Commit graph

43 commits

Author SHA1 Message Date
Jouni Malinen
6f416c7867 RSN IBSS: Fix segfault on error path
If wpa_init() fails, wpa_deinit(NULL) must not be called to avoid
hitting a NULL pointer dereference.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 21:35:16 +03:00
Eduardo Abinader
01e87ef64f IBSS: Check ibss_rsn init before starting new IBSS authentication
Sanity check added to avoid segmentation fault which occurs, when
issuing ibss_rsn ctrl iface cmd and IBSS was not initialized previously
via IBSS network selection.

Signed-off-by: Eduardo Abinader <eduardo.abinader@openbossa.org>
2015-05-03 17:15:00 +03:00
Jouni Malinen
2961bfa8e1 Remove unused send_eapol() driver op
The send_eapol() callback was used by driver_test.c, but with that
removed, there is no remaining users of the alternative EAPOL frame
transmitting mechanism in wpa_supplicant, i.e., all remaining driver
interfaces use l2_packet instead. Remove the send_eapol() to get rid of
unused code.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 15:40:07 +02:00
Jouni Malinen
bc26ac50dd SAE: Add support for PMKSA caching on the station side
This makes wpa_supplicant SME create PMKSA cache entries from SAE
authentication and try to use PMKSA caching if an entry is found for the
AP. If the AP rejects the attempt, fall back to SAE authentication is
used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 13:02:02 +03:00
Johannes Berg
3326f19355 IBSS RSN: Use monotonic time for reinit detection
The reinit detection skips reinit when the time since the own
authentication frame TX is less than half a second, so it shouldn't
be affected by wall time and use monotonic time instead.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 07:58:21 +02:00
Jouni Malinen
759fd76b7f P2P: Select PSK based on Device Address instead of Interface Address
When using per-device PSKs, select the PSK based on the P2P Device
Address of the connecting client if that client is a P2P Device. This
allows the P2P Interface Address to be changed between P2P group
connections which may happen especially when using persistent groups.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 11:30:26 +03:00
Jouni Malinen
94ddef3e72 P2P: Make peer's P2P Device Address available to authenticator
This can be used to implement per-device PSK selection based on the
peer's P2P Device Address instead of P2P Interface Address.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 11:05:19 +03:00
Jouni Malinen
add7add09d IBSS RSN: Add a timeout for Authentication frame exchange
It is possible for the peer device not to support Authentication frame
exchange even though this would be required functionality in the
standard. Furthermore, either Authentication frame may be lost. To
recover from cases where Authentication frame sequence 2 is not
received, start EAPOL Authenticator from one second timeout.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-27 16:26:33 +03:00
Jouni Malinen
6fb7b58fe4 IBSS RSN: Work around Data RX vs. Authentication RX race condition
It is possible for the driver to report EAPOL frame RX before
Authentication frame RX even if the frames arrived in the opposite
order. This can result in issues in cases where both IBSS peers initiate
Authentication frame exchange at about the same time and one of the
EAPOL sessions is started before processing Authentication frame seq=1
RX. Work around this by not re-initializing EAPOL state on
Authentication (SEQ=1) RX if own Authentication frame was transmitted
within last 500 ms.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-27 02:54:35 +03:00
Jouni Malinen
e743db4309 IBSS RSN: Add IBSS-RSN-COMPLETED event message
This new control interface event message is used to indicate when
both 4-way handshakes have been completed with a new IBSS peer.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-25 23:09:22 +03:00
Antonio Quartulli
13adc57b39 IBSS RSN: Add peer restart detection
To better support the IBSS/RSN mechanism, wpa_supplicant has to be able
to detect a possible peer reboot and in this case it should start a new
EAPOL handshake.

To perform such reboot detection wpa_supplicant has to perform an Open
Authentication by sending an Authentication frame and then replying to
it. IF an Authentication frame is received when the key have already
been exchanged, wpa_supplicant understands that the peer has rebooted
and can reset its state machine.

Whenever a new peer is added to the IBSS wpa_supplicant will start the
Open Authentication and only after having accomplished it will start the
key exchange. If the driver does not support Authentication frame
exchange initiated from user space, this step is skipped to maintain
previous behavior (just go through EAPOL-Key frame processing).

The Open Authentication was partly supported by the Linux kernel but now
wpa_supplicant can register for Authentication frames, handle it in
userspace and so avoid any possible race condition.

Signed-hostap: Nicolas Cavallari <cavallar@lri.fr>
Signed-hostap: Antonio Quartulli <antonio@open-mesh.com>
2013-07-21 15:56:53 +03:00
Bharat Bhushan
1aef400bf0 IBSS RSN: Implement disconnect() callback using sta_deauth()
This allows driver wrappers to implement disconnection of IBSS peers in
cases operations, e.g., GTK update, fail.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 13:07:17 +03:00
Antonio Quartulli
e640888c5e IBSS RSN: Support authorization
In IBSS RSN cfg80211/mac80211 now waits for userspace to authorize new
stations. This patch makes wpa_supplicant notify the driver when a
station can be considered authorized.

Signed-hostap: Antonio Quartulli <ordex@autistici.org>
2012-02-12 21:12:22 +02:00
Jouni Malinen
0f3d578efc Remove the GPL notification from files contributed by Jouni Malinen
Remove the GPL notification text from the files that were
initially contributed by myself.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-11 19:39:36 +02:00
Antonio Quartulli
fa7187bfde IBSS RSN: Provide ibss_rsn_get_peer() helper function
This is a useful function that simplifies some code and can eventually
be used somewhere else in future.

Signed-hostap: Antonio Quartulli <ordex@autistici.org>
2012-01-29 12:23:27 +02:00
Johannes Berg
457a126e29 IBSS: fix RSN key initialisation
Antonio reported that RSN IBSS failed to work.
We traced it down to a GTK failure, and he then
bisected it to commit bdffdc5ddb:
"AP: Reorder WPA/Beacon initialization".

The reason this commit broke it is that the state
machine's GInit variable is never set to false as
wpa_init_keys() never gets called, and thus new
keys are generated every time the state machine
executes.

Fix this by calling wpa_init_keys() when the new
group has been initialised.

Reported-by: Antonio Quartulli <ordex@autistici.org>
Tested-by: Antonio Quartulli <ordex@autistici.org>
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-11 19:57:50 +02:00
Jouni Malinen
19df9b0761 Mark local functions static
These functions are not used outside the file in which they are defined.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-18 21:53:36 +02:00
Jouni Malinen
4a26df7107 IBSS RSN: peer->addr is an array so it cannot be NULL 2011-04-14 20:18:12 +03:00
Jouni Malinen
78177a000e RSN IBSS: Restart IBSS state machines for each new IBSS
Change the old design of running a single long living RSN IBSS
instance to keep a separate instance for each IBSS connection.
This fixes number of issues in getting keys set properly for
new connections and is in general quite a bit more correct
design.
2011-03-23 21:15:46 +02:00
Xi Chen
ea244d2156 IBSS RSN: Clear IBSS RSN peers based on peer lost events 2011-03-18 17:04:46 +02:00
Xi Chen
13579b987b IBSS RSN: Enable group rekeying every 10 minutes 2011-03-16 16:28:56 +02:00
Xi Chen
92ac6376c4 IBSS RSN: Add for_each_sta handler for authenticator 2011-03-16 16:28:32 +02:00
Xi Chen
f385833bda IBSS RSN: Add supp_get_state handler 2011-03-16 16:27:08 +02:00
Jouni Malinen
6c9a98a20d IBSS RSN: Do not start multiple Auth/Supp for same peer
This avoids an issue when a received EAPOL-Key frame from a peer
is initiating IBSS RSN Authenticator and Supplicant for the peer
and the following new-STA-in-IBSS event from the driver is adding
yet another instance of Authenticator/Supplicant. The EAPOL-Key
RX case was already checking whether an instance had been started;
the driver new-STA event needs to do same.
2011-01-15 16:55:15 +02:00
Jouni Malinen
50b05780c2 IBSS RSN: Delay setting of the initial TX GTK
The driver may get confused if we set the initial TX GTK before having
fully configured and connected to an IBSS, so better delay this
operation until the connection (join/start IBSS) has been completed.
2011-01-15 14:07:02 +02:00
Jouni Malinen
89c38e32c7 RSN IBSS: RX GTK configuration with nl80211
This add preliminary code for setting the per-STA RX GTK for
RSN IBSS when nl80211 drivers. For some reason, this does not
seem to fully work, but at least driver_nl80211.c is now aware of
what kind of key is being set and the whatever is missing from
making this key configuration go through should be specific to
nl80211/cfg80211.
2010-12-04 20:31:22 -08:00
Jouni Malinen
a416fb47eb IBSS RSN: Explicitly check addr != NULL before passing it to memcmp
idx == 0 should be enough to make sure that the addr is set, but
verify that this is indeed the case to avoid any potential issues if
auth_set_key() gets called incorrectly.
2010-01-10 21:53:17 +02:00
Jouni Malinen
6f9b5d1696 IBSS RSN: Check explicitly that WPA auth sm assoc call succeeded
Verify that association processing did not end up freeing the state
machine. This should not really happen in practice, but better verify
it anyway.
2010-01-10 21:45:44 +02:00
Jouni Malinen
719347511a Get rid of unnecessary typedefs for enums. 2009-12-26 10:35:08 +02:00
Jouni Malinen
1057d78eb8 Move generic AP functionality implementation into src/ap
This code can be shared by both hostapd and wpa_supplicant and this
is an initial step in getting the generic code moved to be under the
src directories. Couple of generic files still remain under the
hostapd directory due to direct dependencies to files there. Once the
dependencies have been removed, they will also be moved to the src/ap
directory to allow wpa_supplicant to be built without requiring anything
from the hostapd directory.
2009-12-25 01:12:50 +02:00
Jouni Malinen
a486c0c72a IBSS RSN: Add more verbose debug info for key setup 2009-12-04 22:55:28 +02:00
Jouni Malinen
ea038e0da4 Fix IBSS RSN build 2009-11-29 18:31:16 +02:00
Jouni Malinen
3acb50056c Remove src/rsn_supp from default header path 2009-11-29 18:28:08 +02:00
Jouni Malinen
98f14041d0 IBSS RSN: Added key configuration 2009-01-17 18:14:41 +02:00
Jouni Malinen
0f057fb2c7 Added a separate ctx pointer for wpa_msg() calls in WPA supp
This is needed to allow IBSS RSN to use per-peer context while
maintaining support for wpa_msg() calls to get *wpa_s as the pointer.
2009-01-17 17:54:40 +02:00
Jouni Malinen
b9a2e577b4 IBSS RSN: Set the PSK based on network configuration 2009-01-17 17:47:25 +02:00
Jouni Malinen
4691fc7bc8 IBSS RSN: Set more hardcoded RSN IEs for now
This allows 4-way handshakes to be completed successfully.
2009-01-17 17:39:57 +02:00
Jouni Malinen
3146b2b961 IBSS RSN: Added couple of required WPA supplicant callback functions 2009-01-17 17:31:21 +02:00
Jouni Malinen
8be1844071 Process received EAPOL frames in IBSS RSN code if in IBSS mode 2009-01-17 17:25:11 +02:00
Jouni Malinen
da3c6a5e2b Fixed auth_send_eapol() to use correct ctx structure 2009-01-16 01:18:11 +02:00
Jouni Malinen
d0fc6e1211 Use a hardcoded RSN IE for testing to start Authenticator
This needs to be replaced with proper RSN IE from the peer STA (e.g.,
from Probe Response).
2009-01-16 01:11:50 +02:00
Jouni Malinen
e2d492dd08 Implement EAPOL sending callbacks for IBSS RSN 2009-01-16 00:56:31 +02:00
Jouni Malinen
11ef8d3578 Added initial step for IBSS RSN support
This commit adds a new build option, CONFIG_IBSS_RSN=y, that can be used
to enable RSN support for IBSS. This links in RSN Authenticator code
from hostapd and adds code for managing per-peer information for IBSS. A
new wpa_cli command or driver event can be used to request RSN
authentication with an IBSS peer. New RSN Authenticator and Supplicant
will be allocated for each peer.

The basic state machine setup code is included in this commit, but the
state machines are not properly started yet. In addition, some of the
callback functions are not yet complete.
2009-01-15 01:21:55 +02:00