Commit graph

273 commits

Author SHA1 Message Date
Jouni Malinen
bd6bb3e37b tests: HT 20/40 co-ex functionality during BSS lifetime
Verify that AP acts on 40 MHz intolerant STA association/disassociation
and on 20/40 co-ex report indicating 40 MHz intolerant AP showed up and
removed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-29 12:52:10 +03:00
Jouni Malinen
117caa4a0c tests: wpa_supplicant configuration file reading/writing
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-16 01:45:13 +03:00
Jouni Malinen
bdc4476476 tests: P2P group formation using parameters from persistent group
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-15 01:16:32 +03:00
Jouni Malinen
08429720a7 tests: HT capability overrides
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
5070b14a51 tests: p2p_find with progressive scan
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
543f9f7ead tests: auto_interworking=1
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
b3ec107c8b tests: BSS_EXPIRE_COUNT/AGE
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:52 +03:00
Jouni Malinen
31ec9faf47 tests: bgscan test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:52 +03:00
Jouni Malinen
f44c45ac7f tests: Verify STATUS-WPS passphrase on GO
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-07 00:56:04 +03:00
Jouni Malinen
861671b6ca tests: Use random WPS PIN
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-07 00:56:04 +03:00
Jouni Malinen
538da4f4d2 tests: TDLS setup failure due to BSSID mismatch
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-05 20:42:12 +03:00
Jouni Malinen
ca4fd18290 tests: Speed up IBSS test using single channel scan on SELECT_NETWORK
This removes unnecessary waits and adds test coverage for SELECT_NETWORK
freq parameter.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-04 23:13:49 +03:00
Jouni Malinen
aa45859eba tests: Extend wpas_ctrl_cred to cover most cred block operations
This verifies the new cred modification events and GET_CRED.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-04 22:50:46 +03:00
Jouni Malinen
145f35bf30 tests: Verify HT/VHT required rejection
Previously, only the case of STA supporting HT/VHT was tested. Now both
cases are verified.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-23 19:49:12 +02:00
Jouni Malinen
3b80894541 tests: Negative FT RRB test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-23 19:28:53 +02:00
Jouni Malinen
44bb91066b tests: wpa_supplicant MIB command
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-16 00:18:03 +02:00
Jouni Malinen
fb5c8cea95 tests: Supplicant-enforced PTK rekey
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-16 00:13:23 +02:00
Jouni Malinen
daf3806d1d tests: Protocol tests for unexpected/invalid GO Neg Resp
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-09 01:18:42 +02:00
Jouni Malinen
08e4bd8751 tests: PD-before-GO-Neg workaround
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-05 12:00:20 +02:00
Jouni Malinen
e2afdef223 tests: Verify excluded_ssid with all credential types
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:34 +02:00
Jouni Malinen
9714fbcdcc tests: HS 2.0 minimum bandwidth policy
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:33 +02:00
Jouni Malinen
a96066a5d3 tests: Verify cred vs. network block priority selection
This verifies that 'INTERWORKING_SELECT auto' is able to pick the
correct network based on priority configuration when connected to a
lower priority network.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-27 14:17:31 +02:00
Jouni Malinen
1815317906 tests: Verify req_conn_capab as cred parameter
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-27 00:49:52 +02:00
Jouni Malinen
5f1e31cfc8 tests: Add update_identifier to one of the HS 2.0 test cases
This allows debug logs to be used to verify byte order in the
PPS MO ID fields.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
19839f8efc tests: HS 2.0 maximum BSS Load constraint
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
2253ea44c2 tests: HS 2.0 roaming partner preference
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
078683ac2b tests: Verify multi-cred sp_priority use
test_ap_hs20_multi_cred_sp_prio verifies that two credentials
provisioned by a single SP are selected properly based on sp_priority
when a single BSS matches both credentials.
test_ap_hs20_multi_cred_sp_prio2 does the same when there a separate BSS
for each credential.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
d369bdcad9 tests: Clear pmf parameter on reset()
This is in preparation of removing pmf parameter reset on the FLUSH
command.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-26 01:24:22 +02:00
Jouni Malinen
12c587a517 tests: Verify domain_suffix_match in a cred block
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-25 23:40:29 +02:00
Jouni Malinen
b2210bd289 tests: Stop WPS ER on station reset
This seems to be needed in some cases to avoid issues in test cases that
assume there are no other ERs running.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-24 13:56:42 +02:00
Jouni Malinen
5be9dcbb86 tests: Remove unnecessary interpreter line from most python files
Only run-tests.py is actually executed, so there is no need to specify
the interpreter in all the helper files and test script files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 20:21:53 +02:00
Jouni Malinen
6f939e591e tests: Convert connect() to use kwargs
This makes it more convenient to add new network block parameters.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 21:58:09 +02:00
Jouni Malinen
242219c563 tests: Set dh_file on EAP client
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 10:42:56 +02:00
Jouni Malinen
e01929c668 tests: Report unexpected STATUS lines instead of stopping
It looks like get_status() has failed in some test runs because of a
STATUS command returning an line without '=' on it. Instead of stopping
there on exception, report the unexpected line in the log and ignore it
to allow test to continue.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-04 13:23:35 +02:00
Jouni Malinen
ca5b81a5bb tests: wpa_supplicant ctrl_iface
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-04 13:10:57 +02:00
Jouni Malinen
e1a5e09ab7 tests: AP mode operations with wpa_supplicant
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-04 13:10:57 +02:00
Jouni Malinen
da10266224 tests: WEP
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:10:57 +02:00
Jouni Malinen
c9dc56231b tests: Add test cases for P2P+NFC
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 22:08:13 +02:00
Jouni Malinen
b21df6e779 tests: Run dump_monitor() again if scan was pending
In addition to running the FLUSH command again, the pending monitor
interface events need be cleared in case the driver was running a scan
when reset() is called. This avoids issues, e.g., with discovery_dev_id
failing due to an unexpected P2P-DEVICE-FOUND event that was generated
by the pending scan operation that had not yet complete when the first
dump_monitor() call in reset() happened.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-15 00:09:56 +02:00
Jouni Malinen
7559ad7af6 tests: Double the connection timeout for EAP cases
It looks like slow virtual machines may have issues to complete some EAP
authentication cases (e.g., EAP-EKE in ap_ft_eap) within the 10 second
timeout under load. Double the timeout to avoid incorrect test failures.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-13 20:47:01 +02:00
Jouni Malinen
c57c1ed6b3 tests: Clear data from ongoing scan on reset()
It was possible for the previous test case to leave unexpected BSS or
P2P peer table entries if a scan was in progress when the FLUSH command
was used. This could result in test failures, e.g., when running
discovery_dev_type_go followed by discovery_group_client where a P2P
peer was discovered on another channel at the end of the former test
case from a scan that was running durign the FLUSH operation that was
supposed to remove all P2P peers. This could result in
discovery_group_client failing due to dev[2] trying to send the
discoverability frame on incorrect channel (the one learned in the
previous test case) since discover_peer() skipped a new device
discovery. Fix this by running FLUSH operation again if a pending scan
operation is detected during the first FLUSH operation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-13 20:26:22 +02:00
Jouni Malinen
c70ebce0ba tests: P2P device discovery filtering on Device ID and Device Type
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 22:25:58 +02:00
Jouni Malinen
d4c7a2b9e6 tests: EAP-TLS with OCSP
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 17:45:56 +02:00
Jouni Malinen
2d10eb0efd tests: PKCS#12 use for EAP-TLS
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 17:18:22 +02:00
Jouni Malinen
3b74982f93 tests: subject_match and altsubject_match
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 17:04:35 +02:00
Jouni Malinen
53a6f06a0b tests: EAP-FAST
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 16:42:15 +02:00
Jouni Malinen
33de4f2d7a tests: External password storage
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 22:32:12 +02:00
Jouni Malinen
f19ee5b7f7 tests: Hidden SSID
In addition, add the earlier tests in the new test_ssid.py file that was
forgotten from the previous commit
d78f33030d.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 20:23:56 +02:00
Jouni Malinen
d0ce105068 tests: Verify EAP-PEAP/EAP-TLS
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:11 +02:00
Jouni Malinen
6daf5b9c1c tests: Add more EAP fragmentation tests
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:11 +02:00
Jouni Malinen
d4b21766e5 tests: Force p2p_find in p2p_service_discovery_fragmentation
It was possible for this test case to fail if P2P_FLUSH was issued
during a search scan and that scan adding back the peer. Avoid this by
forcing p2p_find to be started regardless of the current P2P peer table
contents for each round of service discovery.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:11 +02:00
Jouni Malinen
710f96fd8c tests: Remove unnecessary reset() steps
The FLUSH command clears disallow_aps, p2p_disabled, and
p2p_per_sta_psk, so there is no need to clear them separately.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
36408936f8 tests: Optimize wait_event()
Replace the fixed 100 ms waits with a select()-based wait and timeout
for full wait based on monotonic time to optimize wait_event().

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
d7a99700de tests: Clean up and optimize gas_concurrent_scan and _connect
No need to run a full scan as the first step since it only needs to find
the AP from a known channel for the GAS operation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-05 22:33:06 +02:00
Jouni Malinen
ad36d27d6a tests: Remove ignore_old_scan_res workaround
Now that wpa_supplicant requests the driver (cfg80211) to clear its scan
cache automatically after each BSS_FLUSH/FLUSH command, the previously
used ignore_old_scan_res workaround should not be needed for the hwsim
test cases anymore.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-03 08:59:59 +02:00
Jouni Malinen
d78f33030d tests: SSID contents and encoding
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:03:39 +02:00
Jouni Malinen
20e5c2830f tests: Add IEEE 802.1X and dynamic WEP test cases
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:03:39 +02:00
Jouni Malinen
6e917c3e25 tests: Increase nl80211 test coverage with monitor/connect
Add test cases to use connect command instead of auth+assoc commands and
AP mode operations using the old monitor interface design.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 15:45:18 +02:00
Jouni Malinen
9489637b42 tests: Verify dynamic wpa_supplicant interface addition/removal
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 15:45:18 +02:00
Jouni Malinen
0fab9ce67a tests: Verify PMKSA caching
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 19:25:42 +02:00
Jouni Malinen
a6cf5cd655 tests: Verify SAE anti-clogging mechanism
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 17:18:17 +02:00
Jouni Malinen
6645ff5094 tests: Verify WPS AP Setup Locking on AP PIN failures
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 10:00:32 +02:00
Jouni Malinen
b553eab1a9 tests: Verify FT-over-DS
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 10:00:31 +02:00
Jouni Malinen
4a5a5792f1 tests: Verify PeerKey handshake
NOTE: Actual use of the direct link (DLS) is not supported in
mac80211_hwsim, so this operation fails at setting the keys after
successfully completed 4-way handshake. This test case does allow the
key negotiation part to be tested for coverage, though.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-28 16:32:54 +02:00
Jouni Malinen
cf9189b94c tests: Verify scan behavior
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 20:50:23 +02:00
Jouni Malinen
dcd6816817 tests: Verify Interworking network selection with other EAP types
This adds number of test cases to go through various possible EAP
configurations for Interworking network selection.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
e209eb989c tests: Verify Interworking network selection based on roaming consortium
In addition, use PEAP as the EAP method to increase testing coverage.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
459e96cd3b tests: Interworking network select with simulated SIM/USIM
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
2cdd91d8b1 tests: Verify sharing and unsharing of ANQP results
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:44 +02:00
Jouni Malinen
0589f40146 tests: Use a single channel scan to avoid unnecessary full scans
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:44 +02:00
Jouni Malinen
715bf904ff tests: Verify Interworking Probe Request filtering
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 13:37:06 +02:00
Jouni Malinen
0eff1ab3cb tests: Add test cases for various ciphers
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-25 11:17:32 +02:00
Jouni Malinen
41af1305d7 tests: Add test cases for concurrent P2P operations
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 21:20:15 +02:00
Jouni Malinen
19ae1d0788 tests: Verify P2P operations with a separate group interface
This extends P2P test coverage to include the case of separate group
interface use with autonomous GO and group formation through GO
negotiation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 15:32:52 +02:00
Jouni Malinen
b4264f8f67 tests: Verify disallow_aps with Interworking
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-07 00:12:30 +02:00
Jouni Malinen
6a0b400273 tests: Verify no-duplicate-networks with Interworking connection
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-07 00:12:30 +02:00
Jouni Malinen
d355372ce4 tests: HS 2.0 excluded SSID
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-04 14:48:33 +02:00
Jouni Malinen
d1ba402fe5 tests: HS 2.0 required roaming consortium
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-04 14:48:28 +02:00
Jouni Malinen
2232edf8e2 tests: Use dictionary as add_cred_values() parameter
This makes it more convenient to use this function for cases that modify
credential parameters.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-04 13:12:34 +02:00
Jouni Malinen
e114c49cfc tests: Add an EAP-TLS test case
This fixes the user.key file (incorrect key was copied previously) and
adds a test case for EAP-TLS with WPA2-Enterprise.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
22b99086ce tests: Add more EAP test cases
This increases EAP method coverage for WPA2-Enterprise to include
EAP-pwd, EAP-GPSK, EAP-SAKE, EAP-EKE, EAP-IKEv2, EAP-PAX, and EAP-PSK.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
57661377df tests: Use a helper function to rename wpa_supplicant/hostapd logs
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-02 13:04:06 +02:00
Jouni Malinen
c9aa430896 tests: Split run-tests.py logger info into per test case files
The run-tests.py -l argument does not take an argument value anymore.
Instead, debug output is directed to a separate file <test>.log for each
test case.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 12:51:08 +02:00
Jouni Malinen
709f18d501 tests: Add a test for dynamic hostapd config change
test_ap_change_ssid verifies that the SET and RELOAD control interface
commands can be used to change the SSID of a hostapd-controlled WPA2-PSK
AP, i.e., for a case where the PSK needs to be derived again after the
SSID change.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-29 17:17:04 +02:00
Jouni Malinen
bbe867672e tests: Add helper functions for Hotspot 2.0 test cases
These make it easier to add new test cases for Interworking network
selection.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-29 14:20:29 +02:00
Jouni Malinen
46f2cfcefc tests: Add P2P channel selection test cases for group formation
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-26 23:49:10 +03:00
Jouni Malinen
72c052d525 tests: Add domain_suffix_match validation
This verifies that domain_suffix_match works correctly both for the
matching and mismatching cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-20 21:38:02 +03:00
Jouni Malinen
efd43d85bd tests: Test case for Hotspot 2.0 with external SIM processing
This verifies network selection using 3GPP Network Information and
connection using EAP-SIM with GSM authentication handled by an external
program.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-20 13:41:23 +03:00
Jouni Malinen
9626962d2f tests: Add test cases for WPA2-Enterprise
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 20:35:26 +03:00
Jouni Malinen
5f3eddac8e tests: Add test cases for P2P service discovery
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 13:15:26 +03:00
Jouni Malinen
7ebf841fc5 tests: Test GO functionality with legacy STAs
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 12:42:05 +03:00
Jouni Malinen
6ca3a98bc2 tests: Wait for driver scan state to clear between tests
cfg80211/mac80211 seems to getting stuck with scans every now and then.
Check for this special state and delay return from reset() until the
driver has stopped the scan operation. This reduces likelihood of
failing multiple test cases in a row because of a single error.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-28 18:18:33 +03:00
Jouni Malinen
ef2bd5a344 tests: Add a test case for P2P invitation
test_p2p_go_invite verifies that GO can invite a peer in a case where
the operating channel and peer's listen channel are different.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-28 12:09:40 +03:00
Jouni Malinen
9d507452dd tests: Clear global monitor interface on dump_monitor()
This avoids some issues with the global control interface socket
getting stuck with send buffer limit reached if test cases did not
use wait_global_event().

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-25 16:45:45 +03:00
Jouni Malinen
ea0e92eef5 tests: Check wpa_supplicant connection after reset
Some test runs have resulted in wpa_supplicant being unresponsive or
very slow on the control interface. Check for that type of issues as
part of the reset sequence that is done between each test case.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-03 12:13:25 +03:00
Jouni Malinen
2c914e2464 tests: Use a helper function for waiting session termination
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 21:35:10 +03:00
Jouni Malinen
451afb4fd3 tests: Add test cases for persistent P2P groups
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 21:35:10 +03:00
Jouni Malinen
b162675fd9 tests: Add test cases for per-STA PSK in P2P group
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 21:35:10 +03:00
Jouni Malinen
0fa28afe35 tests: Use wpa_supplicant global control interface for P2P
This allows more consistent interface to be used regardless of which
P2P driver design is used (especially for P2P management operations
over netdev vs. dedicated P2P_DEVICE).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-01 00:36:33 +03:00
Jouni Malinen
6edaee9c82 tests: Test WPS ER UPnP functionality to add Enrollees
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-28 22:00:58 +03:00
Jouni Malinen
93a06242ce tests: Add a test case for Hotspot 2.0 network selection
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-01 01:01:24 +03:00
Jouni Malinen
62d58f7ae3 tests: Use FLUSH command to clear wpa_supplicant state
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 20:32:33 +03:00
Jouni Malinen
803edd1c09 tests: Fix BSS table flushing and old result ignoring for WPS tests
The WPS tests are more prone to fail if scan results from the previous
test cases are allowed to remain in the wpa_supplicant BSS table during
the consecutive test since the test setup uses the same BSSID for the
test APs that change their configuration. Avoid these mostly bogus
issues by enforcing wpa_supplicant to drop and ignore old scan results
during the WPS test cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:42 +03:00
Jouni Malinen
302b7a1b09 tests: Add test cases for WPS operations
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 12:46:05 +03:00
Jouni Malinen
5924d4c105 P2P: Add a test case for discovering a P2P client in a group
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 20:17:11 +02:00
Jouni Malinen
835a546b20 tests: Add test cases for PMF
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 13:47:22 +02:00
Jouni Malinen
5126138c9e tests: Add roaming test cases
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 11:28:39 +02:00
Jouni Malinen
b61e418c35 tests: Add helper functions for connection to an AP
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 20:41:57 +02:00
Jouni Malinen
81266da728 tests: Add initial AP tests with hostapd
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-27 14:29:01 +02:00
Jouni Malinen
1a4d80b8d5 tests: Group formation with PBC
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-17 11:10:59 +02:00
Jouni Malinen
5743006d36 tests: Add P2P device discovery and provision discovery test case
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-17 10:58:48 +02:00
Jouni Malinen
d963f03772 tests: Use social-only scan by default to speed up tests
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-16 11:47:01 +02:00
Jouni Malinen
4d7d61b689 tests: Fix wait duration
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-16 11:21:22 +02:00
Jouni Malinen
07a2e61b43 tests: Use wlantest to validate TDLS behavior
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 19:01:56 +02:00
Jouni Malinen
7cb08cdbd6 tests: Add a test case for using TDLS in a P2P group
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 18:24:32 +02:00
Jouni Malinen
f3f8ee882f tests: Add support for separate P2P group interfaces
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 17:34:08 +02:00
Jouni Malinen
4ea8d3b5cf tests: Add autonomous GO testing
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 16:30:25 +02:00
Jouni Malinen
f7b1a75036 tests: Validate GO Negotiation status code
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 16:07:01 +02:00
Jouni Malinen
809079d3ea tests: GO Negotiation with both devices using GO intent 15
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 16:07:01 +02:00
Jouni Malinen
c68f9a61c6 tests: Report group formation results as a dict
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 16:07:01 +02:00
Jouni Malinen
a311c61dd6 tests: Add test execution mechanism
run-p2p-tests.py can now be used to run all P2P test cases. The
actual test cases are defined in test_p2p_*.py files.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-02 12:55:07 +02:00
Jouni Malinen
3eb29b7b47 tests: Check connectivity in the P2P group
Use hwsim_test to verify that the formed group has working data
connectivity.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-02 11:38:56 +02:00
Jouni Malinen
1ae73b03be Add a starting point for mac80211_hwsim-based testing
This will hopefully grow over time to become a much more complete
testing mechanism that uses mac80211_hwsim to verify various
wpa_supplicant and hostapd functions automatically.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-02 01:05:03 +02:00