Commit graph

699 commits

Author SHA1 Message Date
Alexander Wetzel
8ca6f924d6 STA: Fix wpa_clear_keys() PTK key deletion logic
We have to delete PTK keys when either BIT(0) or BIT(15) are zero and
not only when both are zero.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-03-26 00:33:17 +02:00
Alexander Wetzel
b17b7a8e53 STA: Support Extended Key ID
Support Extended Key ID in wpa_supplicant according to
IEEE Std 802.11-2016 for infrastructure (AP) associations.

Extended Key ID allows to rekey pairwise keys without the otherwise
unavoidable MPDU losses on a busy link. The standard is fully backward
compatible, allowing STAs to also connect to APs not supporting it.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-03-23 11:47:31 +02:00
Jouni Malinen
f21fbfb977 Allow RSNE in EAPOL-Key msg 2/4 to be overridden for testing purposes
The new wpa_supplicant control interface parameter rsne_override_eapol
can be used similarly to the earlier rsnxe_override_eapol to override
the RSNE value added into EAPOL-Key msg 2/4.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-15 11:11:38 +02:00
Jouni Malinen
e861fa1f6b Move the "WPA: AP key_mgmt" debug print to be after final changes
Driver capabilities may end up masking out some WPA_KEY_MGMT_* bits, so
debug print the outcome only after having performed all these steps.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-13 20:01:53 +02:00
Gurumoorthi Gnanasambandhan
1d9cff86bd Multi-AP: Set 4-address mode after network selection
Split multi_ap_process_assoc_resp() to set 4-address mode after network
selection. Previously, wpa_s->current_ssid might have been NULL in some
cases and that would have resulted in 4-address mode not getting enabled
properly.

Signed-off-by: Gurumoorthi Gnanasambandhan <gguru@codeaurora.org>
2020-03-13 17:00:19 +02:00
Ananya Barat
2b9713d616 Fill the current opclass in (Re)AssocRequest depending on HT/VHT IEs
The previous implementation was assuming a fixed 20 MHz channel
bandwidth when determining which operating class value to indicate as
the Current Operating Class in the Supported Operating Classes element.
This is not accurate for many HT/VHT cases.

Fix this by determining the current operating class (i.e., the operating
class used for the requested association) based on the HT/VHT operation
elements from scan results.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-11 18:30:31 +02:00
Arturo Buzarra
1f13c1393c mesh: Fix CONFIG_HT_OVERRIDES build without CONFIG_VHT_OVERRIDES
Commit e5a9b1e8a3 ("mesh: Implement use of VHT20 config in mesh mode")
introduced the possibility to check the disable_vht param. However, this
entry is only available when CONFIG_VHT_OVERRIDES is enabled and as
such, this broke the build for some cases.

Fix this by encapsulating VHT property with the proper CONFIG entry.

Fixes: e5a9b1e8a3 ("mesh: Implement use of VHT20 config in mesh mode")
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
2020-03-10 22:55:16 +02:00
Pradeep Kumar Chitrapu
43282f7329 mesh: Fix HE enablement on 5 GHz with VHT
Incorrect he_enabled parameter was being passed to
hostapd_set_freq_params() in mesh which caused HE to be not fully
enabled on the 5 GHz band. Fix this by setting freq->he_enabled instead
of vht_freq.he_enabled so that the hostapd_set_freq_params() uses the
correct he_enabled value (and then ends up copying this to
vht_freq.he_enabled in the success case).

Fixes: 6e711e7ab3 ("mesh: Do not enable HE on 5 GHz without VHT")
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
2020-03-02 19:54:35 +02:00
Jouni Malinen
852d370f65 Silence a compiler warning in no-WEP and no-EAP builds
wep_keys_set was not used in wpas_start_assoc_cb() without
IEEE8021X_EAPOL, so need to make this local variable conditional on
build options.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-01 20:57:14 +02:00
Jouni Malinen
200c7693c9 Make WEP functionality an optional build parameter
WEP should not be used for anything anymore. As a step towards removing
it completely, move all WEP related functionality to be within
CONFIG_WEP blocks. This will be included in builds only if CONFIG_WEP=y
is explicitly set in build configuration.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-02-29 17:45:25 +02:00
Alexander Wetzel
1f90a49d02 STA: Allow PTK rekeying without Ext KeyID to be disabled as a workaround
Rekeying a pairwise key using only keyid 0 (PTK0 rekey) has many broken
implementations and should be avoided when using or interacting with
one. The effects can be triggered by either end of the connection and
range from hardly noticeable disconnects over long connection freezes up
to leaking clear text MPDUs.

To allow affected users to mitigate the issues, add a new configuration
option "wpa_deny_ptk0_rekey" to replace all PTK0 rekeys with fast
reconnects.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-02-23 13:05:19 +02:00
Didier Raboud
8155b36fae Fix VERSION_STR printf() calls in case the postfix strings include %
Do not use VERSION_STR directly as the format string to printf() since
it is possible for that string to contain '%'.

Signed-off-by: Didier Raboud <odyx@debian.org>
2020-02-17 19:17:10 +02:00
Jouni Malinen
466e48dcd7 HT: Remove SMPS in AP mode
SM Power Save was described in somewhat unclear manner in IEEE Std
802.11n-2009 as far the use of it locally in an AP to save power. That
was clarified in IEEE Std 802.11-2016 to allow only a non-AP STA to use
SMPS while the AP is required to support an associated STA doing so. The
AP itself cannot use SMPS locally and the HT Capability advertisement
for this is not appropriate.

Remove the parts of SMPS support that involve the AP using it locally.
In practice, this reverts the following commits:
04ee647d58 ("HT: Let the driver advertise its supported SMPS modes for AP mode")
8f461b50cf ("HT: Pass the smps_mode in AP parameters")
da1080d721 ("nl80211: Advertise and configure SMPS modes")

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-02-16 13:58:54 +02:00
Matthew Wang
23dc196fde Check for FT support when selecting FT suites
A driver supports FT if it either supports SME or the
NL80211_CMD_UPDATE_FT_IES command. When selecting AKM suites,
wpa_supplicant currently doesn't take into account whether or not either
of those conditions are met. This can cause association failures, e.g.,
when an AP supports both WPA-EAP and FT-EAP but the driver doesn't
support FT (wpa_supplicant will decide to do FT-EAP since it is unaware
the driver doesn't support it). This change allows an FT suite to be
selected only when the driver also supports FT.

Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
2020-02-10 06:43:38 +02:00
Jouni Malinen
641d79f165 SAE: Special test mode sae_pwe=3 for looping with password identifier
The new sae_pwe=3 mode can be used to test non-compliant behavior with
SAE Password Identifiers. This can be used to force use of
hunting-and-pecking loop for PWE derivation when Password Identifier is
used. This is not allowed by the standard and as such, this
functionality is aimed at compliance testing.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-02-10 05:13:13 +02:00
Vamsi Krishna
d0e116f61f Enhance get_mode() to return correct hw_mode with 6 GHz support
The 5 GHz channels are stored in one hw_features set with mode
HOSTAPD_MODE_IEEE80211A while the 6 GHz channels will need to be stored
in a separate hw_features set (but with same mode
HOSTAPD_MODE_IEEE80211A) due to possibility of different HT/VHT/HE
capabilities being available between the 5 GHz and 6 GHz bands.

Iterate through all hw_features sets and check and match the band of
channel supported by the hw_features set while getting the hw_features
set in get_mode(). This allows both the 5 GHz and 6 GHz channels to be
found and correct capabilities to be used in cases where the driver
reports different capability values between 5 and 6 GHz channels.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-23 15:48:51 +02:00
Jouni Malinen
e36a5894d0 SAE: Use H2E whenever Password Identifier is used
IEEE P802.11-REVmd was modified to require H2E to be used whenever
Password Identifier is used with SAE.

See this document for more details of the approved changes:
https://mentor.ieee.org/802.11/dcn/19/11-19-2154-02-000m-sae-anti-clogging-token.docx

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-21 13:13:56 +02:00
Alexander Wetzel
a919a26035 Introduce and add key_flag
Add the new set_key() parameter "key_flag" to provide more specific
description of what type of a key is being configured. This is needed to
be able to add support for "Extended Key ID for Individually Addressed
Frames" from IEEE Std 802.11-2016. In addition, this may be used to
replace the set_tx boolean eventually once all the driver wrappers have
moved to using the new key_flag.

The following flag are defined:

  KEY_FLAG_MODIFY
    Set when an already installed key must be updated.
    So far the only use-case is changing RX/TX status of installed
    keys. Must not be set when deleting a key.

  KEY_FLAG_DEFAULT
    Set when the key is also a default key. Must not be set when
    deleting a key. (This is the replacement for set_tx.)

  KEY_FLAG_RX
    The key is valid for RX. Must not be set when deleting a key.

  KEY_FLAG_TX
    The key is valid for TX. Must not be set when deleting a key.

  KEY_FLAG_GROUP
    The key is a broadcast or group key.

  KEY_FLAG_PAIRWISE
    The key is a pairwise key.

  KEY_FLAG_PMK
    The key is a Pairwise Master Key (PMK).

Predefined and needed flag combinations so far are:

  KEY_FLAG_GROUP_RX_TX
    WEP key not used as default key (yet).

  KEY_FLAG_GROUP_RX_TX_DEFAULT
    Default WEP or WPA-NONE key.

  KEY_FLAG_GROUP_RX
    GTK key valid for RX only.

  KEY_FLAG_GROUP_TX_DEFAULT
    GTK key valid for TX only, immediately taking over TX.

  KEY_FLAG_PAIRWISE_RX_TX
    Pairwise key immediately becoming the active pairwise key.

  KEY_FLAG_PAIRWISE_RX
    Pairwise key not yet valid for TX. (Only usable with Extended Key ID
    support.)

  KEY_FLAG_PAIRWISE_RX_TX_MODIFY
    Enable TX for a pairwise key installed with KEY_FLAG_PAIRWISE_RX.

  KEY_FLAG_RX_TX
    Not a valid standalone key type and can only used in combination
    with other flags to mark a key for RX/TX.

This commit is not changing any functionality. It just adds the new
key_flag to all hostapd/wpa_supplicant set_key() functions without using
it, yet.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-01-09 12:38:36 +02:00
Jouni Malinen
6c57019376 Test functionality to override driver reported signal levels
"SET driver_signal_override <BSSID> [<si_signal< <si_avg_signal>
<si_avg_beacon_signal> <si_noise> <scan_level>]" command can now be used
to request wpa_supplicant to override driver reported signal levels for
signal_poll and scan results. This can be used to test roaming behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-02 20:34:39 +02:00
Jouni Malinen
ad2f096609 Maintain BSS entries for 5 seconds after interface is disabled
This is targeting the case of MAC address change for an association
which may require the interface to be set down for a short moment.
Previously, this ended up flushing the BSS table that wpa_supplicant
maintained and that resulted in having to scan again if the MAC address
was changed between the previous scan and the connection attempt. This
is unnecessary extra latency, so maintain the BSS entries for 5 seconds
(i.e., the same time that the old scan results are consider valid for a
new connection attempt) after an interface goes down.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-02 12:58:58 +02:00
Alfonso Sánchez-Beato
02c21c02d0 wpa_supplicant: Do not disconnect on deinit if WoWLAN is enabled
Do not disconnect on interface deinit when WoWLAN is enabled, so we can
boot the system with WoWLAN after S5 (poweroff).

Signed-off-by: Alfonso Sanchez-Beato <alfonso.sanchez-beato@canonical.com>
2019-12-30 18:51:06 +02:00
Jouni Malinen
53661e3a9a Allow debug log to be written to both syslog and file
If hostapd or wpa_supplicant is started with both -s and -f command line
arguments, debug log ended up being written only into syslog and the log
file was left empty. Change this so that the log entries will be written
to both places. Either -s or -f (or both) results in debug log to stdout
being disabled which was already the case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-28 18:28:10 +02:00
Ankita Bajaj
5f9b4afdfa Use frequency in HT/VHT validation steps done before starting AP
Using the channel parameter for validating allowed channel combinations
is not scalable to add 6 GHz support in the future since channel numbers
are duplicated between 2.4 GHz / 5 GHz bands and 6 GHz band. Hence use
frequency field for all channel combination validation steps done before
starting AP.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 13:05:39 +02:00
Jouni Malinen
1325655397 SAE H2E: RSNXE override for testing purposes
"SET rsnxe_override_{assoc,eapol} <hexdump>" can now be used to override
RSNXE in (Re)Association Request frames and EAPOL-Key msg 2/4 for
testing purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-07 12:54:54 +02:00
Jouni Malinen
b834e97003 SAE H2E: Testing option to report extra rejected groups
"SET extra_sae_rejected_groups <groups>" can now be used to enable test
mode in which wpa_supplicant will report additional groups (configured
as space separated integers) when using SAE H2E.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-07 00:26:13 +02:00
Jouni Malinen
6d6c887751 SAE: Add RSNXE in Association Request and EAPOL-Key msg 2/4
Add the new RSNXE into (Re)Association Request frames and EAPOL-Key msg
2/4 when using SAE with hash-to-element mechanism enabled. This allows
the AP to verify that there was no downgrade attack when both PWE
derivation mechanisms are enabled.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-17 16:54:05 +03:00
Dedy Lansky
cdb5774f42 FST: Update FST about MAC address change
Notify FST module upon MAC address change. FST module will update the
Multiband IE accordingly.

Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
447cd5f2df SAE: Collect list of rejected groups for H2E in STA
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
05a2fb0d11 SAE: Derive H2E PT in STA before connection
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
146889e3ca RSN: Verify RSNXE match between Beacon/ProbeResp and EAPOL-Key msg 3/4
If the AP advertises RSN Extension element, it has to be advertised
consistently in the unprotected (Beacon and Probe Response) and
protected (EAPOL-Key msg 3/4) frames. Verify that this is the case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Alexei Avshalom Lazar
a82aee1f40 wpa_supplicant: Add support for EDMG channels
As part of a connection request, set EDMG parameters for the driver to
use in the association. The EDMG parameters are based on EDMG IE
received from the AP's Probe Response frames, the driver's EDMG
capability, and the EDMG configuration from the configuration.

As part of starting an AP, set EDMG parameters for the driver to use for
AP operation. The EDMG parameters are based on the driver's EDMG
capability and the EDMG configuration from the configuration.

This implementation is limited to CB2 (channel bonding of 2 channels)
and the bonded channels must be adjacent, i.e., the supported values for
edmg_channel are 9..13.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 17:20:41 +03:00
Alexei Avshalom Lazar
bebd91e9c4 Add EDMG parameters to set_freq functions
This updates the frequency parameter setting functions to include
argument for EDMG.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 16:59:23 +03:00
Vamsi Krishna
2e06cef80a MBO/OCE: Work around misbehaving MBO/OCE APs that use RSN without PMF
The MBO and OCE specification require the station to mandate use of PMF
when connecting to an MBO/OCE AP that uses WPA2. The earlier
implementation prevented such misbehaving APs from being selected for
connection completely. This looks like the safest approach to take, but
unfortunately, there are deployed APs that are not compliant with the
MBO/OCE requirements and this strict interpretation of the station
requirements results in interoperability issues by preventing the
association completely.

Relax the approach by allowing noncompliant MBO/OCE APs to be selected
for RSN connection without PMF to avoid the main impact of this
interoperability issue. However, disable MBO/OCE functionality when PMF
cannot be negotiated to try to be as compliant as practical with the
MBO/OCE tech spec requirements (i.e., stop being an MBO/OCE STA for the
duration of such workaround association). Also disable support for BTM
in this workaround state since MBO would expect all BTM frames to be
protected.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-21 00:58:33 +03:00
Jouni Malinen
16ef233bf1 DPP2: Connection status result (Enrollee)
Add support for reporting connection status after provisioning if the
Configurator requests this.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-16 17:25:34 +03:00
Mikael Kanstrup
8788a314d7 WPS: Update MAC address on address changes
The WPS component keeps a copy of the network interface MAC address.
When MAC address is changed the WPS copy was not updated so WPS M1
message contained the old address. Some devices check this field
and fail connection attempts.

Update the WPS MAC address on interface MAC address changes.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sony.com>
2019-09-09 16:49:34 +03:00
Ankita Bajaj
a8bfc6fff2 FILS: Update connect params after sending connection notification
Update connect params will update auth_alg and fils_hlp_req in
wpa_supplicant structure before calling function
wpas_notify_state_changed(). This could have resulted in triggering
inconsistent state change events and messages in the Android framework.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-08 17:50:23 +03:00
Jouni Malinen
7d2ed8bae8 Remove CONFIG_IEEE80211W build parameter
Hardcode this to be defined and remove the separate build options for
PMF since this functionality is needed with large number of newer
protocol extensions and is also something that should be enabled in all
WPA2/WPA3 networks.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-08 17:33:40 +03:00
Jouni Malinen
b99c4cadb7 EAP peer: Move certificate configuration params into shared struct
These parameters for certificate authentication are identical for the
Phase 1 (EAP-TLS alone) and Phase 2 (EAP-TLS inside a TLS tunnel).
Furthermore, yet another copy would be needed to support separate
machine credential in Phase 2. Clean this up by moving the shared
parameters into a separate data struct that can then be used for each
need without having to define separate struct members for each use.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-01 17:19:31 +03:00
Sven Eckelmann
6e711e7ab3 mesh: Do not enable HE on 5 GHz without VHT
The commit ad9a1bfe78 ("nl80211: Share VHT channel configuration for
HE") always enforced that VHT is enabled when HE was enabled. This broke
the mesh functionality on 2.4 GHz with HE because ibss_mesh_setup_freq()
isn't setting up the VHT parameters for 2.4 GHz.

This problem was resolved for 2.4 GHz by commit df4f959988 ("nl80211:
Don't force VHT channel definition with HE"), but it is still possible
to disable VHT during the mesh/IBSS freq setup on 5 GHz - which would
result in the same problem as seen on 2.4 GHz.

The code enabling HE for IBSS/mesh must now make sure that it doesn't
enable HE when VHT could be enforced by the nl80211 driver code but
disabled by the user.

Fixes: 3459c54ac7 ("mesh: Add support for HE mode")
Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
2019-08-30 16:02:23 +03:00
Sunil Dutt
e0b331d896 OWE: Update connect params with new DH attributes to the driver
A new DH public key is sent through this interface to the driver after
every successful connection/roam to a BSS. This helps to do OWE roaming
to a new BSS with drivers that implement SME/MLME operations during
roaming.

This updated DH IEs are added in the subsequent (Re)Association Request
frame sent by the station when roaming. The DH IE from the roamed AP is
given to wpa_supplicant in the roam result event. wpa_supplicant shall
further process these DH IEs to generate the PMK for the 4-way
handshake.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-16 15:31:10 +03:00
Jouni Malinen
ae05b6a215 RSN: Do not allow connection to proceed without MFPC=1 if PMF required
PMF capability check is done as part of BSS selection routines, but
those are not used when going through the enforced roaming operation
("ROAM <BSSID>" control interface command). While that mechanism is
mainly for testing purposes, extend it to do the same check for PMF to
prevent cases where forced roaming could end up disabling PMF against
the local profile requirement.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-16 13:48:16 +03:00
Matthew Wang
dd0153fced Check for LEAP before doing FT
According to https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/80211r-ft/b-80211r-dg.html
Cisco does not support EAP-LEAP with Fast Transition. Here,
we check for LEAP before selecting FT 802.1X key management
suite.

Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2019-08-11 18:04:24 +03:00
Arend van Spriel
cb28bd52e1 nl80211: Use separate flag for 4-way handshake offload
Commit d896874f86 ("nl80211: Indicate 802.1X 4-way handshake offload
in connect") used the req_key_mgmt_offload flag to indicate to the
driver that it should offload the 802.1X handshake. However, this field
was existing and used for a different offload API. This causes
wpa_supplicant to send a connect request without the WANT_1X_HS flag and
the subsequent set-pmk is rejected causing the connection to fail. Fix
that by introducing a new flag req_handshake_offload so the offloads are
no longer entangled.

Fixes: d896874f86 ("nl80211: Indicate 802.1X 4-way handshake offload in connect")
Reported-by: Stefan Wahren <wahrenst@gmx.net>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
2019-08-01 15:52:48 +03:00
Eric Caruso
91b6eba773 Move MAC address randomization enable/disable to helper functions
This makes it easier to share this for D-Bus implementation.

Signed-off-by: Eric Caruso <ejcaruso@chromium.org>
2019-06-26 20:56:01 +03:00
Sven Eckelmann
3459c54ac7 mesh: Add support for HE mode
Mesh points can partially support HE features (when requiring no
controlling STA/AP) as long as hardware supports it. The kernel just
requires support for HE mesh and wpa_supplicant can forward the peer
capabilities to the kernel for further processing.

Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
2019-06-23 18:03:51 +03:00
Sven Eckelmann
f74618cb92 wpa_supplicant: Fix type for ssid->mode comparisons
The ssid->mode is from type enum wpas_mode and all its constants start
with WPAS_MODE_*. Still some of the code sections used the
IEEE80211_MODE_* defines instead of WPAS_MODE_*.

This should have no impact on the actual code because the constants for
INFRA, IBSS, AP and MESH had the same values.

Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
2019-06-23 18:03:51 +03:00
Ankita Bajaj
ef59f98729 WNM: Provide option to disable/enable BTM support in STA
Add support to disable/enable BTM support using configuration and
wpa_cli command. This is useful mainly for testing purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-06-14 23:10:51 +03:00
John Crispin
88005ee98d HE: Pass in HE information into hostapd_set_freq_params()
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-05-27 17:33:59 +03:00
John Crispin
464dcfd030 HE: Remove VHT_ prefix from CHANWITDH_* define
The bandwidth values are shared between VHT and HE mode so remove the
VHT specific prefix.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-05-27 16:27:49 +03:00
Jouni Malinen
9083ef1355 FT: Allow PMKSA caching to be enabled with FT-EAP
The new wpa_supplicant network profile configuration parameter
ft_eap_pmksa_caching=1 can be used to enable use of PMKSA caching with
FT-EAP for FT initial mobility domain association. This is still
disabled by default (i.e., maintaining previous behavior) to avoid
likely interoperability issues.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-28 16:01:45 +03:00