Commit graph

595 commits

Author SHA1 Message Date
Jouni Malinen
51e2a27a21 hostapd_driver_ops reduction
set_sta_vlan, get_inact_sec, sta_deauth, sta_disassoc, and sta_remove
to use inline functions instead of extra abstraction.
2010-11-24 15:36:02 +02:00
Jouni Malinen
bbb921daaa Maintain internal entropy pool for augmenting random number generation
By default, make hostapd and wpa_supplicant maintain an internal
entropy pool that is fed with following information:

hostapd:
- Probe Request frames (timing, RSSI)
- Association events (timing)
- SNonce from Supplicants

wpa_supplicant:
- Scan results (timing, signal/noise)
- Association events (timing)

The internal pool is used to augment the random numbers generated
with the OS mechanism (os_get_random()). While the internal
implementation is not expected to be very strong due to limited
amount of generic (non-platform specific) information to feed the
pool, this may strengthen key derivation on some devices that are
not configured to provide strong random numbers through
os_get_random() (e.g., /dev/urandom on Linux/BSD).

This new mechanism is not supposed to replace proper OS provided
random number generation mechanism. The OS mechanism needs to be
initialized properly (e.g., hw random number generator,
maintaining entropy pool over reboots, etc.) for any of the
security assumptions to hold.

If the os_get_random() is known to provide strong ramdom data (e.g., on
Linux/BSD, the board in question is known to have reliable source of
random data from /dev/urandom), the internal hostapd random pool can be
disabled. This will save some in binary size and CPU use. However, this
should only be considered for builds that are known to be used on
devices that meet the requirements described above. The internal pool
is disabled by adding CONFIG_NO_RANDOM_POOL=y to the .config file.
2010-11-24 01:29:40 +02:00
Jouni Malinen
e5851439e3 Fix hlr_auc_gw build with CONFIG_WPA_TRACE=y 2010-11-24 01:10:48 +02:00
Jouni Malinen
3642c4313a Annotate places depending on strong random numbers
This commit adds a new wrapper, random_get_bytes(), that is currently
defined to use os_get_random() as is. The places using
random_get_bytes() depend on the returned value being strong random
number, i.e., something that is infeasible for external device to
figure out. These values are used either directly as a key or as
nonces/challenges that are used as input for key derivation or
authentication.

The remaining direct uses of os_get_random() do not need as strong
random numbers to function correctly.
2010-11-24 01:05:20 +02:00
Jouni Malinen
5bf49c346c Drop local stations on broadcast deauth/disassoc request
When hostapd_cli deauth/disassoc is used with ff:ff:ff:ff:ff:ff
address, drop all local STA entries in addition to sending out the
broadcast deauth/disassoc frame.
2010-11-10 17:09:31 +02:00
Jouni Malinen
1b6dbec626 Fix a typo in the comment 2010-11-10 14:23:57 +02:00
Yogesh Ashok Powar
6950b2caa8 hostapd: Prohibit WEP configuration when HT is enabled
WFA 11n testing does not allow WEP when IEEE 802.11n is enabled.
Reject such combination when parsing hostapd configuration file.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
2010-11-09 16:49:03 +02:00
Helmut Schaa
f5798bf36a hostapd: Add comment about CONFIG_FULL_DYNAMIC_VLAN to defconfig
Add comment about CONFIG_FULL_DYNAMIC_VLAN to defconfig. By default
this feature is still disabled.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
2010-11-09 16:38:59 +02:00
Felix Fietkau
d3b4286967 Allow client isolation to be configured (ap_isolate=1)
Client isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging is
allowed.
2010-11-09 16:27:15 +02:00
Felix Fietkau
d38ae2ea85 Add bridge handling for WDS STA interfaces
By default, add them to the configured bridge of the AP interface
(if present), but allow the user to specify a separate bridge.
2010-11-09 16:12:42 +02:00
Jouni Malinen
7e3c178142 Remove unused TX queue parameters related to Beacon frames
These are not used by any driver wrapper, i.e., only the four
data queues (BK, BE, VI, VO) are configurable. Better remove these
so that there is no confusion about being able to configure
something additional.
2010-11-05 01:23:17 +02:00
Jouni Malinen
acec8d3203 Add ctrl_iface command 'GET version'
This can be used to fetch the wpa_supplicant/hostapd version
string.
2010-10-31 17:07:31 +02:00
Dmitry Shmidt
ae6e1bee67 Add WPA_IGNORE_CONFIG_ERRORS option to continue in case of bad config
This is an option to continue with wpa_supplicant and hostapd even if
config file has errors. The problem is that these daemons are the best
"candidates" for the config change, so if they can not start because
config file was let's say corrupted, you can not fix it easily.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2010-10-31 12:38:49 +02:00
Jouni Malinen
450eddcfae hostapd: Add wps_config ctrl_interface command for configuring AP
This command can be used to configure the AP using the internal
WPS registrar. It works in the same way as new AP settings received
from an ER.
2010-10-21 16:49:41 +03:00
Jouni Malinen
2c8a4eef41 WPS: Update Beacon/ProbeResp IE on wps_version_number changes
This test command is supposed to change the WPS version number in all
places immediately, so make sure that the IEs used in management
frames get updated immediately.
2010-10-19 19:57:01 +03:00
Jouni Malinen
dce044cce5 P2P: Extend P2P manager functionality to work with driver MLME
Add P2P IE into Beacon, Probe Response, and (Re)Association Request
frames for drivers that generate this frames internally.
2010-10-08 18:16:07 +03:00
Jouni Malinen
088a225586 Fix hostapd_cli get_config not to show key when WPA is disabled
Previously, incorrectly configured passphrase or group cipher type
could be shown even if WPA was disabled.
2010-10-08 17:36:52 +03:00
Jouni Malinen
01cf713e51 Fix .gitignore files to not ignore subdirectory matches
The previous used .gitignore files were mathing some files that
were actually already in the repository (e.g.,
hostapd/logwatch/hostapd). Avoid this by listing the conflicting
entries in the root directory .gitignore with full path.
2010-10-07 11:04:16 +03:00
Jouni Malinen
235f69fcd6 Mark ctrl_iface RX debug for PING commands excessive
This cleans up debug log from unnecessary entries when using
wpa_cli/hostapd_cli or other ctrl_iface monitors that PING
periodically to check connectivity.
2010-09-24 15:50:13 -07:00
Jouni Malinen
f61039c75f WPS 2.0: Disable WPS if ignore_broadcast_ssid or WEP is used
These combinations are disallowed in WPS 2.0 (and do not work well
(or at all) with many deployed WPS 1.0 devices either).
2010-09-24 15:17:03 -07:00
Jouni Malinen
403b96fe4f WPS: Add hostapd_cli get_config command
This can be used by a WPS UI to display the current AP configuration.
2010-09-23 12:02:28 -07:00
Jouni Malinen
3981cb3cb8 WPS: Add wps_check_pin command for processing PIN from user input
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
2010-09-23 10:30:52 -07:00
Jouni Malinen
b4e34f2fdf WPS: Make testing operations configurable at runtime
Instead of build time options (CONFIG_WPS_TESTING_EXTRA_CRED and
CONFIG_WPS_EXTENSIBILITY_TESTING), use a single build option
(CONFIG_WPS_TESTING) and runtime configuration of which testing
operations are enabled. This allows a single binary to be used
for various tests.

The runtime configuration can be done through control interface
with wpa_cli/hostapd_cli commands:
Enable extensibility tests:
set wps_version_number 0x57
Disable extensibility tests (WPS2 build):
set wps_version_number 0x20
Enable extra credential tests:
set wps_testing_dummy_cred 1
Disable extra credential tests:
set wps_testing_dummy_cred 0
2010-09-21 19:51:23 -07:00
Dan Harkins
df684d82ff EAP-pwd: Add support for EAP-pwd server and peer functionality
This adds an initial EAP-pwd (RFC 5931) implementation. For now,
this requires OpenSSL.
2010-09-14 21:51:40 -10:00
Jouni Malinen
31fd64cc2f P2P: Add forgotten allow_cross_connection example 2010-09-09 07:17:20 -07:00
Jouni Malinen
962473c136 P2P: Add preliminary P2P Manager AP support for hostapd 2010-09-09 07:17:18 -07:00
Jouni Malinen
cae67937ca WPS: Fix CONFIG_WPS_STRICT build option
This was not supposed to be depending on CONFIG_WPS_NFC.
2010-09-09 06:07:49 -07:00
Jouni Malinen
53587ec183 WPS 2.0: Make WSC 2.0 support to be build option (CONFIG_WPS2)
For now, the default build will only include WSC 1.0 support.
CONFIG_WPS2=y can be used to add support for WSC 2.0.
2010-09-09 06:07:48 -07:00
Jouni Malinen
54f489be45 WPS 2.0: Validate WPS attributes in management frames and WSC messages
If CONFIG_WPS_STRICT is set, validate WPS IE(s) in management frames and
reject the frames if any of the mandatory attributes is missing or if an
included attribute uses an invalid value. In addition, verify that all
mandatory attributes are included and have valid values in the WSC
messages.
2010-09-09 06:07:48 -07:00
Jouni Malinen
6a857074f4 WPS 2.0: Add virtual/physical display and pushbutton config methods 2010-09-09 06:07:47 -07:00
Jouni Malinen
31fcea931d WPS 2.0: Add support for AuthorizedMACs attribute
Advertize list of authorized enrollee MAC addresses in Beacon and
Probe Response frames and use these when selecting the AP. In order
to provide the list, the enrollee MAC address should be specified
whenever adding a new PIN. In addition, add UUID-R into
SetSelectedRegistrar action to make it potentially easier for an AP
to figure out which ER sent the action should there be multiple ERs
using the same IP address.
2010-09-09 06:07:47 -07:00
Jouni Malinen
b070460b1a Fix hostapd build with CONFIG_IEEE80211N but without NEED_AP_MLME 2010-09-05 12:41:15 +03:00
Jouni Malinen
5a1cc30f1a WPS: Add support for dynamic AP PIN management
A new hostapd_cli command, wps_ap_pin, can now be used to manage
AP PIN at runtime. This can be used to generate a random AP PIN and
to only enable the AP PIN for short period (e.g., based on user
action on the AP device). Use of random AP PIN that is only enabled
for short duration is highly recommended to avoid security issues
with a static AP PIN.
2010-08-24 16:35:37 +03:00
Jouni Malinen
7f6ec672ea EAP server: Add support for configuring fragment size 2010-07-20 22:56:10 -07:00
Jouni Malinen
a33c5f96b8 Fix a typo in Disassociation frame building
This did not really change any behavior since Deauthentication frame
uses the same format.
2010-07-17 20:23:20 -07:00
Jouni Malinen
be48214d2b Preparations for 0.7.2 release 2010-04-18 18:02:34 +03:00
Jouni Malinen
125c74cd80 WPS: Include CONFIG_EAP automatically if WPS is enabled 2010-04-17 22:05:18 +03:00
Masashi Honma
5008cb5e55 Support for Solaris default shell restriction
Some shells (like Solaris default /bin/sh) doesn't allow -e
option for file existence check. Use -f instead.
2010-04-17 17:15:23 +03:00
Jouni Malinen
488d0934ab hostapd_cli: Add deauth/disassoc commands to usage help 2010-04-11 21:00:16 +03:00
Yogesh Ashok Powar
721abef9b3 Allow advertising of U-APSD functionality in Beacon
hostapd does not implement UAPSD functionality. However, if U-APSD
functionality is implemented outside hostapd, add support to advertise
the functionality in beacon.

Signed-off-by: yogeshp@marvell.com
2010-04-11 11:32:15 +03:00
Jouni Malinen
b242d398f8 Use more os.h wrapper functions in hostapd_cli 2010-04-07 11:40:34 +03:00
Gregory Detal
bae9217474 Add support for action scripts in hostapd_cli 2010-04-07 11:14:54 +03:00
Gregory Detal
bb437f282b AP: Add wpa_msg() events for EAP server state machine 2010-04-07 11:13:14 +03:00
Michael Buesch
2c657c8dcd hostapd: Use cp -f in make install
If hostapd is running, a make install fails with
cp: cannot create regular file `/usr/local/bin/hostapd': Text file busy

Use cp -f to avoid this error and force-override the file.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
2010-04-06 17:12:17 +03:00
Jouni Malinen
b91ab76e8c Add test commands for sending deauth/disassoc without dropping state
This can be used to test 802.11w by sending a protected or unprotected
deauth/disassoc frame.

hostapd_cli deauth <dst addr> test=<0/1>
hostapd_cli disassoc <dst addr> test=<0/1>

test=0: unprotected
test=1: protected
2010-03-29 12:01:40 -07:00
Jouni Malinen
90a3206a14 Add deauthenticate/disassociate ctrl_iface commands 2010-03-29 11:14:57 -07:00
Jouni Malinen
921a278604 Fix a typo in r1kh config parameter description
The second item on the line is R1KH-ID, not R0KH-ID.
2010-03-07 21:16:42 +02:00
Jouni Malinen
23e2550c0e Remove unneeded CONFIG_EAP comments
These are not needed for WPS builds since CONFIG_WPS=y enables all
the needed EAP components.
2010-03-06 16:40:53 +02:00
Jouni Malinen
94d9bfd59b Rename EAP server source files to avoid duplicate names
This makes it easier to build both EAP peer and server functionality
into the same project with some toolchains.
2010-02-19 18:54:07 +02:00
Jouni Malinen
dff0f701d0 Preparations for v0.7.1 release 2010-01-16 19:04:38 +02:00