning step and that the peer
becomes discoverable after having removed the group during such
provisioning step. The latter case was broken until the 'P2P: Cancel
group formation when deleting a group during group formation' commit.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 21:37:10 +03:00
Jouni Malinen
20fd8defa0 tests: D-Bus PropertiesChanged events on P2P Peer.Groups
Verify that Groups list for a P2P Peer gets updated properly on group
addition and removal (three different paths).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 21:37:09 +03:00
Jouni Malinen
a2bc326e1e tests: Run Suite B test cases with OpenSSL 1.1.0
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 17:11:47 +03:00
Jouni Malinen
a00b218651 tests: Skip ERP tests with EAP methods that are not supported
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
597516df79 tests: Skip LEAP tests if not included in the build
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
24072e17bc tests: Skip IEEE 802.1X dynamic WEP tests in FIPS mode
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
a1eabc74b8 tests: Skip WPA(V1) test cases in FIPS mode
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
38934ed100 tests: Skip ap_wpa2_eap_psk_oom and ap_ft_oom in FIPS mode
omac1_aes_128() implementation within crypto_openssl.c is used in this
case and that cannot fail the memory allocation similarly to the
non-FIPS case and aes-omac1.c.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
06cdd1cd79 tests: Allow FIPS error case for openssl_cipher_suite_config_wpas
OpenSSL rejects the cipher string 'EXPORT' in FIPS mode in a way that
results in the locally generated error showing up before the EAP method
has been accepted.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
0392867b6b tests: Skip EAP-pwd NTHash test in FIPS build
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
c8e82c94da tests: Skip EAP-IKEV2 tests if not included in the build
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
e7ac04ceaf tests: Skip EAP-MD5 and EAP-MSCHAPV2 test cases in FIPS mode
These would require MD5 or MD4 which are not allowed in FIPS mode.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
ca158ea621 tests: Skip EAP-TTLS/CHAP, MSCHAP, MSCHAPV2 test cases in FIPS mode
In addition, replace some of the CHAP cases with PAP since that enables
more coverage without breaking the main test focus.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
d35b0227c1 tests: Use openssl pkcs12 -descert workaround to allow FIPS mode
The PKCS12 file with default openssl options cannot be used with OpenSSL
1.0.1 in FIPS mode. Replace this with -descert version as a workaround.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
b2a1f26259 tests: Set FIPSLD_CC=gcc (if not set) to make CONFIG_FIPS=y use easier
This makes it easier to build wpa_supplicant for OpenSSL FIPS mode
testing. wpa_supplicant/.config needs following type of configuration
for this:
CONFIG_FIPS=y
CFLAGS += -I/usr/local/ssl/include
LIBS += -L/usr/local/ssl/lib
CC=/usr/local/ssl/fips-2.0/bin/fipsld

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-01 16:57:04 +03:00
Jouni Malinen
72f460a27b tests: Support non-social oper channel in persistent_group_per_sta_psk
This allows driver-based preference list to override default operating
channel selection mechanism by using a non-social P2P find if needed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-31 15:24:45 +03:00
Jouni Malinen
191d8c4f78 tests: Make wifi_display enforce social channel as operating channel
Previously, this was assumed to be the case due to default channel
selection behavior. However, that may not be the case with driver-based
preference list processing. Enforce a social channel to be used as the
operating channel here since dev[2] uses social channel only device
discovery and needs to find the GO.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-31 15:24:45 +03:00
Jouni Malinen
9dd21d5183 tests: Allow local disconnect in openssl_cipher_suite_config_wpas
The openssl_ciphers="EXPORT" case may result in locally generated
disconnection event if the OpenSSL version used in the build rejects
export ciphers in default configuration (which is what OpenSSL 1.1.0
will likely do). Don't report a test case failure in such a case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-28 21:00:18 +03:00
Jouni Malinen
d8aa603d53 tests: Skip fst_attach_wpas_error if no FST support
This check for FST testing support was forgotten from one of the new FST
test cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-28 18:56:33 +03:00
Max Stepanov
aff4b2c139 tests: Add CPT parameters to p2ps_provision()
Add adv_cpt and seeker_cpt parameters to p2ps_provision() function.
The seeker_cpt is used in P2P_ASP_PROVISION command by a seeker, the
adv_cpt parameter is in P2P_ASP_PROVISION_RESP by an advertiser.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:20 +03:00
Max Stepanov
5e9d05115f tests: Add CPT parameter to p2ps_advertise()
Add an optional parameter to p2ps_advertise() function allowing to
specify CPT priority values.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:20 +03:00
Max Stepanov
c1e31bdb7f tests: Add CPT parameter to WpaSupplicant asp_provision()
Add an optional CPT parameter to asp_provision() method of
WpaSupplicant.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:19 +03:00
Andrei Otcheretianski
e999e56c2c tests: Add p2ps_connect_pd() method
Add p2ps_connect_pd() helper method which strictly validates the PD
results and establishes the connection between peers accordingly.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-26 21:45:35 +03:00
Andrei Otcheretianski
4796021088 tests: Add p2ps_provision() method
Add generic provision method. This method receives a seeker and an
advertiser devices, advertisement id, method, and a flag which indicates
whether deferred flow is expected. The method returns P2PS-PROV-DONE
events and the pin (if keypad or display method is used).

This method is needed to simplify the P2PS provision flows in the tests.
This method complies to the P2PS specification regarding the expected
order of the show and display PIN events.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-26 21:45:35 +03:00
Andrei Otcheretianski
1a1b015622 tests: Add asp_provision method to wpa_supplicant
Add asp_provision method which issues either P2PS PD Request or, if the
status is provided, continues the deferred flow by sending follow on
PD Request.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-26 21:45:35 +03:00
Jouni Malinen
f751368ec3 tests: Make discovery_auto more robust
This test case could fail if there were old BSS entries remaining in
cfg80211 scan results. That happened, e.g., when running test cases in
the following sequence: "discovery_social_plus_one discovery_auto".

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:45:14 +03:00
Jouni Malinen
898b33095e tests: FST SESSION_INITIATE and SESSION_RESPOND error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:45:14 +03:00
Jouni Malinen
78ca254237 tests: More FST GET_PEER_MBIES coverage
The case of valid but unknown peer address was not covered previously.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:45:13 +03:00
Jouni Malinen
54b227a1ff tests: Use a shared FST setup function
This removes quite a bit of duplicated code. In addition, this starts
using different FST group names to get additional coverage.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:45:13 +03:00
Jouni Malinen
1f9427c9cd tests: Explicitly close hostapd global control socket on RELOG
Without this, the run-tests.py socket could have been left in attached
to receive all hostapd global events during a test case. This could hit
the limit of pending messages on the socket since there is nothing
clearing this socket during the execution of a test case. Fix this by
explicitly closing the socket after having completed the RELOG command.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:12:09 +03:00
Jouni Malinen
5994658309 tests: FST attach errors in wpa_supplicant
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:12:09 +03:00
Jouni Malinen
6e2536fc79 tests: FST Setup Request processing and OOM during MBIE update
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:12:09 +03:00
Jouni Malinen
2fffbd4db8 tests: FST setup multiple times
This verifies FST group dialog_token wrap-around and behavior with large
number of session setups and teardowns.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:12:09 +03:00
Jouni Malinen
3aa1ca9aec tests: Additional FST Setup test coverage
This adds a test case that goes through session initialization through
separate commands that can be modified more easily for special case. The
first such special case is using special FST Setup Request frames with
non-standard MBIE contents to hit different code paths for finding the
interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:12:08 +03:00
Jouni Malinen
9162eed42b tests: Extend fst_ap_ctrl_iface to support existing groups
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:12:08 +03:00
Jouni Malinen
6c247100e8 tests: FST protocol tests to verify invalid STIE header
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 11:22:21 +03:00
Jouni Malinen
8936b095ea tests: Fix ap_wps_wpa_cli_action outside VM
Pass absolute path to the daemonized wpa_cli process and add read
privileges for everyone on the action script to make this test case work
better when run without a VM.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-23 20:48:33 +03:00
Jouni Malinen
569f8f9b87 tests: eloop socket re-open from timeout/socket handler
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-23 18:39:02 +03:00
Jouni Malinen
2602a2ff9e tests: WPS events and wpa_cli action script
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-22 17:12:07 +03:00
Anton Nayshtut
4be0dd2232 tests: hostapd DUP_NETWORK
This test checks the functionality of DUP_NETWORK global control
inteface command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-21 13:56:19 +03:00
Jouni Malinen
7b7e8a2ee7 tests: Use codecov build hostapd/wpa_supplicant in FST tests
Try to use the special build for --codecov purposes, if present, instead
of hardcoding the hostapd/wpa_supplicant binary to the default location.
This is needed to collect code coverage correctly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 23:10:55 +03:00
Jouni Malinen
ccfe3e5db9 tests: wpa_supplicant ctrl_iface network OOM in string parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 23:07:04 +03:00
Jouni Malinen
523061996c tests: wpa_supplicant control interface wait for client
This test case is also adding code coverage for process daemonizing and
Linux tracing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 23:07:04 +03:00
Jouni Malinen
5b0afb0a29 tests: UUID parsing error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 22:04:50 +03:00
Jouni Malinen
bd4b9ee5ca tests: NFC connection handover to form a new P2P group and IP pool OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 17:28:44 +03:00
Jouni Malinen
ccf4d7644a tests: WPS ER OOM in XML processing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 16:44:51 +03:00
Jouni Malinen
2c3a019083 tests: Initial AP configuration and OOM during PSK generation
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 16:31:12 +03:00
Jouni Malinen
3b765ea545 tests: FST-MANAGER TEST_REQUEST error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 19:29:39 +03:00
Jouni Malinen
7ba240b90f tests: FST protocol testing for Ack Response
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 19:08:06 +03:00
Jouni Malinen
ca73f7d2d0 tests: FST protocol testing for Setup Response
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 19:06:31 +03:00
Jouni Malinen
6b294e57a5 tests: Speed up fst_proto by waiting for MGMT-TX-STATUS event
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 19:05:31 +03:00
Jouni Malinen
4390030a51 tests: FST-MANAGER TEST_REQUEST GET_FSTS_ID and ID not found
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 17:23:55 +03:00
Jouni Malinen
e84297a8e6 tests: FST-MANAGER SESSION_RESPOND failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 17:23:55 +03:00
Jouni Malinen
feb64551d9 tests: FST-MANAGER SESSION_ADD OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 17:23:55 +03:00
Jouni Malinen
f067a05589 tests: FST-MANAGER SESSION_SET parameter parsing error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 17:23:55 +03:00
Jouni Malinen
a248e29dac tests: FST-ATTACH OOM in fst_iface_create()
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 11:13:20 +03:00
Jouni Malinen
3da112c5af tests: Use direct fst_test_common access
There is no need to go through fst_module_aux to reach fst_test_common
since both of these get imported here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 11:02:46 +03:00
Jouni Malinen
febd7a4c40 tests: FST attach with llt=0
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 11:01:44 +03:00
Jouni Malinen
742408afa8 tests: Verify wpa parameter in hostapd GET_CONFIG
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-18 00:20:23 +03:00
Jouni Malinen
b6387212f5 tests: Add coverage for new vht_capab values
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-18 00:00:20 +03:00
Jouni Malinen
087632168b tests: Add hostapd interface with driver specified
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 23:57:04 +03:00
Jouni Malinen
f752fd9264 tests: FST session create OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:14:15 +03:00
Jouni Malinen
19a0602d86 tests: FST send action OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:14:15 +03:00
Jouni Malinen
d99ed42a15 tests: FST AP configuration and OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:14:15 +03:00
Jouni Malinen
5e2ad41da3 tests: FST protocol testing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:14:15 +03:00
Jouni Malinen
6f3815c0da tests: WPA2-PSK-FT RRB protocol testing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 11:16:15 +03:00
Anton Nayshtut
6f7b96145f tests: hostapd global-to-local control interface redirection
This implements basic global-to-local control interface command
redirection tests.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 20:23:26 +03:00
Jouni Malinen
2531dc9f6b tests: wpa_supplicant ctrl_iface DUP_NETWORK (global)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
c0183847d9 tests: Silence unnecessary get_driver_status() prints
Commit 53606b105c ('tests: Wait for scan
to complete on all interfaces in reset()') added option of passing
ifname to get_driver_status(). This could result in FAIL-NO-IFNAME-MATCH
returns that get printed out in "Ignore unexpected status-driver line"
messages if the interface is not found. Check for this case to avoid
that unnecessary print.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
85eb89fe56 tests: FST with RSN
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
86ba832cf2 tests: FST AP setup failing due to OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
d6d549c47c tests: FST control interface behavior
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Anton Nayshtut
41a256ecd9 tests: Add FST module tests
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
dca95e6924 tests: Invalid P2PS attribute parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-13 00:51:15 +03:00
Jouni Malinen
2496adf046 tests: IEEE 802.1X and EAPOL Authenticator aWhile handling
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-12 11:45:16 +03:00
Jouni Malinen
b7bdfb68f2 tests: IEEE 802.1X and EAPOL_SET command
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-12 11:34:18 +03:00
Jouni Malinen
a32a6d2ca2 tests: IEEE 802.1X and EAPOL_REAUTH request
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-12 11:34:16 +03:00
Jouni Malinen
778325501b tests: More coverage for EAPOL Authenticator state dump
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-12 00:20:44 +03:00
Jouni Malinen
6c4b5da46d tests: EAP-TLS and TLS version configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-08 19:52:14 +03:00
Andrei Otcheretianski
1ee6dd2671 tests: Few trivial cleanups to P2PS tests
Remove unused variables and replace split(" ") with just split().

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-08 16:52:42 +03:00
Andrei Otcheretianski
53606b105c tests: Wait for scan to complete on all interfaces in reset()
When WpaSupplicant executes reset() it waits until all the ongoing scans
are completed. However, it checks the status of the wlanX interface
only. If a dedicated P2P device interface is used, scan may be still
running on the P2P Device interface, e.g., due to P2P_FIND. This might
affect subsequent tests.

Fix this by waiting until the scan is done both on wlanX and P2P
Device interfaces.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-08 16:52:42 +03:00