Commit graph

8180 commits

Author SHA1 Message Date
Masashi Honma
d5b95325de mesh: Fill Number of Peerings field in Mesh Formation Info
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-12-21 23:59:40 +02:00
Masashi Honma
46e8d90f6a mesh: Add debug message when peering limit is reached
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-12-21 23:55:44 +02:00
Masashi Honma
4b4093686b mesh: Make maximum number of peer links configurable
Maximum number of peer links is maximum number of connecting mesh peers
at the same time. This value is 0..255 based on the
dot11MeshNumberOfPeerings range.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-12-21 23:52:31 +02:00
Jouni Malinen
8b2600329f tests: Mesh beacon_int parameter
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 23:45:29 +02:00
Masashi Honma
9c58c5f72c mesh: Make beacon interval configurable
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-12-21 23:38:20 +02:00
Masashi Honma
3b797130d7 doc: Remove error on document creation
Unexpected trailing zero causes following error.

wpa_supplicant.sgml:472:53:E: character data is not allowed here

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-12-21 23:36:55 +02:00
Jouni Malinen
5554fbef46 tests: Make parallel VM start a bit more resource friendly
Wait one second between each kvm start to avoid hitting large number of
processes trying to start in parallel. This allows the VMs to be started
more efficiently for parallel-vm.py runs with large number of VMs.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 22:04:54 +02:00
Jouni Malinen
b3f4134912 tests: Clear cfg80211 BSS table at the end of scan_hidden
It was possible for the hidden SSID entry to leak into following test
cases and result in failures, e.g., in this sequence:

scan_hidden
scan_reqs_with_non_scan_radio_work
radius_auth_unreachable
wep_open_auth

BSS <BSSID> picked incorrect BSS entry within wpa_supplicant due to the
old zero-length SSID showing up from the earlier hidden SSID case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 21:58:47 +02:00
Jouni Malinen
2ffbf34db0 tests: Optimize test case execution order for multiple VMs
Move test cases with long duration to the beginning as an optimization
to avoid last part of the test execution running a long duration test
case on a single VM while all other VMs have already completed their
work.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 18:20:15 +02:00
Jouni Malinen
422ba11e30 Flush WPS registrar state on wpa_supplicant FLUSH command
This helps hwsim test cases by avoiding undesired state from previously
executed test cases affecting following tests.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 17:47:42 +02:00
Jouni Malinen
01c87519a3 tests: Do not mark proxyarp_open failed if ebtables is not available
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 17:14:00 +02:00
Jouni Malinen
f24489d94f tests: Use new scripts for vm-run.sh codecov
Now there is only one set of commands to maintain. The separate reports
for individual components have not been of much use in the past, so they
are dropped for now.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 16:41:59 +02:00
Jouni Malinen
cb0555f7be tests: EAP-IKEv2 protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 16:16:26 +02:00
Jouni Malinen
8779ac8a67 EAP-IKEv2: Fix a typo in a debug message
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 13:19:14 +02:00
Jouni Malinen
bb68a6e3cc EAP-IKEv2 peer: Fix fragmentation reassembly
ret->ignore needs to be cleared to FALSE when sending fragment ack
message to avoid ignoring the fragment.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 00:48:24 +02:00
Jouni Malinen
8e5c1ec32f EAP-IKEv2: Add explicit limit for maximum message length
This avoids accepting unnecessarily large memory allocations.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 00:25:16 +02:00
Jouni Malinen
f41f670ea5 tests: ERP with EAP-IKEv2
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 23:48:53 +02:00
Jouni Malinen
f1381f99e4 tests: Mesh ht_mode options
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 21:27:22 +02:00
Jouni Malinen
f86868c253 tests: wdev_id in STATUS-DRIVER
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 21:18:26 +02:00
Jouni Malinen
542452a93d tests: hostapd behavior with interface in different bridge
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 21:01:31 +02:00
Jouni Malinen
5ef8e39fa7 nl80211: Fix interface-in-different-bridge case
The local ifindex list needs to be updated only if the current bridge
interface is the correct one. If hostapd is going to move the interface
to another bridge, the old bridge ifindex must not be added. In
addition, when removing the bridge interface on deinit, it may need to
be set down to allow bridge removal.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 21:00:08 +02:00
Jouni Malinen
a42f88f8e7 tests: bg_scan_period parameter configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 19:44:40 +02:00
Jouni Malinen
6343f24d35 tests: IBSS cfg80211 workarounds
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 19:36:41 +02:00
Jouni Malinen
666e508ccf nl80211: Fix cfg80211 workaround for IBSS join
The interface was incorrectly changed to station mode between the two
IBSS join requests and that made the second attempt fail. Remove that
undesired mode clearing from this special case of IBSS leave sequence.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 19:35:23 +02:00
Jouni Malinen
cece9b7df7 tests: Dynamic BSS add operation reusing existing interface
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 19:04:18 +02:00
Jouni Malinen
8916857da6 tests: TDLS with VHT
This adds some more coverage, but the TDLS setup is not for VHT due to
missing support in mac80211.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 18:44:48 +02:00
Jouni Malinen
4466fe6541 tests: VHT and 40 MHz channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 18:44:48 +02:00
Jouni Malinen
d4d80e9a14 tests: SMPS AP configuration options
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 18:44:48 +02:00
Jouni Malinen
598555c7e8 tests: IEEE 802.1X with static WEP
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 18:44:48 +02:00
Jouni Malinen
13a3a20dfe Fix wpa_key_mgmt and wpa_pairwise configuration for non-WPA
These hostapd configuration parameter was left at the default values
(WPA-PSK/TKIP) even for cases where WPA was disabled. While these
parameters are not really used much in non-WPA cases, they do get used
for one corner case in nl80211 configuration to disable encryption of
EAPOL frames in IEEE 802.1X WEP case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 18:44:43 +02:00
Jouni Malinen
533fe09b78 nl80211: Fix no-encrypt for IEEE 802.1X WEP EAPOL
Commit 9f12614b8c ('nl80211: Do not
encrypt IEEE 802.1X WEP EAPOL') tried to use
NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT to disable encryption of EAPOL
frames for WEP IEEE 802.1X. However, it used incorrect key management
suite (IEEE 802.1X with WPA/WPA2 while the non-WPA version is needed
here). Consequently, the no-encrypt flag was never set to the driver
(WPA/WPA2 cases do not meet the WEP as pairwise criteria).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 17:35:03 +02:00
Jouni Malinen
1e7528298a tests: cfg80211 scan-for-auth workaround with WEP keys
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 17:28:53 +02:00
Jouni Malinen
a5687274e1 tests: cfg80211 scan-for-auth workaround failing
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 17:22:18 +02:00
Jouni Malinen
b97a7bf672 tests: Large number of BSS add operations with hostapd
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 17:13:00 +02:00
Jouni Malinen
863a54093d tests: rfkill block prior to wpa_supplicant start
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 16:46:39 +02:00
Jouni Malinen
1033315fbe nl80211: Remove send_and_recv_msgs_global() wrapper
There was only a single user for this and calling send_and_recv()
directly is as simple as using this wrapper.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 15:45:28 +02:00
Jouni Malinen
bdf5ccb264 nl80211: Remove unnecessary function declarations
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 15:37:16 +02:00
Jouni Malinen
d92da8a23e tests: Radar detection on non-HT and on HT40- channels
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:50:19 +02:00
Jouni Malinen
cac5526390 tests: Report ROAM failure in pmksa_cache_opportunistic_multiple_sta
There is no need to wait for the timeout if the ROAM command itself
failed. This could happen if an earlier test case had left hidden SSIDs
in the cfg80211 BSS table.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:37:08 +02:00
Jouni Malinen
1264b68355 tests: Clear cfg80211 scan results after wext_hidden
Leaving hidden SSIDs in the cfg80211 BSS table can result in errors in
the following test cases, so use special care to clear all BSS entries
at the end of the wext_hidden test case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:36:01 +02:00
Jouni Malinen
5f35a5e27f tests: Add wait_connected() and wait_disconnected() helpers
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:10:09 +02:00
Jouni Malinen
e0cccf26a4 tests: Add --codecov support to parallel-vm.py
This allows code coverage report to be generated must faster with the
help of parallel VMs executing test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 01:24:28 +02:00
Jouni Malinen
42ce1a27e0 tests: Connection with large number of scan_ssid=1 network blocks
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-19 23:30:58 +02:00
Jouni Malinen
ed930f064c tests: P2P_LISTEN and scan
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-19 23:17:06 +02:00
Jouni Malinen
558ac77c58 tests: setband and scans
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-19 23:08:10 +02:00
Jouni Malinen
209702d4c9 Add possibility to set the setband parameter
Commit faf9a8585d added mechanism for
selecting 2.4 or 5 GHz band for scan operation. However, no mechanism
for setting the setband value was added at that time. This commit adds a
new SET ctrl_iface parameter to allow the setband functionality to be
used. "SET setband <AUTO/5G/2G>" can be used to select all bands, 5 GHz
band only, or 2.4 GHz band only.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-19 22:56:41 +02:00
Jouni Malinen
7749b1c982 tests: Additional coverage for filter_ssids=1
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-19 20:26:07 +02:00
Jouni Malinen
91cc6f918a tests: AP_SCAN 2 operation
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-19 20:08:58 +02:00
Sunil Dutt
ee82e33d6a Do not trigger the scan during initialization on Android platforms
Android framework maintains a state to process the scan results after
the scan is issued. If wpa_supplicant issues the scan during the
initialization, the one issued by the framework may fail (with EBUSY) if
the host driver is already processing the scan. Thus, the scan results
returned for the first scan triggered by wpa_supplicant are not
processed for getting displayed resulting in delay for the display of
the first scan results after the Wi-Fi subsystem initialization. Thus,
trigger the scan only based on the framework request on Android.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-19 15:24:33 +02:00
Jouni Malinen
83e80d32f1 tests: SCAN requests while in non-scan radio work
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-19 15:23:07 +02:00