Commit graph

15330 commits

Author SHA1 Message Date
Jouni Malinen
78e931e7f9 tests: Fix sigma_dut_sae_h2e_rsnxe_mismatch to clear sae_pwe
sae_pwe=1 could be left configured when exiting this test case since
sigma_dut does not guarantee the default value to be restored. This
could result in test case failures, e.g., in the following sequence:
sigma_dut_sae_h2e_rsnxe_mismatch sae_pwe_h2e_only_ap_sta_forcing_loop

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-30 19:32:28 +02:00
Ethan Everett
22319c7fed RADIUS client: fix extra retry before failover
This commit changes the failover behavior of RADIUS client. Commit
27ebadccfb ("RADIUS client: Cease endless retry for message for
multiple servers") changed the retry logic, causing RADIUS client to
wait RADIUS_CLIENT_NUM_FAILOVER + 1 timeouts before failing over the
first time. Prior to that commit, RADIUS client would wait
RADIUS_CLIENT_NUM_FAILOVER timeouts before each failover. This was
caused by moving the entry->attempts > RADIUS_CLIENT_NUM_FAILOVER
comparison to before the retry attempt, where entry->attempts is
incremented.

The commit in question set entry->attempts in radius_change_server to 1
instead of 0, so RADIUS client would still only wait
RADIUS_CLIENT_NUM_FAILOVER timeouts for subsequent failovers, the same
as the original behavior.

This commit changes the comparison so the initial failover now happens
after waiting RADIUS_CLIENT_NUM_FAILOVER timeouts, as it did originally.
It also changes the RADIUS_CLIENT_MAX_FAILOVER comparison to prevent an
additional attempt to the primary server after the final failover.

Signed-off-by: Ethan Everett <ethan.everett@meraki.net>
2019-12-30 19:13:51 +02:00
Jouni Malinen
54c154d2c9 tests: radius_acct_unreachable2 to detect retransmissions earlier
It looks like this test case can start showing failures with a change in
the retransmission limit behavior for a server change. Check for
retransmissions every second instead of only at the end of the four
second wait to avoid this.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-30 19:13:51 +02:00
Ilan Peer
7bcb63913a tests: Extend the timeout for some SAE error case tests
Commit 407879b690ba ("mac80211: Adjust SAE authentication timeout") in
the kernel tree increased the SAE authentication timeout. This caused
some error case tests to fail. To fix this, extend the timeout for some
error case tests.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2019-12-30 18:57:40 +02:00
Alfonso Sánchez-Beato
02c21c02d0 wpa_supplicant: Do not disconnect on deinit if WoWLAN is enabled
Do not disconnect on interface deinit when WoWLAN is enabled, so we can
boot the system with WoWLAN after S5 (poweroff).

Signed-off-by: Alfonso Sanchez-Beato <alfonso.sanchez-beato@canonical.com>
2019-12-30 18:51:06 +02:00
Matteo Croce
82ba4f2d1b nl80211: Add a driver ops function to check WoWLAN status
Add function that returns whether WoWLAN has been enabled for the device
or not.

Signed-off-by: Alfonso Sanchez-Beato <alfonso.sanchez-beato@canonical.com>
2019-12-30 18:46:29 +02:00
Bilal Hatipoglu
59536a33d8 wpa_cli: WPS-PIN-ACTIVE and WPS-CANCEL events for action scripts
These events were added in commit b1b62a1364 ("WPS: Add WPS-PIN-ACTIVE
and WPS-CANCEL events").

Signed-off-by: Bekir Celik <bekir.celik@airties.com>
Signed-off-by: Bilal Hatipoglu <bilal.hatipoglu@airties.com>
2019-12-30 18:36:57 +02:00
Jouni Malinen
4153243932 tests: Make wps_reg() test cases more robust
Explicitly clear cfg80211 scan cache to avoid issues with old BSS
entries from previous test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-30 00:22:23 +02:00
Jouni Malinen
b0621b083d Call hostapd_allowed_address() directly from handle_probe_req()
ieee802_11_allowed_address() did not really do anything useful for the
call from handle_probe_req(), so replace that with a direct call to
hostapd_allowed_address() and make ieee802_11_allowed_address() a static
function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-29 23:44:32 +02:00
Michael Braun
963681723f Fix possible memory leak of RADIUS data in handle_auth()
When returning from handle_auth() after ieee802_11_allowed_address()
returned HOSTAPD_ACL_ACCEPT, but before ieee802_11_set_radius_info() has
been called, identity, radius_cui, and psk might not have been consumed.

Fix this by avoiding the need to free these variables at all.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2019-12-29 23:43:55 +02:00
Michael Braun
d4ceaafc24 Make hostapd_copy_psk_list() non-static
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2019-12-29 23:34:01 +02:00
Michael Braun
29024efd18 Move the RADIUS cached attributes into a struct
This makes it easier to pass these around and to add new attributes.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2019-12-29 23:33:57 +02:00
Jouni Malinen
3cd4db231a FT: Do not deliver RRB messages locally without matching FT/SSID
For FT protocol to work, the BSSs need to be operating an FT AKM with
the same SSID and mobility domain. The previous commit covered the
mobility domain, this covers the other prerequisites. This reduces
unnecessary load from having to allocate queued messages for interfaces
that cannot have valid data.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-29 20:41:41 +02:00
Jinglin Wang
c133c785df FT: Check mobility domain when sending RRB message to local managed BSS
Fast BSS Transition requires related APs operating in the same mobility
domain. Therefore, we can check whether the local managed BSS is
operating the same mobility domain before sending multicast/unicast
messages to it. This reduces unnecessary load from having to allocate
queued messages for interfaces that cannot have valid data.

Signed-off-by: Jinglin Wang <bryanwang@synology.com>
Signed-off-by: MinHong Wang <minhongw@synology.com>
2019-12-29 20:32:07 +02:00
Jouni Malinen
0d0baf9f17 tests: RRB wildcard R0KH/R1KH pull with multiple BSSs
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-29 20:32:07 +02:00
Jouni Malinen
a422d9b4c2 RRB: More debug prints for local delivery
This makes it easier to figure out how frames are delivered directly
between BSSs operated within a single hostapd process.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-29 20:17:57 +02:00
Jouni Malinen
7b1105afef RRB: Do not reorder locally delivered messages
Add new messages to the end of the l2_oui_queue instead of inserting
them at the beginning so that the dl_list_for_each_safe() iteration in
hostapd_oui_deliver_later() goes through the messages in the same order
they were originally queued.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-29 20:17:57 +02:00
Jinglin Wang
4834c6869d FT: Fix hostapd_wpa_auth_oui_iter() iteration for multicast packets
When using FT wildcard feature, the inter-AP protocol will send
broadcast messages to discover related APs.

For example,
12/6 16:24:43 FT: Send PMK-R1 pull request to remote R0KH address
    ff:ff:ff:ff:ff:ff
12/6 16:24:43 FT: Send out sequence number request to
    ff:ff:ff:ff:ff:ff

If you have multiple interfaces/BSSs in a single hostapd process,
hostapd_wpa_auth_oui_iter() returned 1 after the first interface was
processed. Iteration in for_each_interface() will be stopped since it
gets a non-zero return value from hostapd_wpa_auth_oui_iter().

Even worse, the packet will not be sent to ethernet because
for_each_interface() returns non-zero value. hostapd_wpa_auth_send_oui()
will then return data_len immediately.

To prevent this, hostapd_wpa_auth_oui_iter() should not return 1 after
any successful transmission to other interfaces, if the dst_addr of
packet is a multicast address.

Signed-off-by: Jinglin Wang <bryanwang@synology.com>
Signed-off-by: MinHong Wang <minhongw@synology.com>
2019-12-29 20:09:52 +02:00
Daniel Kobras
18780c6d67 OpenSSL: Add support for TPM2-wrapped keys
If the header of a PEM-formatted certificate or key in private_key file
indicates that it is wrapped with a TPM2 key, try to autoload the
appropriate OpenSSL engine that can transparently unwrap the key. This
enables systems to use TPM2-wrapped keys as drop-in replacements to
ordinary SSL keys.

This functionality needs
https://git.kernel.org/pub/scm/linux/kernel/git/jejb/openssl_tpm2_engine.git
to be installed as an OpenSSL engine.

Signed-off-by: Daniel Kobras <kobras@puzzle-itc.de>
2019-12-29 11:28:19 +02:00
Jouni Malinen
deb92a6bf9 tests: Make ap_hs20_gas_while_associated_with_pmf more robust
Explicitly clear cfg80211 scan cache to avoid issues with old BSS
entries from previous test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-28 23:38:36 +02:00
Jouni Malinen
94e66da6df tests: ignore_broadcast_ssid and SSID List or Short SSID List mismatch
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-28 23:21:14 +02:00
Jouni Malinen
974f84bb73 Fix ignore_broadcast_ssid behavior with SSID List and Short SSID List
ignore_broadcast_ssid=1 (or 2) were practically ignored if the Probe
Request frame included the SSID List or Short SSID List elements. Fix
this by requiring exact SSID match whenever ignore_broadcast_ssid is in
use regardless how SSID parameters are set in the Probe Request frame.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-28 23:19:44 +02:00
Jouni Malinen
d5c39e1488 tests: Scan using SSID List and Short SSID List elements
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-28 23:14:47 +02:00
Andrei Otcheretianski
1c7f652f9e AP: Support Short SSID List element in Probe Request frames
According to IEEE P802.11ax/D6.0, 11.1.4.3.4 (Criteria for sending a
response), AP should answer Probe Request frames if either SSID or Short
SSID matches. Implement this part of the Short SSID use for the BSS (the
collocated 6 GHz BSS case is not covered in this commit).

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2019-12-28 23:13:58 +02:00
Andrei Otcheretianski
522450b7b1 AP: Determine Short SSID value for the BSS
This can be used in the future to implement support for RNR and scanning
extensions using a shorter field for the SSID.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2019-12-28 22:32:14 +02:00
Felix Fietkau
41b06b065e mesh: Fix race condition in mesh mpm new peer handling
When wpa_supplicant receives another new peer event before the first one
has been processed, it tries to add a station to the driver a second
time (which fails) and then tears down the station entry until another
event comes in.

Fix this by only adding a station to the driver if it didn't exist
already.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-12-28 20:56:03 +02:00
Zefir Kurtisi
ef48f1bfb3 Ensure authenticator session timer is applied with wired driver
We use the wired driver for wired port authentication with a slight
extension to add the port into a bridge upon successful authentication
and to remove it from the bridge when the session terminates.

Our expectation was that the Session-Timeout configuration at the RADIUS
server is respected, i.e. the session is terminated and would need
re-authentication - like it is working for WLAN sessions over the
nl80211 driver. Alas, it turned out the session is not terminated with
the wired driver.

It turned out that when ap_handle_session_timer() is executed, the
sta->flags of the wired port has only the WLAN_STA_AUTHORIZED bit set.
The WLAN_STA_AUTH bit, which is used to check whether the STA needs to
be de-authenticated, is missing.

Extend the check for any of the WLAN_STA_(AUTH | ASSOC | AUTHORIZED)
bits to solve this issue with the wired driver. That should not have any
side-effect for the WLAN cases since WLAN_STA_AUTH is expected to always
be set for those when there is an ongoing session and separate checks
for ASSOC and AUTHORIZED don't change this.

Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
2019-12-28 20:50:05 +02:00
Jouni Malinen
44adf014ff tests: Fix he_supported() check with python3
This was making error paths on HE test cases fail with:
TypeError: a bytes-like object is required, not 'str'

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-28 19:52:47 +02:00
Jouni Malinen
d0cd750435 tests: Make ap_hs20_roaming_consortium more robust
Explicitly clear cfg80211 scan cache to avoid issues with old BSS
entries from previous test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-28 19:05:50 +02:00
Jouni Malinen
ece9aa627a tests: Make ap_cipher_mixed_wpa_wpa2 more robust
Explicitly clear cfg80211 scan cache to avoid issues with old BSS
entries from previous test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-28 19:03:22 +02:00
Lubomir Rintel
a383db0646 defconfig: Enable MACsec
Debian and Fedora enable it, NetworkManager uses it.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-12-28 18:28:10 +02:00
Jouni Malinen
53661e3a9a Allow debug log to be written to both syslog and file
If hostapd or wpa_supplicant is started with both -s and -f command line
arguments, debug log ended up being written only into syslog and the log
file was left empty. Change this so that the log entries will be written
to both places. Either -s or -f (or both) results in debug log to stdout
being disabled which was already the case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-28 18:28:10 +02:00
Jouni Malinen
53a96146fb tests: Ignore fe80::ff:fe00:300 NS from AP for now in proxyarp tests
This NS seems to go out from the AP interface every now and then and it
makes proxyarp_open_ebtables_ipv6 fails inconveniently often. That frame
should not really be there, but it's not clear what exactly is needed to
stop it going through. It does not come from the test operations
themselves, so ignore it for now to keep test results cleaner.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-28 17:17:05 +02:00
Jouni Malinen
e5d9f99b3f tests: Make ap_hs20_nai_realms more robust
Explicitly clear cfg80211 scan cache to avoid issues from scan results
from previous test cases interfering with INTERWORKING_CONNECT
operation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-28 00:34:25 +02:00
Jouni Malinen
68f9f480ef wpa_gui: Silence a compiler warning
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-28 00:17:55 +02:00
Victor Ananyev
eadfeb0e93 wpa_gui: Show entire list of networks
Use LAST_ID of LIST_NETWORKS to load all the network entries iteratively
if there is large enough number of networks to not fit in a single
response.

Signed-off-by: Victor Ananyev <vindex10@gmail.com>
2019-12-28 00:16:38 +02:00
Victor Ananyev
a3b59fa111 wpa_cli: Let LAST_ID argument to be used for LIST_NETWORKS
This allows starting point of the network list to be specified so that
the potentially long response can be fragmented into multiple fetch
operations.

Signed-off-by: Victor Ananyev <vindex10@gmail.com>
2019-12-27 23:56:02 +02:00
Jouni Malinen
4e9bcdebf3 tests: Replace tcpdump with wlantest
This removes dependency on tcpdump by using an already included test
tool for capturing frames with Ethernet headers. There were some issues
in getting tcpdump working on Ubuntu 19.10, so this seems to be a clean
way of addressing that.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-27 23:43:09 +02:00
Jouni Malinen
420989085d wlantest: Ethernet interface capture
Allow option (command line argument -e) to capture Ethernet headers
instead of IEEE 802.11 so that wlantest can be used as a replacement for
tcpdump/dumpcap for capturing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-27 23:16:45 +02:00
Jouni Malinen
4415da686d tests: Make rrm_reassociation more robust
Flush cfg80211 scan cache explicitly when running this test case to
avoid issues with the ROAM command not working due to a scan result from
an earlier test case. This was causing failures in the following test
case sequence:
rrm_beacon_req_active_ap_channels rrm_reassociation

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-27 22:41:36 +02:00
Sergey Matyukevich
078217a2d7 STA OBSS: Update secondary channel info after CSA
Field wpa_s->sme.ht_sec_chan keeps secondary channel for the 40 MHz
band. This field is used to prepare a list of channels for the STA OBSS
scan. Initially, the secondary channel is set to HT_SEC_CHAN_UNKNOWN.
Later on, in function wpa_obss_scan_freq_list() it is obtained from the
current BSS HT operation IE. However, the secondary channel information
is not updated after channel switch, which may lead to an incorrect list
of channels prepared for the STA OBSS scan.

Update ht_sec_chan according to the channel switch event data to fix
this.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
2019-12-27 21:04:57 +02:00
Jouni Malinen
a6ba5cca45 tests: Allow more VMs to be started in parallel
Check the number of CPUs to determine how many VMs can be started in
parallel.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-27 20:31:33 +02:00
Jouni Malinen
d07ca835cb tests: Move ocsp-resp-*-signed*.der generation into test case
There is no need to generate these OCSP responses for every single test
session. Generate these more dynamically if a test case that uses these
files is executed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-27 20:14:02 +02:00
Jouni Malinen
b6bb4cd8c5 tests: Move ocsp-server-cache-{revoked,unknown}.der generation into test case
There is no need to generate these OCSP responses for every single test
session. Generate these more dynamically if a test case that uses these
files is executed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-27 20:14:02 +02:00
Jouni Malinen
662c2fa01a tests: Use the run_openssl() helper for running openssl
This avoids unnecessary duplication of the same functionality to run
openssl and check result.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-27 20:14:02 +02:00
Jouni Malinen
47ccb9ce24 tests: Move ocsp-server-cache-key-id.der generation into test case
There is no need to generate this OCSP response for every single test
session. Generate this more dynamically if the test case that uses the
particular file is executed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-27 20:14:02 +02:00
Jouni Malinen
b5c28af431 tests: Remove unnecessary copying of ocsp-multi-server-cache.der
This file is not being modified, so the original one from the auth_serv
directory can be used directly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-27 20:14:02 +02:00
Jouni Malinen
6cd59688b8 tests: Fix thread handling in P2P GO Negotiation test cases
Some of the error paths in go_neg_pbc() and go_neg_pin() did not wait
for the helper thread to complete processing. This could result in
unexpected behavior when the test case could have exited while the
thread was still performing tasks for the GO Negotiation. This could
result in getting stuck in one of the following test cases with
"go_neg_init_pbc thread caught an exception from p2p_go_neg_init: Group
formation timed out" showing up in the log.

This was hit, e.g., with the following test sequence:
no_go_freq p2p_channel_drv_pref_autogo

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-27 18:14:09 +02:00
Jouni Malinen
c64b6f62cd tests: Use python selector in the parallel-vm.py main loop
This gets rid of the loop that was polling for things to do every 0.25
seconds and instead, reacts to any data from VMs as soon as it becomes
available. This avoids unnecessary operations when no new data is
available and avoids unnecessary waits when new data becomes available
more quickly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-27 17:12:34 +02:00
Jouni Malinen
0075df74df tests: Make pmksa_cache_expiration more robust
Wait for hostapd to enter the PTKINITDONE state before checking
connectivity. This is needed to avoid a race condition with UML
time-travel.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-27 16:03:50 +02:00