Commit graph

420 commits

Author SHA1 Message Date
Lubomir Rintel
59d59eb0e0 Revert "D-Bus: Implement Pmf property"
This reverts commit adf8f45f8a.

It is basically all wrong. The Pmf property did exist, with a signature of
"s" as documented in doc/dbus.doxygen. It was synthesized from
global_fields[].

The patch added a duplicate one, with a signature of "u", in violation
of D-Bus specification and to bemusement of tools that are careful
enough:

  $ busctl introspect fi.w1.wpa_supplicant1 /fi/w1/wpa_supplicant1/Interfaces/666
  Duplicate property

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2018-11-24 18:03:55 +02:00
Vasyl Vavrychuk
d53401c54b dbus: Redirect signal processing to the management device if present
This fixes sending of FindStopped, GroupFormationFailure, and
InvitationReceived signals in the case of separate P2P-Device interface.
This extends the coverage of the earlier commit
745d62322b ("dbus: Redirect P2P request to
the managment device if present") to these three functions that were
missing the redirection.

Some wireless controllers might have separate P2P-Device interface, see
as example result of 'iw dev':

phy#0
        Unnamed/non-netdev interface
                ...
                type P2P-device
                ...
        Interface wlp2s0
                type managed
                ...

In this case there is separate 'struct wpa_supplicant' created for this
p2p-dev-* device as result of 'wpa_supplicant_add_iface >
wpas_p2p_add_p2pdev_interface > wpa_supplicant_add_iface'.

This instance of wpa_supplicant is not registered in D-Bus
(wpas_dbus_register_*) since for corresponding P2P device interface flag
'struct wpa_interface > p2p_mgmt' is set.

But this instance is saved in p2p_init_wpa_s and is used for handling
P2P related D-Bus commands. Therefore we should look for D-Bus path in
the parent of p2p_init_wpa_s instance.

Without this change test dbus_p2p_discovery starts failing if we set
support_p2p_device in vm-run.sh.

Signed-off-by: Vasyl Vavrychuk <vvavrychuk@gmail.com>
2018-04-02 12:02:13 +03:00
Masashi Honma
e480212765 dbus: Add FILS to global capabilities
If any of the interfaces supports FILS (and similarly for FILS-SK-PFS),
include the "fils" (and "fils_sk_pfs") capability in D-Bus information.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2018-04-02 11:56:06 +03:00
Saurav Babu
e360010c3a dbus: Add mesh to global capabilities
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2018-04-01 21:52:56 +03:00
Vasyl Vavrychuk
ebf4043739 D-Bus: Report error on starting P2P find
Signed-off-by: Vasyl Vavrychuk <vvavrychuk@gmail.com>
2018-02-03 12:25:32 +02:00
Masashi Honma
6240424a76 dbus: Add FILS key mgmt values into BSS security properties
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-12-16 13:14:37 +02:00
Saurav Babu
cdf2501494 dbus: Add new interface property to get mesh group
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-09-10 01:39:37 +03:00
Saurav Babu
190f6f1176 dbus: Add new interface property to get connected mesh peers
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-09-10 01:39:37 +03:00
Saurav Babu
a9de99b1c5 dbus: Add MeshPeerDisconnected signal
This is similar to the control interface event MESH-PEER-DISCONNECTED.

Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-09-10 01:39:37 +03:00
Saurav Babu
9b0701fbf5 dbus: Add MeshPeerConnected signal
This is similar to the control interface event MESH-PEER-CONNECTED.

Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-09-10 01:39:35 +03:00
Saurav Babu
a39b040b4c dbus: Add MeshGroupRemoved signal
This is similar to the control interface event MESH-GROUP-REMOVED.

Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-09-09 14:12:33 +03:00
Saurav Babu
89e9cd25d2 dbus: Add MeshGroupStarted signal
This introduces a new interface for mesh and adds a signal that
is similar to the control interface event MESH-GROUP-STARTED.

Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-09-09 14:01:14 +03:00
Nishant Chaprana
9f49474669 dbus: Add method to disable channel switching with a TDLS peer
This patch adds "TDLSCancelChannelSwitch" dbus method on
"fi.w1.wpa_supplicant1.Interface" interface to disable channel switching
with a TDLS peer.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2017-05-07 22:08:43 +03:00
Nishant Chaprana
2a57b4b821 dbus: Add method to enable channel switching with a TDLS peer
This patch adds "TDLSChannelSwitch" dbus method on
"fi.w1.wpa_supplicant1.Interface" interface to enable channel switching
with a TDLS peer.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2017-05-07 22:08:43 +03:00
Saurav Babu
1939505419 dbus: Add AbortScan method to abort ongoing scan
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-05-07 22:08:43 +03:00
Johannes Berg
a1f11e34c4 Use os_memdup()
This leads to cleaner code overall, and also reduces the size
of the hostapd and wpa_supplicant binaries (in hwsim test build
on x86_64) by about 2.5 and 3.5KiB respectively.

The mechanical conversions all over the code were done with
the following spatch:

    @@
    expression SIZE, SRC;
    expression a;
    @@
    -a = os_malloc(SIZE);
    +a = os_memdup(SRC, SIZE);
    <...
    if (!a) {...}
    ...>
    -os_memcpy(a, SRC, SIZE);

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-07 13:19:10 +02:00
Saurav Babu
d02989f2e4 D-Bus: Notify mesh capability if driver supports it
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-02-26 12:05:40 +02:00
Saurav Babu
213eb18851 dbus: Set mode to mesh in bss properties when mesh is supported
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-02-20 22:14:19 +02:00
Jouni Malinen
117875db33 D-Bus: Add GroupMgmt entry into the interface Capabilities dict
This can be used to determine whether the driver supports PMF and if so,
with which group management cipher suites. In addition, add the missing
pairwise and group cipher suite values to the documentation while adding
this new entry there as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-14 17:41:20 +02:00
Stijn Tintel
3cdb4ac074 D-Bus: Add pmf to global capabilities
This indicates that the wpa_supplicant binary has been compiled with PMF
support.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-14 17:29:22 +02:00
Stijn Tintel
adf8f45f8a D-Bus: Implement Pmf property
The Pmf property is documented in doc/dbus.doxygen, but does not exist,
so implement it.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-14 17:28:00 +02:00
Jouni Malinen
29065686ac D-Bus: Fix BSS Mode getter for invalid DMG BSS
Previous version could have used uninitialized char* when a DMG with
invalid capabilities were added to BSS table from scan results.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-08 18:39:24 +02:00
Jouni Malinen
77fcbf7ff1 D-Bus: Use a helper function to get possibly NULL strings
This type of check is used in quite a few getter functions, so add a
helper function to take care of it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-23 21:28:43 +02:00
Avichal Agarwal
dbf524946b D-Bus: Add DeviceType in WPS property
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
2016-12-23 21:28:43 +02:00
Avichal Agarwal
266097fdad D-Bus: Add device serial number in WPS property
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2016-12-23 11:02:43 +02:00
Avichal Agarwal
3ee6a3ab35 D-Bus: Add model number in WPS property
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2016-12-23 10:59:53 +02:00
Avichal Agarwal
ae66822cd8 D-Bus: Add WPS model name as property
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Signed-off-by: Kyeong-Chae Lim <kcya.lim@samsung.com>
2016-12-23 10:59:53 +02:00
Avichal Agarwal
318d4b5beb D-Bus: Add WPS manufacturer as property
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Signed-off-by: Kyeong-Chae Lim <kcya.lim@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2016-12-23 10:59:50 +02:00
Avichal Agarwal
b20f031c68 D-Bus: Add WPS device name as property
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Signed-off-by: Kyeong-Chae Lim <kcya.lim@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2016-12-23 10:51:09 +02:00
Amit Purwar
4e118c847b D-Bus: Add 'freq' option to P2P Find method to specify starting channel
This allows user to start P2P Find/Scan on a particular frequency and
then move to scanning social channels. This support is already present
on control socket.

Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
2016-12-19 13:09:31 +02:00
Nishant Chaprana
18f1611797 D-Bus: Send P2P IP address assignment info with GroupStarted event
This commit adds IP address information into GroupStarted event on the
P2P client side like it is sent over the control interface.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2016-11-21 14:45:13 +02:00
Nishant Chaprana
046fa6fd11 D-Bus: Add getter and setter for P2P IP address config parameters
This patch adds setter and getter for P2P IP address config parameters:
1. ip_addr_go
2. ip_addr_mask
3. ip_addr_start
4. ip_addr_end

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2016-11-20 12:41:39 +02:00
Nishant Chaprana
746e5c2565 Fix spelling mistakes in number of comments
Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2016-09-30 22:45:03 +03:00
Jose Blanquicet
b44d9c760f D-Bus: Add ConfigFile parameter into the interface properties
This patch aims to expose the configuration file path as an interface
property, like is done with the driver and the bridge name. Doing so,
higher layer programs become responsible to recreate interfaces with the
correct configuration file path when programs need to remove them.

Signed-off-by: Jose Blanquicet <blanquicet@gmail.com>
2016-08-29 11:43:53 +03:00
Roshan Pius
d015bb05df Move network add/remove operations to a common function
All the 3 control interfaces: socket based, dbus & binder needs to
perform the same sequence of steps for network add/remove. So, move
these to a common utility method in |wpa_supplicant.c| instead of
duplicating the code everywhere.

Signed-off-by: Roshan Pius <rpius@google.com>
2016-08-18 20:46:18 +03:00
Roshan Pius
5f040be4ff Move disconnect command handling to a common place
Move out the disconnect command handling from |ctrl_iface.c| to
|wpa_supplicant.c| so that it can be reused across the different
control interfaces (socket, dbus & binder).

Signed-off-by: Roshan Pius <rpius@google.com>
2016-08-13 21:11:04 +03:00
Jouni Malinen
fc1e2c0d91 D-Bus: Make the CurrentAuthMode property getter more robust
Now that mesh sets wpa_s->wpa_state = WPA_COMPLETED, it looks like this
getter can get called with wpa_s->current_ssid = NULL. That could result
in NULL pointer dereference, so need to protect that specific case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-24 23:49:08 +03:00
Nishant Chaprana
82b9ec3125 D-Bus: Add DeviceFoundProperties signal for discovered peers
This signal sends the peer properties to applications for discovered
peers. The signature of this event is "oa{sv}". This event is needed
because the current DeviceFound signal provides only the peer object
path. If there are many peers in range there will be many DeviceFound
signals and for each DeviceFound signal, applications would need to use
GetAll to fetch peer properties. Doing this many times would create
extra load over application as well as over wpa_supplicant, so it is
better to send peer properties in the event so that applications can
extract found peer information without extra steps.

The existing DeviceFound signal is left as-is to avoid changing its
signature.

The issue is not applicable to the control interface because the
P2P-DEVICE-FOUND event includes peer info in it, but over D-Bus
interface DeviceFound provides only the peer object.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2016-06-24 19:02:58 +03:00
Jouni Malinen
f4b4ddfdd9 D-Bus: Remove unused wpas_dbus_signal_p2p_group_started() parameter
The ssid pointer was not used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-30 17:56:41 +03:00
Nishant Chaprana
4fe50bbc8e D-Bus: Indicate whether created group is persistent or not
This adds an extra parameter in GroupStarted signal to indicate whether
the created group is Persistent or not. It is similar to the
[PERSISTENT] tag which comes in P2P-GROUP-STARTED over the control
interface.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2016-05-30 17:56:16 +03:00
Saurav Babu
e8a1b6b8e9 D-Bus: Check driver capability for IBSS in Modes property of Capabilities
Instead of hardcoding "ad-hoc" in the array of supported capabilities,
add this only if the driver indicates support for IBSS.

Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2016-05-13 18:53:04 +03:00
Naveen Singh
c7fb678f31 D-Bus: Add association response status code property for failure cases
(Re)Association Response frame with status code other than 0 is now
notified over DBUS as a part of PropertiesChanged signal. This can be
used by application in case AP is denying association with status code
17 (band steering) so that it does not interfere in the BSSID selection
logic of wpa_supplicant.

Signed-off-by: Naveen Singh <nasingh@google.com>
2016-03-06 20:44:51 +02:00
Lior David
ba307f8528 P2P: Add a separate pointer to the P2P Device instance
In many places in the code there was a reference to wpa_s->parent to get
from group interface to p2p_dev interface. These places can break if
P2P_DEVICE interface would need to be used with the primary interface as
the group interface, since the parent of the primary interface points to
itself and not the p2p_dev interface.

Fix this by adding a separate "p2pdev" pointer to wpa_supplicant,
it will be the same as parent pointer in most cases but whenever
the primary interface is used as a group interface, change it to
point to the correct p2p_dev interface.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
2016-02-27 19:37:19 +02:00
Lubomir Rintel
df9e2c2a55 D-Bus: Don't do <deny send_interface="..." /> in dbus service file
It does more than intended; apart from denying messages to that
particular interface it also denies all messages non-qualified with an
interface globally. This blocks messages completely unrelated to
wpa_supplicant, such as NetworkManager communication with the VPN
plugins.

From the dbus-daemon manual:

  Be careful with send_interface/receive_interface, because the
  interface field in messages is optional. In particular, do NOT
  specify <deny send_interface="org.foo.Bar"/>! This will cause
  no-interface messages to be blocked for all services, which is almost
  certainly not what you intended. Always use rules of the form: <deny
  send_interface="org.foo.Bar" send_destination="org.foo.Service"/>

We can just safely remove those rules, since we're sufficiently
protected by the send_destination matches and method calls are
disallowed by default anyway.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2016-02-07 11:55:09 +02:00
John Ernberg
f91e11f465 D-Bus: Fix p2p interface capability message
If the config file for the interface says "p2p_disabled=1", don't report
p2p capabilities on this interface. This helps programs like Connman to
not enable p2p when it's been disabled in wpa_supplicant.

Signed-off-by: John Ernberg <john.ernberg@actia.se>
2016-02-05 18:09:38 +02:00
Purushottam Kushwaha
bcce934755 dbus: Restrict DeviceName size to 32 characters in setter
The maximum WPS Device Name length is 32 characters and that limit was
already enforced for the control interface and configuration files.

Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
2016-01-15 20:16:13 +02:00
Jouni Malinen
70e0cb33f2 P2P: Provide group SSID, if specified, to P2P Client join step
At least one of the wpas_p2p_connect() callers (NFC join case) already
had access to the Group SSID. Pass that information through
wpas_p2p_connect() to wpas_p2p_join() so that the join operation can
filter out incorrect groups more easily.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-30 19:08:51 +02:00
Avichal Agarwal
af041f997d dbus: Add support for vendor specific elements
The new methods are
1. VendorElemAdd "i" "ay" i=integer ay=array of bytes
2. VendorElemGet "i" i=integer (output array of bytes)
3. VendorElemRem "i" "ay" i=integer ay=array of bytes

These provide functionality similar to the control interface commands
VENDOR_ELEM_ADD, VENDOR_ELEM_GET, and VENDOR_ELEM_REMOVE.

Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
Signed-off-by: Kyeong-Chae Lim <kcya.lim@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
Signed-off-by: Dilshad Ahmad <dilshad.a@samsung.com>
[VendorElemGet to return array of bytes instead of string; cleanup]
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 12:50:13 +02:00
Ahmad Kholaif
c27f4c9006 P2P: Add support for VHT 80+80 MHz and 160 MHz
The new max_oper_chwidth and freq2 arguments to P2P_CONNECT, P2P_INVITE,
and P2P_GROUP_ADD control interface commands can be used to request
larger VHT operating channel bandwidth to be used than the previously
used maximum 80 MHz.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-25 19:01:20 +02:00
MAYANK HAARIT
442cc8cc41 dbus: Fix memory leak in sending InvitationReceived signal
Free the message after message send in
wpas_dbus_signal_p2p_invitation_received() to avoid leaking memory.

Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
2015-11-17 17:20:03 +02:00