Commit graph

948 commits

Author SHA1 Message Date
Jouni Malinen
b37d582eaf Replace ieee802_11_print_ssid() with wpa_ssid_txt()
There is no need to maintain two different functions for printing out
ASCII text version of SSID.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:23:35 +02:00
Janusz Dziedzic
fd92413417 hostapd: Increase timeout for channel list update to 5 seconds
Before this patch, 1 second timeout was used for regulatory updates. In
some cases, specially when we reload driver modules on some slower
platforms this could take more than 1 second (about 2 seconds). This is
important specially for DFS case, where we have to have correct DFS
region before we will start CAC. In other case (unknown DFS region), CAC
will fail. 5 seconds should be enough for all cases.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-01-30 14:05:14 +02:00
Eytan Lifshitz
04c366cb1d Fix memory leaks and wrong memory access
1. In wpa_config_process_bgscan() fix memory leak after
   calling wpa_config_parse_string()
2. In hostapd_config_defaults(), on failure to allocate bss->radius,
   conf->bss was not freed.
3. In p2p_deauth_nofif(), memory allocated in p2p_parse_ies() was not
   freed in case of NULL minor_reason_code.
4. In p2p_disassoc_nofif(), memory allocated in p2p_parse_ies() was
   not freed in case of NULL minor_reason_code.
5. In p2p_process_go_neg_conf(), memory allocated was not freed in
   case that the P2P Device interface was not waiting for a
   GO Negotiation Confirm.
6. In wpa_set_pkcs11_engine_and_module_path(), the wrong pointer was
   checked.

Signed-hostap: Eytan Lifshitz <eytan.lifshitz@intel.com>
2014-01-30 14:01:31 +02:00
Jouni Malinen
d2f18378e1 WPS NFC: Add BSSID and AP channel info to Configuration Token
This information can help the Enrollee to find the AP more quickly with
an optimized scan.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:44:31 +02:00
Jouni Malinen
25ef8529c1 P2P: Add support for IP address assignment in 4-way handshake
This new mechanism allows P2P Client to request an IPv4 address from the
GO as part of the 4-way handshake to avoid use of DHCP exchange after
4-way handshake. If the new mechanism is used, the assigned IP address
is shown in the P2P-GROUP-STARTED event on the client side with
following new parameters: ip_addr, ip_mask, go_ip_addr. The assigned IP
address is included in the AP-STA-CONNECTED event on the GO side as a
new ip_addr parameter. The IP address is valid for the duration of the
association.

The IP address pool for this new mechanism is configured as global
wpa_supplicant configuration file parameters ip_addr_go, ip_addr_mask,
ip_addr_star, ip_addr_end. For example:

ip_addr_go=192.168.42.1
ip_addr_mask=255.255.255.0
ip_addr_start=192.168.42.2
ip_addr_end=192.168.42.100

DHCP mechanism is expected to be enabled at the same time to support P2P
Devices that do not use the new mechanism. The easiest way of managing
the IP addresses is by splitting the IP address range into two parts and
assign a separate range for wpa_supplicant and DHCP server.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:44:26 +02:00
Jouni Malinen
14d8645f63 WPS NFC: Allow BSSID and channel to be included in handover select
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
068cdb1d98 WPS NFC: New style connection handover select from AP/Registrar
The contents of the WPS connection handover select message was modified
to include the Registrar public key hash instead of the credential.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
3189ca055d WPS NFC: Add AP mode connection handover report
The new NFC connection handover design requires the AP/Registrar to
process the connection handover request message received from the
Enrollee. Add control interface commands for handling this.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
5ce00d09c0 GAS server: Add support for Protected Dual of Public Action frames
When GAS is used with PMF negotiated, Protected Dual of Public Action
frames are expected to be used instead of Public Action frames, i.e.,
the GAS/ANQP frames are expected to be encrypted. Add support for this
different category of Action frames being used for GAS. The payload
after the Category field is identical, so the only change is in using
the Category field based on what was received in the request frames. For
backwards compatibility, do not enforce protected dual to be used on the
AP side, i.e., follow what the station does.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-23 11:19:55 +02:00
Jouni Malinen
7b2c42f8b9 hostapd: Fix PMF robust Action frame processing rules
Due to misplaced parenthesis, unprotected not-Robust Action frames
(e.g., Public Action frames) were dropped in handle_assoc() when such
frames were received during an association that had negotiated use of
PMF. This is not correct since only unprotected Robust Action frames
were supposed to be handled in this way.

This would have broken any Public Action frame use during PMF
association, but such frames were not really supposed to be used
currently (ANQP as the only possible use case should really use
protected dual option in such case).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-23 10:24:21 +02:00
Ilan Peer
a487b35572 hostapd: Fix segmentation fault when calling hostapd_cli all_sta
While iterating over the stations hostapd_ctrl_iface_sta_mib()
might be called with sta == NULL. Fix this.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2014-01-22 19:28:57 +02:00
Janusz Dziedzic
eed65aad14 hostapd: DFS setup seg0 correctly for HT40-
Fix seg0 calculation for HT40+/HT40-.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-01-14 17:14:13 +02:00
Janusz Dziedzic
25592b236b hostapd: DFS/CSA check if CSA in progress
Check if CSA is already in progress, before triggering a new channel
switch.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-01-14 17:13:50 +02:00
Jouni Malinen
08081ad8ef hostapd: Skip full AP configuration validation on SET command
It is possible for the configuration to be temporarily invalid when
adding a new AP through SET commands followed by ENABLE. Avoid this
issue by using less strict validation on SET commands and perform full
configuration validation only on ENABLE. Use cases with configuration
file maintain their previous behavior, i.e., full validation after the
file has been read.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 20:23:56 +02:00
Jouni Malinen
f0cbb986ff Add DRIVER-STATUS command for hostapd
This is just like the same command in wpa_supplicant, i.e., "hostapd_cli
status driver" can be used to fetch information about the driver status
and capabilities.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:12 +02:00
Jouni Malinen
a09ffd5f2f Fix req_scan-deplete-timeout and update eloop API for this
Commit e2f5a9889a was supposed to prevent
new scan request from pushing out the old one. However, it did not
really do that since eloop_deplete_timeout() returned 0 both for the
case where the old timeout existed (and was sooner) and if the old
timeout did not exist. It returned 1 only for the case where an old
timeout did exist and was larger than the new requested value. That case
used to result in wpa_supplicant_req_scan() rescheduling the timeout,
but hew code in eloop_deplete_timeout() did the exact same thing and as
such, did not really change anything apart from the debug log message.

Extend the eloop_deplete_timeout() (and eloop_replenish_timeout() for
that matter since it is very similar) to return three different values
based on whether the timeout existed or not and if yes, whether it was
modified. This allows wpa_supplicant_req_scan() to schedule a new
timeout only in the case there was no old timeout.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
a1a31b6c3f Remove hostapd dump_file functionality
This debugging mechanism has now been deprecated by the control
interface commands that can be used to fetch same internal information
from hostapd in a more convenient way. Leave the empty USR1 signal
handler and configuration file parameter for backwards compatibility.
They can be removed in future versions of hostapd.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-02 18:15:07 +02:00
Jouni Malinen
ea23df652a Make EAPOL dump data available through ctrl_iface STA command
The per-STA/Supplicant state information from the EAPOL authenticator
is now available through "STA <MAC Address> eapol" command.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-02 17:49:48 +02:00
Jouni Malinen
f538be3e82 Add more STA information into the ctrl_iface STA command
This adds TX/RX statistics and information about association into the
per-STA data that is available through the hostapd control interface. In
addition, information about the EAP method is now included with the IEEE
802.1X data.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-02 16:58:14 +02:00
Jouni Malinen
f7fb676633 ACS: Mark acs_fail() static
This function is not used outside acs.c.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 22:30:49 +02:00
Jouni Malinen
5ace51a48a WNM: Clean up le16 variable use to avoid sparse warnings
intval is marked le16 and should be used through proper byte order
conversion functions even if it ended up getting set correctly due to
the two operations cancelling each other.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:41:47 +02:00
Jouni Malinen
8cf1e68c02 Move declaration of hostapd_acs_completed() into correct header file
This function is in hw_features.c and as such, should be declared in
hw_features.h.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:34:43 +02:00
Jouni Malinen
0187c41d88 Declare wpa_debug_* variables in src/utils/wpa_debug.h
These were somewhat more hidden to avoid direct use, but there are now
numerous places where these are needed and more justification to make
the extern int declarations available from wpa_debug.h. In addition,
this avoids some warnings from sparse.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:29:52 +02:00
Jouni Malinen
fcc61230d1 Declare wpa_drivers in src/drivers/driver.h
This avoids some warnings from sparse.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:19:37 +02:00
Jouni Malinen
dbfb8e82ff Remove unnecessary EVENT_RX_ACTION
This driver event was used separately for some Action frames, but all
the driver wrappers converted to this from information that would have
been enough to indicate an EVENT_RX_MGMT event. In addition, the
received event was then converted back to a full IEEE 802.11 management
frame for processing in most cases. This is unnecessary complexity, so
get rid of the extra path and use EVENT_RX_MGMT for Action frames as
well as other management frame subtypes.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 17:18:17 +02:00
Jouni Malinen
912b34f000 Do not process Action frames twice in hostapd SME/MLME
Commit 88b32a99d3 added support for using
some Action frame processing in hostapd for drivers that handle most of
SME/MLME internally (it added FT, this has since be extended for SA
Query and WNM). However, this was added in a way that ended up getting
both the hostapd_rx_action() and hostapd_action_rx() called for Action
frames. This could result in an attempt to process FT, SA Query, and WNM
Action frames twice.

There is need for more significant cleanup in Action frame processing in
hostapd depending on the driver type, but as a simple step to avoid
issues, skip the hostapd_action_rx() call if hostapd_rx_action()
processed the frame.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 11:25:59 +02:00
Jouni Malinen
006309b546 Fix whitespace style
Commit 88b32a99d3 added couple of lines
with incorrect indentation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 11:25:59 +02:00
Jouni Malinen
0e22b8dd4c WPS: Make sure reconfiguration timeout is not left behind on deinit
Even though this is a short timeout, it is at least theoretically
possible for the interface to be removed while waiting for
reconfiguration to start. Avoid issues with this by cancelling the
timeout on any WPS interface deinit. In theory, this should be postponed
until interface removal, but that does not fit very nicely to the
current wps_hostapd.c style.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 10:00:32 +02:00
Jouni Malinen
aa189ac9dd Enable FT with SAE
It was already possible to configure hostapd and wpa_supplicant to use
FT-SAE for the key management, but number of places were missing proper
AKM checks to allow FT to be used with the new AKM.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 10:00:31 +02:00
Jouni Malinen
2d2ecf51aa nl80211: Fix protected Action frame reporting for AP mode
Action frame RX report through EVENT_RX_ACTION did not indicate whether
the frame was protected or not even though that information is available
in mlme_event_mgmt(). hostapd_rx_action() has a workaround for setting
the protected flag for SA Query frames, but that did not apply for other
frames, like FT Action. This broke FT-over-DS when PMF is enabled with
newer kernel versions (i.e., the ones that do not use monitor interface
for receiving management frames).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 10:00:31 +02:00
Jouni Malinen
8d321a7d4c WNM: Move disassociation imminent sending to wnm_ap.c
This gets all WNM BSS Transition Management frame building and sending
within hostapd into the same location.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-27 19:57:47 +02:00
Jouni Malinen
b76f4c2763 hostapd: Make STA flags available through ctrl_iface STA command
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-27 19:35:12 +02:00
Jouni Malinen
aa03dbd517 Remove IEEE80211_REQUIRE_AUTH_ACK
This is not really needed for anything and the standard does not require
such validation step to be made for Authentication frame transmission.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-27 19:35:12 +02:00
Jouni Malinen
121f2ab49a Remove unused STA flags
These three flags were only displayed, but never set or used for
anything else.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-27 19:35:12 +02:00
Jouni Malinen
3578e665bf WNM: Add STA flag to indicate the current WNM-Sleep-Mode state
This can be useful for displaying the current STA state and also for
determining whether some operations are likely to fail or need
additional delay.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-27 19:35:12 +02:00
Jouni Malinen
477689788c WNM: Fix AP processing without wnm_oper driver callback
hostapd_drv_wnm_oper() needs to indicate an error if the driver callback
function is not implemented. Without this, the buf_len argument could
have been left uninitialized which could result in crashing the process.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-27 18:48:04 +02:00
Jouni Malinen
2025cad9b8 WNM: Move ESS Disassoc Imminent sending to a helper function
This makes it easier to trigger the ESS Disassociation Imminent
operation from different sources.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-12-27 18:48:04 +02:00
Jouni Malinen
28ab64af9b WNM: Minimal processing of BSS Transition Management Query/Response
This adds first steps at processing a BSS Transition Management Query on
the AP side. Mainly, the message is parsed and printed out in the debug
log and a minimal BSS Transition Management Request frame is sent as a
response. BSS Transition Management Response frame is also parsed and
details printed out in the debug log.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-27 18:11:07 +02:00
Jouni Malinen
629edfef81 WNM: Fix Sleep Mode AP processing in open network
The previous version could end up calling WPA authenticator routines
even though the authenticator had not been initialized and this could
result in NULL pointer dereference.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 22:26:05 +02:00
Jouni Malinen
7b75c30109 WPS: Reschedule AP configuration reload on EAP completion
Reduce race condition of the station trying to reconnect immediately
after AP reconfiguration through WPS by rescheduling the reload
timeout to happen after EAP completion rather than the originally
scheduled 100 ms after new configuration became known.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-12-26 20:50:28 +02:00
Jouni Malinen
93827f456a hostapd: Allow external management frame processing or testing
This enables more convenient protocol testing of station side
functionality in various error cases and unexpected sequences without
having to implement each test scenario within hostapd.
ext_mgmt_frame_handle parameter can be set to 1 to move all management
frame processing into an external program through control interface
events (MGMT-RX and MGMT-TX-STATUS) and command (MGMT_TX).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
5f9c134ab4 Remove obsolete license notifications
These files have been distributed only under the BSD license option
since February 2012. Clarify the license statements in the files to
match that to avoid confusion.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 22:59:52 +02:00
Jouni Malinen
bad5cdf491 Verify that beacon setup succeeds before proceeding
There is no point in starting the AP operations unless
the driver can be successfully configured to beacon.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 22:46:20 +02:00
Jouni Malinen
7d7f7be2e5 Verify group key configuration for WPA group
If configuration of the group key to the driver fails, move the WPA
group into failed state and indication group setup error to avoid cases
where AP could look like it is working even through the keys are not set
correctly.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 22:38:16 +02:00
Jouni Malinen
30675c3416 Add definitions for new cipher suites from IEEE Std 802.11ac-2013
This adds initial parts for supporting the new GCMP-256, CCMP-256,
BIP-GMAC-128, BIP-GMAC-256, and BIP-CMAC-256 cipher suites.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 22:21:04 +02:00
Jouni Malinen
13b24a766f VHT: Use status code 104 to indicate VHT required
IEEE Std 802.11ac-2013 defines a status code for this, so use that
instead of the unspecified reason.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 21:19:45 +02:00
Andrei Otcheretianski
76aab0305c Add secondary channel IE for CSA
If secondary channel is provided for CSA, advertise it in the Secondary
Channel Offset element in Beacon and Probe Response frames.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-12-24 08:27:28 +02:00
Andrei Otcheretianski
8f4713c5c9 Store entire CS freq_params and not only freq
When CSA flow starts, store the entire struct hostapd_freq_params and
not only CS frequency as it was before. The additional freq_params are
required to advertise CS supplementary IEs such as secondary channel,
wide bandwidth CS, etc.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-12-24 08:23:40 +02:00
Andrei Otcheretianski
13daed58c7 Include driver.h in hostapd.h
This allows use of structs (and not only pointers) defined in drivers.h.
Remove also some not needed forward declarations and redundant includes.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-12-24 08:22:37 +02:00
Johannes Berg
7ffe7d222a AP: Use monotonic time for MMIC failure/TKIP countermeasures
Wall time jumps shouldn't affect MMIC failure/TKIP countermeasures,
so use monotonic time. Change the michael_mic_failure variable to
struct os_reltime for type-safety.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 07:13:34 +02:00
Johannes Berg
dd4e32bae4 AP: Use monotonic time for PMKSA cache
Since the PMKSA cache only uses relative time, use the monotonic time
functions instead of wall time to be correct when the clock jumps.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 07:01:07 +02:00
Johannes Berg
0fc545aee5 AP: Use monotonic time for STA accounting
For type-safety, make sta->acct_session_start a struct os_reltime
and then use monotonic time for accounting. For RADIUS reporting,
continue to use wall clock time as specified by RFC 2869, but for
the session time use monotonic time.

Interestingly, RFC 2869 doesn't specify a timezone, so the value
is somewhat arbitrary.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 06:57:53 +02:00
Marek Kwaczynski
493ba877c3 hostapd: Clear interface_added flag on error path
If more BSSes are added in config file than are supported by the driver,
segmentation fault can appear. For this case, the interface_added flag
needs to be cleared if adding a new BSS fails.

Signed-hostap: Marek Kwaczynski <marek.kwaczynski@tieto.com>
2013-12-14 21:13:52 -08:00
Janusz Dziedzic
f7154ceef7 DFS: Use channel switch when radar is detected
Until now DFS was simply restarting the AP when radar was detected. Now
CSA is used to perform smooth switch to the new channel. Stations not
supporting CSA will behave as before.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-12-07 20:50:15 -08:00
Janusz Dziedzic
6c6c58d157 hostapd: Make hostapd_set_freq_params() public
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-12-07 20:50:15 -08:00
Michal Kazior
b72f949b07 DFS: Allow skipping radar channels
This is needed for AP CSA. Since CSA must happen immediately after radar
is detected there's no time to perform CAC. Thus, radar channels must be
disabled when looking for a new channel to escape to after a radar is
detected.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-12-07 20:50:15 -08:00
Janusz Dziedzic
8d1fdde7f0 nl80211/hostapd: Extend channel switch notify handling
Adds support for VHT by parsing bandwidth and center_freq{1,2}.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-12-07 20:50:15 -08:00
Johannes Berg
10e694a618 AP: Use monotonic clock for SA query timeout
The usual, any timeouts should be using monotonic time.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-07 20:50:15 -08:00
Johannes Berg
af5389610b Use monotonic clock for RADIUS cache timeouts
Use monotonic clock for both cache and query timeouts.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-07 20:50:15 -08:00
Johannes Berg
fe52c210cf Use monotonic clock for last_sae_token_key_update
Just the usual, with a new function os_reltime_initialized()
thrown in that checks whether time has ever been retrieved
(time can't be completely zero).

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-07 20:50:15 -08:00
Johannes Berg
100298e896 AP: Use monotonic time for AP list
Use the new monotonic time to keep track of when an AP
entry expires.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-07 20:50:15 -08:00
Johannes Berg
b3493fa110 AP: Use monotonic time for STA connected time
Connected time is relative, so should be using monotonic time
rather than time of day.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-07 20:50:14 -08:00
Jouni Malinen
7feff06567 Add CONFIG_CODE_COVERAGE=y option for gcov
This can be used to measure code coverage from test scripts.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 19:16:12 +02:00
Jouni Malinen
59d343858d EAP server: Initialize TLS context based on private_key
It is possible for the authentication server to be configured with a
PKCS #12 file that includes a private key, a server certificate, and a
CA certificate. This combination could result in server_cert and ca_cert
parameters not being present and that should still result in TLS context
getting initialized.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 18:08:45 +02:00
Mohammed Shafi Shajakhan
336167c80e AP: Fix inactivity STA timer trigger for driver offload case
Some non-mac80211 drivers, such as ath6kl, support STA inactivity timer
in firmware and may not provide connected stations' idle time to the
userspace. If the driver indicates support for offloaded operation, do
not start the inactivity timer in the hostapd.

Signed-hostap: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
2013-11-24 12:01:55 +02:00
Janusz Dziedzic
80ed037f00 Clear beacon_data before usage
struct beacon_data contains a lot of pointers. Make sure it gets cleared
to zero if hostapd_build_beacon_data() gets called from a path that does
not clear the structure first.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-11-22 23:21:43 +02:00
Marek Kwaczynski
92ecda40e0 hostapd: Set proper VHT capabilities
Set VHT capabilities defined in config file instead only supported
by the driver.

Signed-hostap: Marek Kwaczynski <marek.kwaczynski@tieto.com>
2013-11-22 18:03:04 +02:00
Marek Kwaczynski
77a3e796e1 hostapd: Fix set beacon in multiple BSSID scenario
Check if the BSS interface has started before setting beacon.
Lack of this condition can cause segmantation fault.

Signed-hostap: Marek Kwaczynski <marek.kwaczynski@tieto.com>
2013-11-22 18:02:56 +02:00
Jouni Malinen
cc14091eab VHT: Fix memory leak in STA entry
Commit de3cdf354a adding copying of the
STA's VHT capabilities into the STA entry on the AP. This was done in
allocated memory, but that new memory allocation was not freed anywhere.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-22 17:46:22 +02:00
Jouni Malinen
461e3ebe43 Fix and work around some MinGW compilation issues
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-20 23:12:33 +02:00
Michal Kazior
68d628accd hostapd: Fix interface enabling/disabling and DFS
The 'started' state was tracked incorrectly. It also broke DFS
as it was using hostapd_enable/disable_iface() functions.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-11-20 22:29:35 +02:00
Andrei Otcheretianski
334bf36ac5 Add chan_switch to ctrl interface of wpa_supplicant and hostapd
Add chan_switch to the control interface of wpa_supplicant and hostapd,
and also to wpa_cli and hostapd_cli.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-11-17 17:12:58 +02:00
Andrei Otcheretianski
bf281c129f Add AP channel switch mechanism
Build CSA settings and call the driver to perform the switch. Construct
Beacon, Probe Response, and (Re)Association Response frames both for CSA
period and for the new channel. These frames are built based on the
current configuration. Add CSA IE in Beacon and Probe Response frames.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-11-17 17:12:58 +02:00
Andrei Otcheretianski
e44a384b68 Move AP parameter filling into a helper function
Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-11-17 17:12:58 +02:00
Abhishek Singh
795baf773f hostapd: Filter channel list updated events after country code change
We were not filtering the EVENT_CHANNEL_LIST_CHANGED events based on the
regulatory hint initiator. So wait for EVENT_CHANNEL_LIST_CHANGED event
after our own change was triggered even when regulatory hint initiator
was the driver. This could result in the wait for the channel list to be
updated to be terminated before the real change has occurred and as
such, old channel list remaining in use when configuring
hostapd/wpa_supplicant country parameter. Fix this by filtering the
hints according to the initiator and only regulatory hints initiated by
user will be used to stop the wait.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-15 02:59:55 +02:00
Kyeyoon Park
91f9e6078f GAS: Replenish AP station session timer to 5 seconds
If remaining AP session timeout is less than 5 seconds
for an existing station, replenish the timeout to 5 seconds.
This allows stations to be able to recycle a dialog token
value beyond 5 seconds for GAS exchange.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-08 00:22:32 +02:00
Paul Stewart
c101bb9d23 hostapd: Add option to send OBSS scan params
Add a parameter to send the overlapping BSS scan parameter
information element. This will require clients to perform
background scans to check for neigbors overlapping this
HT40 BSS. Since the implementation is incomplete it should
only be used for testing.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2013-11-07 14:05:41 +02:00
Jouni Malinen
b6881b5218 WPS NFC: Add more debug for NFC Password Token matching
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-07 13:48:49 +02:00
Jouni Malinen
5e1a4565f8 hostapd: Do not start secondary BSS unless interface is enabled
It is possible for additional BSSs to be added while the primary
interface is still in the process of determining channel parameters (HT
co-ex scan, ACS, DFS). Do not enable secondary interfaces in such state
immediately, but instead, wait for the pending operation on the primary
interface to complete. Once that's done, the added extra BSSs will also
be enabled in hostapd_setup_interface_complete().

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 15:41:05 +02:00
Jouni Malinen
36501a22a4 hostapd: Verify hostapd_setup_bss calls
Reject multiple calls to hostapd_setup_bss() for any specific interface.
hostapd_cleanup() must have been called first before trying to restart a
BSS.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 15:41:05 +02:00
Jouni Malinen
54246f8d44 hostapd: Share a single function for BSS deinit
hostapd_bss_deinit() takes care of freeing the associated stations and
calling hostapd_cleanup() to deinit per-BSS services.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 12:48:24 +02:00
Jouni Malinen
6d1ca81ee8 Remove unused hostapd_cleanup_iface_pre()
This has not been used in years and can be removed to clean up the
hostapd deinit path a bit.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 12:44:54 +02:00
Jouni Malinen
747c85f932 hostapd: Add more debug prints to deinit path
This makes it easier to follow the various interface/BSS deinit
operations.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 12:42:20 +02:00
Jouni Malinen
6023a7880b Restore hapd->interface_added tracking to core hostapd
This reverts parts of commit 390e489c0d
that tried to enable removal of the first BSS. Since that operation is
now forced to remove all BSSs, these changes are not needed. The
hostapd_if_remove() operation in hostapd_free_hapd_data() is problematic
for the first BSS since it ends up freeing driver wrapper information
that is needed later when deinitializing the driver wrapper.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 01:38:17 +02:00
Jouni Malinen
486d2ff0eb hostapd: Deinit ctrl_iface in case of add interface failure
Since the control interface is now initialized as part of
hostapd_setup_interface(), it needs to be deinitialized on the error
path.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 01:32:55 +02:00
Jouni Malinen
cdf3fb1f1c Fix removal of a BSS that has not yet been fully initialized
If a secondary BSS is removed while it is waiting for the primary BSS to
complete channel setup (e.g., due to HT co-ex scan, ACS, or DFS), the
hostapd_data instance has not yet been initialized. Fix the BSS removal
code to take this special case into account and not try to deinitialize
the hostapd_data instance that has not yet been started.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 00:57:38 +02:00
Jouni Malinen
2f99d90726 Remove all BSSs on removal of the first one
The changes in commit 5592065850 to allow
any BSS to be removed were a bit too early since there are still number
of areas that use the first BSS as a special case. Especially the
driver_ops API is going to require quite a bit of cleanup before removal
of the first BSS without the other BSSes of the same radio can be done
safely.

For now, force all BSSs to be removed in case the first one is removed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 00:43:10 +02:00
Jouni Malinen
2b6623ab13 hostapd: Do not terminate process on dynamic interface add failure
Limit the calls to eloop_terminate() to happen only for the
initialization failure from the interfaces that we specified on the
command line. This allows hostapd process to continue operating even if
a dynamically added interface fails to start up. This allows the upper
layer software to fix a configuration error and retry.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-05 17:35:11 +02:00
Jouni Malinen
d4f1a347ce Allow AP mode configuration with VHT enabled on 2.4 GHz
hostapd_set_freq_param() rejected the 20 MHz channel case with
vht_enabled due to the existing validation step including only 5 GHz (to
be more exact, only >= 5000 MHz). While the behavior may not be fully
defined for 2.4 GHz, we can enable this based on driver capability
advertisement to fix automatic VHT selection for P2P use cases.
mac80211_hwsim advertises VHT for 2.4 GHz band and that resulted in
failures when trying to start GO on that band with vht=1 parameter.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-04 11:51:56 +02:00
Jouni Malinen
bb337ddac2 DFS: Do not use cf1 to override freq for 20 MHz channels
NL80211_ATTR_CENTER_FREQ1 is defined to be used for anything but 20 MHz
bandwidth, so it could be unset for 20 MHz channels. Do not use it to
override center frequency from NL80211_ATTR_WIPHY_FREQ (if available)
for 20 MHz channels to avoid clearing frequency.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 21:50:48 +02:00
Jouni Malinen
0dfd2c61a5 Document AP mode startup functions
This provides some more details on how interfaces and BSSes are
initialized during hostapd startup.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 21:30:31 +02:00
Jouni Malinen
fee947bfc0 hostapd: Use correct wpa_printf verbosity level for message
This configuration file message is informative and MSG_INFO should be
used instead of MSG_ERROR.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 20:12:36 +02:00
Jouni Malinen
e4ba031531 hostapd: Use start_ctrl_iface() from hostapd_add_iface()
Better share the same function for initializing control interface from
the two possible paths that can add a new interface to hostapd.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
bf7f09bd24 Fix AP mode QoS Map configuration to be per-BSS
This is a per-BSS configuration parameter and as such, needs to be
configured to the driver from hostapd_setup_bss() instead of
hostapd_driver_init().

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
dc036d9ee0 DFS: Convert hostapd_data use to hostapd_iface
DFS operations are specific to the interface (radio/wiphy), not BSS
(netdev/vif), so hostapd_iface is the appropriate element to use in
them.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
2db938e8de hostapd: Fill in phyname automatically
If per-BSS configuration enabling did not provide a phy name, iface->phy
was left empty. It can be helpful to set this up automatically, so fill
that when initializing the interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
5ae6449ca2 hostapd: Add ctrl_iface STATUS command
This can be used to fetch runtime information about hostapd interfaces.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
afadaff976 Optimize 40 MHz HT co-ex scan on AP
Only scan the affected channels instead of all enabled channels when
determining whether the primary and secondary channel for HT40 needs to
be swapped. This speed up HT40 setup considerably on 5 GHz band.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
7d6d73701e hostapd: Add AP-ENABLED/DISABLED ctrl_iface events
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
e1c5faf007 hostapd: Track interface state
The new hostapd_iface::state enum is used to track the current state of
the hostapd interface (a radio/wiphy).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
f0793bf191 hostapd: Wait for channel list update after country code change
If hostapd is requested to set the country code and the previous country
code differs from the new one, the channel list information from the
driver may change. This change may not be instant, so wait for an
EVENT_CHANNEL_LIST_CHANGED event before continuing interface setup with
fetching of the channel list information. This fixes issues where the
selected channel is not available based on the previous regulatory data
and update through CRDA takes some time.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
ae134e1d2b hostapd: Add ctrl_iface events for ACS
These give status information to external observers from automatic
channel selection operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
ad08e1413b hostapd: Move ctrl_iface initialization to happen earlier
Channel determination may take considerable time when ACS or DFS is
used, so it is useful to be able to observe this process through the
control interface. Move the initialization of the control interfaces to
happen before channel determination so that this can be achieved.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
4a5deb9b9d hostapd: Simplify interface initialization
Use hostapd_interface_init2() for all interfaces instead of the
previously used different paths for per-interface-config and
per-BSS-config cases. This moves the calls to hostapd_driver_init() and
hostapd_setup_interface() to happen after all configuration files have
been read.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
186c905912 DFS: Add control interface events for various DFS events
These can be useful for external programs that track the current state
of the AP.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 11:31:48 +02:00
Jouni Malinen
71cdf6b624 hostapd: Fix ENABLE failure to not remove interface
Previously, ENABLE command ended up freeing the hostapd_iface context on
initialization failures, but did not even remove the interface from the
list of available interfaces. This resulted in use of freed memory with
any following operation on the same interface. In addition, removing the
interface on initialization failure does not seem like the best
approach. Fix both of these issues by leaving the interface instance in
memory, but in disabled state so that the configuration can be fixed and
ENABLE used again to enable the interface or REMOVE used to remove the
interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 11:31:48 +02:00
Jouni Malinen
61323e70e1 Convert perror/printf calls to wpa_printf
This makes debug and error logging more consistent and allows them to be
directed to a file more easily.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-02 12:58:33 +02:00
Jouni Malinen
2aec4f3c0c Allow add-BSS operation to re-use existing netdev
When removing and re-adding the first wlan# netdev to hostapd
dynamically, the netdev is already present and should not be removed and
re-added to maintain its state as not-added-by-hostapd so that it does
not get removed automatically.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 22:34:25 +02:00
Jouni Malinen
5592065850 hostapd: Allow a single BSS to be removed from an interface
The global control interface command "REMOVE <ifname>" can now be used
to remove a single virtual interface (BSS) without affecting other
virtual interfaces on the same radio.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 22:30:15 +02:00
Kyeyoon Park
2e2fff37e9 hostapd: Allow a single BSS to be added to an interface
The global control interface command "ADD
bss_config=<phyname>:<config file>" can now be used to add a single
virtual interface (BSS) to an interface.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 22:30:15 +02:00
Kyeyoon Park
a1fb5692af hostapd: Make hostapd_interface_init_bss() available externally
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 22:00:31 +02:00
Kyeyoon Park
66936c6af8 hostapd: Make hostapd_init() available externally
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 22:00:31 +02:00
Kyeyoon Park
390e489c0d hostapd: Allow the first BSS in a multi-BSS setup to be removed
This moves the vif added check from core hostapd to the driver wrapper
(only driver_nl80211.c uses this) and reorders operations a bit to allow
the first BSS (vif) to be removed from a multi-BSS setup.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 22:00:31 +02:00
Kyeyoon Park
33b0b330ce hostapd: Fix error path in hostapd_add_iface()
Incorrect count variable was used in freeing up the BSS data.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 15:59:12 +02:00
Helmut Schaa
770ecdf27c ACS: Do not get stuck while failing to do a subsequent scan
Return control flow to hostapd by calling hostapd_acs_completed()
if requesting a scan from the underlying device fails.

Signed-hostapd: Helmut Schaa <helmut.schaa@googlemail.com>
2013-10-31 15:12:21 +02:00
Michal Kazior
813d4bac5a DFS: Add support for multi-BSS
If radar was detected single BSS is notified about it. This caused only
that single BSS to be stopped and restarted. However, due to nl80211
interface combinations the BSS was not started on a new channel and
other BSSes remained operating on the old channel.

The downside is that hostapd_disable_iface() causes deauth frames to be
sent. This is undesired but on the other hand it doesn't make sense to
create workarounds that imitate CSA's 'block tx'. For proper Tx
quiescing CSA should be properly implemented.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
2013-10-31 15:12:17 +02:00
Michal Kazior
954e71d270 DFS: Reset cac_started properly
If CAC was stopped but hostapd was not terminated cac_started would
remain set to 1.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
2013-10-31 14:49:38 +02:00
Michal Kazior
6a398ddc9a DFS: Sanitize channel availability checks
Fixes corner case of holes in channel list and simplifies availability
checks.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-10-31 14:49:06 +02:00
Michal Kazior
32595da608 DFS: Fix HT40/VHT calculation
Decouple HT/VHT offset/center-freq calculations from channel lookup.
This will be necessary for further improvements on the DFS codebase.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-10-31 14:49:03 +02:00
Jouni Malinen
6f2db2fbdd hostapd: Validate configuration parameters on RELOAD command
Reject RELOAD control interface command if the dynamic configuration
changes have resulted into a state where the configuration is invalid.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-29 16:58:21 +02:00
Jouni Malinen
eff0fd1ee8 hostapd: Move generic configuration functions into src/ap
This allows the configuration validation routines to be called from
src/ap/*.c for runtime updates of configuration without reprocessing the
full configuration file.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-29 16:58:21 +02:00
Jouni Malinen
5afaa067d9 hostapd: Allow per-BSS (vif) configuration files
This provides a new option for configuring multiple virtual interfaces
(BSS) that share a single radio. The new command line parameter
-b<phyname>:<config file name> is used to define one or more virtual
interfaces for each PHY. The first such entry for a new PHY is used to
initialize the interface structure and all consecutive parameters that
have the same PHY name will be added as virtual BSS entries to that
interface. The radio parameters in the configuration files have to be
identical.

This can be used as an alternative for the bss=<ifname> separator and
multiple BSSes in a single configuration file design while still
allowing hostapd to control the PHY (struct hostapd_iface) as a group of
virtual interfaces (struct hostapd_data) so that common radio operations
like OLBC detection and HT40 co-ex scans can be done only once per real
radio.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-29 16:58:21 +02:00
Jouni Malinen
ebd79f07c4 hostapd: Make hostapd_config::bss array of pointers
This makes it more convenient to move BSS configuration entries between
struct hostapd_config instances to clean up per-BSS configuration file
design.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-29 16:58:21 +02:00
Jouni Malinen
a781e211f9 hostapd: Force PSK to be derived again on BSS reload
This may be needed if the wpa_psk information for previously derived
from passphrase and either the SSID or the passphrase has changed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-29 16:58:20 +02:00
Jouni Malinen
9f104b0324 hostapd: Reuse hostapd_clear_old() for RELOAD command
Instead of duplicating the functionality and missing changes (like the
hostapd_broadcast_wep_clear() call), use the hostapd_clear_old()
function that was already used for the similar case with configuration
file reload.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-29 16:09:34 +02:00
Eliad Peller
6b02335a96 hostapd: Mask out not-supported VHT capabilities
Mask the remote VHT capabilities with our own capabilities, similarly
to what is done for HT capabilities.

Signed-hostap: Eliad Peller <eliadx.peller@intel.com>
2013-10-27 19:28:40 +02:00
Eliad Peller
7f0303d5b0 hostapd: Verify VHT 160/80+80 MHz driver support
Make sure the driver supports 160/80+80 MHz VHT capabilities
before trying to configure these channels.

Signed-hostap: Eliad Peller <eliadx.peller@intel.com>
2013-10-27 19:17:23 +02:00
Eliad Peller
c781eb8428 hostapd: Verify VHT capabilities are supported by driver
Make sure the defined VHT capabilities are supported by the driver.

Signed-hostap: Eliad Peller <eliadx.peller@intel.com>
2013-10-27 19:11:29 +02:00
Jouni Malinen
e7ecab4a3b Use ARRAY_SIZE() macro
Replace the common sizeof(a)/sizeof(a[0]) constructions with a more
readable version.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-26 17:49:05 +03:00
Janusz Dziedzic
2e946249b1 DFS: Handle radar event when CAC actived correctly
When we have CAC active and receive a radar event, we should ignore
CAC_ABORT event and handle channel switch in the radar event handler.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-26 17:48:55 +03:00
Janusz Dziedzic
5eaf240af5 DFS: Fix overlapped() function to check only DFS channels
This fixes a problem when operating on non-DFS channel and receiving a
radar event for that channel. Previously, we would have decided to
switch channels.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-26 17:48:46 +03:00
Janusz Dziedzic
345276a6b5 DFS: Adjust center freq correctly for VHT20/VHT40
Setup correct seg0 for VHT with 20/40 MHz width (VHT_CHANWIDTH_USE_HT).

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-26 17:48:41 +03:00
Janusz Dziedzic
1dc17db34a DFS: Fix available channels list for VHT80
Add a table of available VHT80 channels. This table contains the first
available channel. We will also choose this first channel as the control
one.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-26 17:48:36 +03:00
Jouni Malinen
03610ad28d Clean up get_seqnum() use for IPN
Some driver wrappers may implement this by writing eight octets even
though IPN is only six octets. Use a separate WPA_KEY_RSC_LEN (8) octet
buffer in the call to make sure there is enough buffer room available
for the full returned value and then copy it to IPN field.

The previous implementation used the following igtk field as the extra
buffer and then initialized that field afterwards, so this change does
not fix any real issue in behavior, but it is cleaner to use an explicit
buffer of the maximum length for get_seqnum().

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-26 15:56:07 +03:00
Jouni Malinen
35f836375d DFS: Add forgotten break statement
The VHT_CHANWIDTH_160MHZ case fell through to the default case and
printed out a debug message that was not supposed to be shown here.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-26 15:55:09 +03:00
Helmut Schaa
677cf19091 hostapd: Select any supported channel if ACS fails
Signed-hostap: Helmut Schaa <helmut.schaa@googlemail.com>
2013-10-23 00:44:48 +03:00
Helmut Schaa
20f9cb1842 hostapd: Allow ACS to deal with partial survey data
Previously ACS required valid survey data on all available channels.
This can however not be guaranteed. Instead of just failing, fall back
to the subset of channels that have valid ACS data.

Signed-hostap: Helmut Schaa <helmut.schaa@googlemail.com>
2013-10-23 00:44:41 +03:00
Helmut Schaa
3645fd5aae hostapd: Propagate ACS errors to iface setup
Otherwise hostapd might hang doing nothing anymore. Propagate ACS
errors so we can fail gracefully.

Signed-hostap: Helmut Schaa <helmut.schaa@googlemail.com>
2013-10-23 00:44:36 +03:00
Helmut Schaa
0e1d0b370f hostapd: Don't get stuck after failed ACS
If ACS fails we still need to call hostapd_setup_interface_complete.
Otherwise hostapd will just hang doing nothing anymore. However, pass
an error to hostapd_setup_interface_complete to allow a graceful fail.

Signed-hostap: Helmut Schaa <helmut.schaa@googlemail.com>
2013-10-23 00:44:30 +03:00
Jouni Malinen
9bc33868bf Add test option for specifying hardcoded BSS Load element
The new bss_load_test parameter can be used to configure hostapd to
advertise a fixed BSS Load element in Beacon and Probe Response frames
for testing purposes. This functionality is disabled in the build by
default and can be enabled with CONFIG_TESTING_OPTIONS=y.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Kyeyoon Park
c551700f1f Interworking: Add support for QoS Mapping functionality for the AP
This allows QoS Map Set element to be added to (Re)Association Response
frames and in QoS Map Configure frame. The QoS Mapping parameters are
also made available for the driver interface.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Janusz Dziedzic
899cc14e10 hostapd: Add support for DFS with 160 MHz channel width
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-17 21:06:16 +03:00
Janusz Dziedzic
6de0e0c99e Mark DFS functions static and rename them
These functions are not used from outside dfs.c anymore.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-17 21:05:54 +03:00
Janusz Dziedzic
58b73e3dd9 hostapd: DFS with 40/80 MHz channel width support
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-17 21:05:44 +03:00
Janusz Dziedzic
04e8003c6c nl80211: Use struct hostapd_freq_params with start_dfs_cac
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-17 21:05:31 +03:00
Janusz Dziedzic
72c753d7bb hostapd: Split hostapd_set_freq to helper function
This allows the functionality to fill in a struct hostapd_freq_params to
be shared.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-17 21:05:23 +03:00
Janusz Dziedzic
e76da50529 hostapd: Add AP DFS support
Add DFS structures/events handlers, CAC handling, and radar detection.
By default, after radar is detected or the channel became unavailable, a
random channel will be chosen.

This patches are based on the original work by Boris Presman and
Victor Goldenshtein. Most of the DFS code is moved to a new dfs.c/dfs.h
files.

Cc: Boris Presman <boris.presman@ti.com>
Cc: Victor Goldenshtein <victorg@ti.com>

Signed-hostap: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-17 21:05:15 +03:00
Helmut Schaa
ded22b5390 hostapd: Fix segfault after ACS when flushing STAs
When hostapd receives an auth frame during ACS the transmission of
the according auth response will always fail:

ACS: Automatic channel selection started, this may take a bit
[..]
send_auth_reply: send: Resource temporarily unavailable
[..]

However, a station info entry was created. Once ACS is finished
it will flush all stations even though hapd was not yet fully
initialized. This results in a segfault when trying to access
hapd->radius:

0  0x0042c1c0 in radius_client_flush_auth ()
1  0x00416a94 in ap_free_sta ()
2  0x00416cc0 in hostapd_free_stas ()
3  0x0040bce8 in hostapd_flush_old_stations ()
4  0x0040c790 in hostapd_setup_interface_complete ()
5  0x0046347c in acs_scan_complete ()
6  0x0040f834 in hostapd_wpa_event ()
7  0x0043af08 in send_scan_event.part.46 ()
8  0x00443a64 in send_scan_event ()
9  0x00443c24 in do_process_drv_event ()
10 0x004449e8 in process_global_event ()
11 0x7767d7d0 in ?? ()

Fix this by not presuming anything about the initialization state of
hapd and checking ->radius before accessing.

Signed-off-hostapd: Helmut Schaa <helmut.schaa@googlemail.com>
2013-10-14 20:44:31 +03:00
Dmitry Shmidt
24d110dca3 Replace printf with wpa_printf debug message
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-10-14 20:40:57 +03:00
Jouni Malinen
0249c12596 Avoid compiler warning with CONFIG_NO_STDOUT_DEBUG=y
There is no need to use the bss variable which is used only within a
wpa_printf() call that can be conditionally removed from the build.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-25 19:24:17 +03:00
Jouni Malinen
ed1bf011da Allow hostapd config file for dynamically added interface
This extends hostapd global control interface command "ADD" to use a
configuration file instead of requiring configuration to be built using
SET command.

The command format is now following:
ADD <ifname> <control path|config=<path to config>>

For example:

ADD wlan0 /var/run/hostapd
ADD wlan0 config=/tmp/hostapd.conf

When using the configuration file option, ctrl_interface parameter in
the file needs to be set to allow ENABLE command to be issued on the new
interface.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-25 19:07:29 +03:00
Jouni Malinen
97bacf7cf6 Do not clear hostapd configuration parameters on disable-iface
There was a comment about the the cleanup steps being from
hostapd_cleanup_iface(). However, the operations that cleared some
security parameters do not seem to exist elsewhere and do not make sense
here. Remove them to avoid changing configuration with DISABLE followed
by ENABLE.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-25 18:35:32 +03:00
Jouni Malinen
66f4dd1550 hostapd: Fix couple of deinit path cases to clear pointers
This fixes some issues where dynamic interface enable/disable cycles
could end up trying to free resources twice and crash the process while
doing so.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-25 18:14:13 +03:00
Jouni Malinen
f2c566027e P2P: Add a command for removing a client from all groups
The new control interface command P2P_REMOVE_CLIENT <P2P Device
Address|iface=Address> can now be used to remove the specified client
from all groups (ongoing and persistent) in which the local device is a
GO. This will remove any per-client PSK entries and deauthenticate the
device.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 21:35:10 +03:00
Jouni Malinen
01a57fe420 P2P: Maintain list of per-client PSKs for persistent groups
Record all generated per-client PSKs in the persistent group network
block and configure these for the GO Authenticator whenever re-starting
the persistent group. This completes per-client PSK support for
persistent groups.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 21:35:10 +03:00
Jouni Malinen
759fd76b7f P2P: Select PSK based on Device Address instead of Interface Address
When using per-device PSKs, select the PSK based on the P2P Device
Address of the connecting client if that client is a P2P Device. This
allows the P2P Interface Address to be changed between P2P group
connections which may happen especially when using persistent groups.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 11:30:26 +03:00
Jouni Malinen
94ddef3e72 P2P: Make peer's P2P Device Address available to authenticator
This can be used to implement per-device PSK selection based on the
peer's P2P Device Address instead of P2P Interface Address.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 11:05:19 +03:00
Jouni Malinen
52177fbb70 P2P: Store P2P Device Address in per-device PSK records
This makes the P2P Device Address of the Enrollee available with the PSK
records to allow P2P Device Address instead of P2P Interface Address to
be used for finding the correct PSK.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 10:47:34 +03:00
Jouni Malinen
05766ed8de P2P: Allow per-device PSK to be assigned
"wpa_cli p2p_set per_sta_psk <0/1>" can now be used to disable/enable
use of per-device PSKs in P2P groups. This is disabled by default.
When enabled, a default passphrase is still generated by the GO for
legacy stations, but all P2P and non-P2P devices using WPS will get
a unique PSK.

This gives more protection for the P2P group by preventing clients from
being able to derive the unicast keys used by other clients. This is
also a step towards allowing specific clients to be removed from a group
reliably without having to tear down the full group to do so.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 10:14:29 +03:00
Michal Kazior
50f4f2a066 hostapd: Add Automatic Channel Selection (ACS) support
This adds ACS support to hostapd. Currently only survey-based
algorithm is available.

To use ACS you need to enable CONFIG_ACS=y in .config and use
channel=0 (or channel=acs_survey) in hostapd.conf.

For more details see wiki page [1] or comments in src/ap/acs.c.

[1]: http://wireless.kernel.org/en/users/Documentation/acs

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-08-31 11:51:06 +03:00
Michal Kazior
0185007c2e hostapd: Add survey dump support
This adds survey dump support for all frequencies
and for specific desired frequencies. This will later
be used by ACS code for spectrum heuristics.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-08-25 18:35:25 +03:00
Michal Kazior
245e026ec8 hostapd: Split up channel checking into helpers
This splits up the channel checking upon initialization into a few
helpers. This should make this a bit easier to follow. This also paves
the way for some initial ACS entry code.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-08-25 18:35:20 +03:00
David Spinadel
239abaf2ab WPS: Set currently used RF band in RF Bands attribute
According to WSC specification (Ver 2.0.2, section 8.3), RF Bands
attribute should be set to the specific RF band used for the current
message. Add an option to set wanted band in wps_build_rf_bands() and
add a callback to get the current band from wpa_supplicant and hostapd.

Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-08-25 10:55:53 +03:00
Jouni Malinen
5bcd5c5a68 FT RRB: Clear pad field to avoid sending out uninitialized data
The pad field in the RRB messages is unused, but it should be
initialized to avoid sending out arbitrary data from stack. This was
also generating number of valgrind complaints about uninitialized memory
accesses in local FT tests.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-25 00:35:10 +03:00
Jeffin Mammen
e96872a4f2 WPS: Track peer MAC address from the last operations
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 17:48:59 +03:00
Jeffin Mammen
ae23935e7d WPS: Track PBC status
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 17:48:25 +03:00
Jeffin Mammen
61b6520e16 WPS: Track result of the latest WPS operation
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 17:48:20 +03:00
Jeffin Mammen
50396e29da WPS: Add PBC mode activated/disabled events
This makes it easier to track PBC state on the registrar.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 16:52:48 +03:00
Jouni Malinen
961750c1e8 WPS: Share a common function for error strings
This makes it easier to maintain the list of WPS_EI_* error values and
matching strings.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 16:32:34 +03:00
Jouni Malinen
d2ba3d6bd9 VLAN: Simplify no-WEP with VLAN check
No need to have a local variable and two #ifndef blocks for this.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-07 12:24:18 +03:00
Michael Braun
d66dcb0d0b WEP: Remove VLAN support from hostapd
This removes WEP with VLAN support and thus avoids increasing
complexity for tagged VLANs.

Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2013-08-07 12:22:38 +03:00
Michael Braun
c2db79f237 VLAN: Remove vlan_tail
Everything in hostapd can be implemented efficiently without vlan_tail.

Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2013-08-04 21:45:50 +03:00
Sujith Manoharan
69dd2967db WDS: Fix WEP usage with nl80211 wds_sta=1
The static WEP keys have to be configured for the new VLAN
interface that is created for a 4addr WDS peer, not doing so
breaks WEP functionality in nl80211/4addr based WDS links.

Signed-hostap: Sujith Manoharan <c_manoha@qca.qualcomm.com>
2013-07-20 17:41:22 +03:00
Sujith Manoharan
3f9a8137f5 hostapd: Add a config option to control beaconing
In a AP/STA concurrent setup, if the STA interface is continually
scanning, trying to connect to a network, the AP interface
is basically broken since beaconing would be erratic.

This option can be used in a WDS setup where one AP acts as a
Client/AP-Repeater. The Repeater AP interface has to start beaconing
only after the Client interface has established a WDS link with the
"Root AP".

Signed-hostap: Sujith Manoharan <c_manoha@qca.qualcomm.com>
2013-07-20 17:20:43 +03:00
Jouni Malinen
67fe933d40 Add server identity configuration for EAP server
The new server_id parameter in hostapd.conf can now be used to specify
which identity is delivered to the EAP peer with EAP methods that
support authenticated server identity.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-07 20:30:10 +03:00
Jouni Malinen
080585c01a Add support for OCSP stapling to validate server certificate
When using OpenSSL with TLS-based EAP methods, wpa_supplicant can now be
configured to use OCSP stapling (TLS certificate status request) with
ocsp=1 network block parameter. ocsp=2 can be used to require valid OCSP
response before connection is allowed to continue.

hostapd as EAP server can be configured to return cached OCSP response
using the new ocsp_stapling_response parameter and an external mechanism
for updating the response data (e.g., "openssl ocsp ..." command).

This allows wpa_supplicant to verify that the server certificate has not
been revoked as part of the EAP-TLS/PEAP/TTLS/FAST handshake before
actual data connection has been established (i.e., when a CRL could not
be fetched even if a distribution point were specified).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-06-30 01:01:15 +03:00
Michael Braun
80ebfd9527 VLAN: Avoid access to non-existing interfaces
Currently, hostapd_get_vlan_id_ifname() is used to determine if a given
vlan is valid *and* to actually determine the interface. This leads to
wpa_set_keys() sometimes setting the key on the wildcard interface name,
which does not make sense.

This patch therefore adds hostapd_vlan_id_valid() and makes
hostapd_get_vlan_id_ifname() not return a wildcard interface.

Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2013-06-25 12:03:02 +03:00
Michael Braun
4345fe963e bridge: Track inter-BSS usage
Currently, struct hostapd_vlan is a per-BSS data structure which
also contains informations about whether to remove the bridge
or clear wlan / tagged-vlan interface from the bridge.

In a multi-interface multi-BSS setup, this can lead to the following
race condition:
 1. wlan0 creates VLAN A, sets DVLAN_CLEAN_BR and DVLAN_CLEAN_VLAN_PORT
 2. wlan1 creates VLAN A, does not set DVLAN_CLEAN_BR and
    DVLAN_CLEAN_VLAN_PORT as already there
 3. wlan0 removes VLAN A, removes tagged-interface from the bridge
    but not the bridge.
    Now wlan1 VLAN A is unusable due to the missing uplink.
 4. wlan1 removes VLAN A, does not cleanup

Solution:
This requires an inter-BSS inter-interface data structure to track the
bridge / bridge port usage within hostapd. This data structure could
also be used to track any other device-has-been-created-by-hostapd
information or when regarding interface freeing.

Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2013-06-25 12:00:10 +03:00
Michael Braun
459eee923c bridge: Use safe default bridge interface
Currently by default, all BSS share the bridge brvlan%d.
While this is sane when no tagged-interface is given, this
is insane when different tagged interfaces are given, as
it would result in bridging those tagged interfaces.

This patch therefore uses br%s%d with %s=tagged_interface
and %d=VLAN ID as bridge name when a tagged-interface is given.

Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2013-06-25 11:10:00 +03:00
Michael Braun
2aaeedfa07 bridge: Give bridge name in per-bss configuration
Currently, when different BSS using different tagged vlan
interfaces, they are forced to share the bridge brvlan#,
which is not desirable.

This patch fixes this by making the bridge name configurable.

Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2013-06-25 11:09:01 +03:00
Jouni Malinen
85b4eac364 P2P: Do not reply to 802.11b-only Probe Request frames as GO
If AP mode SME/MLME within wpa_supplicant is used for processing Probe
Request frames in GO mode, drop Probe Request frames that include only
802.11b rates per P2P spec section 2.4.1.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-19 19:16:23 +03:00
Kyeyoon Park
4331263b73 Fix session timeout after ANQP dummy STA entry with SME-in-driver
Upon association, disable the timer that removes the dummy STA. This
timer caused the STA that associates within 5 seconds of doing an ANQP
query to disassociate, thinking it's a dummy STA. Similar call was
already there for the SME/MLME-in-hostapd case in handle_auth(), but the
SME-in-driver case was not previously addressed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-18 17:40:51 +03:00
Jouni Malinen
3cb953e4b6 Do not set driver MAC ACL unless driver supports this
This cleans up debug log by not including comments about failed
operations in case the operation is known to fail due to not being
supported by the driver.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-24 13:37:22 +03:00
Vivek Natarajan
3c4ca36330 hostapd: Support MAC address based access control list
Enable MAC address based ACL for the drivers which advertise
this capabilty with NL80211_ATTR_MAC_ACL_MAX. Either of blacklist
or whitelist is supported, though, not simultaneously.

Signed-hostap: Vivek Natarajan <nataraja@qca.qualcomm.com>
2013-05-24 13:26:35 +03:00
Jouni Malinen
901d1fe1e5 WNM: Remove PMKSA cache entry on ESS disassoc imminent notification
This is needed to avoid allowing the STA to reconnect using a cached
PMKSA. ESS disassoc imminent notification is normally used to indicate
that the STA session will be terminated and as such, requiring full
authentication through the authentication server after this is needed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-23 16:50:06 +03:00
Kyeyoon Park
d5b559b641 WNM: Add disassociation timeout processing for ESS_DISASSOC
The hostapd_cli ess_disassoc command now takes three arguments (STA MAC
address, timeout in ms, URL) and the STA is disconnected after the
specified timeout.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:13:40 +03:00
Jouni Malinen
c4bf83a723 P2P: No duplicate AP-STA-CONNECTED/DISCONNECTED as global event
These events are sent as a special case to both the group interface and
"parent interface" (i.e., the interface that was used for managing P2P
negotiation). The latter is not really correct event, so get rid of it
with the new global control interface design where there is no need to
support legacy upper layer implementations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 19:18:31 +03:00
Jouni Malinen
7793c959e6 Clean up AP-STA-CONNECTED/DISCONNECTED prints
Use shared code to print the parameters so that they do not need to be
generated four times separately.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 19:09:41 +03:00
Jouni Malinen
058c8636a7 FT RRB: Fix a memory leak on error path
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 09:49:26 +03:00
Simon Wunderlich
b113a171ac DFS: Add ieee80211h hostapd configuration parameter
This patch is based on the original work by Boris Presman and
Victor Goldenshtein. Channel Switch Announcement support has been
removed and event handling as well as channel set handling was
changed, among various other changes.

Cc: Boris Presman <boris.presman@ti.com>
Cc: Victor Goldenshtein <victorg@ti.com>
Signed-hostap: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
2013-05-09 20:14:53 +03:00
Johannes Berg
8543ed8a37 WPA: Print pairwise EAPOL-Key flag as a bool
Since "pairwise" is defined as an integer, the current assignment leads
to it having the value 0 or 8, which is a bit strange in debug output:

WPA: Send EAPOL(version=2 secure=1 mic=1 ack=1 install=1 pairwise=8
kde_len=46 keyidx=2 encr=1)

Use !!(...) to normalize it to 0 or 1.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-05-04 11:48:57 +03:00
Johannes Berg
7af092a015 hostapd: Add Key MIC in group EAPOL-Key frames corruption test option
For some testing it can be useful to force the Key MIC in group
EAPOL-Key frames to be corrupt. Add an option to allow setting a
probability for corrupting the Key MIC and use it in the WPA code,
increasing the first byte of the MIC by one to corrupt it if desired.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-05-04 11:45:03 +03:00
Ben Greear
728d97171b Use status code 17 (unable to handle new STA) on max-STA limitation
This is more useful information than the previously used value 1
(unspecified failure).

Signed-hostap: Ben Greear <greearb@candelatech.com>
2013-04-28 16:45:55 +03:00
Jouni Malinen
5e24dc8a4b Add dup_binstr() to help common binary string tasks
There are quite a few places in the current implementation where a nul
terminated string is generated from binary data. Add a helper function
to simplify the code a bit.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-27 23:44:59 +03:00
Jouni Malinen
2c48211c49 FT RRB: Validate os_malloc() return value before using it
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-27 23:05:15 +03:00
Michael Braun
7ca902b53e Make vlan_file optional if dynamic_vlan is used
My APs generate their configuration on their own using a different
number of (vlan-enabled) bss. Currently, all my vlan_file files consist
of a single line: the wildcard line. Configuration file generation would
be easier, if the hostapd configuration file would not depend on those
simple vlan_file files.

This patch removes the need for those one-line files by using the
<device>.<vlan> naming scheme if no vlan_file is given (or that file is
empty). This should not break any existing setup, as using dynamic_vlan
with no vlan configured does not make sense anyway.

Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2013-04-27 22:53:34 +03:00
Jouni Malinen
cc2ada868e nl80211: Reduce debug on Probe Request frames
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-04-24 01:01:21 +03:00
Johannes Berg
c2aff6b1d1 hostapd: Add some testing options
In order to test clients in scenarios where APs may (randomly)
drop certain management frames, introduce some testing options
into the hostapd configuration that can make it ignore certain
frames. For now, these are probe requests, authentication and
(re)association frames.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-04-23 17:51:28 +03:00
Jouni Malinen
3db5439a5f Optimize Extended Capabilities element to be of minimal length
Leave out zero octets from the end of the element.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 21:58:17 +03:00
Johannes Berg
8cd6b7bce8 hostapd/wpa_s: Use driver's extended capabilities
Some extended capabilities (I'm currently interested in "Operating Mode
Notification" for VHT) are implemented by the kernel driver and exported
in nl80211. Use these in hostapd/wpa_supplicant.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-03-31 21:51:44 +03:00
Jouni Malinen
a679c0f284 WPS: Allow hostapd process to control independent WPS interfaces
The new wps_independent=1 configuration parameter can be used to remove
interfaces from the shared hostapd process WPS control (i.e., to apply
WPS operations only to a subset of interfaces instead of all).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 12:34:35 +03:00
Jouni Malinen
ccdff94035 WPS AP: Add support for reconfiguration with in-memory config
This allows WPS to update AP configuration in the case no hostapd
configuration file is used (i.e., dynamic configuration through the
control interface).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 12:34:35 +03:00
Michael Braun
65a32cdbcb AP: Fix infinite loop in WPA state machine when out of random bytes
When the OS is out of random bytes in SM_STATE(WPA_PTK, AUTHENTICATION2)
in ap/wpa_auth.c, hostapd sends the sm to state DISCONNECT without
clearing ReAuthenticationRequest, resulting in an infinite loop.
Clearing sm->ReAuthenticationRequest using gdb fixes the running hostapd
instance for me. Also sm->Disconnect = TRUE should be used instead of
wpa_sta_disconnect() to make sure that the incomplete ANonce does not
get used.

Fix this issue by resetting sm->ReAuthenticationRequest even if the STA
gets disconnected and use sm->Disconnect instead of
wpa_sta_disconnect().

Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2013-03-30 19:53:22 +02:00
Jouni Malinen
a5f61b2b87 Fix OLBC non-HT AP detection to check channel
A non-HT capable AP on any channel could have triggered us to enable
protection regardless of own operating channel if the driver delivered
Beacon frames from other channels. The channel detection in ap_list is
not exactly ideal, but most cases can be handled by checking ap->channel
against the currently configured channel (or secondary channel in case
of HT40).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 18:05:18 +02:00
Jouni Malinen
69554d78f6 ap_list: Remove unused functions
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 17:06:50 +02:00
Jouni Malinen
08c99cafd2 ap_list: Remove unused iteration list pointers
This iter_next/iter_prev pointers were not really used for anything, so
get rid of the unnecessary complexity in the AP list maintenance.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 17:06:27 +02:00
Jouni Malinen
6b16917f39 ap_list: Remove unused fields
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 16:58:58 +02:00
Jouni Malinen
187f87f04c hostapd: Allow ctrl_iface group to be specified on command line
The new -G<group> command line argument can now be used to set the group
for the control interfaces to enable cases where hostapd is used without
a configuration file and the controlling program is not running with
root user privileges.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 17:09:31 +02:00
Jouni Malinen
b084df8b81 Add vendor_elements into Beacon/Probe Response IE parameters
Commit b52f084cfa introduced a mechanism
for adding arbitrary vendor-specific elements into the Beacon and Probe
Response frames. However, this information was not added to the separate
buffers used for specifying Beacon and Probe Response IEs for drivers
that build the frames internally. Add vendor_elements to these values,
too, to support such drivers in addition to drivers that use the full
Beacon tail/head buffers.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-21 15:41:27 +02:00
Felix Fietkau
ba873c1284 hostapd: Fix client reassociation after disconnect due to ACK failure
Clear WLAN_STA_ASSOC_REQ_OK, otherwise no Class 3 frame will be sent to
the disconnected STA in response to data frames.

Signed-hostap: Felix Fietkau <nbd@openwrt.org>
2013-03-16 12:35:49 +02:00
Johannes Berg
851b73eb28 hostapd: Make VHT IE struct more expressive
The VHT IE struct just has an opaque 8-byte array for the MCS
set, make it more expressive by explicitly naming the pieces.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-03-01 18:24:57 +02:00
Jouni Malinen
d8ed3a075a WPS: Fix OOB Device Password use in PSK1,PSK1 derivation
WSC specification 2.0 section 7.4 describes OOB password to be expressed
in ASCII format (upper case hexdump) instead of raw binary.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-24 10:57:49 +02:00
Jouni Malinen
8dabf4bb46 GAS server: Fix a regression in GAS server callback
Commit 2d9ffe1e85 broke GAS server
callback for receiving Public Action frames. The incorrect context
pointer was used in the public_action_cb2 case. Fix this to use the
correct context pointer.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-16 19:15:05 +02:00
Jouni Malinen
042ec551d4 WPS: Use pre-configured NFC password token instead of overriding it
"WPS_NFC_TOKEN <WPS/NDEF>" used to generate a new NFC password token
regardless of whether there was a pre-configured token in the
configuration. Change this to use the pre-configured value, if
available, instead. This allows the same command to be used to write the
password token to an NFC tag more conveniently.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-15 11:24:29 +02:00
Jouni Malinen
6772a90ad0 WPS: Add command for fetching carrier record for NFC handover
Control interface command "NFC_GET_HANDOVER_SEL NDEF WPS-CR" can now be
used to fetch WPS carrier record from hostapd.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 17:12:55 +02:00
Johannes Berg
3aea5fbe3b hostapd: Do not change HT40 capability due to OBSS scan
The capability itself isn't really affected by an OBSS
scan, only the HT operation must then be restricted to
20 MHz. Change this, and therefore use the secondary
channel configuration to determine the setting of the
OP_MODE_20MHZ_HT_STA_ASSOCED flag.

This shouldn't really change anything functionally,
it just makes the code a little less confusing and
is also needed to implement more dynamic bandwidth
changes if ever desired.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-02-09 12:16:58 +02:00
Raja Mani
3140803b6d nl80211: Add ctrl_iface message for AP mode connection rejection
When AP mode operation reject the client, nl80211 layer advertises the
connect failed event with the reason for failures (for example, max
client reached, etc.) using NL80211_CMD_CONN_FAILED.

This patch adds some debug messages whenever such an event is received
from the nl80211 layer and also the same event is posted to the upper
layer via wpa_msg().

Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
2013-02-07 15:24:53 +02:00
Jouni Malinen
2d9ffe1e85 P2P: Fix Action frame processing if Interworking is enabled
GAS server used the same public_action_cb mechanism as P2P to process
Action frames. This ended up overriding P2P processing of Action frames
while running an AP/GO interface with a build that enables Interworking
(e.g., for Hotspot 2.0) and a driver that uses hostapd for AP mode
SME/MLME. Fix this by adding a separate callback registration for the
GAS server. This should really be cleaned up by supporting arbitrary
number of callback handlers, but for now, this addresses the regression
with a minimal change.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-04 15:38:35 +02:00
Jouni Malinen
edbd2a191e Move cipher suite selection into common helper functions
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 16:58:54 +02:00
Jouni Malinen
b4fd3613d3 SAE: Free temporary buffers when moving to Accepted state
Most of the variables are not needed anymore once the SAE instance
has entered Accepted state. Free these to save memory.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:54 +02:00
Jouni Malinen
6917c9e829 Allow AP mode deauth/disassoc reason code to be overridden
The optional "reason=<reason code>" parameter to the ctrl_iface
deauthenticate and disassociate commands can now be used to change the
reason code used in the disconnection frame. This can be used, e.g., by
P2P GO to disconnect a single P2P client from the group by sending it an
indication of the group getting terminated (Deauthentication frame with
reason code 3). It needs to be noted that the peer device is still in
possession on the PSK, so it can still reconnect to the group after this
if it does not follow the group termination indication.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-01-12 17:51:54 +02:00
Jouni Malinen
5bfc46bb55 Extra validation to keep static analyzers happy
Use of two variables to track bounds checking seems to be a bit too much
for some static analyzers, so add an extra condition for buffer padding
to avoid incorrect warnings.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:53 +02:00
Jouni Malinen
559cdabb0f Use more explicit way of copying pointer value to a buffer
The code initializing GMK Counter uses the group pointer value as extra
entropy and to distinguish different group instances. Some static
analyzers complain about the sizeof(pointer) with memcpy, so use a more
explicit type casting to make it more obvious what the code is doing.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:53 +02:00
Jouni Malinen
a50414c322 SAE: Check random_get_bytes() return value
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:53 +02:00
Jouni Malinen
625f202a74 SAE: Allow enabled groups to be configured
hostapd.conf sae_groups parameter can now be used to limit the set of
groups that the AP allows for SAE. Similarly, sae_groups parameter is
wpa_supplicant.conf can be used to set the preferred order of groups. By
default, all implemented groups are enabled.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:53 +02:00
Jouni Malinen
a46d72d7d7 SAE: Maintain EC group context in struct sae_data
This can be used to share same EC group context through the SAE
exchange.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:52 +02:00
Jouni Malinen
d136c376f2 SAE: Add support for Anti-Clogging mechanism
hostapd can now be configured to use anti-clogging mechanism based on
the new sae_anti_clogging_threshold parameter (which is
dot11RSNASAEAntiCloggingThreshold in the standard). The token is
generated using a temporary key and the peer station's MAC address.
wpa_supplicant will re-try SAE authentication with the token included if
commit message is rejected with a token request.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:52 +02:00
Jouni Malinen
dd43026a19 SAE: Rename state variables to match IEEE 802.11 standard
The enum values for struct sae_data::state now match the protocol
instance states as defined in IEEE Std 802.11-2012, 11.3.8.2.2

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:52 +02:00
Jouni Malinen
47b55a3ef5 SAE: Use PMK in 4-way handshake
Use the PMK that is derived as part of the SAE authentication in the
4-way handshake instead of the PSK.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:52 +02:00
Jouni Malinen
f2e9818f73 SAE: Add processing of the confirm message
This adds validation of the received confirm messages for SAE.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:52 +02:00
Jouni Malinen
fb8fcc2950 SAE: Add generation of the confirm message fields
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:52 +02:00
Jouni Malinen
146f6c9a00 SAE: Add processing of the commit message
This adds validation of the received commit messages and key derivation
for SAE.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:52 +02:00
Jouni Malinen
8e31e9550a SAE: Add generation of the commit message fields
This adds derivation of PWE and the needed commit values so that the
full SAE commit message can be built.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:52 +02:00
Jouni Malinen
750efe6ea6 SAE: Move related operations next to each other
There is no need to keep the two SAE steps separated from each other.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:52 +02:00
Jouni Malinen
98efcc4176 SAE: Use a shared data structure for AP and station
This makes it easier to share common functions for both roles.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:52 +02:00
Johannes Berg
a9a1d0f08a hostapd: Pass VHT capabilities to driver wrapper
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-01-12 17:51:52 +02:00
Johannes Berg
fa4763369a hostapd: Allow configuring driver to VHT
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-01-12 17:51:52 +02:00
Jouni Malinen
2e8483bf12 Fix authenticator PMKSA cache expiration timer setup
The PMKSA cache expiration timer was not actually ever initialized since
the only place for registering the timeout was in the timeout handler.
Fix this by initializing the timer whenever a new PMKSA cache entry is
added to the beginning of the list (i.e., when it was the first entry or
expires before the entry that was previously going to expire first).
[Bug 393]

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:21:50 +02:00
Jouni Malinen
af220315e6 Fix EAPOL frame sending to non-QoS STAs
Commit 4378fc14eb started using QoS Data
frames for QoS STAs. It used the correct flags value for WPA/RSN
EAPOL-Key frames, but wrong flags for IEEE 802.1X EAPOL frames. The
WPA_STA_WMM value used in driver_nl80211.c happens to be identical to
WLAN_STA_ASSOC in sta->flags and this makes driver_nl80211.c try to use
QoS header for all STAs. Fix this by properly converting the flags from
WLAN_STA_* to WPA_STA_*. [Bug 426]

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:01:54 +02:00
Jouni Malinen
2049a875bc WNM: Additional BSS Transition Management capability
Add some more functionality for BSS Transition Management:
- advertise support for BSS Transition Management in extended
  capabilities element
- add hostapd.conf parameter bss_transition=1 for enabling support
  for BSS Transition Management
- add "hostapd_cli disassoc_imminent <STA> <num TBTTs>" for sending
  disassociation imminent notifications for testing purposes
- wpa_supplicant: trigger a new scan to find another BSS if the
  current AP indicates disassociation imminent (TODO: the old AP needs
  to be marked to use lower priority to avoid re-selecting it)

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-22 20:27:30 +02:00
Jouni Malinen
8b24861154 Add Acct-Session-Id into Access-Request messages
This optional attribute may make it easier to bind together the
Access-Request and Accounting-Request messages. The accounting session
identifier is now generated when the STA associates instead of waiting
for the actual session to start after successfull authentication.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-18 18:13:31 +02:00
Vladimir Kondratiev
7829894c21 Introduce 60 GHz band
Basic support for the 60 GHz band. Neither P2P nor WPS are yet taken
care off. Allows to start AP with very simple config:

network={
        ssid="test"
        mode=2
        frequency=60480
        key_mgmt=NONE
}

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-12-18 11:50:35 +02:00
Sven Eckelmann
f1b44874c2 Fix initialization of ap_table_{max_size,expiration_time}
The config says that the default for ap_table_max_size is 255 and the
default for ap_table_expiration_time is 60. But the code doesn't reflect
the default values mentioned in the sample config file.

These variables completely disable the code for Overlapping Legacy BSS
Condition by default when they are not correctly initialized. WFA
certification requires this feature and therefore an AP would have
failed the certification process unless they were initialized manually
using the configuration file.

Signed-hostap: Sven Eckelmann <sven@open-mesh.com>
Signed-hostap: Simon Wunderlich <simon@open-mesh.com>
2012-12-17 17:54:21 +02:00
Jouni Malinen
cd6be5c246 WPS: Use wps_rf_bands parameter to determine dualband functionality
If separate hostapd processes are used for different RF bands, the
dualband parameter for WPS was not set correctly. Allow dualband
indication (mainly, addition of RF bands attribute for PBC session
overlap detection) also based on wps_rf_bands value (if set to "ag").

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-17 16:06:10 +02:00
Jouni Malinen
0a66ce3c49 WNM: Add support for SSID List element matching
This allows Probe Request frame processing to compare the configured
SSID to the SSID List element in addition to the SSID element.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-16 21:22:24 +02:00
Jouni Malinen
b93c8509cc Add support for advertising UTF-8 SSID extended capability
This field can be used to indicate that UTF-8 encoding is used in the
SSID field.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-16 20:46:51 +02:00
Jouni Malinen
a8e93a1a01 WNM: Skip os_memcpy in wnmtfs_ie is NULL
It is cleaner to skip the memcpy call instead of trusting on the
length parameter being 0 in this case.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-16 19:48:39 +02:00
Jouni Malinen
835822d404 WNM: Fix GTK/IGTK encoding in WNM-Sleep Mode Exit frame
These subelements do not use AES key wrap (MFP is used instead).

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-16 19:46:10 +02:00
Jouni Malinen
4da10640a7 WNM: Fix AP logic on when to include GTK/IGTK in WNM-Sleep Mode exit
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-16 19:27:09 +02:00
Jouni Malinen
615a5d559d WNM: Use defined macros for WNM-Sleep Mode Action Type values (AP)
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-16 19:24:06 +02:00