Commit graph

48 commits

Author SHA1 Message Date
Marek Kwaczynski
8a45811638 hostapd: Add Operating Mode Notification support
Handle Operating Mode Notification received in (Re)Association Request
frames.

Signed-hostap: Marek Kwaczynski <marek.kwaczynski@tieto.com>
2014-02-14 19:30:05 +02:00
Jouni Malinen
f0cbb986ff Add DRIVER-STATUS command for hostapd
This is just like the same command in wpa_supplicant, i.e., "hostapd_cli
status driver" can be used to fetch information about the driver status
and capabilities.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:12 +02:00
Janusz Dziedzic
6c6c58d157 hostapd: Make hostapd_set_freq_params() public
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-12-07 20:50:15 -08:00
Andrei Otcheretianski
bf281c129f Add AP channel switch mechanism
Build CSA settings and call the driver to perform the switch. Construct
Beacon, Probe Response, and (Re)Association Response frames both for CSA
period and for the new channel. These frames are built based on the
current configuration. Add CSA IE in Beacon and Probe Response frames.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-11-17 17:12:58 +02:00
Jouni Malinen
dc036d9ee0 DFS: Convert hostapd_data use to hostapd_iface
DFS operations are specific to the interface (radio/wiphy), not BSS
(netdev/vif), so hostapd_iface is the appropriate element to use in
them.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
2db938e8de hostapd: Fill in phyname automatically
If per-BSS configuration enabling did not provide a phy name, iface->phy
was left empty. It can be helpful to set this up automatically, so fill
that when initializing the interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
f0793bf191 hostapd: Wait for channel list update after country code change
If hostapd is requested to set the country code and the previous country
code differs from the new one, the channel list information from the
driver may change. This change may not be instant, so wait for an
EVENT_CHANNEL_LIST_CHANGED event before continuing interface setup with
fetching of the channel list information. This fixes issues where the
selected channel is not available based on the previous regulatory data
and update through CRDA takes some time.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
2aec4f3c0c Allow add-BSS operation to re-use existing netdev
When removing and re-adding the first wlan# netdev to hostapd
dynamically, the netdev is already present and should not be removed and
re-added to maintain its state as not-added-by-hostapd so that it does
not get removed automatically.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 22:34:25 +02:00
Kyeyoon Park
c551700f1f Interworking: Add support for QoS Mapping functionality for the AP
This allows QoS Map Set element to be added to (Re)Association Response
frames and in QoS Map Configure frame. The QoS Mapping parameters are
also made available for the driver interface.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Janusz Dziedzic
58b73e3dd9 hostapd: DFS with 40/80 MHz channel width support
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-17 21:05:44 +03:00
Janusz Dziedzic
e76da50529 hostapd: Add AP DFS support
Add DFS structures/events handlers, CAC handling, and radar detection.
By default, after radar is detected or the channel became unavailable, a
random channel will be chosen.

This patches are based on the original work by Boris Presman and
Victor Goldenshtein. Most of the DFS code is moved to a new dfs.c/dfs.h
files.

Cc: Boris Presman <boris.presman@ti.com>
Cc: Victor Goldenshtein <victorg@ti.com>

Signed-hostap: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-17 21:05:15 +03:00
Michal Kazior
0185007c2e hostapd: Add survey dump support
This adds survey dump support for all frequencies
and for specific desired frequencies. This will later
be used by ACS code for spectrum heuristics.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-08-25 18:35:25 +03:00
Sujith Manoharan
69dd2967db WDS: Fix WEP usage with nl80211 wds_sta=1
The static WEP keys have to be configured for the new VLAN
interface that is created for a 4addr WDS peer, not doing so
breaks WEP functionality in nl80211/4addr based WDS links.

Signed-hostap: Sujith Manoharan <c_manoha@qca.qualcomm.com>
2013-07-20 17:41:22 +03:00
Vivek Natarajan
3c4ca36330 hostapd: Support MAC address based access control list
Enable MAC address based ACL for the drivers which advertise
this capabilty with NL80211_ATTR_MAC_ACL_MAX. Either of blacklist
or whitelist is supported, though, not simultaneously.

Signed-hostap: Vivek Natarajan <nataraja@qca.qualcomm.com>
2013-05-24 13:26:35 +03:00
Johannes Berg
a9a1d0f08a hostapd: Pass VHT capabilities to driver wrapper
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-01-12 17:51:52 +02:00
Johannes Berg
fa4763369a hostapd: Allow configuring driver to VHT
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-01-12 17:51:52 +02:00
Xi Chen
a884be9da1 WNM: Add placeholders for WNM driver commands and events
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-01 13:21:20 +03:00
Jay Katabathuni
fb80e86e7d Add hostapd_drv_send_action()
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-26 22:52:37 +02:00
Jouni Malinen
0f3d578efc Remove the GPL notification from files contributed by Jouni Malinen
Remove the GPL notification text from the files that were
initially contributed by myself.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-11 19:39:36 +02:00
Jason Young
5d06163714 AP: Pass station's WMM configuration to driver wrappers
This updates a previous patch did more or less the same thing by
providing the qosinfo as a single variable to the driver wrappers.

Signed-hostap: Jason Young <jason.young@dspg.com>
2011-12-17 12:38:06 +02:00
Eliad Peller
5f32f79c6e AP: Add uapsd_queues and max_sp fields
Add uapsd_queues and max_sp fields to sta_info struct,
and pass them to the sta_add callback.

These values are determined by the WMM IE in the (Re)Association Request.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2011-12-17 11:55:14 +02:00
Jouni Malinen
e5693c4775 Merge set_rate_sets() driver_ops into set_ap()
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 12:16:03 +02:00
Jouni Malinen
5f17b3ee9f Remove unused parameters from set_rate_sets()
Only setting of the basic rate set was supported, so remove the
unused parameters.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 11:57:13 +02:00
Helmut Schaa
8cfa3527e1 Allow MLME frames to be sent without expecting an ACK (no retries)
In some situations it might be benefical to send a unicast frame without
the need for getting it ACKed (probe responses for example). In order to
achieve this add a new noack parameter to the drivers send_mlme callback
that can be used to advise the driver to not wait for an ACK for this
frame.

Signed-hostap: Helmut Schaa <helmut.schaa@googlemail.com>
2011-11-19 19:02:05 +02:00
Jouni Malinen
451c367d06 Remove unused valid_bss_mask driver_ops 2011-10-29 11:34:29 +03:00
Johannes Berg
bcf24348ed AP: Do station poll in driver wrapper
This offloads the station polling to driver wrappers, which may offload
it again to the driver. The hostap driver wrapper uses "real" data
frames while nl80211 uses null data frames.

Also add a specific event to indicate that a poll was successful for
future use with the nl80211 driver.
2011-10-20 21:03:08 +03:00
Jouni Malinen
31357268e5 Move AP BSS configuration parameters into set_ap()
Remove the separate driver_ops functions set_cts_protect(),
set_preamble(), set_short_slot_time(), and set_ht_params(). These
belong into same set of operations as set_ap(), so there is no need
to maintain separate functions that just make the driver wrapper
more complex.

Since these have only been used with driver_nl80211.c, the driver_ops
can be removed immediately instead of maintaining backwards
compatibility period with the old functions.
2011-10-17 19:31:33 +03:00
Jouni Malinen
062390efd4 Start deprecating various AP mode driver_ops
The preferred way of configuring AP mode will be to use set_ap() instead
of number of separate operations hostapd has collected over the years.
2011-10-17 18:35:25 +03:00
Shan Palanisamy
a52eba0f44 FT: Add driver wrappers for FT with driver-based MLME/SME 2011-09-30 00:05:29 +03:00
Jouni Malinen
fb91db5639 Provide extra IEs for AP mode management frames with set_ap
Drivers that build Beacon, Probe Response, and (Re)Association
Response frames can use this information to and WPS and P2P IE
when needed.
2011-08-26 21:14:25 +03:00
Jouni Malinen
19c3b56685 Replace set_beacon() driver op with set_ap()
This change is a first step in better supporting different driver
architectures for AP mode operations with nl80211. This commit in
itself does not add new functionality, but it makes it easier to add
new AP mode parameters to address needs of drivers that have more of
the MLME/SME in firmware or kernel.
2011-08-10 13:22:37 +03:00
Arik Nemtsov
d83ab1fe37 hostapd: Set STA flags when adding a new station
When adding a new station, set the STA flags as part of the sta_add()
command. This ensures the flags are up to date when the station is added
by lower level drivers.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
2011-07-12 20:26:52 +03:00
Ken Zhu
41fd1d9e9a atheros: Fix auth_alg configuration for static WEP
When IEEE 802.1X is not enabled, driver_atheros.c needs to know how
to set authentication algorithms for static WEP.
2011-05-20 18:27:53 +03:00
Felix Fietkau
4378fc14eb nl80211: Send EAPOL frames as QoS data frames for QoS aware clients
This should fix EAPOL reauthentication and rekeying timeout issues
with Intel clients when using WMM (e.g., with IEEE 802.11n). These
stations do not seem to be able to handle EAPOL data frames as
non-QoS Data frames after the initial setup.

This adds STA flags to hapd_send_eapol() driver op to allow
driver_nl80211.c to mark the EAPOL frames as QoS Data frame
when injecting it through the monitor interface.
2011-04-02 22:03:05 +03:00
Jouni Malinen
e17a2477db nl80211: Extend bridge add/del operations for secondary BSSes
Previously, only the main interface was added to a bridge. Extend this
to apply to all configured BSSes.
2011-03-15 13:02:49 +02:00
Jouni Malinen
7392f11e96 Convert most commonly used drv ops to real function calls
Getting rid of these inline functions seems to reduce the code size
quite a bit, so convert the most commonly used hostapd driver ops to
function calls.
2010-11-24 17:01:21 +02:00
Jouni Malinen
0e8a96a911 Get rid of struct hostapd_driver_ops abstraction
This is not needed anymore and just makes things more difficult
to understand, so move the remaining function pointers to direct
function calls and get rid of the struct hostapd_driver_ops.
2010-11-24 16:50:06 +02:00
Jouni Malinen
3acdf771b8 hostapd_driver_ops reduction
send_eapol, set_key, read_sta_data, sta_clear_stats,
set_radius_acl_auth, set_radius_acl_expire, and set_beacon
to use inline functions instead of extra abstraction.
2010-11-24 16:34:49 +02:00
Jouni Malinen
51e2a27a21 hostapd_driver_ops reduction
set_sta_vlan, get_inact_sec, sta_deauth, sta_disassoc, and sta_remove
to use inline functions instead of extra abstraction.
2010-11-24 15:36:02 +02:00
Jouni Malinen
b5b1b18f39 hostapd_driver_ops reduction: set_countermeasures 2010-11-24 15:26:44 +02:00
Jouni Malinen
cee7d66b1d hostapd: Start removing struct hostapd_driver_ops abstraction
Commit bf65bc638f started the path to
add this new abstraction for driver operations in AP mode to allow
wpa_supplicant to control AP mode operations. At that point, the
extra abstraction was needed, but it is not needed anymore since
hostapd and wpa_supplicant share the same struct wpa_driver_ops.

Start removing the unneeded abstraction by converting
send_mgmt_frame() to an inline function, hostapd_drv_send_mlme().
This is similar to the design that is used in wpa_supplicant and
that was used in hostapd in the past (hostapd_send_mgmt_frame()
inline function).
2010-11-24 15:19:50 +02:00
Jouni Malinen
aefb53bd5d P2P: Disable periodic NoA when non-P2P STA is connected
For now, this applies to the test command that can be used to set
periodic NoA (p2p_set noa). The value are stored and periodic NoA
is enabled whenever there are no non-P2P STAs connected to the GO.
2010-09-09 07:17:20 -07:00
Jouni Malinen
f3585c8a85 Simplify driver_ops for virtual interface add/remove
There is no absolute requirement for separating address allocation
into separate functions, so simplify the driver wrapper interface
to use just if_add and if_remove instead of adding the new
alloc_interface_addr() and release_interface_addr() functions.

if_add() can now indicate if the driver forced a different interface
name or address on the virtual interface.
2010-04-11 19:23:09 +03:00
Jouni Malinen
d3e3a20565 Remove unnecessary ifname parameter from set_ht_params() driver op 2010-03-07 11:49:27 +02:00
Felix Fietkau
a2e40bb650 hostapd: Fix interface selection for the nl80211 driver
This patch allows the nl80211 driver to create its own per-bss context
and pass it to the drv_priv pointer of the hostapd bss state.
With this and the following patch, stations can associate to and switch
between multiple BSS interfaces of a single wiphy.
This obsoletes a few instances of passing ifname to a callback, those
can be removed in a separate patch.
It might also be useful to move more fields from the driver data to the
per-bss data structure in the future.
2010-03-06 22:22:56 +02:00
Jouni Malinen
6e6e8c31ff Replace src/ap/driver_i.h with non-inlined functions in ap_drv_ops.c 2009-12-26 00:21:22 +02:00
Jouni Malinen
8b06c1ed0d Remove ap_config.h dependency from driver_i.h
This adds explicit #include line for ap_config.h into the src/ap/*.c
files that actually use the definitions from there.
2009-12-26 00:12:25 +02:00
Jouni Malinen
70db2ab308 Move rest of the generic AP mode functionality into src/ap 2009-12-25 20:06:07 +02:00
Renamed from hostapd/ap_drv_ops.h (Browse further)