Commit graph

5327 commits

Author SHA1 Message Date
Jouni Malinen
4896ddaea1 tests: Check for exceptions during TEST-START/STOP
It looks like the NOTE commands can time out in some cases. Avoid
stopping the test run in such a case to get more coverage if this is a
temporary issue.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-24 19:41:08 +03:00
Jouni Malinen
76d320ef3f tests: Update concurrent P2P setup to match start.sh changes
The design for launching AP mode interfaces was changed, but
start-p2p-concurrent.sh was not updated with matching changes.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-24 19:01:32 +03:00
Jouni Malinen
86bd141050 Change WEP network selection to reject WPA/WPA2 APs
Previously, wpa_supplicant behavior in WEP configuration was to try to
mimic a device that is not aware of WPA/WPA2 and as such, it tried to
connect to a WPA/WPA2 AP with the assumption that the AP could be
providing support for both WEP and WPA/WPA2 stations in the same BSS.
Such APs could have been used during transition from WEP to more secure
options, but that type of deployment have not been used in large number
and are not really of much use anymore taken into account that more or
less all new devices support WPA/WPA2. That combined with the preference
to deprecate WEP justifies removing this use case and making WEP
networking matching more strict by using the knowledge of AP advertising
WPA/WPA2 as an indication of WEP not being supported.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 19:27:25 +03:00
Jouni Malinen
2e145e91e7 WPS: Fix failure path to allow WSC_NACK and EAP-Failure to be exchanged
Commit c7a67a7719 forced disconnection
when wpas_clear_wps() is called. Call this function from a registered
timeout when processing a failure event in order to allow the WPS
handshake to be completed with WSC_NACK and EAP-Failure.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 17:49:01 +03:00
Jeffin Mammen
3351a3847c WPS: Add control interface command for fetching latest status
The new wps_get_status command can be used to fetch the result of the
latest WPS operation and the current PBC state from hostapd.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 17:49:01 +03:00
Jeffin Mammen
e96872a4f2 WPS: Track peer MAC address from the last operations
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 17:48:59 +03:00
Jeffin Mammen
ae23935e7d WPS: Track PBC status
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 17:48:25 +03:00
Jeffin Mammen
61b6520e16 WPS: Track result of the latest WPS operation
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 17:48:20 +03:00
Jeffin Mammen
50396e29da WPS: Add PBC mode activated/disabled events
This makes it easier to track PBC state on the registrar.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 16:52:48 +03:00
Jouni Malinen
961750c1e8 WPS: Share a common function for error strings
This makes it easier to maintain the list of WPS_EI_* error values and
matching strings.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 16:32:34 +03:00
Sunil Dutt
30158a0d80 nl80211: Update the assoc_freq during connect
drv->assoc_freq was not updated during the connect command (neither
during the command's invocation nor after getting the event) unlike with
auth/assoc case where assoc_freq is updated. This resulted in
nl80211_get_link_noise() (and any other function for that matter) using
the improper drv->assoc_freq value with drivers that use the connect
API. Fix this by updating drv->assoc_freq on connect command and when
fetching the frequency from the driver.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 15:41:05 +03:00
Jouni Malinen
83e7bb0e5d nl80211: Add more debug prints for DEL_STATION commands
This makes the debug log clearer on AP mode STA operations.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 12:03:28 +03:00
Jouni Malinen
d2ba3d6bd9 VLAN: Simplify no-WEP with VLAN check
No need to have a local variable and two #ifndef blocks for this.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-07 12:24:18 +03:00
Michael Braun
d66dcb0d0b WEP: Remove VLAN support from hostapd
This removes WEP with VLAN support and thus avoids increasing
complexity for tagged VLANs.

Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2013-08-07 12:22:38 +03:00
Rui Paulo
646f12ad4c bsd: Add a commit routine
Signed-hostap: Rui Paulo <rpaulo@FreeBSD.org>
2013-08-07 11:03:44 +03:00
Rui Paulo
32dc6a319e bsd: Mark define sta_set_flags() only for hostapd
Signed-hostap: Rui Paulo <rpaulo@FreeBSD.org>
2013-08-07 11:02:55 +03:00
Rui Paulo
70a867c268 bsd: Mark the interface down before opening the routing socket
Signed-hostap: Rui Paulo <rpaulo@FreeBSD.org>
2013-08-07 11:01:12 +03:00
Rui Paulo
89f4690005 bsd: Compute the RSSI level
Signed-hostap: Rui Paulo <rpaulo@FreeBSD.org>
2013-08-07 10:57:51 +03:00
Rui Paulo
5dd82c634c bsd: Set IEEE80211_KEY_NOREPLAY in IBSS/AHDEMO mode
Signed-hostap: Rui Paulo <rpaulo@FreeBSD.org>
2013-08-07 10:57:10 +03:00
Rui Paulo
cb76af8a35 bsd: Skip SIOCSIFFFLAGS ioctl when there is no change.
Don't issue SIOCSIFFLAGS if the interface is already up or already down.

Signed-hostap: Rui Paulo <rpaulo@FreeBSD.org>
2013-08-07 10:54:16 +03:00
Sameer Thalappil
7239ea7f01 nl80211: Add stop AP mode event API
Stop AP command can be used by the driver as an event to indicate that
AP mode has stopped operation. WLAN driver may have encountered errors
that has forced the driver to report this event or concurrent operations
on virtual interfaces may have forced AP operation to be stopped. When
in P2P GO mode, wpa_supplicant uses this event to remove P2P group to
keep in sync with the driver state.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-06 23:28:40 +03:00
Michael Braun
c2db79f237 VLAN: Remove vlan_tail
Everything in hostapd can be implemented efficiently without vlan_tail.

Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2013-08-04 21:45:50 +03:00
Jouni Malinen
85a6cdb571 Revert "P2P: Reject p2p_find while P2P connection is in progress"
This reverts commit ce970851af.

It turned out that this breaks lots of use cases where p2p_find is
issued while already in p2p_listen state. As such, we cannot reject
p2p_find this easily without checking for more specific cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-01 17:03:06 +03:00
Deepthi Gowri
ce970851af P2P: Reject p2p_find while P2P connection is in progress
Though p2p_find is not expected during ongoing P2P connection, it is
possible that any third party application issues a p2p_find resulting in
connection failure. Address this by rejecting any p2p_find command while
connection is in progress.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-01 15:39:47 +03:00
Sunil Dutt
f7b4ef2208 TDLS: Handle transmission failures of TPK Handshake messages
A transmission failure of the TDLS Setup Request frame (TPK Handshake
M1) results in no further retries and the peer entry being left in state
where all TDLS Setup Request frames from the peer with higher address
would be rejected, thus always resulting in a failure to establish a
TDLS link. Handle the failures in transmission by disabling the link
immediately to ensure the traffic to the peer goes through the AP. This
commit also handles similar transmision failures for TPK Handshake M2
and M3 frames (TDLS Setup Response and Confirm).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-01 10:47:23 +03:00
Wei-Jen Lin
a2ea8d64d1 P2P: Fix invalid remain-on-channel duration for frame TX
cfg80211 does not allow the zero duration of remain-on-channel. Instead,
use 20 ms as default waiting time when remain-on-channel is used to
schedule offchannel transmission that does not expect a response.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-31 23:22:04 +03:00
Sean Lin
cbf41ca796 P2P: Do not delay retries on failure during group formation
4-way handshake may fail under extremely noisy environment and if this
happens during P2P group formation, the 10 second extra delay added in
wpas_auth_failed() can result in running over the 15 second timeout.

Avoid this by skipping the delay mechanism in wpas_auth_failed() for the
P2P group formation case. The P2P formation timeout will take care of
stopping the attempts if the failure condition does not get resolved.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-31 23:09:34 +03:00
Jouni Malinen
dc01de8a0e nl80211: Fix TDLS key configuration to not set TX key index
The nl80211 command for setting the TX index does not distinguish TDLS
vs. AP key and as such, the driver would not know what this set TX key
index operation is doing in the TDLS case. This could result in the TX
key index for AP being changed instead if static WEP is used in the AP
connection. Fix the issue by not setting TX key index when configuring a
TDLS key.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-31 18:34:16 +03:00
Jouni Malinen
9d86f37f78 tests: Validate AP connection in each TDLS step
Make sure the connection between each STA and the AP is in working state
between each TDLS setup/teardown operation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-31 13:38:34 +03:00
Jouni Malinen
ec9589fdac tests: Pass apdev instead of bssid to TDLS functions
This makes it easier to add new validation steps into TDLS setup and
teardown processes.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-31 13:27:41 +03:00
Ilan Peer
932659696e nl80211: Remove unused WPA_DRIVER_FLAGS_MULTI_CHANNEL_CONCURRENT
This is not used anymore after the previous commits that changed the
driver interface to use number of supported concurrent channels instead
of this flag.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-07-21 20:52:09 +03:00
Ilan Peer
0d08efa447 P2P: Use the number of concurrent channels in P2P flows
Change the P2P flows to use the number of concurrent channels
supported by the device and the number of currently used channels
for the P2P flows.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-07-21 20:48:09 +03:00
Jouni Malinen
a21816a933 Use wpa_drv_shared_freq() if get_radio_name() is not supported
Some driver interfaces may not support the get_radio_name() design and
get_shared_radio_freqs() needs to be aware of such possibility when
determining shared radio frequencies.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-21 20:48:09 +03:00
Ilan Peer
53c5dfc2c4 Change share_vif_oper_freq() to handle multiple freqs
There are devices that can operate several channels concurrently.
Change shared_vif_oper_freq() to get_shared_radio_freqs() that can
return an array of frequencies currently used by all the virtual
interfaces that share the same radio.

In addition, move it to wpa_supplicant.c, so it can be used by other
modules.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-07-21 20:03:53 +03:00
Ilan Peer
4752147d88 nl80211: Report the number of concurrent support channels
Previously, drivers only reported if they support multiple concurrent
channels, but did not report the maximum number of supported channels.
Add this reporting to the driver capabilities and add the implementation
to driver_nl80211.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-07-21 19:49:47 +03:00
Jouni Malinen
d7df0fa727 Clean up wpa_supplicant_event() with deauth/disassoc helper functions
wpa_supplicant_event() has grown overly large, so it is useful to split
it into smaller pieces.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-21 16:40:40 +03:00
Jouni Malinen
fdae3c40f6 tests: Add a test case for IBSS RSN
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-21 16:01:54 +03:00
Jouni Malinen
fd9f170098 Remove unnecessary nested ifdef CONFIG_AP
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-21 16:01:29 +03:00
Antonio Quartulli
13adc57b39 IBSS RSN: Add peer restart detection
To better support the IBSS/RSN mechanism, wpa_supplicant has to be able
to detect a possible peer reboot and in this case it should start a new
EAPOL handshake.

To perform such reboot detection wpa_supplicant has to perform an Open
Authentication by sending an Authentication frame and then replying to
it. IF an Authentication frame is received when the key have already
been exchanged, wpa_supplicant understands that the peer has rebooted
and can reset its state machine.

Whenever a new peer is added to the IBSS wpa_supplicant will start the
Open Authentication and only after having accomplished it will start the
key exchange. If the driver does not support Authentication frame
exchange initiated from user space, this step is skipped to maintain
previous behavior (just go through EAPOL-Key frame processing).

The Open Authentication was partly supported by the Linux kernel but now
wpa_supplicant can register for Authentication frames, handle it in
userspace and so avoid any possible race condition.

Signed-hostap: Nicolas Cavallari <cavallar@lri.fr>
Signed-hostap: Antonio Quartulli <antonio@open-mesh.com>
2013-07-21 15:56:53 +03:00
Antonio Quartulli
b21990b4bb nl80211: Register for AUTH frames when joining an IBSS network
In order to correctly handle IBSS/RSN, wpa_supplicant has to register
for any incoming Authentication frmae to properly react when those are
received.

Signed-hostap: Nicolas Cavallari <cavallar@lri.fr>
Signed-hostap: Antonio Quartulli <antonio@open-mesh.com>
2013-07-21 15:27:19 +03:00
Nicolas Cavallari
c91f796fb4 nl80211: Support not specifying the frame frequency
If the frequency is not specified the frame is now sent over
the channel used by the current BSS.

This will also log the payload of each sent CMD_FRAME.

Signed-hostap: Nicolas Cavallari <cavallar@lri.fr>
[antonio@open-mesh.com: commit message reworded]
Signed-hostap: Antonio Quartulli <antonio@open-mesh.com>
2013-07-21 15:24:50 +03:00
Jouni Malinen
ec384c566a IBSS RSN: Fix disconnect() with internal SME
Commit 1aef400bf0 implemented IBSS RSN
disconnect() call using sta_deauth() in a way that resulted in NULL
pointer dereference in driver_nl80211.c if SME was in user space. Fix
this by passing the own MAC address in the sta_deauth call.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-21 15:21:38 +03:00
Mohammed Shafi Shajakhan
ed07764699 nl80211: Remove redundant assignment of ifindex
wpa_driver_nl80211_finish_drv_init() takes care of assigning
the interface index.

Signed-hostap: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
2013-07-21 13:20:27 +03:00
Arend van Spriel
4ed8d954dd TDLS: Tear down TDLS using wpas_drv_tlds_oper() if not external
When the device indicates to take care of TDLS operations the TDLS
setup is done calling wpas_drv_tdls_oper(). This patch does a similar
thing for the teardown. This fixes failure of teardown:

"TDLS: Could not find peer <mac> for link Teardown"

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-07-20 17:52:32 +03:00
Chengyi Zhao
831770bffe Cancel delayed scheduled scan when wpa_supplicant cleans up
Because a delayed scheduled scan will access the members of struct
wpa_supplicant which is freed and this can result in a crash,
wpa_supplicant needs to cancel delayed scheduled scan during cleanups.

Signed-hostap: Chengyi Zhao <chengyix.zhao@gmail.com>
2013-07-20 17:47:02 +03:00
Sujith Manoharan
69dd2967db WDS: Fix WEP usage with nl80211 wds_sta=1
The static WEP keys have to be configured for the new VLAN
interface that is created for a 4addr WDS peer, not doing so
breaks WEP functionality in nl80211/4addr based WDS links.

Signed-hostap: Sujith Manoharan <c_manoha@qca.qualcomm.com>
2013-07-20 17:41:22 +03:00
Michal Kazior
c8ebeda406 wpa_supplicant: Add support for VHT BSS membership selector
This allows wpa_supplicant to associate to an AP that has VHT BSS
membership selector set to indicate VHT support is required for the BSS.

Without the patch it was impossible to connect to, e.g., hostapd-based
AP that has require_vht=1. wpa_supplicant was complaining with:
  hardware does not support required rate 63.0 Mbps

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-07-20 17:28:42 +03:00
Sujith Manoharan
3f9a8137f5 hostapd: Add a config option to control beaconing
In a AP/STA concurrent setup, if the STA interface is continually
scanning, trying to connect to a network, the AP interface
is basically broken since beaconing would be erratic.

This option can be used in a WDS setup where one AP acts as a
Client/AP-Repeater. The Repeater AP interface has to start beaconing
only after the Client interface has established a WDS link with the
"Root AP".

Signed-hostap: Sujith Manoharan <c_manoha@qca.qualcomm.com>
2013-07-20 17:20:43 +03:00
Michal Kazior
182b2e535c Add missing host_to_le32() for big endian hosts
Compiling hostapd with VHT enabled on a big endian machine resulted in
an undefined symbol error. Fix this by defining the missing macro.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-07-20 17:17:32 +03:00
Jithu Jance
3f53c006c7 nl80211: Ignore disconnect event in case of locally generated request
Previously, there could be two disconnection events in core
wpa_supplicant when going through a case of wpa_supplicant-requested
disconnection with a driver that implements SME internally. This could
result in undesired behavior when a disconnection is followed by a new
connection attempt before the extra event has been received (e.g.,
during fast reassoc or WPS provisioning). Avoid such issues by ignoring
locally generated disconnect events after requesting cfg80211 to
disconnect.

This makes the previously used ignore_next_local_disconnect more
consistent by setting the variable within
wpa_driver_nl80211_disconnect() so that both callers get the same
behavior.

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2013-07-20 16:06:13 +03:00