Commit graph

4848 commits

Author SHA1 Message Date
Jouni Malinen
c4fff52c89 tests: Add GO Negotiation without pre-authorization
This is the most common sequence for initiating GO Negotiation, so
include a test case that uses threads to follow both peers at the
same time to allow GO Negotiation to be re-initiated.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-16 11:36:59 +02:00
Jouni Malinen
4d7d61b689 tests: Fix wait duration
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-16 11:21:22 +02:00
Jouni Malinen
dbca75f82a P2P: Remove persistent group peer if it rejects invitation
If a peer replies to persistent group invitation with status code 8
(unknown group), remove the peer from the p2p_client_list if we are the
GO or remove the persistent group if we are the P2P client since it
looks like that the peer has dropped persistent group credentials and
the provisioning step needs to be executed again.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-15 16:43:06 +02:00
Jouni Malinen
b277a2bebc P2P: Allow shared interface channel preference to be ignored
p2p_ignore_shared_freq=1 in the configuration file (or "SET
p2p_ignore_shared_freq 1" on control interface) can now be used to
configure wpa_supplicant to ignore the preference on shared operating
channel when the driver support multi-channel concurrency. The default
behavior is to try to start any new P2P group on an operating channel
that is already in use on another virtual interface to avoid extra cost
from hopping between multiple channels. If this new parameter is set to
1, such preference is not used and instead, the channel for the new P2P
group is selected based on other preferences while ignoring operating
channels of any concurrent connection.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-14 16:32:35 +02:00
Jouni Malinen
6cb27aa85f P2P: Fix shared frequency preference for concurrent operations
Commit 50285f5ca8 changed number of rules
in channel selection and among other things, it broke the design where
the currently used operating channel on a virtual interface that is
shared by the same radio is preferred to avoid costs related to
multi-channel concurrency. Fix this regression by making the P2P module
aware of the shared channel and using that preference as the highest
priority when re-selecting the channel during negotiation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-14 16:26:55 +02:00
Jouni Malinen
62e10e6e3d P2P: Use best-overall channel in p2p_reselect_channel()
Commit 50285f5ca8 ended up forcing channel
re-selection in number of cases where the peer would actually have
accepted our initial preference. Fix the parts related to best channel
information by using best_freq_overall as the highest priority and by
skipping the band changes if the peer supports the channel that we
picked since these were based on the assumption that
p2p_reselect_channel() is called only if the peer could not accept our
initial choice which is not the case anymore.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-14 16:05:47 +02:00
Jouni Malinen
a70a52c316 P2P: Allow all channels for multi-channel concurrency (no negotiation)
Commit 79879f4ae8 enabled all channels to
be used when negotiating channel with a driver that supports
multi-channel concurrency. Extend that to cover cases where the channel
is not being negotiated (e.g., p2p_group_add to start a GO).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-14 15:38:11 +02:00
Sunil Dutt
4561526f83 TDLS: Disable link to existing peer with lower address
If the previously started setup is terminated in case both peers
initiate TDLS link at more or less the same time, disable the old link
to allow the dummy station entry to be deleted from cfg80211 so that a
new entry can be added for the setup direction that will be allowed to
proceed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-14 13:48:36 +02:00
Jouni Malinen
b6714ca1bb Fix compiler warning when CONFIG_IEEE80211R is not included
Commit 6a1ce39599 moved the bssid
variable declaration to be outside CONFIG_IEEE80211R block and
triggered a compiler warning about unused variable.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-13 12:40:57 +02:00
Jouni Malinen
94d7acf3df WPS NFC: Fix build without CONFIG_WPS_ER
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-13 00:02:52 +02:00
Deepthi Gowri
ee9a95c34e Android: Enable IEEE 802.11r in wpa_supplicant builds
Signed-off-by: Deepthi Gowri <deepthi@codeaurora.org>
2013-03-12 20:09:41 +02:00
Deepthi Gowri
6a1ce39599 FT: Add support for IEEE 802.11r with driver-based SME
Add NL80211_CMD_UPDATE_FT_IES to support update of FT IEs to the
WLAN driver. Add NL80211_CMD_FT_EVENT to send FT event from the
WLAN driver. This will carry the target AP's MAC address along
with the relevant Information Elements. This event is used to
report received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE).

Signed-off-by: Deepthi Gowri <deepthi@codeaurora.org>
2013-03-12 20:08:53 +02:00
Jouni Malinen
f46fc73a3f P2P: Add a peer entry based on Association Request frame
It is possible for a P2P client to connect to an operating group without
exchanging any Probe Request/Response frames that would allow the GO to
discover the peer. To make sure there is a P2P peer entry at the GO, try
to add the peer information based on P2P IE in (Re)Association Request
frame.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-12 13:04:33 +02:00
Vivek Natarajan
c9c77083b3 P2P: Clear p2p_in_provisioning flag on group removal
Commit 77dfafd07d cancels group formation
timeout on group removal case but failed to reset the
p2p_in_provisioning flag. This can lead to repeated p2p_find failures if
the group gets removed before completion of the WPS provisioning step
(e.g., GO tears down the group). Fix this by clearing
p2p_pin_provisioning when cancelling group formation.

Signed-hostap: Vivek Natarajan <nataraja@qca.qualcomm.com>
2013-03-11 20:47:24 +02:00
Chet Lanctot
9210bea172 Android: Enable IEEE 802.11w support in the build
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-11 13:52:13 +02:00
Chet Lanctot
3ee9ade6cf Allow SME SA Query to be used by all drivers
The unprotected disconnection events were previously processed only for
drivers that used the wpa_supplicant SME implementation (separate
authentication and association commands). However, this can be useful
for drivers that use the connect API, so remove the limitation and allow
the same IEEE 802.11w SA Query mechanism to be used even without full
use of the wpa_supplicant SME.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-11 13:49:40 +02:00
Jouni Malinen
5139008b51 Android: Sync makefile changes for HT/VHT overrides
CONFIG_HT_OVERRIDES and CONFIG_VHT_OVERRIDES were already mentioned in
android.config, but Android.mk did not yet know about them.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-10 18:05:40 +02:00
Johannes Berg
e9ee8dc394 wpa_supplicant: Support VHT capability overrides
Add support for VHT capability overrides to allow testing connections
with a subset of the VHT capabilities that are actually supported by
the device. The only thing that isn't currently supported (by mac80211
and this code) is the RX/TX highest rate field.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-03-10 18:04:39 +02:00
Johannes Berg
eae3a584f5 wpa_supplicant: Parse int values in different bases and reject invalid
Instead of using atoi(), use strtol() which allows checking if
the configuration values are valid integers and can understand
more than just decimal (also hexadecimal and octal). This not
only allows specifying some fields in hex (which can be useful)
but also rejecting invalid configurations, e.g.,
        disassoc_low_ack=27 * 2
which was previously read as just 27.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-03-10 17:55:24 +02:00
David Spinadel
725fc39e07 wpa_supplicant: Reschedule sched scan after network change
Stop sched scan, if running, after any disabling or removing of
a network, and request a new scan if needed.

Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-03-10 17:51:13 +02:00
Jouni Malinen
14f7907890 Remove unnecessary local variable
The ssid parameter (if NULL) can be used for the loop, too, to make the
code look a bit prettier.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-10 17:45:15 +02:00
David Spinadel
dca1a51149 wpa_supplicant: Handle enabling of one or all networks equally
Move enabling a network to a separate function. Try to reconnect if not
associated to an AP. Abort scheduled scan in any case of a new scan.

Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-03-10 17:43:00 +02:00
David Spinadel
7ed52f678b wpa_supplicant: Save prev_sched_ssid only if needed
If the whole ssid list was scanned, don't save the prev scheduled ssid
since we are going to start from beginning. Thos avoids starting sched
scan from prev_sched_ssid after scanning the full list, in case of
adding a network to ssid during scheduled scan.

Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-03-10 17:32:03 +02:00
David Spinadel
a09fc1ccf8 wpa_supplicant: Do not allow too short sched scan
In case that the ssid list is longer than max number of ssids,
ths scheduled scan aborted after timeout and rescheduled again
with shorter timeout and longer interval. In case that the timeout
is shorter than the interval, only one scan iteration will
be run. In this case, go back to the initial values.

Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-03-10 17:27:48 +02:00
Jouni Malinen
214a77b016 nl80211: Use helper function for phy_info_freqs()
This allows one level of indentation to be removed by using a helper
function to process each frequency.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-10 16:44:23 +02:00
Jouni Malinen
e62a1d43f9 nl80211: Split phy_info_band() into smaller helper functions
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-10 16:35:23 +02:00
Jouni Malinen
3cfcad1bb1 nl80211: Use helper function for phy_info_handler()
This allows one level of indentation to be removed by using a helper
function to process each wiphy band.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-10 16:17:18 +02:00
Jouni Malinen
5f43910727 nl80211: Split wiphy_info_handler() into smaller helper functions
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-10 16:05:55 +02:00
Dennis H Jensen
4324555222 nl80211: Support splitting wiphy information in dumps
This implements support for the new NL80211_ATTR_SPLIT_WIPHY_DUMP in
nl80211 to handle wiphy information that cannot fit in one message.

Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-hostap: Dennis H Jensen <dennis.h.jensen@siemens.com>
2013-03-10 13:22:43 +02:00
Jouni Malinen
3b365d4e9a Synchronize with wireless-testing.git include/uapi/linux/nl80211.h
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-10 13:06:31 +02:00
Jouni Malinen
bb0122f3e8 SAE: Add forgotten commit element validation step for FFC groups
The peer commit element needs to be validated to pass one of the steps
listed in IEEE 802.11, 11.3.5.4:
scalar-op(r, ELEMENT) = 1 modulo p

Similar step was present for ECC groups, but was missing for FFC groups.
This is needed to avoid dictionary attacks.

Thanks to Michael Roßberg and Sascha Grau for reporting this.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-10 11:45:55 +02:00
Jouni Malinen
0bb229a6e8 SAE: Move commit element validation steps into single location
It is clearer to keep all the validation steps described in IEEE 802.11
11.3.5.4 in a single location instead of splitting this between the
parsing and processing functions.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-10 11:26:22 +02:00
Jouni Malinen
89ffe06d68 tests: Do not hide error return when using run-all.sh
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 23:29:22 +02:00
Jouni Malinen
2a4291ffdc tests: Register test cases automatically from test_p2p_*.py
This removes need for editing run-p2p-tests.py whenever new test files
are added.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 23:19:59 +02:00
Jouni Malinen
823d572f99 tests: Add a script for running all the automated tests
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 21:40:31 +02:00
Jouni Malinen
07a2e61b43 tests: Use wlantest to validate TDLS behavior
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 19:01:56 +02:00
Jouni Malinen
e5774e1888 tests: Reset devices based on each test
Make sure the devices are in known state before starting each test case.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 19:00:57 +02:00
Jouni Malinen
7cb08cdbd6 tests: Add a test case for using TDLS in a P2P group
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 18:24:32 +02:00
Jouni Malinen
78ebbf0916 tests: Add autogo test with two clients
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 17:51:22 +02:00
Jouni Malinen
8b2b687eb8 tests: Start wlantest on hwsim0
This is in preparation for using wlantest to verify correct behavior in
various test cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 17:39:11 +02:00
Jouni Malinen
f3f8ee882f tests: Add support for separate P2P group interfaces
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 17:34:08 +02:00
Jouni Malinen
9e7308be40 tests: Reset device state at the end of full test run
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 16:34:20 +02:00
Jouni Malinen
4ea8d3b5cf tests: Add autonomous GO testing
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 16:30:25 +02:00
Jouni Malinen
dd34860dcd tests: Allow selected tests to be specified
Command line parameter to run-p2p-tests.py can now be used to select
which test case is run instead of always running all test cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 16:07:01 +02:00
Jouni Malinen
caf518a743 tests: Add GO Negotiation provisioning method validation
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 16:07:01 +02:00
Jouni Malinen
f7b1a75036 tests: Validate GO Negotiation status code
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 16:07:01 +02:00
Jouni Malinen
809079d3ea tests: GO Negotiation with both devices using GO intent 15
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 16:07:01 +02:00
Jouni Malinen
c68f9a61c6 tests: Report group formation results as a dict
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-09 16:07:01 +02:00
Jouni Malinen
a311c61dd6 tests: Add test execution mechanism
run-p2p-tests.py can now be used to run all P2P test cases. The
actual test cases are defined in test_p2p_*.py files.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-02 12:55:07 +02:00
Jouni Malinen
731e60f5c5 tests: Add start/stop scripts and configuration files
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-02 11:39:54 +02:00