Commit graph

35 commits

Author SHA1 Message Date
Jouni Malinen
b586054f95 tests: Work around cfg80211 reg.c intersection (country 98) issues
The Linux kernel commit 113f3aaa81bd ("cfg80211: Prevent regulatory
restore during STA disconnect in concurrent interfaces") broke the
regulatory clearing attempt in many test cases since
cfg80211_is_all_idle() is now returning false due to the AP interface
being up and that results in the Country IE -based regulatory
information not getting cleared back to defaults.

Work around this by stopping the AP interface first so that when the
station interface receives the disconnection, there are no other active
interfaces in the system. In addition, wait for REGDOM event for the
Country IE hint after association to avoid disconnection before the
regulatory events have been fully processed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-23 17:25:11 +02:00
Jouni Malinen
392aba4e87 tests: Radio measurement capability with roaming
This verifies that radio measurement capabilities are negotiated
correctly for the reassociation cases with and without FT.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-01 22:02:55 +02:00
Li Zhijian
783bf87144 tests: Fix missing function on some rrm test case error paths
Import vht_supported from test_ap_vht to fix the following issue:

rrm_beacon_req_table_vht run failed: global name 'vht_supported' is not defined

Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
2017-09-10 21:54:38 +03:00
Andrei Otcheretianski
cdb3aab569 tests: Fix RRM tests to allow refused/incapable responses
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2017-07-17 18:04:00 +03:00
Jouni Malinen
d557183150 tests: Rejection of group-addressed RRM measurement request
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-07-17 17:47:25 +03:00
Avraham Stern
ae2f1a9c0f tests: Make beacon report tests remote compatible
Use the new hostapd.add_ap() API (i.e., pass the ap device as a
parameter instead of the interface name) in beacon report tests to
make them remote compatible, and mark them appropriately.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2017-03-06 23:55:32 +02:00
Jouni Malinen
6dbfefb9b4 tests: Additional RRM testing coverage for hostapd
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-10 19:48:12 +02:00
Jouni Malinen
0d46095ec8 tests: Skip rrm_link_measurement tests if kernel support is not available
rrm_link_measurement and rrm_link_measurement_oom test cases were
causing incorrect failures when executed with a kernel version that does
not modify mac80211_hwsim to support TX power insertion. Fix this by
checking for that capability and skipping the test cases if the kernel
does not support this.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-29 01:32:25 +02:00
Jouni Malinen
eaccab264d tests: LCI report generation and os_get_reltime() failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 22:16:24 +02:00
Jouni Malinen
18d1b41b5c tests: Radio measurement request - link measurement
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 18:46:57 +02:00
Jouni Malinen
332a685a4b tests: Radio/link measurement request for non-RRM association
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 18:00:50 +02:00
Jouni Malinen
4062f697d8 tests: Radio measurement request - OOM while rejecting a request
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 17:52:51 +02:00
Jouni Malinen
4b2bc05377 tests: Fix rrm_beacon_req_passive_ap_channels to use passive scan
The request from the AP was encoded incorrectly for this test case and
an active scan was requested instead of the passive one that was
supposed to be used here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 17:47:12 +02:00
Jouni Malinen
2f7b4bb578 tests: Beacon request - active scan mode os_get_random failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 17:46:18 +02:00
Jouni Malinen
073167de7b tests: Check rrm capabilities with a helper function
And also move couple of these checks to the beginning of the test case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 13:39:49 +02:00
Jouni Malinen
317c19c5aa tests: Remove write-only bssid assignments from rrm test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 13:34:19 +02:00
Jouni Malinen
7972d88a29 tests: Beacon request - passive scan mode - VHT
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 12:50:35 +02:00
Jouni Malinen
64dbe6a78d tests: Prepare rrm_beacon_req_passive_no_match_oom for code change
Replace the TEST_ALLOC function wpas_beacon_rep_no_results with an
earlier function in the backtrace and wpabuf_resize() in preparation to
a code change that allows the compiler to optimize out
wpas_beacon_rep_no_results().

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 12:12:22 +02:00
Jouni Malinen
6c7a7c7996 tests: Beacon request - active scan mode and old scan result
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-03 19:53:03 +02:00
Jouni Malinen
28b32e66d8 tests: Beacon request - passive scan mode and no matching BSS
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-03 19:53:03 +02:00
Jouni Malinen
1edc31904a tests: Beacon request - active scan mode and many BSSs
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-03 19:53:03 +02:00
Jouni Malinen
618073aa2e tests: LCI report generation OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-03 19:53:03 +02:00
Jouni Malinen
b157f0e265 tests: wpa_supplicant and concurrent NEIGHBOR_REP_REQUEST commands
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-03 19:53:03 +02:00
Jouni Malinen
b865987571 tests: NEIGHBOR_REP_REQUEST for AP not supporting neighbor report
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-03 19:53:03 +02:00
Jouni Malinen
fc22c9cfba tests: wpa_supplicant and disconnection during NEIGHBOR_REP_REQUEST
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-03 19:53:03 +02:00
Jouni Malinen
1c2bfe9984 tests: wpa_supplicant ctrl_iface NEIGHBOR_REP_REQUEST OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-03 19:53:03 +02:00
Jouni Malinen
e24a155ee4 tests: wpa_supplicant behavior on NEIGHBOR_REP_REQUEST response timeout
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-03 19:53:03 +02:00
Jouni Malinen
eee09ebb4f tests: Radio measurement request - protocol testing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-03 19:53:03 +02:00
Jouni Malinen
0f2e07cf47 tests: RRM beacon report with active and passive scan
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-03 19:53:03 +02:00
Jouni Malinen
42b0982376 tests: Beacon request - beacon table mode
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-03 17:51:01 +02:00
Jouni Malinen
d620ae2f54 tests: More SET_NEIGHBOR and REMOVE_NEIGHBOR error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-28 14:31:43 +02:00
Jouni Malinen
d8fae7bc12 tests: More hostapd REQ_RANGE error case coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-28 14:31:42 +02:00
Jouni Malinen
baa8f5ba26 tests: hostapd stationary_ap=1 in neighbor DB
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-10-29 19:25:39 +03:00
Jouni Malinen
30ee6cc436 tests: FTM capability indication
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-05 21:43:36 +03:00
David Spinadel
51269b386a tests: Add RRM tests
1. Add tests for hostapd neighbor database and neighbor report and
   request. Remove the partial neighbor report request test from
   test_wpas_ctrl.py since they are now covered more completely in
   test_rrm.py.
2. Add LCI request test.
3. Add FTM range request signaling test. This covers only the control
   interface commands and measurement request/response exchange for now.
   Full end-to-end functionality requires support of station reporting
   RRM capability.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-17 18:32:18 +03:00