Commit graph

2195 commits

Author SHA1 Message Date
Chengyi Zhao
8a901d750b D-Bus: Emit signal when a station is authorized or deauthorized
Add "StaAuthorized" and "StaDeauthorized" D-Bus interface in AP mode.
After enabling the AP mode of wpa_supplicant, the other process need to
get the MAC address and authorization status of every station, so
wpa_supplicant emits signal when the station is authorized or
deauthorized.

Signed-hostap: Chengyi Zhao <chengyix.zhao@gmail.com>
2013-06-22 12:09:09 +03:00
Andrei Otcheretianski
9578329874 Add AVG_RSSI report in signal_poll
Add AVG_RSSI report to the signal_poll command if it is reported by
the kernel.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-06-22 12:01:05 +03:00
Andrei Otcheretianski
2cc8d8f4e8 Add bandwidth and center freq info to signal_poll
Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-06-22 12:00:46 +03:00
Alexander Bondar
1e0e943e19 Remove 802.11b rates only in case of P2P group operation
11b rates removal have had impact on SoftAP functionality in
wpa_supplicant. This patch verifies that only in case of P2P group
operation 11b rates will be eliminated. Refer also to commit
4c2c302893.

Signed-hostap: Alexander Bondar <alexander.bondar@intel.com>
Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-06-22 11:28:33 +03:00
Jouni Malinen
ec7b97ab00 Interworking: Add support for using eap_proxy offload
Fetch IMSI through eap_proxy for Interworking network selection if
needed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-19 18:42:17 +03:00
Jouni Malinen
aa20e1a1fb Remove CONFIG_NO_WPA2 build parameter
There is not much use for enabling WPA without WPA2 nowadays since most
networks have been upgraded to WPA2. Furthermore, the code size savings
from disabling just WPA2 are pretty small, so there is not much
justification for maintaining this build option. Remove it to get rid of
undesired complexity.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 20:13:25 +03:00
Jouni Malinen
5d5c4ee5e0 Remove compiler warnings with CONFIG_NO_SCAN_PROCESSING
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 20:04:56 +03:00
Jouni Malinen
9aaa6955a8 Remove compiler warnings if TDLS is enabled without WPA2
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 20:04:12 +03:00
Bharat Bhushan
1aef400bf0 IBSS RSN: Implement disconnect() callback using sta_deauth()
This allows driver wrappers to implement disconnection of IBSS peers in
cases operations, e.g., GTK update, fail.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 13:07:17 +03:00
Wei-Jen Lin
4abc0424ef P2P: Automatic channel selection at re-invocation of persistent GO
If the driver wrapper supports best operation channel indication, the
p2p_group_add command can now use special values (freq=2 and freq=5) to
indicate that the re-invoked persistent GO is to be started on the
specified band.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-05 02:06:29 +03:00
Jouni Malinen
e78aaca0da Stop TKIP countermeasures on FLUSH command
This is needed to get wpa_supplicant into clean state during testing if
a test case triggers countermeasures.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-24 16:02:58 +03:00
Jouni Malinen
376204934d wpa_cli: Support tab completion with ifname= prefix
Enable tab completion for the cases where ifname= prefix is used in
interactive mode by skipping over that prefix before running through the
per-command completion routines. The ifname= prefix itself is also
covered by adding the possible interface names to the command list.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-23 20:35:02 +03:00
Jouni Malinen
13b11ba702 wpa_cli: Allow IFNAME= prefix to be used
Strip out the IFNAME=<ifname> prefix from commands before parsing them
through the normal processing and then add the prefix back to the
beginning of the actual control interface command to make per-interface
commands work through the global control interface without having to use
the 'raw' command.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-23 20:04:17 +03:00
Jouni Malinen
ae8535b6e1 WNM: Make ESS Disassoc Imminent event more convenient to use
Define a proper event prefix and include additional information to allow
ESS Dissassociation Imminent event to be used in a wpa_cli action
script.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-23 16:51:03 +03:00
Jouni Malinen
6df634faf9 WNM: Do not reject ESS Disassoc Imminent
This indication is not expected to include candidates, so do not reject
it based on that.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-23 16:50:55 +03:00
Jouni Malinen
7b53acd395 WNM: Use defines for BSS Trans Mgmt field values
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-23 16:50:39 +03:00
Jouni Malinen
dad153d16b Try to use fast-associate on ENABLE_NETWORK
This makes ENABLE_NETWORK behave similarily to SELECT_NETWORK by
allowing a scan to be skipped if recent scan results are available.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-22 16:10:59 +03:00
Jouni Malinen
b06800170a Fix already-associated detection with driver-based BSS selection
wpa_s->pending_bssid is all zeros during connection attempt when
driver-based BSS selection is used. Take this into account when
determining whether new scan results should trigger a connection based
on wpa_s->current_ssid, i.e., a connection attempt with the selected
network instead of selected BSS.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-22 16:10:59 +03:00
Sean Lin
72728c6fa8 P2P: Relax channel forcing for invitation processing with MCC support
When STA interface is connected and P2P interface gets invited in a
different channel from previous P2P group, the invitiation would fail
because of no common channel found. Fix this by using different logic
when device support multi channel concurrency.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-22 13:29:46 +03:00
Jouni Malinen
f65f539d9a GAS: Reduce query timeout to two seconds
The five second timeout for GAS queries is excessive and can result in
long waits in cases where APs are either misconfigured or frames are
lost.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:09:34 +03:00
Jouni Malinen
7a56af545a GAS: Assign new dialog token even if previous one is free
This makes the design more robust against unexpected duplicates since
each new GAS exchange gets a different dialog token compared to the
previous one.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:09:16 +03:00
Jouni Malinen
9e1ecab1c5 GAS: Ignore replays if previous frag_id without dropping GAS session
It looks like it may be possible for an older GAS response to get retransmitted
even after the first copy has been processed. While this should not really come
up all the way to wpa_supplicant due to sequence number being same (i.e.,
duplicate detection should from the frame), some cases have been observed where
this did cause issues. Drop such a frame silently without dropping the ongoing
GAS session to allow a frame with the next frag_id to be processed after this.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:08:47 +03:00
Jouni Malinen
fa7ae9501b Add test code for fetching the last configured GTK
This can be useful for some test cases, so allow wpa_supplicant to be
built with special test functionality to expose the current (last
configured) GTK. This is disabled by default and can be enabled by
adding following line into .config:
CFLAGS += -DCONFIG_TESTING_GET_GTK

The GTK can then be fetched with "wpa_cli get gtk".

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:00:56 +03:00
Jouni Malinen
576bce9c86 P2P: Direct global ctrl_iface commands automatically for P2P
The P2P management operations like P2P_FIND and P2P_CONNECT are not
really specific to any network interface. These are P2P Device level
operations that are in more global device context. Allow those to be
sent through the global control interface without IFNAME parameter.

For now, these commands are directed within wpa_supplicant to the
network interface that initialized the global P2P context. This may
change in the future if a special context is added for P2P operations.
Anyway, such changes can now be done internally within wpa_supplicant
without affecting this global control interface design from external
view point.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 19:41:08 +03:00
Jouni Malinen
c4bf83a723 P2P: No duplicate AP-STA-CONNECTED/DISCONNECTED as global event
These events are sent as a special case to both the group interface and
"parent interface" (i.e., the interface that was used for managing P2P
negotiation). The latter is not really correct event, so get rid of it
with the new global control interface design where there is no need to
support legacy upper layer implementations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 19:18:31 +03:00
Jouni Malinen
92c4465b75 P2P: Mark P2P events global (not specific to interface)
This removes the "IFNAME=<ifname> " prefix from P2P events that are
received through the global control interface since these events are not
really specific to any network interface, but the full device.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 18:59:51 +03:00
Jouni Malinen
ed496f131f P2P: Clean up debug prints
Replace direct wpa_msg() calls with p2p_dbg(), p2p_info(), and p2p_err()
calls that use a new debug_print() callback to handle actual debug
printing outside the P2P module.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 18:47:36 +03:00
Jouni Malinen
710ae9ac1f P2P: Move p2p_find stopped event message into p2p_supplicant.c
This removes wpa_ctrl.h dependency from src/p2p/* and makes the P2P
events more consistent, i.e., everything that is aimed for upper layer
processing from the wpa_supplicant control interfaces is generated in
p2p_supplicant.c.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 16:06:40 +03:00
Jouni Malinen
47bfe49c31 Add wpa_msg_global() for global events
This function can be used instead of wpa_msg() and wpa_msg_ctrl() to
indicate that an event is not specific to a network interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 14:19:24 +03:00
Jouni Malinen
214e428b42 Allow global ctrl_iface monitors
The ATTACH/DETACH mechanism to request event messages from
wpa_supplicant can now be used through the global control interface,
too. This results in events from all interfaces being delivered through
a single monitor socket. "IFNAME=<ifname> " prefix is used on events
that are specific to an interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 14:07:28 +03:00
Dmitry Shmidt
89c7ac570b wpa_cli: Set buffer length the same as in wpa_supplicant_ctrl_iface_process()
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-05-18 12:21:44 +03:00
Jouni Malinen
faf9a8585d Add band option (2.4 vs. 5) for filtering scans
This can be used to implement filtering of channels for scan and based
on that, for connection, purposes.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-18 12:17:10 +03:00
Jouni Malinen
b83b1b2da8 Android: Clarify keystore include directories
This updates hostapd to build using the new keystore header file
location and adds a note that the old frameworks/base/cmds/keystore can
be removed at some point in the future when old Android releases do not
need to be supported.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 12:03:35 +03:00
Jouni Malinen
d2a9e2c76d Abstract and Android sockets for global ctrl_iface
The wpa_supplicant global control interface parameter can now be used to
explicitly specify an abstract UNIX domain socket (Linux specific
extension) with "@abstract:" prefix and an Android control socket with
"@android:" prefix.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 11:42:09 +03:00
Jouni Malinen
6fd5ceaf70 wpa_cli: Allow global interface to be used in interactive mode
This is mostly a corner case at this point, but if wpa_cli was started
with global control interface connection (-g) and interactive mode,
per-interface control interface was tried to be opened with the
previously opened global ctrl_iface connection gettign leaked.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 11:40:23 +03:00
Jouni Malinen
2925756575 wpa_supplicant: Add -G argument to specify global ctrl group
The optional -G<group> command line argument can be used to specify the
group that can access the global control interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 11:00:05 +03:00
Jouni Malinen
cf3bebf28c Allow global ctrl_iface to be used for per-interface commands
"IFNAME=<ifname> " prefix can now be used on the wpa_supplicant global
control interface to direct a command to a specific interface instead of
having to use an interface specific control interface for this. This
allows a single socket to be used for controlling multiple virtual
interfaces.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 10:19:38 +03:00
Suryadevara Sudheer
c6ccf12d3f P2P: Use preferred channel list during GO creation
This extends support for p2p_pref_Chan configuration parameter for
autonomous GO creation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-17 11:27:02 +03:00
Yufeng Wang
010b5f9bfc P2P: Fix p2p_pref_chan setting from configuration file
Commit 21d996f775 added p2p_pref_chan as a
configuration file parameter, but included only the case of dynamically
setting this at runtime through the control interface SET command.
Complete this functionality by taking this value into use directly from
the configuration file, too.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-17 11:03:52 +03:00
Daniel Gnoutcheff
d7692b8d1c dbus: Terminate cleanly on messagebus shutdown
By default, dbus_connection_dispatch() will call _exit() if the bus
connection has been closed. This caused wpa_supplicant to terminate
without properly cleaning up after itself.

To ensure that we terminate cleanly when the messagebus terminates,
override the exit_on_disconnect behavior and install a filter to handle
libdbus's "Disconnected" signal.

[Bug 474]

Signed-hostap: Daniel Gnoutcheff <daniel@gnoutcheff.name>
2013-05-16 20:47:28 +03:00
Vinayak Kamath
e2396a684e WNM: Enable CONFIG_WNM in Android.mk
Signed-hostap: Vinayak Kamath <vkamat@codeaurora.org>
2013-05-16 17:51:18 +03:00
Vinayak Kamath
65bcd0a92d WNM: Add sending of BSS Transition Management Query
The new control interface command can be used to send a
BSS Transition Management Query frame to the current AP.

Signed-hostap: Vinayak Kamath <vkamat@codeaurora.org>
2013-05-16 17:50:31 +03:00
Vinayak Kamath
e27d20bb68 WNM: Add neighbor report processing for BSS Transition Management
Process the neighbor report received in BSS Management Request frames.

Signed-hostap: Vinayak Kamath <vkamat@codeaurora.org>
2013-05-16 17:48:59 +03:00
Jouni Malinen
f3e907a745 WPS: Clear connection failure counts on WPS success
The WPS provisioning case does not result in successful connection by
design and as such, this can result in networks getting temporarily
disabled. Avoid this by clearing the failure counts on WPS success.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-15 17:33:50 +03:00
Jouni Malinen
170f5663dc WPS NFC: Connect using learnt credential after NFC Tag read
Instead of just adding the new network, prefer the network learnt from a
configuration token during the first connection attempt. This makes the
WPS NFC case behave similarly to the in-band provisioning cases if there
are more preferred networks in the scan results.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-15 16:46:45 +03:00
Jouni Malinen
e679f140b9 Mark interface disconnected on removal request
This cleans up debug log by not trying to process the disconnection
event as a failure that could result in blacklist addition and auto
connect attempt. These are pointless operations since the interface is
going to removed immediately after this.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-12 19:18:55 +03:00
Jouni Malinen
3636b891b7 Do not try auto connect mechanism in disconnected state
This cleans up debug log by not requesting the auto connect on
dissassociation event if we are already in disconnected state and would
not try to connect anyway.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-12 19:18:55 +03:00
Jouni Malinen
0cdb93fe9f Do not add BSS to blacklist on local disconnection request
There is no point in marking a BSS temporarily blacklisted based on a
connection failure or disconnection case if that happens as a result of
a local request to disconnect. The blacklist entry could result on
unexpected BSS getting selected on the next connection attempt. In
addition, the code to try to find another BSS within the ESS could
result in scanning a single channel on the next attempt. Fix these
issues by handling the connection failure events only if we are not in
disconnected state (i.e., would try to reconnect after this
automatically).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-12 19:18:55 +03:00
Deepthi Gowri
36b9883d84 Defer scan if connection is in progress on any of the shared interfaces
Scanning can delay concurrent operations considerably, so it is better
to avoid that while trying to connect on any of the virtual interfaces
that share the same radio.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-10 16:10:50 +03:00
Ben Greear
6124e858fd wpa_supplicant: Allow vifs to scan only current channel
If a VIF is already associated, then only scan on the associated
frequency if user requests such. This is a big help when using
lots of virtual stations.

Signed-hostap: Ben Greear <greearb@candelatech.com>
Signed-off-by: Ben Greear <greearb@candelatech.com>
2013-05-09 12:43:40 +03:00