Commit graph

2130 commits

Author SHA1 Message Date
Jouni Malinen
b5aebee49e Fixed dbus build without OpenSSL. 2008-06-02 18:45:45 +03:00
Jouni Malinen
ec717917e5 Fixed build without CONFIG_IEEE8021X_EAPOL, but with CONFIG_CTRL_IFACE 2008-05-30 18:43:06 +03:00
Jouni Malinen
1b52ea47e4 Added fragmentation support for EAP-TNC 2008-05-26 12:00:18 +03:00
Jouni Malinen
d9521c7438 Example configuration for EAP-TLS authentication using PKCS#11 TPM token 2008-05-23 19:41:05 +03:00
David Smith
61ee0f71bb Add support to wpa_supplicant configuring eap_peer for client cert and CA
cert on smartcard, plus handling phase2 auth with smartcard same as phase1.
2008-05-23 10:55:30 +03:00
David Smith
e403be0b12 Add setSmartcardModules DBus message to set pkcs11 and opensc options
This will be used by most importantly network manager to set smartcard
options at run time.
2008-04-28 17:15:56 +03:00
Henrik Brix Andersen
a6a89fea36 Fix compilation without IEEE8021X_EAPOL defined 2008-04-28 17:06:43 +03:00
Jouni Malinen
fe2b7dda02 Fixed fallback to full handshake when server rejects PAC-Opaque
The TLS client changes in ssl3_get_server_hello() were based on the
pre-RFC 5077 version of OpenSSL and they hardcoded s->hit to 1 in case
PAC-Opaque was used. This prevented fallback to full TLS handshake in case
the server rejected PAC-Opaque in ClientHello. The fixed version simplifies
ssl3_get_server_hello() and uses the new RFC 5077 functionality in OpenSSL
(ssl3_check_finished) to allow the state machine handle start of
abbreviated handshake based on the used ticket.
2008-04-15 17:24:06 +03:00
Jouni Malinen
d6888f9e37 PEAPv0: Added crypto_binding configuration option (part of phase1)
crypto_binding=# in phase1 network parameter can now be used to change the
PEAPv0 cryptobinding behavior (0 = do not use, 1 = optional (default),
2 = required).
2008-04-08 14:57:39 +03:00
Kel Modderman
0e5776f673 Remove the -w option from help output
Signed-off-by: Kel Modderman <kel@otaku42.de>
2008-03-31 11:51:49 +03:00
Kel Modderman
7da6794022 Explain not all driver backends will be compiled into wpa_supplicant binary
Explain that wpa_supplicant supports a variety of drivers, but only a
subset of them are chosen at compile time.

Signed-off-by: Kel Modderman <kel@otaku42.de>
2008-03-31 11:49:55 +03:00
Tomasz Wolniewicz
c454f57379 eapol_test: Allow client IP address to be specified
Allow the user to set the IP address of the eapol_test client. This if
very useful when you have a machine with many interfaces and want to use a
particular one for testing RADIUS connectivity. For instance when I run the
national eduroam proxy I can only connect to other server from a particular
address, an our machine happens to have several IPs. So if I want to run
connectivity tests, I must make sure that my test uses a particular
interface. The -A option allows one to set this).

(jm: cleaned up to use radius configuration structure instead of global
variable for the address and added IPv6 support)
2008-03-30 18:15:52 +03:00
Tomasz Wolniewicz
1e4b9da10c Chargeable-User-Identity (RFC 4372) in eapol_test
Implements the Chargable-User-Identity (CUI), as defined in RFC 4372.
Option "-i" causes the eapol_test to send a NUL CUI - which is a request to
send a CUI back. Capital "-I" allows to specify the value of the CUI.
This has been defined for cases where the client wants to reauthenticate.
2008-03-30 17:39:19 +03:00
Jouni Malinen
e7d8003358 EAP-PEAP: Fixed interop issues in key derivation with cryptobinding
It looks like Microsoft implementation does not match with their
specification as far as PRF+ label usage is concerned.. IPMK|CMK is derived
without null termination on the label, but the label for CSK derivation
must be null terminated.

This allows cryptobinding to be used with PEAPv0 in a way that
interoperates with Windows XP SP3 (RC2) and as such, this functionality is
now enabled as an optional addition to PEAPv0.
2008-03-19 16:58:06 +02:00
Jouni Malinen
0ac0e4df1c EAP-PEAP: Moved EAP-TLV processing into eap_peap.c
EAP-PEAP was the only method that used the external eap_tlv.c peer
implementation. This worked fine just for the simple protected result
notification, but extending the TLV support for cryptobinding etc. is not
trivial with such separation. With the TLV processing integrated into
eap_peap.c, all the needed information is now available for using
additional TLVs.
2008-03-18 11:26:17 +02:00
Masakazu Mokuno
b5a357b476 Add support for PS3 Linux wireless driver
This adds support for PS3 wireless to wpa_supplicant.

Although PS3 wireless driver is designed to conform the WEXT standard
as much as possible, unfortunately the wext driver wrapper of
wpa_supplicant can not support PS3 wireless fully because:

 - PS3 wireless driver uses private WEXT ioctls for accepting PSK of
   WPA-Personal from the userland.
   WEXT does not specify the way to do it.

 - The association and 4-way handshake are done by PS3 virtual
   wireless device. The guest OSes can not interfere it.

 - No EAPOL frames are allowed to go outside of the
   hypervisor/firmware nor come from. They are eaten by the firmware.

Thus I needed to make a new driver wrapper for PS3 wireless.

This patch can be applied against the latest 0.6.x tree.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
2008-03-13 19:00:37 +02:00
Jouni Malinen
658d166297 FT: Use correct BSSID when deriving PTK and verifying MIC
The old version was using struct wpa_sm::bssid which is not necessarily
updated to point to the correct target address when doing over-the-air FT
since the address is used before the association has actually been
completed.
2008-03-12 11:20:20 +02:00
Ryan Hill
748e54937d The attached patch fixes a few build errors when compiling with GCC 4.3,
caused by a few missing header includes. It was done against 0.5.8, but
still applies to 0.5.10.
2008-03-12 09:39:25 +02:00
Jouni Malinen
502a293e30 TNC: Added TNC server support into documentation and ChangeLogs 2008-03-09 12:14:15 +02:00
Jouni Malinen
4f1c561725 TNC: Added support for using TNC with EAP-FAST 2008-03-09 11:21:01 +02:00
Jouni Malinen
8e888179e1 Make the "invalid group" error show up with default verbosity level 2008-03-06 22:49:46 +02:00
Dan Williams
d113aa91ca Fix qt3 wpa_gui build
When a WpaMsg item to the QValueList WpaMsgList, there's no constructor
that the QValueList can call.  This is a port of the fix from the stable
branch where it builds fine.
2008-03-05 18:30:01 +02:00
Dan Williams
cf7a576f67 Fix potential use-after-free in dbus byte array demarshaling code
The byte array code should be clearing its own pointer, not the string
array pointer.
2008-03-05 16:15:10 +02:00
Jouni Malinen
9474b3a4e4 Added a missing '#' to indicate a comment. 2008-03-05 16:06:43 +02:00
Jouni Malinen
c673c5fc0f Renamed local DBUS_VERSION define to avoid conflict with dbus 1.1 headers 2008-03-05 16:05:26 +02:00
Jouni Malinen
7914585fe0 EAP-FAST: Cleaned up TLV processing and added support for EAP Sequences
Number of TLVs were processed in groups and these cases were now separated
into more flexible processing of one TLV at the time. wpabuf_concat()
function was added to make it easier to concatenate TLVs. EAP Sequences are
now supported in both server and peer code, but the server side is not
enabled by default.
2008-02-27 17:59:34 -08:00
Jouni Malinen
a4819630f6 EAP-FAST: Added shared helper functions for building TLVs 2008-02-27 17:56:30 -08:00
Kel Modderman
eff06a7cdb Enhance manpage with use of emphasis instead of strong quote
The Debian package checker "lintian" was making noise about
wpa_supplicant.conf(5). It was caused by a line beginning with ', which is
apparently not liked by man(1).

I suggest the use of <emphasis>word</emphasis> where 'word' is used at the
moment.

Signed-off-by: Kel Modderman <kel@otaku42.de>
2008-02-27 17:48:23 -08:00
Jouni Malinen
3b46a31ec7 Added files that cg-init excluded 2008-02-27 17:36:06 -08:00
Jouni Malinen
6fc6879bd5 Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release 2008-02-27 17:34:43 -08:00