Commit graph

16819 commits

Author SHA1 Message Date
Muna Sinada
d51b1b7a66 Move hostapd_eid_wb_chsw_wrapper() to non-VHT-specific file
Move hostapd_eid_wb_chsw_wrapper() from VHT specific ieee802_11_vht.c to
ieee802_11.c since this can be used for both HE and VHT. This commit
does not change any functionality to enable the HE use case, i.e., the
function is just moved as-is.

Signed-off-by: Muna Sinada <msinada@codeaurora.org>
2020-06-11 00:53:26 +03:00
Rajkumar Manoharan
1f72bbbefb AP: Reject association request upon invalid HE capabilities
Operation in the 6 GHz band mandates valid HE capabilities element in
station negotiation. Reject association request upon receiving invalid
or missing HE elements.

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
2020-06-10 21:34:38 +03:00
Rajkumar Manoharan
088bef1786 AP: Restrict Vendor VHT to 2.4 GHz only
Vendor VHT IE is used only on the 2.4 GHz band. Restrict the use of
vendor VHT element to 2.4 GHz. This will ensure that invalid/wrong user
configuration will not impact beacon data in other than the 2.4 GHz
band.

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
2020-06-10 21:30:50 +03:00
Rajkumar Manoharan
6a34bd3007 HE: Use device HE capability instead of HT/VHT for 6 GHz IEs
Previously, 6 GHz Band Capability element was derived from HT and VHT
capabilities of the device. Removes such unnecessary dependency by
relying directly on the HE capability.

In addition, clean up the struct ieee80211_he_6ghz_band_cap definition
to use a 16-bit little endian field instead of two 8-bit fields to match
the definition in P802.11ax.

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
2020-06-10 21:23:24 +03:00
Rajkumar Manoharan
9272ebae83 nl80211: Fetch HE 6 GHz capability from the driver
Read mode specific HE 6 GHz capability from phy info. This is needed
for futher user config validation and IE construction.

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
2020-06-10 21:14:56 +03:00
Jouni Malinen
f25c51a9f4 Sync with mac80211-next.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2020-05-31.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-06-10 21:12:44 +03:00
Brian Norris
1ce2a4fbea tests: Add all-blacklist test
Signed-off-by: Brian Norris <briannorris@chromium.org>
2020-06-10 21:12:44 +03:00
Brian Norris
ddd821365a tests: Skip malformed SAE authentication frames
The parsed 'length' field might pointsbeyond the end of the frame, for
some malformed frames. I haven't figured the source of said packets (I'm
using kernel 4.14.177, FWIW), but we can at least be safer about our
handling of them here.

Signed-off-by: Brian Norris <briannorris@chromium.org>
2020-06-10 21:12:44 +03:00
Johannes Berg
2f9e2f9044 tests: Check for mac80211_hwsim module before loading it
Instead of checking if the kernel allows modules (via the presence of
/proc/modules), check if mac80211_hwsim is already there and load it
only if not. This gets rid of some ugly prints from modprobe in case
code isn't even a module and cannot be found, etc.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-10 21:12:44 +03:00
Johannes Berg
4dd712bd36 tests: Use bytes in a few places
With python3 bytes are returned for stdout, so need to use b''
strings instead of normal strings. These are just a few places
I ran into, almost certainly more places need it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-10 21:12:44 +03:00
Johannes Berg
db294952bb tests: Set VHT160 or VHT160-80PLUS80 capability
If we want the test to actually use 160/80+80 we need to explicitly
advertise that we support it ourselves, since the kernel is going to be
a bit more strict about this.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-10 21:12:44 +03:00
Jouni Malinen
518be614f1 SAE-PK: Advertise RSNXE capability bit in STA mode
Set the SAE-PK capability bit in RSNXE when sending out (Re)Association
Request frame for a network profile that allows use of SAE-PK.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-10 12:47:07 +03:00
Jouni Malinen
de36f6b7b3 tests: SAE-PK with group 21
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-10 12:47:07 +03:00
Jouni Malinen
a77d6d2203 SAE-PK: Update SAE confirm IE design
Move the FILS Public Key element and the FILS Key Confirmation element
to be separate IEs instead of being encapsulated within the SAE-PK
element. This is also removing the unnecessary length field for the
fixed-length EncryptedModifier.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-10 12:47:07 +03:00
Jouni Malinen
f0704e7273 tests: Clean up SAE-PK parameter use
Use the global variables instead of copies of same values.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-10 12:47:07 +03:00
Jouni Malinen
cad9ae1dc4 tests: SAE-PK with different SAE group combinations
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-10 12:47:07 +03:00
Jouni Malinen
363dbf1ece SAE-PK: Remove requirement of SAE group matching SAE-PK (K_AP) group
This was clarified in the draft specification to not be a mandatory
requirement for the AP and STA to enforce, i.e., matching security level
is a recommendation for AP configuration rather than a protocol
requirement.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-10 12:46:49 +03:00
Jouni Malinen
2e80aeae4a WPS UPnP: Support build on OS X
Define MAC address fetching for OS X (by reusing the existing FreeBSD
implementation) to allow full compile testing of the WPS implementation
on a more BSD-like platform.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-09 12:48:13 +03:00
Jouni Malinen
f119f8a04a WPS UPnP: Fix FreeBSD build
struct ifreq does not include the ifr_netmask alternative on FreeBSD, so
replace that more specific name with ifr_addr that works with both Linux
and FreeBSD.

Fixes: 5b78c8f961 ("WPS UPnP: Do not allow event subscriptions with URLs to other networks")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-09 12:43:53 +03:00
Jouni Malinen
892ac42bdc tests: wpa_supplicant global pmf parameter
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-09 00:59:26 +03:00
Jouni Malinen
cc2d03601b HS 2.0: Use global pmf=2 for the created network block
Previously, PMF support was enabled in optional mode (ieee80211w=1) for
Hotspot 2.0 network blocks automatically. This did not consider the
global PMF parameter and unconditionally changed that value to optional.
Since the newly added network block had an explicit ieee80211w
parameter, this overrode the global parameter. To make this less
surprising, use the global pmf parameter value to select whether to add
network blocks for Hotspot 2.0 with PMF being optionally enabled (pmf=0
or pmf=1) or required (pmf=2).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-09 00:55:13 +03:00
Subrat Dash
790026c3da Allow TX queue parameters to be configured for wpa_supplicant AP/P2P GO
Allow user to configure the TX queue parameters through the
wpa_supplicant configuration file similarly to the way these can be set
in hostapd.

Parse the tx_queue_* parameters in the wpa_supplicant configuration file
and update the TX queue configuration to the AP/P2P GO interface in the
function wpa_supplicant_create_ap().

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-09 00:29:42 +03:00
Jouni Malinen
c7cb42d531 Remove unused enum values
The last user of these was removed in commit 17fbb751e1 ("Remove user
space client MLME") and there is no need to maintain these unused values
anymore.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-09 00:21:06 +03:00
Subrat Dash
411e42673f Move local TX queue parameter parser into a common file
This allows the same implementation to be used for wpa_supplicant as
well.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-09 00:17:39 +03:00
Jouni Malinen
78c1cb8868 tests: OWE transition mode BSSID mismatches
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-08 21:43:41 +03:00
Jouni Malinen
fcef598ea2 Do not try to connect with zero-length SSID
It was possible to find a BSS to local network profile match for a BSS
entry that has no known SSID when going through some of the SSID
wildcard cases. At leas the OWE transition mode case without BSSID match
could result in hitting this. Zero-length SSID (i.e., wildcard SSID) is
not valid in (Re)Association Request frame, so such an association will
fail. Skip such a BSS to avoid known-to-be-failing association attempts.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-08 21:40:56 +03:00
Jouni Malinen
9a0807ce36 tests: sigma_dut controlled AP using SAE-PK misbehavior
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-08 20:00:14 +03:00
Jouni Malinen
5a8b366233 tests: Make SAE-PK test cases more robust
Clear scan results explicitly in test cases that check BSS entry flags
to avoid incorrect failures based on results from earlier test cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-08 17:48:57 +03:00
Jouni Malinen
85aac526af WPS UPnP: Handle HTTP initiation failures for events more properly
While it is appropriate to try to retransmit the event to another
callback URL on a failure to initiate the HTTP client connection, there
is no point in trying the exact same operation multiple times in a row.
Replve the event_retry() calls with event_addr_failure() for these cases
to avoid busy loops trying to repeat the same failing operation.

These potential busy loops would go through eloop callbacks, so the
process is not completely stuck on handling them, but unnecessary CPU
would be used to process the continues retries that will keep failing
for the same reason.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-08 17:14:45 +03:00
Jouni Malinen
f7d268864a WPS UPnP: Fix event message generation using a long URL path
More than about 700 character URL ended up overflowing the wpabuf used
for building the event notification and this resulted in the wpabuf
buffer overflow checks terminating the hostapd process. Fix this by
allocating the buffer to be large enough to contain the full URL path.
However, since that around 700 character limit has been the practical
limit for more than ten years, start explicitly enforcing that as the
limit or the callback URLs since any longer ones had not worked before
and there is no need to enable them now either.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-08 17:12:20 +03:00
Jouni Malinen
5b78c8f961 WPS UPnP: Do not allow event subscriptions with URLs to other networks
The UPnP Device Architecture 2.0 specification errata ("UDA errata
16-04-2020.docx") addresses a problem with notifications being allowed
to go out to other domains by disallowing such cases. Do such filtering
for the notification callback URLs to avoid undesired connections to
external networks based on subscriptions that any device in the local
network could request when WPS support for external registrars is
enabled (the upnp_iface parameter in hostapd configuration).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-08 17:12:20 +03:00
Jouni Malinen
e30dcda3b1 SAE-PK: Fix FILS Public Key element Key Type for ECDSA
Use value 2 to point to RFC 5480 which describes the explicit
indicatiotion of the public key being in compressed form.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-08 17:11:06 +03:00
Jouni Malinen
4c3fbb2346 SAE-PK: Check minimum password length more accurate
Get the Sec value from the password to check the minimum length based on
the used Sec.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-08 17:11:06 +03:00
Jouni Malinen
43a191b890 tests: Remove too short SAE-PK passwords
This is in preparation of implementation changes to check SAE-PK
password length more accurately based on the Sec value.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-08 17:11:06 +03:00
Jouni Malinen
232705e3c4 tests: SAE-PK AP misbehavior
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-08 15:21:18 +03:00
Jouni Malinen
4ff0df39eb SAE-PK: Testing functionality to allow behavior overrides
The new sae_commit_status and sae_pk_omit configuration parameters and
an extra key at the end of sae_password pk argument can be used to
override SAE-PK behavior for testing purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-08 15:21:18 +03:00
Jouni Malinen
3a6e674adf tests: sigma_dut controlled AP and transition disabled indication change
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-07 17:07:57 +03:00
Jouni Malinen
0c4ffce464 Allow transition_disable updates during the lifetime of a BSS
This is mainly for testing purposes to allow more convenient checking of
station behavior when a transition mode is disabled.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-07 17:06:52 +03:00
Jouni Malinen
6d72833236 tests: SAE-PK mixed deployment
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-07 16:50:09 +03:00
Jouni Malinen
5f48d36b4a SAE-PK: Select SAE-PK network over SAE without PK
If there is an acceptable BSS with SAE-PK enabled in the same ESS,
select that over a BSS that does not enable SAE-PK when the network
profile uses automatic SAE-PK selection.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-07 16:49:07 +03:00
Jouni Malinen
d654ca24de Clean up wpa_scan_res_match()
Move the BSS-against-SSID matching into a separate helper function to
make this overly long function a bit more readable and to allow that
helper function to be used for other purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-07 16:30:32 +03:00
Jouni Malinen
0f2d5867e3 tests: SAE-PK password, but no PK on AP
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-07 12:04:14 +03:00
Jouni Malinen
f179475bf7 tests: Share a single definition of SAE-PK Sec=2 values
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-07 12:01:52 +03:00
Jouni Malinen
5ee94a997e tests: Replace sae_pk_only with sae_pk to match implementation
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-07 11:55:16 +03:00
Jouni Malinen
9ad010c290 SAE-PK: Allow automatic SAE-PK to be disabled
This replaces the previously used sae_pk_only configuration parameter
with a more generic sae_pk that can be used to specify how SAE-PK is
negotiated. The default behavior (sae_pk=0) is to automatically
negotiate SAE-PK whenever the AP supports it and the password is in
appropriate format. sae_pk=1 allows only SAE-PK to be used and sae_pk=2
disables SAE-PK completely.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-07 11:55:16 +03:00
Purushottam Kushwaha
85ca13ebcf wpa_cli: Add all_bss command to print all scan results (BSS entries)
The wpa_supplicant control interface returns maximum of 4 kB of response
data and, thus, limits maximum number of scan entries as part of
SCAN_RESULTS to approximately 60. Add a new all_bss command to use a
more robust iteration of the BSS table entries with the BSS command to
to get all scan entries and print them in the same format as the
scan_results command.

Signed-off-by: Purushottam Kushwaha <pkushwah@codeaurora.org>
2020-06-06 17:07:24 +03:00
Jouni Malinen
f38146e559 tests: PMKSA cache control interface for external management (FT)
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-06 16:48:57 +03:00
Jouni Malinen
215b4d8a72 FT: Do not add PMKID to the driver for FT-EAP if caching is disabled
wpa_supplicant disables PMKSA caching with FT-EAP by default due to
known interoperability issues with APs. This is allowed only if the
network profile is explicitly enabling caching with
ft_eap_pmksa_caching=1. However, the PMKID for such PMKSA cache entries
was still being configured to the driver and it was possible for the
driver to build an RSNE with the PMKID for SME-in-driver cases. This
could result in hitting the interop issue with some APs.

Fix this by skipping PMKID configuration to the driver fot FT-EAP AKM if
ft_eap_pmksa_caching=1 is not used in the network profile so that the
driver and wpa_supplicant behavior are in sync for this.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-06 16:48:57 +03:00
Min Liu
5cf91afeeb QCA vendor attribute for dynamic bandwidth adjustment
Define QCA vendor attribute in SET(GET)_WIFI_CONFIGURATION to
dynamically configure capabilities for dynamic bandwidth adjustment.

Signed-off-by: Min Liu <minliu@codeaurora.org>
2020-06-06 15:18:13 +03:00
Min Liu
1a28589b28 QCA vendor attributes for setting channel width
Define QCA vendor attribute in SET(GET)_WIFI_CONFIGURATION to
dynamically configure capabilities for channel width.

Signed-off-by: Min Liu <minliu@codeaurora.org>
2020-06-06 15:18:13 +03:00