Commit graph

4002 commits

Author SHA1 Message Date
Jouni Malinen
8329ad4d06 Fix wpa_config_get_all() error path
The previous version did not really work at all and it ended up crashing
if the os_strdup(field->name) call failed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-04 17:49:15 +03:00
Jouni Malinen
f7c04e50bd Interworking: Combine identical error returns into a single one
There is no need to maintain separate "return -1;" for each of the
wpa_config_set() calls that cannot really fail in practice.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Peng Xu
a6f5b1937a P2P: Allow P2P listen being offloaded to the driver/firmware
This allows P2P Listen to be offloaded to device to enhance power
saving.

To start P2P listen offload, from wpa_cli interface, issue the command:
	p2p_lo_start <freq> <period> <interval> <count>

To stop P2P listen offload, issue the command:
	p2p_lo_stop

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-07-03 22:36:58 +03:00
Roshan Pius
ef60f643ec Do not exceed scan ssid max size advertised by driver
Previously, wpa_set_scan_ssids() fully exhausted
wpa_driver_scan_params.ssid list when hidden network IDs are provided
via the control interface. This results in us exceeding the max size for
the list advertised by the driver when we add the "wildcard" scan SSID
entry. So, ensure that we leave space for one more scan SSID entry in
the list when we exit out of wpa_set_scan_ssids().

Signed-off-by: Roshan Pius <rpius@google.com>
2016-07-03 19:13:42 +03:00
Jouni Malinen
653d227e9f MBO: Improve supported operating class generation
Previously, 2.4 GHz operating class 81 was not added for US due to not
all of the channels (1-13 in this operating class) being supported.
Still, this operating class is the main operating class in the global
table for 2.4 GHz and it is the only option for indicating support for
the 2.4 GHz band channels in US.

Change the supported operating class building rules to include all
operating classes for which at least one channel is enabled. In
addition, fix the 80, 80+80, and 160 MHz channel checks (checking the
center frequency channel was failing since it is not a valid 20 MHz
channel).

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-01 01:13:54 +03:00
Jouni Malinen
8bd90996f9 mesh: Add debug prints on my/peer lid mismatches
This makes it easier to figure out why a received mesh peering frame
could end up getting dropped.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-29 01:22:13 +03:00
Jouni Malinen
78ac368574 mesh: Add MPM FSM transitions from ESTAB to HOLDING for {OPN,CNF}_RJCT
These events were missing from the MPM FSM state transition table.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-28 23:30:40 +03:00
Jouni Malinen
02022564a0 mesh: Update MPM FSM events to match the standard
{OPN,CNF,CLS}_IGNR events were removed during P802.11s draft development
process. Replace these with not generating a MPM FSM event. In addition,
add the standard REQ_RJCT event and option to pass in a specific reason
code to mesh_mpm_fsm().

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-28 23:20:39 +03:00
Jouni Malinen
d02e549831 mesh: Rename MPM FSM states to match the standard
During the P802.11s draft development, there were separate LISTEN and
IDLE states. However, the current IEEE 802.11 standards uses only the
IDLE state while the implementation called this LISTEN. Rename the state
in the implementation to match the one used in the standard to avoid
confusion. In addition, rename OPEN_{SENT,RCVD} to OPN_{SNT,RCVD} to
match the exact spelling of these states in the standard.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-28 22:53:05 +03:00
Jouni Malinen
1f2f3f1c4a mesh: Indicate OPN_RJCT event if AES-SIV decrypt fails
REVmc/D6.0 14.5.5.2.2 (Processing Mesh Peering Open frames for AMPE)
mandates the OPN_RJCT event to be invoked if AES-SIV decryption for
received Mesh Peering Open frame fails. This allows a Mesh Peering Close
frame to be sent in such a case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-28 22:45:41 +03:00
Jouni Malinen
e8afaad7fd mesh: Write close reason from Mesh Peering Close to debug log
This makes it a bit easier to understand the debug log entries related
to tearing down a mesh connection.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-28 22:44:28 +03:00
Jouni Malinen
ee0ad453d5 mesh: Remove GTKdata and IGTKdata from Mesh Peering Confirm/Close
These optional fields are supposed to be included in the Authenticated
Mesh Peering Exchange element only in Mesh Peering Open frames.
Previously, these were incorrectly included in Mesh Peering
Confirm/Close frames and also required to be present in all these
frames.

While this commit changes the receive processing to ignore the
unexpected extra fields, it should be noted that the previous
implementation required the fields to be present and as such, the fixed
implementation is not compatible with it for secure mesh.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-28 22:23:42 +03:00
Jouni Malinen
37fd0be2d3 Add CTRL-EVENT-CHANNEL-SWITCH event to indicate channel changes
This provides information of the channel switch to wpa_supplicant
control interface monitors.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-27 21:10:35 +03:00
Jouni Malinen
1574fa1c6c GAS: Fix double-free on an error path
If radio_add_work() fails, gas_query_req() ended up freeing the query
payload and returning an error. This resulted in also the caller trying
to free the query payload. Fix this by not freeing the buffer within
gas_query_req() in error case to be consistent with the other error
cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-27 18:34:39 +03:00
Jouni Malinen
d6e93d3e09 GAS: Remove unused gas_query_cancel()
This function was added with the initial GAS implementation, but there
was no user for it at the time and no clear use now either, so remove
the unused function and the related GAS query reason code.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-27 18:34:38 +03:00
Jouni Malinen
ae2b4827cc GAS: Check protected/unprotected drop after action code check
Apply the GAS specific rule of using Protected Dual of Public Action
frame only after having checked that the action code indicates this to
be a GAS response. Previously, non-GAS Public Action frames could have
been incorrectly dropped because of this check if received during an
association with PMF enabled.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-27 18:32:26 +03:00
Jouni Malinen
9c21b2bf45 GAS: Report GAS-QUERY-DONE event on initial req TX failure
The GAS-QUERY-DONE event with result=INTERNAL_ERROR was reported on most
other error cases, but the failure triggered by not being able to
transmit a GAS Initial Request stopped the query silently. Make this
more consistent with other error cases by reporting the same event.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-27 16:30:08 +03:00
Jouni Malinen
fc1e2c0d91 D-Bus: Make the CurrentAuthMode property getter more robust
Now that mesh sets wpa_s->wpa_state = WPA_COMPLETED, it looks like this
getter can get called with wpa_s->current_ssid = NULL. That could result
in NULL pointer dereference, so need to protect that specific case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-24 23:49:08 +03:00
Nishant Chaprana
82b9ec3125 D-Bus: Add DeviceFoundProperties signal for discovered peers
This signal sends the peer properties to applications for discovered
peers. The signature of this event is "oa{sv}". This event is needed
because the current DeviceFound signal provides only the peer object
path. If there are many peers in range there will be many DeviceFound
signals and for each DeviceFound signal, applications would need to use
GetAll to fetch peer properties. Doing this many times would create
extra load over application as well as over wpa_supplicant, so it is
better to send peer properties in the event so that applications can
extract found peer information without extra steps.

The existing DeviceFound signal is left as-is to avoid changing its
signature.

The issue is not applicable to the control interface because the
P2P-DEVICE-FOUND event includes peer info in it, but over D-Bus
interface DeviceFound provides only the peer object.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2016-06-24 19:02:58 +03:00
Maital Hahn
4976618c76 mesh: Mark wpa_state COMPLETED when mesh join has been performed
In mesh interface, the wpa_supplicant state was either
DISCONNECT/SCANNING in non-secured connection or AUTHENTICATING in
secured connection. The latter prevented the scan. Update the
wpa_supplicant state in mesh to be COMPLETED upon initialization. This
is similar to the P2P GO case.

Signed-off-by: Maital Hahn <maitalm@ti.com>
2016-06-24 19:02:58 +03:00
Lior David
b94fff1d93 wpa_supplicant: Configurable EAP fragment size in AP mode
In wpa_supplicant AP mode, allow configuration of the EAP fragment size
using the fragment_size member of network block (wpa_ssid), similar to
the fragment_size in hostapd configuration. bss->fragment_size default
value of 0 is treated specially in some EAP code paths (such as MTU
initialization in eap_pwd_init). In order to preserve the existing
behavior, bss->fragment_size will only be set if the network block
specified a value different from the default which is
DEFAULT_FRAGMENT_SIZE(1398) bytes.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
2016-06-24 19:02:58 +03:00
Jouni Malinen
ce256b4a49 PAE: Use sci->port more consistently
This is now annotated as be16, so use it as such in all cases instead of
first storing host byte order value and then swapping that to big endian
in other instances of the same structure. This gets rid of number of
sparse warnings.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-24 19:02:58 +03:00
Jouni Malinen
affdd33591 Move extern declarations for autoscan modules into a header file
This gets rid of number of sparse warnings and also allows the
compatibility of the declarations to be verified.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-24 19:02:58 +03:00
Jouni Malinen
9eece21357 Move extern declarations for bgscan modules into a header file
This gets rid of number of sparse warnings and also allows the
compatibility of the declarations to be verified.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-24 19:02:58 +03:00
Jouni Malinen
50a17a76e1 tests: Declare module test functions in a header file
This gets rid of number of warnings from sparse.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-23 18:26:09 +03:00
Jouni Malinen
0dbe22be3d Mark wpas_data_test_rx() static
This is not called from outside ctrl_iface.c.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-23 13:43:20 +03:00
Jouni Malinen
4d8d710f0b Fix byte order for CONFIG_VHT_OVERRIDES parameters
The VHT parameters were not swapped properly on big endian systems.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-23 13:41:18 +03:00
Jouni Malinen
39cdd3a0f9 FST: Mark wpa_supplicant callback functions get_peer_{first,next} static
These are used only through function pointers, so no need to keep the
functions non-static.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-23 13:32:29 +03:00
Jouni Malinen
6013bbe04f TDLS: Declare tdls_testing as extern in a header file
This gets rid of a sparse warning with CONFIG_TDLS_TESTING builds.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-23 13:31:04 +03:00
Jouni Malinen
0e672b89e7 trace: Define externs in a header file
This gets rid of some unnecessary strace warnings from test builds.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-23 13:28:54 +03:00
Jouni Malinen
0558bec1fd MBO: Mark verify_channel() static
This function is not used outside mbo.c.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-23 13:13:54 +03:00
Jouni Malinen
9e080bf343 WNM: Use NULL instead of 0 as the pointer return value
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-23 13:11:01 +03:00
Jonathan Afek
3b208346ec ctrl_iface: BSS command to skip info items if parsing fails
In some cases parsing of the mesh scan info for a BSS or the P2P scan
info can fail. One reason can be that the Beacon/Probe Response frame
contained malformed length vendor IEs which are not parsed when adding
to the BSS table. Instead of skipping the whole BSS of the BSS command,
just skip the part that failed to parse.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-19 23:48:07 +03:00
Masashi Honma
5a8e48fdb3 mesh: Use MESH_CAP_* macros for mesh capability
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-06-19 20:18:09 +03:00
Masashi Honma
d70a8ab1e3 mesh: Ignore crowded peer
The "Accepting Additional Mesh Peerings bit == 0" means the peer cannot
accept any more peers, so suppress attempt to open a connection to such
a peer.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-06-19 20:18:09 +03:00
Jouni Malinen
a151b0e37d mesh: Select pairwise and group cipher based on network profile
This allows the previously hardcoded CCMP cipher to be replaced in the
network profile for mesh.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-19 20:18:09 +03:00
Jouni Malinen
3b6deac0e7 mesh: Avoid use of hardcoded cipher
This moves pairwise, group, and management group ciphers to various mesh
data structures to avoid having to hardcode cipher in number of places
through the code. While CCMP and BIP are still the hardcoded ciphers,
these are now set only in one location.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-19 20:18:09 +03:00
Jouni Malinen
f868d5607d mesh: Clean up AMPE element encoding and parsing
The AMPE element includes number of optional and variable length fields
and those cannot really be represented by a fixed struct
ieee80211_ampe_ie. Remove the optional fields from the struct and
build/parse these fields separately.

This is also adding support for IGTKdata that was completely missing
from the previous implementation. In addition, Key RSC for MGTK is now
filled in and used when configuring the RX MGTK for a peer.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-19 20:18:09 +03:00
Jouni Malinen
4367eec439 mesh: Do not use RX MGTK as RX IGTK
The previous implementation was incorrect in forcing the MGTK to be used
as the IGTK as well. Define new variable for storing IGTK and use that,
if set, to configure IGTK to the driver. This commit does not yet fix
AMPE element parsing to fill in this information.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-19 20:18:09 +03:00
Jouni Malinen
a4eec3c230 mesh: Use variable length MGTK for RX
This extends the data structures to allow variable length MGTK to be
stored for RX. This is needed as an initial step towards supporting
different cipher suites.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-19 20:18:09 +03:00
Jouni Malinen
fccba2c946 mesh: Generate a separate TX IGTK if PMF is enabled
Previous implementation was incorrectly using MGTK also as the IGTK and
doing this regardless of whether PMF was enabled. IGTK needs to be a
independent key and this commit does that at the local TX side.

The current AMPE element construction and parsing is quite broken, so
this does not get add the IGTKdata field there.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-19 20:18:09 +03:00
Jouni Malinen
696f792320 mesh: Support variable length TX MGTK
This is an initial step in supporting multiple cipher suites.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-19 20:18:09 +03:00
Jouni Malinen
b02f4d058c mesh: Add variable length MTK support
This is needed as a part in enabling support for different pairwise
ciphers in mesh.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-19 20:18:09 +03:00
Jouni Malinen
846201dff7 mesh: Coding style cleanup for MTK derivation
Clean up the mesh_rsn_derive_mtk() function by using proper macros and
pointer to the location within the context block.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-19 20:18:02 +03:00
Jouni Malinen
0f76d8249c mesh: Fix MTK derivation to use AKM suite selector
mesh_rsn_derive_mtk() was hardcoded to use GCMP (even though CCMP was
hardcoded elsewhere) cipher suite selector instead of the selected AKM
suite selector. This resulted in incorrect MTK getting derived. Fix this
by used the SAE AKM suite selector in the input to the KDF.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-18 15:53:26 +03:00
Jouni Malinen
f5ba6923d0 mesh: Coding style cleanup for AEK derivation
Clean up the mesh_rsn_derive_aek() function by using proper macros and
pointer to the location within the context block.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-18 15:53:22 +03:00
Jouni Malinen
a59c5e9235 mesh: Fix AEK derivation to use AKM suite selector
mesh_rsn_derive_aek() was hardcoded to use GCMP (even though CCMP was
hardcoded elsewhere) cipher suite selector instead of the selected AKM
suite selector. This resulted in incorrect AEK getting derived. Fix this
by used the SAE AKM suite selector in the input to the KDF.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-18 15:53:22 +03:00
Jouni Malinen
18aca1a07d mesh: Use ieee80211w profile parameter
This is initial step in fixing issues in how PMF configuration for RSN
mesh was handled. PMF is an optional capability for mesh and it needs to
be configured consistently in both hostapd structures (to get proper
RSNE) and key configuration (not included in this commit).

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-18 15:52:54 +03:00
Jouni Malinen
b8b499e4a4 mesh: Use WPA_NONCE_LEN macro
No need to use the magic value 32 here since there is a generic define
for the RSN-related nonce values.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-18 15:52:54 +03:00
vamsi krishna
00ec535060 WPS: Fix memory leak with wps_ie in wpa_bss_is_wps_candidate()
Fix possible memory leak in case if WPS is not enabled on the interface
for connection. This path was missed in commit
fae7b37260 ('WPS: Do not expire probable
BSSes for WPS connection').

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-17 12:39:14 +03:00
vamsi krishna
fae7b37260 WPS: Do not expire probable BSSes for WPS connection
When the BSS count reaches max_bss_count, the oldest BSS will be removed
in order to accommodate a new BSS. Exclude WPS enabled BSSes when going
through a WPS connection so that a possible WPS candidate will not be
lost.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-17 00:01:08 +03:00
David Woodhouse
f7cb6e9f24 Update PKCS#11 references in template wpa_supplicant.conf
Ditch the legacy syntax and manual engine mangling and just give an
example using simple PKCS#11 URIs that'll work with both GnuTLS and
OpenSSL.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2016-06-11 12:21:47 +03:00
Jouni Malinen
c86bef2913 wpa_supplicant: Make GAS Address3 field selection behavior configurable
IEEE Std 802.11-2012, 10.19 (Public Action frame addressing) specifies
that the wildcard BSSID value is used in Public Action frames that are
transmitted to a STA that is not a member of the same BSS.
wpa_supplicant used to use the actual BSSID value for all such frames
regardless of whether the destination STA is a member of the BSS.

P2P does not follow this rule, so P2P Public Action frame construction
must not be changed. However, the cases using GAS/ANQP for non-P2P
purposes should follow the standard requirements.

Unfortunately, there are deployed AP implementations that do not reply
to a GAS request sent using the wildcard BSSID value. The previously
used behavior (Address3 = AP BSSID even when not associated) continues
to be the default, but the IEEE 802.11 standard compliant addressing
behavior can now be configured with gas_address3=1.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-10 21:44:49 +03:00
Jouni Malinen
ee854ff679 mesh: Remove extra newline from the end of an error message
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 22:00:30 +03:00
Jouni Malinen
331f07742f mesh: Allow 160 MHz channel to be configured
This allows minimal testing with 160 MHz channel with country code ZA
that happens to be the only one with a non-DFS 160 MHz frequency. DFS
with mesh is not yet supported.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 21:30:51 +03:00
Jouni Malinen
d2cc8bbbf6 mesh: Remove unreachable code
ssid->frequency cannot be 0 in wpa_supplicant_mesh_init() since
wpas_supplicant_join_mesh() rejects such a configuration.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 20:59:25 +03:00
Kanchanapally, Vidyullatha
cc9a2575ca nl80211: Use extended capabilities per interface type
This adds the necessary changes to support extraction and use of the
extended capabilities specified per interface type (a recent
cfg80211/nl80211 extension). If that information is available,
per-interface values will be used to override the global per-radio
value.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-31 21:35:54 +03:00
Jouni Malinen
9a5160f5fb Report connection timeouts in CTRL-EVENT-ASSOC-REJECT
Add a new "timeout" argument to the event message if the nl80211 message
indicates that the connection failure is not due to an explicit AP
rejection message. This makes it easier for external programs to figure
out why the connection failed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-31 00:11:42 +03:00
Jouni Malinen
b4c738ec86 mesh: Fix error path handling for RSN (MGTK init)
wpa_deinit() got called twice if the random_get_bytes() fails to
generate the MGTK. This resulted in double-freeing the rsn->auth
pointer. Fix this by allowing mesh_rsn_auth_init() handle freeing for
all error cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-30 20:15:16 +03:00
Jouni Malinen
f4b4ddfdd9 D-Bus: Remove unused wpas_dbus_signal_p2p_group_started() parameter
The ssid pointer was not used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-30 17:56:41 +03:00
Nishant Chaprana
4fe50bbc8e D-Bus: Indicate whether created group is persistent or not
This adds an extra parameter in GroupStarted signal to indicate whether
the created group is Persistent or not. It is similar to the
[PERSISTENT] tag which comes in P2P-GROUP-STARTED over the control
interface.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2016-05-30 17:56:16 +03:00
Jouni Malinen
62fc8e6a40 mesh: Fix MESH_INTERFACE_ADD error path cleanup
If wpa_supplicant_add_iface() fails, we need to remove the added netdev,
not the existing wpa_s instance.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-30 01:49:22 +03:00
Jouni Malinen
7012e2589f Remove dead code from wpas_sched_scan_plans_set()
scan_plan->interval was checked against 0 twice; the latter case cannot
happen.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-28 22:54:00 +03:00
Jouni Malinen
8e909fa92e Improve reattach scan OOM failure handling
Instead of reporting the memory allocation failure and stopping, run the
scan even if the frequency list cannot be created due to allocation
failure. This allows the wpa_s->reattach flag to be cleared and the scan
to be completed even if it takes a bit longer time due to all channels
getting scanned.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-28 22:47:31 +03:00
Jouni Malinen
f37d8a4da4 Indicate scan failure event on parameter cloning failure
This is more consistent with the radio_add_work() error case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-28 22:36:52 +03:00
Jörg Krause
8960afa4bf wpa_cli: Run action file in case of an AP event
Run the action script in case of AP events "AP-ENABLED" and
"AP-DISABLED".

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
2016-05-23 21:22:36 +03:00
Jouni Malinen
6dc3206ef0 scan: Fix a memory leak on an error path
If preassoc_mac_addr is used and updating the MAC address fails in
wpas_trigger_scan_cb(), the cloned scan parameters were leaked. Fix that
and also send a CTRL-EVENT-SCAN-FAILED event in this and another error
case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-23 18:29:55 +03:00
Jouni Malinen
88802405f3 scan: Clean up code a bit - phase1 is used in all WPS cases
There is no need to have a separate if statement to skip the cases where
phase1 is not set. Just check it with the strstr comparison since this
case is not really used in practice.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-22 17:44:28 +03:00
Jouni Malinen
e1ae2876d5 scan: Clean up code a bit - ssid cannot be NULL here
wpa_s->current_ssid is set to a non-NULL ssid pointer value here, so
there is no need for the extra if statement.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-22 16:23:28 +03:00
Jouni Malinen
a1703947b1 Update ChangeLog files for v2.6
This adds a summary of changes since the v2.5 release.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-21 20:26:56 +03:00
Lior David
a26c9c2e71 Fix sending non-Public Action frames over P2P Device interface
The P2P Device interface can only send Public Action frames. Non-Public
Action frames must be sent over a group interface. The previous
implementation sometimes tried to send non-Public Action frames such as
GO Discoverability over the P2P Device interface, however, the source
address of the frame was set to the group interface address so the code
in offchannel.c knew to select the correct interface for the TX.

The check breaks when the P2P Device and group interfaces have the same
MAC address. In this case the frame will be sent over the P2P Device
interface and the send will fail.

Fix this problem in two places:
1. In offchannel, route non-Public Action frames to the GO
   interface when the above conditions are met.
2. When a TX_STATUS event arrives on such routed frame, it will
   arrive on the GO interface but it must be handled by the P2P Device
   interface since it has the relevant state logic.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
2016-05-21 00:17:45 +03:00
Purushottam Kushwaha
31d7fb14af P2PS: Allow P2P_CONNECT command for P2PS connection with/without PIN
This allows using P2PS config method with or without PIN for connection.
wpa_supplicant should internally handle the default PIN "12345670" and
shall also allow connection irrespective of PIN used in P2P_CONNECT.

For example,
 1. P2P_CONNECT 02:2a:fb:22:22:33 p2ps
 2. P2P_CONNECT 02:2a:fb:22:22:33 xxxxxxxx p2ps
Where the second one is maintained for backwards compatibility.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-19 19:16:26 +03:00
Jouni Malinen
7d1007a674 Fix external radio work debug printing on removal
work->type was pointing to the allocated work->ctx buffer and the debug
print in radio_work_free() ended up using freed memory if a started
external radio work was removed as part of FLUSH command operations. Fix
this by updating work->type to point to a constant string in case the
dynamic version gets freed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-16 19:04:54 +03:00
Lior David
b6317b417f wpa_supplicant: Add wps_disabled parameter to network block
Add a new parameter wps_disabled to network block (wpa_ssid). This
parameter allows WPS functionality to be disabled in AP mode.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
2016-05-14 19:43:30 +03:00
Jouni Malinen
23d71a0286 Set wpa_psk_set in wpa_supplicant AP mode is PSK is available
While this is unlikely to make any practical difference, it is better to
keep consistent with hostapd configuration parser.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-14 19:43:30 +03:00
Jouni Malinen
6641954321 Fix AP mode key_mgmt configuration in wpa_supplicant default case
If the network profile key_mgmt parameter was not set, wpa_supplicant
defaulted to enabling both WPA-PSK and WPA-EAP. This is not correct for
AP mode operations, so remove WPA-EAP in such a case to fix WPA-PSK
without explicit key_mgmt parameter.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-14 19:43:30 +03:00
Jouni Malinen
ad6cee3fa0 P2P: Do not enable P2P group processing for non-P2P AP mode
wpa_supplicant was starting P2P group processing for all AP mode
interfaces in CONFIG_P2P=y builds. This is unnecessary and such
operations should be enabled only for actual GO interfaces.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-14 19:43:30 +03:00
Ilan Peer
3b11ad34eb Send CTRL-EVENT-REGDOM-CHANGE event on the parent interface
The NL80211_CMD_WIPHY_REG_CHANGE can be handled by any of the
interfaces that are currently controlled by the wpa_supplicant.
However, some applications expect the REGDOM_CHANGE event to be
sent on the control interface of the initially added interface
(and do not expect the event on any of child interfaces).

To resolve this, when processing NL80211_CMD_WIPHY_REG_CHANGE,
find the highest parent in the chain, and use its control interface
to emit the CTRL-EVENT-REGDOM-CHANGE event.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-05-14 17:19:02 +03:00
Jouni Malinen
4de70e2330 Add MGMT_RX_PROCESS test command for wpa_supplicant
This makes it easier to write hwsim test cases to verify management
frame processing sequences with dropped or modified frames. When
ext_mgmt_frame_handling is used, this new command can be used to request
wpa_supplicant to process a received a management frame, e.g., based on
information reported in the MGMT-RX events.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-13 20:54:51 +03:00
Peter Oh
f42c3ceb94 mesh: Calculate MTK before sending it to MAC in case Open is dropped
IEEE Std 802.11-2012 13.5.6.3 State transitions require an action
sending SETKEYS primitive to MAC when OPN_ACPT event occurs in CNF_RCVD
state in case of AMPE is used, but since MTK calculation is missed in
this condition, all zero valued key are passed to MAC and cause unicast
packet decryption error. This could happen if the first transmission of
plink Open frame is dropped and Confirm frame is processed first
followed by retransmitted Open frame.

Fix this by calculating the MTK also in this sequence of unexpected
messages.

Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
2016-05-13 20:54:51 +03:00
Peter Oh
baa1213649 mesh: Add missing action to cancel timer
IEEE Std 802.11-2012 Table 13-2, MPM finite state machine requires to
clear retryTimer when CNF_ACPT event occurs in OPN_SNT state which is
missing, so add it to comply with the standard.

This was found while debugging an MTK issue and this commit fixes a
potential issue that mesh sends invalid event (PLINK_OPEN) which will
lead another invalid timer register such as MeshConfirm Timer. This
behaviour might lead to undefined mesh state.

Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
2016-05-13 19:57:15 +03:00
Saurav Babu
e8a1b6b8e9 D-Bus: Check driver capability for IBSS in Modes property of Capabilities
Instead of hardcoding "ad-hoc" in the array of supported capabilities,
add this only if the driver indicates support for IBSS.

Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2016-05-13 18:53:04 +03:00
Johannes Berg
3dd0e9e4e4 wpa_supplicant: Fix CONFIG_AP build without CTRL_IFACE
wpas_ap_pmksa_cache_list() and wpas_ap_pmksa_cache_flush() should be
under the #ifdef since they're only called for the control iface and
use functionality that otherwise isn't available.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-05-13 18:31:01 +03:00
Sunil Dutt
03626e9157 Skip connection attempt for non-RSN networks if PMF is set to required
Since ieee80211w=2 is an explicit configuration to wpa_supplicant, the
connection attempt for such non-PMF (non-RSN) capable networks should be
skipped.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-05 21:09:08 +03:00
Jouni Malinen
22950049e4 Ignore pmf=1/2 parameter for non-RSN networks
PMF is available only with RSN and pmf=2 could have prevented open
network connections. Change the global wpa_supplicant pmf parameter to
be interpreted as applying only to RSN cases to allow it to be used with
open networks.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-05 21:09:08 +03:00
Jouni Malinen
2a3f56502b Reject SET commands with newline characters in the string values
Many of the global configuration parameters are written as strings
without filtering and if there is an embedded newline character in the
value, unexpected configuration file data might be written.

This fixes an issue where wpa_supplicant could have updated the
configuration file global parameter with arbitrary data from the control
interface or D-Bus interface. While those interfaces are supposed to be
accessible only for trusted users/applications, it may be possible that
an untrusted user has access to a management software component that
does not validate the value of a parameter before passing it to
wpa_supplicant.

This could allow such an untrusted user to inject almost arbitrary data
into the configuration file. Such configuration file could result in
wpa_supplicant trying to load a library (e.g., opensc_engine_path,
pkcs11_engine_path, pkcs11_module_path, load_dynamic_eap) from user
controlled location when starting again. This would allow code from that
library to be executed under the wpa_supplicant process privileges.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-02 11:08:25 +03:00
Jouni Malinen
b166cd84a7 Reject SET_CRED commands with newline characters in the string values
Most of the cred block parameters are written as strings without
filtering and if there is an embedded newline character in the value,
unexpected configuration file data might be written.

This fixes an issue where wpa_supplicant could have updated the
configuration file cred parameter with arbitrary data from the control
interface or D-Bus interface. While those interfaces are supposed to be
accessible only for trusted users/applications, it may be possible that
an untrusted user has access to a management software component that
does not validate the credential value before passing it to
wpa_supplicant.

This could allow such an untrusted user to inject almost arbitrary data
into the configuration file. Such configuration file could result in
wpa_supplicant trying to load a library (e.g., opensc_engine_path,
pkcs11_engine_path, pkcs11_module_path, load_dynamic_eap) from user
controlled location when starting again. This would allow code from that
library to be executed under the wpa_supplicant process privileges.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-02 11:08:25 +03:00
Paul Stewart
0fe5a23424 Remove newlines from wpa_supplicant config network output
Spurious newlines output while writing the config file can corrupt the
wpa_supplicant configuration. Avoid writing these for the network block
parameters. This is a generic filter that cover cases that may not have
been explicitly addressed with a more specific commit to avoid control
characters in the psk parameter.

Signed-off-by: Paul Stewart <pstew@google.com>
2016-05-02 11:08:25 +03:00
Jouni Malinen
73e4abb24a Reject psk parameter set with invalid passphrase character
WPA/WPA2-Personal passphrase is not allowed to include control
characters. Reject a passphrase configuration attempt if that passphrase
includes an invalid passphrase.

This fixes an issue where wpa_supplicant could have updated the
configuration file psk parameter with arbitrary data from the control
interface or D-Bus interface. While those interfaces are supposed to be
accessible only for trusted users/applications, it may be possible that
an untrusted user has access to a management software component that
does not validate the passphrase value before passing it to
wpa_supplicant.

This could allow such an untrusted user to inject up to 63 characters of
almost arbitrary data into the configuration file. Such configuration
file could result in wpa_supplicant trying to load a library (e.g.,
opensc_engine_path, pkcs11_engine_path, pkcs11_module_path,
load_dynamic_eap) from user controlled location when starting again.
This would allow code from that library to be executed under the
wpa_supplicant process privileges.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-02 11:08:25 +03:00
Dmitry Shmidt
df5bde83da Android: Remove EAP-FAST option
Current BoringSSL version is not suitable for EAP-FAST.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2016-04-28 20:43:43 +03:00
Andrei Otcheretianski
9b377be037 P2P: Copy config from p2pdev when not using dedicated group interface
When the P2P Device interface is used and an existing interface is used
for P2P GO/Client, the P2P Device configuration was not cloned to the
configuration of the existing interface. Thus, configuration parameters
such as idle_group_time, etc., were not propagated to the P2P GO/Client
interface.

Handle this by copying all configuration parameters of the P2P device
interface to the reused interface, with the following exceptions:

1. Copy the NFC key data only if it was not set in the configuration
   file.
2. The WPS string fields are set only if they were not previously set
   in the configuration of the destination interface (based on the
   assumption that these fields should be identical among all
   interfaces).

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2016-04-25 00:10:49 +03:00
Andrei Otcheretianski
3c88d26941 P2P: Fix wpas_p2p_nfc_auth_join()
Use the p2pdev pointer instead of the parent pointer to comply with the
flows when a dedicated P2P Device interface is used and
p2p_no_group_iface == 1 (in which case the parent of the reused
interface isn't necessary the same as p2pdev).

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2016-04-25 00:10:10 +03:00
Kanchanapally, Vidyullatha
2f195639ec WNM: Fetch scan results before checking transition candidates
On receiving a WNM BSS Transition Management Request frame with a
candidate list, fetch the latest scan results from the kernel to see if
there are any recent scan results for the candidates and initiate a
connection if found. This helps to avoid triggering a new scan in cases
where a scan initiated by something else (e.g., an internal beacon
measurement report functionality in a driver) has processed Beacon or
Probe Response frames without wpa_supplicant having received a
notification of such an update yet.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-04-23 17:12:16 +03:00
Marcin Niestroj
9e5a5de55a systemd: Update service files according to D-Bus interface version
systemd service files were supplied with old D-Bus bus name. After
service activation systemd was waiting for appearance of specified bus
name to consider it started successfully. However, if wpa_supplicant was
compiled only with the new D-Bus interface name, systemd didn't notice
configured (old) D-Bus bus name appearance. In the end, service was
considered malfunctioning and it was deactivated.

Update systemd service BusName property according to supported D-Bus
interface version.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
2016-04-19 00:55:17 +03:00
Purushottam Kushwaha
57b38882e5 P2P: Add P2P_GROUP_MEMBER command to fetch client interface address
This allows local GO to fetch the P2P Interface Address of a P2P Client
in the group based on the P2P Device Address for the client. This
command should be sent only on a group interface (the same peer may be
in multiple concurrent groups).

Usage:
P2P_GROUP_MEMBER <P2P Device Address>

Output:
<P2P Interface Address>

Signed-off-by: Purushottam Kushwaha <pkushwah@qti.qualcomm.com>
2016-04-19 00:41:16 +03:00
Lior David
0ee8925098 P2P: Trigger event when invitation is accepted
Trigger an event when wpa_supplicant accepts an invitation to re-invoke
a persistent group. Previously wpa_supplicant entered group formation
without triggering any specific events and it could confuse clients,
especially when operating with a driver that does not support
concurrency between P2P and infrastructure connection.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
2016-04-18 16:57:05 +03:00
Ilan Peer
cf667c66ac RRM: Modify the processing of a received neighbor report
Parse a received neighbor report and report for each neighbor report the
data received for it:

RRM-NEIGHBOR-REP-RECEIVED bssid=<BSSID> info=0x<hex> op_class=<class> chan=<chan> [lci=hex] [civic=hex]

Note that this modifies the previous format that originally reported
only the length of the received frame.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-04-17 17:45:14 +03:00
Beni Lev
00ed0aa2dd SME: Add support for global RRM flag
Add RRM to SME authentication/association if the global RRM flag is set.

Signed-off-by: Beni Lev <beni.lev@intel.com>
2016-04-17 12:43:57 +03:00
David Spinadel
4a742011ab wpa_supplicant: Handle LCI request
Handle radio measurement request that contains LCI request. Send
measurement report based on a configurable LCI report element. The LCI
report element is configured over the control interface with

SET lci <hexdump of the element>

and cleared with

SET lci ""

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-17 12:29:12 +03:00
David Spinadel
2572df34b2 hostapd: Handle Neighbor Report Request frame
Process Neighbor Report Request frame and send Neighbor Report Response
frame based on the configured neighbor report data.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-17 12:29:07 +03:00
David Spinadel
9b4b226426 hostapd: Add a database of neighboring APs
Add a configurable neighbor database that includes the content of
Nighbor Report element, LCI and Location Civic subelements and SSID.

All parameters for a neighbor must be updated at once; Neighbor Report
element and SSID are mandatory, LCI and civic are optional. The age of
LCI is set to the time of neighbor update.

The control interface API is:
SET_NEIGHBOR <BSSID> <ssid=SSID> <nr=data> [lci=<data>] [civic=<data>]

To delete a neighbor use:
REMOVE_NEIGHBOR <BSSID> <SSID>

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-16 21:05:40 +03:00
Jouni Malinen
6a4f0ed788 Fix spelling of "neighbor" in a function name
The missing letter 'h' made it more difficult to find this function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-16 21:05:39 +03:00
David Spinadel
d41a5352fe wpa_supplicant: Add LCI and civic request to Neighbor Report Request
Add an option to request LCI and Location Civic Measurement in Neighbor
Report Request frame, as described in IEEE P802.11-REVmc/D5.0, 9.6.7.6.

Note: This changes the encoding format of the NEIGHBOR_REP_REQUEST
ssid=<val> parameter. This used to be parsed as raw SSID data which is
problematic for accepting additional parameters. The new encoding allows
either a string within double-quotation marks or a hexdump of the raw
SSID.

Thew new format:
NEIGHBOR_REP_REQUEST [ssid=<SSID>] [lci] [civic]

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-16 21:05:39 +03:00
David Spinadel
624b8a061f utils: Add ssid_parse() function
Add a function that parses SSID in text or hex format. In case of the
text format, the SSID is enclosed in double quotes. In case of the hex
format, the SSID must include only hex digits and not be enclosed in
double quotes. The input string may include other arguments after the
SSID.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-16 21:05:37 +03:00
David Spinadel
9d955f751e utils: Rename hostapd_parse_bin to wpabuf_parse_bin and move it
Make the function available as part of the wpabuf API.
Use this renamed function where possible.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-09 11:23:36 +03:00
Jouni Malinen
61c101186a Extend VENDOR_ELEM parameters to cover non-P2P Probe Request frame
The new VENDOR_ELEM value 14 can now be used to add a vendor element
into Probe Request frames used by non-P2P active scans.

For example:
VENDOR_ELEM_ADD 14 dd05001122330a
and to clear that:
VENDOR_ELEM_REMOVE 14 *

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-09 00:30:49 +03:00
Matti Gottlieb
ece4ac5f4e HS 2.0: Add support for configuring frame filters
When a station starts an association to a Hotspot 2.0 network, request
the driver to do the following, based on the BSS capabilities:

1. Enable gratuitous ARP filtering
2. Enable unsolicited Neighbor Advertisement filtering
3. Enable unicast IP packet encrypted with GTK filtering if
   DGAF disabled bit is zero

Clear the filter configuration when the station interface is
disassociated.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
2016-04-08 15:21:18 +03:00
Matti Gottlieb
e42adb9a75 driver: Add a packet filtering function declaration
Add a new function declaration that will allow wpa_supplicant to request
the driver to configure data frame filters for specific cases.

Add definitions that will allow frame filtering for stations as
required by Hotspot 2.0:

1. Gratuitous ARP
2. Unsolicited NA
3. Unicast IP packets encrypted with GTK

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
2016-04-08 13:13:55 +03:00
Lior David
90f14962ec wpa_supplicant: "don't care" value for pbss in ssid structure
Add a new value 2 to the pbss parameter of wpa_ssid structure, which
means "don't care". This value is used in infrastructure mode to request
connection to either AP or PCP, whichever is available in the scan
results. The value is also used in regular WPS (not P2P group formation)
to make WPS work with devices running as either AP or PCP.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
2016-04-08 12:56:34 +03:00
Jouni Malinen
0f34665774 Mark wpa_supplicant_{start,stop}_sched_scan() static
With the only callers in wpas_{start,stop}_pno() moved into scan.c,
there is no need to call these helper functions from outside scan.c
anymore.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-07 11:45:01 +03:00
Hu Wang
3560b32ca3 Fix race condition with PNO stop followed immediately by PNO start
Commit dd271857a5 ('Skip normal scan when
PNO is already in progress') fixed issues with normal scans getting
rejected by the driver when PNO scan is already running. The part about
skipping such a scan request is fine, but the part about clearing
wpa_s->pno back to 0 in EVENT_SCHED_SCAN_STOPPED handler is problematic.

If PNO is stopped ("SET pno 0") and then restarted ("SET pno 1")
immediately, it is possible for the EVENT_SCHED_SCAN_STOPPED event from
the stopping part to be received only after the new PNO instance has
been started. This would have resulted in clearing wpa_s->pno and the
driver and wpa_supplicant getting out of sync. This would then prevent
PNO from being stopped with "SET pno 0" (that fails if wpa_s->pno == 0).

Fix this race condition by reverting the wpa_s->pno = 0 addition from
the EVENT_SCHED_SCAN_STOPPED handler.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-04-06 11:14:34 +03:00
Dmitry Shmidt
f89c32e63f Android: Fix max number of sched scan SSIDs based on driver capability
This adds use of the driver capability (instead of hardcoded
WPAS_MAX_SCAN_SSIDS) in wpas_start_pno() similarly to what was already
done in wpa_supplicant_req_sched_scan().

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2016-04-02 17:35:28 +03:00
Roshan Pius
f1a5a34d8e binder: Implement interface add/remove methods
This commit implements the methods defined in Supplicant service:
1. CreateInterface
2. RemoveInterface
3. GetInterface

The binder service returns the corresponding iface binder object
references which can be used by clients to control a specific
interface.

Signed-off-by: Roshan Pius <rpius@google.com>
2016-04-02 17:35:28 +03:00
Roshan Pius
7b4bbb9f94 binder: Add binder skeletal code for Android
Create the skeletal binder interface for wpa_supplicant. The interface
hierarchy is based off the existing dbus
interface(https://w1.fi/wpa_supplicant/devel/dbus.html).

Since we use libbinder, the binder interface codebase needs to be
written in C++ and can only be compiled on Android platform for now.

The aidl files define binder RPC interfaces. The Android build system
generates the corresponding C++ interface classes which needs to be
implemented by the server process.

The clients can obtain a reference to the binder service (root object)
using:
android::String16 service_name("fi.w1.wpa_supplicant");
android::sp<android::IBinder> binder =
  android::defaultServiceManager()->getService(service_name);

Once a reference to the root object is retrieved, the clients can
obtain references to other RPC objects using that root object methods.

Signed-off-by: Roshan Pius <rpius@google.com>
2016-04-02 17:35:26 +03:00
Jouni Malinen
c01120a05f wpa_supplicant: Do not use struct ieee80211_mgmt::u.probe_req
This struct in the union is empty, but the design of using a zero-length
u8 array here is not fully compatible with C++ and can result in
undesired compiler warnings. Since there are no non-IE fields in the
Probe Request frames, get the location of the variable length IEs simply
by using the pointer to the frame header and the known header length.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-02 16:55:02 +03:00
Bala Krishna Bhamidipati
5cd317d381 Do not clear PMKSA entry or EAP session cache if config does not change
This avoids unnecessary flushing of the PMKSA cache entry and EAP
session data when processing SET_NETWORK commands that set a network
profile parameter to the same value that the parameter already has.

Introduce a new wpa_config_set() and wpa_config_set_quoted() return
value (==1) signifying that the new value being set for the
corresponding field equals to the already configured one so that the
caller can determine that nothing changed in the profile.

For now, this does not cover all the network profile parameters, but
number of the most commonly used parameters are included to cover the
Android use cases where the framework may have issued SET_NETWORK
commands that would have unnecessarily prevented use of PMKSA caching or
EAP fast reauthentication.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-31 17:18:51 +03:00
Jouni Malinen
a6fbff2049 Fix CONFIG_CTRL_IFACE=udp6/udp6-remote builds
wpa_supplicant_global_ctrl_iface_receive() did not handle the from
address properly for the IPv6 case. This was broken by commit
d60886cdaf ('wpa_supplicant: Add monitor
support for global UDP ctrl_iface').

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-28 00:16:52 +03:00
Jouni Malinen
31afdd2274 Use TIOCOUTQ instead of SIOCOUTQ to avoid need for linux/sockios.h
All that the kernel header was doing here is defining SIOCOUTQ to be
TIOCOUTQ. Instead of pulling in the header, we might as well use
TIOCOUTQ directly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 11:40:35 +02:00
Lior David
f347429cf1 P2P: Fix persistent group for 60 GHz networks
Fix two problems with storage of 60 GHz P2P persistent groups:
1. pbss flag was not stored in the network block.
2. When recreating the persistent group from storage,
in addition to the missing pbss flag, the pairwise_cipher and
group_cipher were initialized to CCMP which does not work
in 60 GHz since the default in 60 GHz should be GCMP.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
2016-03-25 18:40:56 +02:00
Jouni Malinen
954e10e483 Make it a bit easier to roam from 2.4 GHz to 5 GHz within ESS
The initial connection to an ESS was already explicitly increasing the
likelihood of picking a 5 GHz BSS. While the throughput estimation is
likely to do same for the roaming decision, it might be possible that
that does not cover all cases. Add couple of dB extra preference for 5
GHz in case the roaming decision falls back to comparing signal levels.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-25 12:12:48 +02:00
Jouni Malinen
585141bb30 Fix a typo in a comment
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-25 12:12:48 +02:00
Jouni Malinen
6a5ee810a3 Include previous BSSID in connection request to indicate reassociation
This allows the SME-in-the-driver case to get similar information about
reassociation that was already available for the SME-in-wpa_supplicant
case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-24 22:35:10 +02:00
Jouni Malinen
cbc3d6fe65 WNM: Verify BSS TM target match against the current network profile
Reject a BSS transition management candidate if it does not match the
current network profile, e.g., due to incompatible security parameters.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-24 12:11:55 +02:00
Roy Marples
2e997eece5 Add interface matching support with -M, guarded by CONFIG_MATCH_IFACE
The new wpa_supplicant command line argument -M can be used to describe
matching rules with a wildcard interface name (e.g., "wlan*").

This is very useful for systems without udev (Linux) or devd (FreeBSD).

Signed-off-by: Roy Marples <roy@marples.name>
2016-03-22 17:41:37 +02:00
Roy Marples
45e3fc72c6 Find correct driver for interface additions/removals
Interface additions/removals are not guaranteed to be for the driver
listening to the kernel events. As such, send the events to
wpa_supplicant_event_global() which can then pick the correct interface
registered with wpa_supplicant to send the event to.

Signed-off-by: Roy Marples <roy@marples.name>
2016-03-22 17:41:37 +02:00
Jouni Malinen
90377029c6 wpa_supplicant: Fix CONFIG_IBSS_RSN=y build without CONFIG_AP=y
Commit 1889af2e0f ('VLAN: Separate station
grouping and uplink configuration') added an ap_sta_set_vlan() function
that gets called from pmksa_cache_auth.c. This broke CONFIG_IBSS_RSN=y
build if src/ap/sta_info.c did not get included in the build, i.e., if
CONFIG_AP=y was not set.

Fix this by making the ap_sta_set_vlan() call conditional on
CONFIG_NO_VLAN being undefined and define this for CONFIG_IBSS_RSN=y
builds. This is fine for wpa_supplicant since CONFIG_AP=y case was
already defining this. For hostapd, this function call is not needed for
CONFIG_NO_VLAN case either.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-21 21:12:20 +02:00
Janusz Dziedzic
5ae65de0b7 wpa_supplicant: Fix p2p_group_add when UDP-based ctrl_iface is used
While p2p_group_add ctrl_interface name could be derived from the main
interface (simple p2p_group_add command), we failed to bind the same UDP
port. Fix this problem and also update the correct ctrl_interface name
(port decrement).

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-20 21:41:40 +02:00
Jouni Malinen
e567c582a7 Fix nfc_pw_token build with CONFIG_FST=y
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-20 20:18:55 +02:00
Masashi Honma
d774c46aae mesh: Use appropriate BLOCKED state duration
Previously, BLOCKED state duration slightly increased up to 3600. Though
the BLOCKED state could be canceled by ap_handle_timer(). Because the
timer timeouts in ap_max_inactivity(default=300sec) and remove STA
objects (the object retains BLOCKED state).

This patch re-designs my commit bf51f4f82b
('mesh: Fix remaining BLOCKED state after SAE auth failure') to replace
mesh_auth_block_duration by ap_max_inactivity and remove incremental
duration.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-03-20 18:24:29 +02:00
Masashi Honma
9f2cf23e2e mesh: Add support for PMKSA caching
This patch add functionality of mesh SAE PMKSA caching. If the local STA
already has peer's PMKSA entry in the cache, skip SAE authentication and
start AMPE with the cached value.

If the peer does not support PMKSA caching or does not have the local
STA's PMKSA entry in the cache, AMPE will fail and the PMKSA cache entry
of the peer will be removed. Then STA retries with ordinary SAE
authentication.

If the peer does not support PMKSA caching and the local STA uses
no_auto_peer=1, the local STA can not retry SAE authentication because
NEW_PEER_CANDIDATE event cannot start SAE authentication when
no_auto_peer=1. So this patch extends MESH_PEER_ADD command to use
duration(sec). Throughout the duration, the local STA can start SAE
authentication triggered by NEW_PEER_CANDIDATE even though
no_auto_peer=1.

This commit requires commit 70c93963ed
('SAE: Fix PMKID calculation for PMKSA cache'). Without that commit,
chosen PMK comparison will fail.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-03-20 17:56:38 +02:00
Masashi Honma
4c522c7798 PMKSA: Flush AP/mesh PMKSA cache by PMKSA_FLUSH command
This extends the wpa_supplicant PMKSA_FLUSH control interface command to
allow the PMKSA list from the authenticator side to be flushed for AP
and mesh mode. In addition, this adds a hostapd PMKSA_FLUSH control
interface command to flush the PMKSA entries.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-03-20 17:37:53 +02:00
Masashi Honma
b8daac18a4 PMKSA: Show AP/mesh PMKSA list in PMKSA command
This extends the wpa_supplicant PMKSA control interface command to allow
the PMKSA list from the authenticator side to be listed for AP and mesh
mode. In addition, this adds a hostapd PMKSA control interface command
to show the same list for the AP case.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-03-20 17:37:53 +02:00
Masashi Honma
2604edbfbd mesh: Add MESH_PEER_ADD command
This allows a mesh peer connection to be initiated manually in
no_auto_peer mesh networks.

Signed-off-by: Natsuki Itaya <Natsuki.Itaya@jp.sony.com>
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-03-20 17:37:53 +02:00
Masashi Honma
e174ef341b mesh: Add MESH_PEER_REMOVE command
This command allows the specified mesh peer to be disconnected.

Signed-off-by: Natsuki Itaya <Natsuki.Itaya@jp.sony.com>
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-03-20 17:37:53 +02:00
Jouni Malinen
f7648c8679 P2P: Advertise IP Address Allocation only if it is enabled on GO
This group capability bit was previously added unconditionally which
could result in the P2P Client assuming the functionality is available
even though the GO would always reject the request (not reply to it with
an assigned IP address) during the 4-way handshake.

Fix this by advertising the capability only if the GO configuration
allow IP address assignment to be completed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-20 17:37:53 +02:00
Daisuke Niwa
192964ddc3 Handle OSEN IE in Assoc Request info if req_ies exists
The 4-way handshake fails with the error "WPA: No wpa_ie set - cannot
generate msg 2/4" while connecting to OSEN network with drivers that
indicate used Association Request frame elements because OSEN IE is not
handled in wpa_supplicant_event_associnfo() if data->assoc_info.req_ies
is not NULL.

Signed-off-by: Daichi Ueura <daichi.ueura@sonymobile.com>
2016-03-20 11:17:39 +02:00
Jouni Malinen
c3dc68e844 Do not invalidate EAP session cache on all network block parameter changes
The bssid and priority parameters in a network block do not have any
effect on the validity of an EAP session entry, so avoid flushing the
cached session when only these parameters are changed. This is mainly to
allow forced roaming or network selection changes without causing fast
reauthentication to be disabled if the changes are done during RSN
association that used EAP.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-16 19:44:32 +02:00
Jouni Malinen
c6c29be1bd Interworking: Add credential realm to EAP-TLS identity
If the configured credential includes a username without '@' (i.e., no
realm) in it and a realm, combine these to form the EAP-Request/Identity
value as "<username>@<realm>" for EAP-TLS. This was already done for
EAP-TTLS as part of the anonymous NAI conversion, but EAP-TLS could have
ended up using a username without any realm information which would be
unlikely to work properly with roaming cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-11 21:06:15 +02:00
Lior David
dfe0745c9a P2P: Add optional op_class argument to P2P_SET listen_channel
The existing implementation in p2p_ctrl_set used a hard-coded operating
class 81 which is only suitable for the social channels in the 2.4 GHz
band, and will not work for the social channel in the 60 GHz band.
Extend this by adding an optional op_class argument to P2P_SET
listen_channel. If not specified, use the default value of 81 to match
existing behavior.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
2016-03-07 13:51:01 +02:00
Naveen Singh
c7fb678f31 D-Bus: Add association response status code property for failure cases
(Re)Association Response frame with status code other than 0 is now
notified over DBUS as a part of PropertiesChanged signal. This can be
used by application in case AP is denying association with status code
17 (band steering) so that it does not interfere in the BSSID selection
logic of wpa_supplicant.

Signed-off-by: Naveen Singh <nasingh@google.com>
2016-03-06 20:44:51 +02:00
Janusz Dziedzic
56e2fc2c31 wpa_supplicant: Add ctrl parameter to INTERFACES command
"INTERFACES ctrl" can now be used to fetch a list of network interfaces
and their control interfaces, e.g., to fetch the UDP port information
for the control interface.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:49 +02:00
Janusz Dziedzic
acf57fae76 ctrl_iface_common: Use sockaddr_storage instead of sockaddr_un
This is a step towards allowing UDP sockets to be used with the common
implementation.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:15:05 +02:00
Janusz Dziedzic
1a2124c650 wpa_supplicant: Use common functions for ctrl_iface
Use the common functions, structures when UNIX socket ctrl_iface used.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:15:05 +02:00
Janusz Dziedzic
d60886cdaf wpa_supplicant: Add monitor support for global UDP ctrl_iface
Add monitor support (ATTACH/DETACH) for the global ctrl_iface when using
the UDP backend.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 10:46:13 +02:00
Janusz Dziedzic
f0e5d3b5c6 wpa_supplicant: Share attach/detach/send UDP ctrl_iface functions
Extend the previously per-interface UDP ctrl_iface functions
(attach/detach/send) to support operations on the global interface as
well.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 10:21:18 +02:00
Janusz Dziedzic
db7fb435f3 wpa_supplicant: Allow UDP ctrl_iface configuration to set the UDP port
This allows the UDP port to be set for the per-interface and global
control interfaces. The format is: udp:<port_no>

For example:
wpa_supplicant -Dnl80211 -ddt -g udp:9888

And in the configuration file:
ctrl_interface=udp:9877

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 10:15:57 +02:00
Eliad Peller
c69ef1d2da P2P: Respect p2p_ignore_shared_freq on p2p_group_add
Make sure wpas_p2p_init_go_params() respects the p2p_ignore_shared_freq
configuration option. Choose currently used frequencies only if this
option is not set, or if there are no unused channels left.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2016-03-04 21:17:32 +02:00
Eliad Peller
4115b0524b P2P: Fix shared freq print in wpas_p2p_init_go_params()
"freq" contains the forced frequency, not the selected one. Print the
correct freq instead.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2016-03-04 21:16:00 +02:00
Ben Rosenfeld
a805731086 P2P: Abort ongoing scan when p2p_find is stopped
When p2p_find is stopped, send request to the driver
in order to cancel an ongoing scan if there is one.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2016-03-03 17:10:26 +02:00
Ilan Peer
1446afc865 wpa_supplicant: Handle EVENT_SCAN_RESULTS when an interface is disabled
An interface can be disabled while it has an ongoing scan request.
In such a case, when the scan results notification is received,
it was being ignored (as the interface is already disabled) so the
scan state was not cleared. This can cause undetermined behavior
for the next scan request.

To handle this, clear the scan state when EVENT_SCAN_RESULTS is
received and the interface is disabled.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-03-03 17:10:26 +02:00