Commit graph

2380 commits

Author SHA1 Message Date
Jouni Malinen
0c8d7b085c tests: wpa_supplicant BSS CURRENT command
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-21 12:46:14 +02:00
Jouni Malinen
969e525091 tests: Skip eap_tls_pkcs8_pkcs5_v15 with BoringSSL
It does not look like BoringSSL allows pbeWithMD5AndDES-CBC to be used
to protect the local private key, so skip this test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-21 12:31:20 +02:00
Jouni Malinen
e297cc0d23 tests: P2P service discovery restarted immediately
This test case verifies that SD Response frame does not block the
following remain-on-channel operation unnecessarily long.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-21 00:21:37 +02:00
Jouni Malinen
ad02e79d12 tests: Disable HT in ap_wds_sta_wep
HT cannot be used with WEP-only network, so don't try to do that here.
This get rids of some unnecessary Beacon frame updates during
disassociation/association and can make the test case a bit more robust.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-19 22:47:07 +02:00
Jouni Malinen
aed9e23ae5 tests: WPS ER enrolling a new device to a configured AP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-19 17:44:51 +02:00
Jouni Malinen
6c44d97b04 tests: D-Bus P2P discovery on a specific non-social channel
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-19 13:18:05 +02:00
Jouni Malinen
74d29544f1 tests: RSN AP and PeerKey between two STAs with sniffer check
The previous PeerKey test cases did not actually verify in any way that
the SMK and STK exchanges were completed since mac80211 does not support
setting the key from STK. Use a sniffer check to confirm that the
exchanges complete to avoid PeerKey regressions like the ones fixed in
the last couple of commits.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-18 20:28:10 +02:00
Jouni Malinen
bae93012cd tests: mac80211 and unknown Action frame rejection in STA mode
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-18 13:01:49 +02:00
Jouni Malinen
0851a180b9 tests: Verify hostapd mgmt_tx() success
Raise an exception if MGMT_TX command to hostapd fails. Previously, such
errors were ignored silently.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-18 13:01:49 +02:00
Jouni Malinen
1a4b4c8466 tests: Update gas_anqp_capab_list and gas_anqp_extra_elements
The FILS ANQP-element changes made couple of the generic ANQP test steps
fail. Update this to ignore the special FILS cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-18 13:01:49 +02:00
Jouni Malinen
1a73f53a65 tests: FILS SK and multiple realms
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-18 11:41:59 +02:00
Jouni Malinen
f82bc83264 tests: Add fils_realm for existing FILS test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-17 22:08:25 +02:00
Jouni Malinen
670d5eba05 tests: Fix FST scanning for non-FST APs
The sta2.scan() calls were performing full scan of all channels and
reporting only the BSS entry that happened to be the first one in the
wpa_supplicant list. This is problematic since it is possible that the
target AP was not found and incorrect BSS was selected and used for
setting scan_freq which made the connection fail. Furthermore, there is
no need to use full scan for these test cases, so use a single channel
scan instead.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-15 14:17:14 +02:00
Jouni Malinen
0a425e0f04 tests: Make p2p_ext_vendor_elem_go_neg_conf more robust
Use P2P listen mode on dev[1] to speed up GO Negotiation and explicitly
wait for successfully completed GO Negotiation to make the failure cases
clearer. Previously, it was possible for the GO Negotiation to fail and
execution to go to the tshark check even when no GO Negotiation Confirm
frame was sent.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-14 16:33:19 +02:00
Jouni Malinen
bb5d761c2e tests: Do not attach wpa_supplicant monitor interface unnecessarily
There is no need to attach the monitor interface was events when issuing
only a single INTERFACES command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-14 13:56:15 +02:00
Jouni Malinen
10f312d4a6 tests: Use longer timeout in p2p_go_neg_auth_result()
It is possible for the P2P-GROUP-STARTED event to get delayed more than
one second especially when the GO Negotiation responder becomes the P2P
Client and the system is heavily loaded. Increase the default timeout
for the expected success case from 1 to 5 seconds to avoid failing test
cases that would have succeeded if given a bit more time to complete the
exchange.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-14 12:45:37 +02:00
Jouni Malinen
4198e43309 tests: Properly skip pmksa_cache_ctrl_ext if PMKSA_GET is not supported
Mark the test as skipped instead of failed if wpa_supplicant is built
without PMKSA_GET support.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-13 20:13:42 +02:00
Jouni Malinen
3301e925b7 tests: Make dbus_p2p_go_neg_init more robust
It was apparently possible to get a propertiesChanged event from an
earlier test case with an empty Groups property. That ended up this case
exiting immediately before running through the steps and consequently,
failing due to missed operations. Make this less likely to happen by
accepting the Groups property emptying event only after a group has been
added for a peer first.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-13 20:07:52 +02:00
Jouni Malinen
0aca60b84c tests: Fix scan_reqs_with_non_scan_radio_work error reporting
Raise an exception instead of printing out to stdout if scan fails to
complete.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-13 20:07:52 +02:00
Jouni Malinen
58bd7dc341 tests: Scan and both Beacon and Probe Response frame IEs
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-13 20:07:52 +02:00
Jouni Malinen
a00a3458ed tests: Make ap_track_sta_no_probe_resp more robust
Check whether the unexpected BSS entry is based on having received a
Beacon frame instead of Probe Response frame. While this test case is
using a huge beacon_int value, it is still possible for mac80211_hwsim
timing to work in a way that a Beacon frame is sent. That made this test
case fail in some rare cases. Fix this by ignoring the BSS entry if it
is based on Beacon frame instead of Probe Response frame.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-13 20:07:52 +02:00
Jouni Malinen
e3b38d6e04 tests: Mesh network on 5 GHz band and 20/40 coex change
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-13 20:07:52 +02:00
Jouni Malinen
8344ba1229 tests: Remove pmk_r1_push parameter from ap_ft_local_key_gen
Local key generation for FT-PSK does not use the AP-to-AP protocol and
as such, setting pmk_r1_push=1 is a bit confusing here since it gets
ignored in practice. Remove it to keep the test case easier to
understand.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-13 13:57:39 +02:00
Jouni Malinen
3615bde6fe tests: Clear scan cache at the end of ap_wps_per_station_psk_failure
It was possible for ap_wps_per_station_psk_failure to leave behind scan
entries with active PBC mode if cfg80211 BSS table. This could result in
a following test case failing due PBC overlap. Fix this by clearing the
cfg80211 BSS table explicitly.

This was found with the following test case sequence:
ap_wps_per_station_psk_failure autogo_pbc

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-13 13:03:52 +02:00
Jouni Malinen
fb748ae858 tests: PMKSA cache control interface for external management
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-12 23:56:57 +02:00
Jouni Malinen
f0df5afa08 tests: PMKSA cache control interface events
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-12 21:02:49 +02:00
Jouni Malinen
b49871ecc1 tests: Fix wpas_ap_acs after 5 GHz use
Work around the mac80211_hwsim limitation on channel survey by forcing
the last connection to be on 2.4 GHz band. Without this, wpas_ap_acs
would have failed to start the AP if the previous test case used the 5
GHz band.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-12 00:58:00 +02:00
Jouni Malinen
d283f7aeac tests: Increase timeout in wpas_mesh_password_mismatch
There has been number of failures from this test case due to the
MESH-SAE-AUTH-FAILURE event from dev[0] and dev[1] arriving couple of
seconds after the one second timeout after the dev[2] events. This does
not look like a real issue, so increase the timeout to five seconds to
make this less likely to show false failures during testing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-11 20:08:39 +02:00
Jouni Malinen
58a5c4ae77 tests: Verify wpa_state after INTERWORKING_SELECT
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-11 19:51:09 +02:00
Jouni Malinen
15aa804285 tests: Make scan_trigger_failure more informative
If wpa_state is left to SCANNING by a previously executed test case,
scan_trigger_failure will fail. Instead of waiting for that failure,
check for wpa_state at the beginning of the test case and report a more
helpful error message if the test case would fail due to a previously
executed test case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-11 18:41:04 +02:00
Johannes Berg
c7c4600260 tests: Add kernel BSS leak tests
Add two tests that check if the kernel BSS leak (when we get a deauth or
otherwise abandon an association attempt) is present in the kernel. This
is for a long-standing cfg80211/mac80211 issue that got fixed with the
kernel commit 'cfg80211/mac80211: fix BSS leaks when abandoning assoc
attempts'.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-12-11 12:45:08 +02:00
Jouni Malinen
52358b08f5 tests: P2P device discovery and peer changing device name
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-11 12:45:08 +02:00
Jouni Malinen
71676559ca tests: Peer disabling Wi-Fi Display advertisement
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-11 12:45:08 +02:00
Jouni Malinen
0ef0921a1b tests: Ongoing scan and FLUSH
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-11 12:45:08 +02:00
Jouni Malinen
79124c7ba1 tests: Scan and only_new=1 multiple times
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-10 17:04:08 +02:00
Jouni Malinen
a1a60635a8 tests: Make p2ps_wildcard_p2ps more robust
The final check in this test case was issuing a new P2P_FIND command
immediately after the P2P_SERVICE_DEL command on the peer. It looked
like it was possible for the scan timing to go in a sequence that made
the new P2P_FIND operation eventually accept a cfg80211 BSS entry from
the very end of the previous P2P_FIND. This resulted in unexpected
P2P-DEVICE-FOUND event even though there was no new Probe Response frame
from the peer at that point in time.

Make this less likely to show unrelated failures by waiting a bit before
starting a new P2P_FIND operation after having changes peer
configuration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-10 00:33:33 +02:00
Jouni Malinen
29bf636e12 tests: WEP to WPA2-PSK configuration change in hostapd
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-05 21:30:17 +02:00
Jouni Malinen
609be6f7c0 tests: P2P group formation with VHT 80 MHz
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-05 21:14:55 +02:00
Jouni Malinen
813ebc51bd tests: Check data connectivity after supplicant triggered EAP reauth
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-05 21:01:43 +02:00
Jouni Malinen
d1ea80361b tests: AP with open mode and external association
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-05 12:16:12 +02:00
Michael Braun
80fe420ab2 tests: Verify multicast_to_unicast operation
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-12-04 21:42:46 +02:00
Jouni Malinen
27b698338f tests: Scanning and AP changing channels
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-03 18:53:36 +02:00
Jouni Malinen
82fff2c711 tests: P2P provision discovery while GO/CLI
These test cases verify that there is no duplicate processing of P2P
Action frames while operating in a P2P group.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-03 10:58:39 +02:00
Jouni Malinen
f0b6d1edfb tests: WDS 4addr behavior on reassociation and with open and WEP
This extends the ap_wds_sta test case to cover post-reassociation case
(both with and without Authentication frame exchange) and add similar
test cases to cover open and WEP cases in addition to this existing
WPA2-PSK test case.

These cover functionality testing for the previous fix in
reassociation-without-new-authentication case. In addition, these find a
new mac80211 issue for the WEP + 4addr combination.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-02 12:53:07 +02:00
Jouni Malinen
86f938ddea tests: PMF and Authentication frame injection
Verify that AP does not break PMF-enabled connection due to injected
Authentication frame. This is a regression test for
NL80211_FEATURE_FULL_AP_CLIENT_STATE changes resulting in dropping the
key in such a case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-29 16:26:00 +02:00
Jouni Malinen
c85fcff2b1 tests: WPA2-PSK-FT AP with WPA2-PSK enabled and unexpected MDE
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-11-26 11:39:44 +02:00
Jouni Malinen
bacbb62294 tests: Beacon frame TX rate configuration
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-26 00:36:50 +02:00
Jouni Malinen
dff690b859 tests: Random MAC address in scans while connected
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-25 22:52:39 +02:00
Jouni Malinen
afe280539b tests: D-Bus P2P and IP address parameters
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-21 14:45:13 +02:00
Jouni Malinen
242fc738a0 tests: GAS/ANQP and Capability List ANQP-element
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-17 16:00:59 +02:00
Jouni Malinen
8e5c2c208e tests: GAS/ANQP and Venue URL
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-17 16:00:59 +02:00
Jouni Malinen
96a5b80958 tests: Make ap_interworking_scan_filtering more robust
It was possible for the first wt.clear_bss_counters(bssid) call to fail
the test if timing worked out in a way that the wlantest process had not
received any Beacon frames from the first AP. Run a directed scan for
both of the BSSs before starting the test validation steps to make sure
such a case cannot fail this test case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-10-29 22:23:53 +03:00
Jouni Malinen
baa8f5ba26 tests: hostapd stationary_ap=1 in neighbor DB
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-10-29 19:25:39 +03:00
Jouni Malinen
8618b3c221 tests: Open AP and TDLS prohibited
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-29 00:28:17 +03:00
Jouni Malinen
09b306b1e5 tests: Avoid failures in ap_vlan_without_station with new kernel
The kernel commit 'mac80211: filter multicast data packets on AP /
AP_VLAN' started filtering out the test frame used in
ap_vlan_without_station and that resulted in false failures. For now,
ignore that "error" case to avoid claiming failures when the kernel is
doing what it is expected to do.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 21:37:19 +03:00
Jouni Malinen
b64fa750b6 tests: Enable FILS in the example hwsim build configurations
This allows the new FILS test cases to be executed automatically when a
recent enough kernel version is used.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 16:06:13 +03:00
Jouni Malinen
7d8da7c837 tests: FILS
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-26 00:41:04 +03:00
Jouni Malinen
74b23fafe9 tests: WPS PBC with two APs advertising same SSID
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-11 00:30:15 +03:00
Jouni Malinen
677c2283e7 tests: Update eap_proto_psk_errors and ap_wpa2_eap_psk_oom
The extension of aes_128_ctr_encrypt() to allow AES-192 and AES-256 to
be used in addition to AES-128 for CTR mode encryption resulted in the
backtrace for the function calls changing. Update the test cases that
started failing due to that change.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-10 20:27:31 +03:00
Jouni Malinen
a8ef83f49d tests: Mesh network and SELECT_NETWORK
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-10-09 17:09:56 +03:00
Michael Braun
150948e68b test: FT: EAP test for mismatching keys
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-10-09 12:02:23 +03:00
Michael Braun
d0175d6e48 test: FT with locally generated PMK-R0/PMK-R1 from PSK
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-10-09 12:01:34 +03:00
Jouni Malinen
c64b454a2f tests: Fix wpas_ctrl_sched_scan_plans without WPA_TRACE
This test case did not clear sched_scan_plans if alloc_fail() resulted
in skipping the test case. This would result in the following
autoscan_exponential and autoscan_periodic test cases failing.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-03 11:35:42 +03:00
Avraham Stern
8181c13a8d tests: Fix cfg80211_tx_frame test
In case that a dedicated P2P Device interface is used, a new interface
must be create for a P2P group. Thus, in order to send mgmt
frames, attach a new WpaSupplicant object to the newly created group
and use this object for sending the frames.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2016-10-02 21:27:43 +03:00
Ilan Peer
401ff12799 tests: Use global control interface to remove P2P networks
Use the global control interface to remove P2P networks in
persistent_group_peer_dropped3 to support configurations that use a
dedicated P2P Device interface.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-10-02 21:16:55 +03:00
Avraham Stern
a71a3d6d46 tests: Fix p2p_ext_vendor_elem_assoc test with P2P Device interface
For configurations that use a dedicated P2P Device interface, which
mandates that a separate interface is used for the P2P group, vendor
specific IE's must be added to the VENDOR_ELEM_P2P_* frame types in
order to be used by the P2P group interface. The VENDOR_ELEM_ASSOC_REQ
(13) parameter would need to be issued on the group interface which
would be challenging to do due to timing in case a separate group
interface gets used.

In case a dedicated P2P Device interface is used, don't include a test
for VENDOR_ELEM_ASSOC_REQ to avoid failing this part of the test case.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-10-02 19:57:34 +03:00
Jouni Malinen
d57ca5cd45 tests: Fix ap_track_taxonomy to clear country code setting
This test case could have ended with the station devices still in US
regulatory domain and that could make a following test case fail in some
sequences. For example, "ap_track_taxonomy ibss_5ghz" sequence made
ibss_5ghz fail to see the regdom change event since there was not one
due to the US country code already being in use at the beginning of the
test case. Fix this by clearing the country code at the end of
ap_track_taxonomy.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-09-30 23:46:17 +03:00
Jouni Malinen
09b812c952 tests: Extend gas_anqp_get to cover MBO cases with non-MBO AP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-30 22:45:03 +03:00
Jouni Malinen
5b71cb552b tests: Update server and user certificates (2015)
The previous versions expired, so need to re-sign these to fix number of
the EAP test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-09-30 22:45:03 +03:00
Jouni Malinen
a39a54517a tests: Long P2P_LISTEN and offchannel TX
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-27 00:43:27 +03:00
Jouni Malinen
7084c4d489 tests: WNM BSS Transition Management request getting rejected
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-25 17:31:26 +03:00
Jouni Malinen
62066bef69 tests: MBO and ignoring disallowed association
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-25 17:31:26 +03:00
Jouni Malinen
f75a0c0c0c tests: Fix a typo in a debug message (mbo_assoc_disallow)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-25 17:31:26 +03:00
Jouni Malinen
80b84fb2d2 tests: Update MBO test cases for non_pref_chan changes
The reason_detail field was removed from the implementation, so the test
cases need matching changes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-25 17:31:26 +03:00
Mikael Kanstrup
7137c7daee tests: Add testcase for reconnect failure due to auth timeout
Add testcase to verify a failed reconnect attempt due to authentication
timeout blacklists the correct AP. Driver capabilities are forced to
non-SME and driver roaming (BSS selection) mode.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-09-23 17:36:55 +03:00
Mikael Kanstrup
d258c70f96 tests: Add testcase for (reassoc) roam failure due to auth timeout
Add testcase to verify failed roaming attempt due to authentication
timeout blacklists the correct AP. Roaming attempt is performed
with the reassociate command and bssid_set=1. Driver capabilities
are forced to non-SME and driver roaming (BSS selection) mode.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-09-23 17:36:55 +03:00
Jouni Malinen
1c82fbf271 tests: Make pmksa_cache_{,opportunistic_}multiple_sta more robust
Clear wpa_supplicant scan cache before starting these test cases since
the ROAM command depends on the correct BSS entry being found.
scan_for_bss() does not enforce that correct entry to be present if
there was an earlier BSS entry with the same BSSID.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-23 17:36:14 +03:00
Jouni Malinen
78a37200f8 tests: Reset wlan5 device before RELOG command
This moves the wpa_supplicant debug entries from the end of a test case
using a dynamically added wlan5 interface to the correct test case,
i.e., the test case that added the interface instead of whatever test
case happens to follow this.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-23 16:03:59 +03:00
Jouni Malinen
50bb5c8627 tests: WPA-PSK AP and only rsn_pairwise set
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-23 11:45:55 +03:00
Ilan Peer
7487ef144e tests: Skip wpas_ap_dfs when MCC > 1
Skip wpas_ap_dfs in case that multi-channel is used, as
DFS operation is not supported in such a case.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-09-22 23:46:27 +03:00
Jouni Malinen
5c30a84b91 tests: mode=mesh in STATUS
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-22 23:20:48 +03:00
Jouni Malinen
425cb95337 tests: AP tracking STA taxonomy
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-22 00:45:24 +03:00
Jonathan Afek
44a4c52c86 tests: Setup wlantest once for qosmap tests
Some tests call the check_qos_map() function more than once. Make sure
each test sets up wlantest only once before the first time the function
is called.

The wlantest setup sets the channel for the wlantest interface and
executes the wlantest executable. It is more efficient to do that only
once for each test.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-09-17 22:14:06 +03:00
Jonathan Afek
c7ca843d05 tests: Increase timeout for remote tests
Some operations take longer time on real hardware than on hwsim. This
commit increases two timeouts so that the tests will pass on real
hardware, too.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-09-17 22:12:35 +03:00
Jonathan Afek
67a0d4f94e tests: Increase connection timeouts for remote tests
Use increased timeouts for connect and disconnect since these operations
take a longer time on real harware than they do on hwsim.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-09-17 22:09:36 +03:00
Jouni Malinen
4ef3325fb6 tests: Dynamic Interworking element update
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-08 19:48:44 +03:00
Jouni Malinen
30ee6cc436 tests: FTM capability indication
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-05 21:43:36 +03:00
Jouni Malinen
ff22993594 tests: VHT with 80 MHz channel width and use_sta_nsts=1
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-05 21:16:40 +03:00
Jouni Malinen
cb320a6d2d tests: Allow regdb missing some op classes in mbo_supp_oper_classes
Not all installed regdb files include channels for global operating
classes 121-123, and 129.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-22 19:22:01 +03:00
Jouni Malinen
d952f02136 tests: Make FST kill_pid() more robust
It looks like the attempt to read the process id from a PID file can
return empty data. This resulted in kill_pid() failing to kill the
process and all the following FST test cases using the extra interface
failing. While the PID file is really supposed to have a valid PID value
when we get this far, it is better to try multiple times to avoid
failing large number of test cases.

The current os_daemonize() implementation ends up calling daemon() first
and then writing the PID file from the remaining process that is running
in the background. This leaves a short race condition where an external
process that started hostapd/wpa_supplicant could end up trying to read
the PID file before it has been written.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-22 17:44:05 +03:00
Jouni Malinen
7509b550f6 tests: hostapd and ctrl_iface commands when BSS not yet fully enabled
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-22 17:44:05 +03:00
Jouni Malinen
548d280162 tests: IAPP and multiple BSSes
This verifies IAPP socket registration from multiple hostapd interfaces.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-18 20:07:17 +03:00
Jouni Malinen
6b6286eb78 tests: hostapd and MIB ctrl_iface command with open network
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-18 10:42:56 +03:00
Jouni Malinen
26820b4fc1 tests: IEEE 802.1X + WEP reauthentication
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-17 13:40:40 +03:00
Jouni Malinen
e5d3e13a5c tests: Fix ap_wps_er_http_proto max concurrent requests case
Commit 2d6a526ac3 ('tests: Make
ap_wps_er_http_proto more robust') tried to work around the timeouts
here, but that was not really the best approach since the one second
timeout that was used here for connect() ended up being very close to
the limit even before the kernel change. The longer connect() time is
caused by a sequence where the listen() backlog ignores the connection
instead of accept() followed by close() within the wpa_supplicant ER
HTTP connection handling. The time to retransmit the SYN changed a bit
in the kernel from 1.0 sec to about 1.03 sec. This was enough to push
that over the one second timeout.

Fix this by using a sufficiently long timeout (10 sec) to allow SYN
retransmission to occur to recover from the listen() backlog case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-17 13:37:25 +03:00
Jouni Malinen
50348c5c32 tests: More coverage for IBSS RSN OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-08-14 00:22:50 +03:00
Jouni Malinen
a412157262 tests: IBSS RSN group rekeying
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-08-13 16:29:07 +03:00
Jouni Malinen
2d6a526ac3 tests: Make ap_wps_er_http_proto more robust
It looks like connect() for a TCP socket can time out at least with a
recent kernel. Handle that case more gracefully by ignoring that socket
while allowing the test to continue.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-11 15:58:13 +03:00
Jouni Malinen
f27b9277d5 tests: Make FST config tests more robust and easier to debug
It looks like it is possible for the separate started wpa_supplicant
process to remain running after a test case like fst_sta_config_default.
This would result in failures to run any following test case that uses
the wlan5 interface. Try to kill the process more thoroughly by waiting
for the PID file to show up and write more details into the logs to make
it easier to debug issues in this area.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-10 17:55:20 +03:00
Jouni Malinen
96485214f7 tests: HT/VHT values in STATUS
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-02 17:43:38 +03:00
Jouni Malinen
1b8ef4061c tests: WEP with HT/VHT
Verify that HT/VHT gets disabled in WEP configuration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-02 17:43:26 +03:00
Jouni Malinen
ce4af56322 tests: DRIVER_FLAGS command
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-23 20:51:55 +03:00
Jouni Malinen
d9ed0ce65e tests: WPA2-PSK AP with station using SA Query local failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-18 00:58:27 +03:00
Jouni Malinen
e0a9370b3f tests: Overlapping BSS scan request (HT40+)
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-18 00:14:34 +03:00
Jouni Malinen
dcbb5d808b tests: FT OOM in SME
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-18 00:14:14 +03:00
Jouni Malinen
674af173fe tests: AP with open mode and driver operations failing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 23:49:44 +03:00
Jouni Malinen
28be769bc3 tests: SAE and invalid anti-clogging token request
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 17:53:25 +03:00
Jouni Malinen
dcd54211c4 tests: IEEE 802.1X connection using dynamic WEP104 when WPA enabled
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 17:34:16 +03:00
Jouni Malinen
d1150e5666 tests: IEEE 802.1X connection with LEAP included in configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 17:34:16 +03:00
Jouni Malinen
2fd44db70e tests: More SAE OOM coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 17:34:16 +03:00
Jouni Malinen
19f2a3f357 tests: Hotspot 2.0 OSU provider and OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 11:08:02 +03:00
Jouni Malinen
f281f508b7 tests: Hotspot 2.0 OSU provider and invalid directory
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 11:08:02 +03:00
Jouni Malinen
502f0ce848 tests: More GET_HS20_ICON coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 11:08:02 +03:00
Jouni Malinen
6fc562a406 tests: Unexpected Hotspot 2.0 AP configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-15 13:30:57 +03:00
Jouni Malinen
78d2233f01 tests: Fix ap_wpa2_eap_too_many_roundtrips with OpenSSL 1.1.0
Use a smaller fragment_size to force the roundtrip limit to be reached
with OpenSSL 1.1.0 which seemed to result in a bit shorter TLS messages
being used and being able to complete the authentication successfully
with the previously used fragment_size value.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-15 13:30:57 +03:00
Jouni Malinen
ec9812e7e7 tests: Hotspot 2.0 OSU provider and protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-15 13:30:57 +03:00
Jouni Malinen
2752537926 tests: Hotspot 2.0 OSU provider and no icon found
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-12 20:58:20 +03:00
Jouni Malinen
424e344fbf tests: Hotspot 2.0 connection and deauthentication request without PMF
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-12 20:49:02 +03:00
Jouni Malinen
21d410ca82 tests: GAS/ANQP and Hotspot 2.0 element protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-12 00:14:42 +03:00
Jouni Malinen
5dec77ee00 tests: GAS/ANQP and icon binary protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-12 00:05:35 +03:00
Jouni Malinen
3e5f781800 tests: Extend GAS error case coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-11 21:56:56 +03:00
Jouni Malinen
1c39f984fd tests: Hotspot 2.0 icon fetch OOM with REQ_HS20_ICON
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-11 21:56:56 +03:00
Jouni Malinen
8e590f02bd tests: Hotspot 2.0 and connect attempt without matching cred
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-04 18:54:26 +03:00
Jouni Malinen
6b16e073d3 tests: ANQP no sharing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-04 18:50:59 +03:00
Jouni Malinen
c342bb7a3d tests: Hotspot 2.0 and select with multiple matching home credentials
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-04 18:43:30 +03:00
Jouni Malinen
c63f2eb973 tests: Hotspot 2.0 connection with TTLS/default
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-04 18:24:23 +03:00
Jouni Malinen
26e43f01ae tests: Hotspot 2.0 and connect attempt without RSN
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-04 18:24:23 +03:00
Jouni Malinen
99cbec7ea7 tests: Hotspot 2.0 and connect attempt without credential
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-04 18:03:28 +03:00
Jouni Malinen
863a6bf6ae tests: Hotspot 2.0 connection and invalid roaming consortium element
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-04 18:00:23 +03:00
Jouni Malinen
63929c763a tests: Hotspot 2.0 connection and 3GPP credential constraints
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-04 17:49:57 +03:00
Jouni Malinen
604f559ae4 tests: Hotspot 2.0 and failures during profile configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-04 17:49:57 +03:00
Jouni Malinen
af52992a37 tests: Hotspot 2.0 connection and no full match
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-04 17:49:57 +03:00
Jouni Malinen
a7fa20e047 tests: Hotspot 2.0 connection and roaming consortium constraints
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-04 17:49:57 +03:00
Jouni Malinen
416556d06b tests: Hotspot 2.0 network selection with req_conn_capab (not present)
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-04 17:49:56 +03:00
Jouni Malinen
73ece491c1 tests: D-Bus GetAll wpa_config_get_all() OOM
This is a regression test for a crash on wpa_config_get_all() error
path.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-04 17:49:56 +03:00
Jouni Malinen
c8fa30f213 tests: Hotspot 2.0 OSU provider and no AP with info
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
3429e2ff36 tests: GAS/ANQP query OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
60547477e0 tests: ANQP_GET to unknown BSS
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
69e85c7fb3 tests: GAS_REQUEST OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
1ea75c7ce0 tests: Hotspot 2.0 network selection and invalid GAS response
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
1169516b62 tests: Hotspot 2.0 and maximum BSS load (roaming)
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
a0061cf48f tests: Hotspot 2.0 network selection with min bandwidth - special cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
43e337f70c tests: Hotspot 2.0 required roaming consortium and no match
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
d717c10233 tests: Hotspot 2.0 connection and invalid roaming consortium ANQP-element
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
26597515d5 tests: Hotspot 2.0 with simulated SIM and EAP-SIM - OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
c8ae9daf2b tests: Fix interworking_select() bssid argument in some test cases
The bssid argument was missing from couple of test cases. While this is
clearly incorrect, it looks like the error did not really cause any
significant issues to the test case. Anyway, better provide the correct
set of arguments to the call.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
0e67d81fb6 tests: Hotspot 2.0 with simulated SIM and EAP-SIM - invalid IMSI
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
bc6e32880f tests: Remove extra semicolons from python scripts
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
208ebb9d1a tests: Hotspot 2.0 network selection and OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
28642616bf tests: Hotspot 2.0 network selection and no roaming consortium
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00