Commit graph

171 commits

Author SHA1 Message Date
Jouni Malinen
2977f5193a GAS: Remove unnecessarily duplicate gas_frag_limit configuration
The actual BSS configuration parameter can be updated with the SET
control interface command, so there is no need to maintain a separate
per-BSS parameter and a separate control interface handling for this.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-30 00:23:10 +02:00
Jouni Malinen
fd5f29e7ed Fix memory leak in hostapd BSS_TM_REQ error path handling
The optional url=<URL> parameter was stored in allocated memory and that
memory was leaked if some following parameter parsing attempts failed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-28 14:31:42 +02:00
Jouni Malinen
45997cce40 hostapd: Add TERMINATE as per-interface command
This was already avaialble through the global control interface, but not
the per-interface one.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-27 14:50:14 +02:00
Jouni Malinen
47d74bf010 Add MGMT_RX_PROCESS test command for hostapd
This makes it easier to write hwsim test cases to verify management
frame processing sequences with dropped or modified frames. When
ext_mgmt_frame_handling is used, this new command can be used to request
hostapd to process a received a management frame, e.g., based on
information reported in the MGMT-RX events.

This is more or less identical to the earlier wpa_supplicant commit
4de70e2330 ('Add MGMT_RX_PROCESS test
command for wpa_supplicant'), but for hostapd.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-29 16:26:00 +02:00
Jouni Malinen
d503eeead1 FT: Complete CONFIG_IEEE80211R_AP renaming for hostapd
Commit 4ec1fd8e42 ('FT: Differentiate
between FT for station and for AP in build') renamed all
CONFIG_IEEE80211R instances within src/ap/* to CONFIG_IEEE80211R_AP, but
it did not change hostapd/* files to match. While this does not cause
much harm for normal use cases, this broke some test builds where
wpa_supplicant build is used to build in hostapd/*.c files for analysis.
Fix this by completing CONFIG_IEEE80211R_AP renaming.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-11-20 00:35:35 +02:00
David Spinadel
451a27b1ad hostapd: Add a configuration to set an AP as stationary
Add a configuration option in hostapd.conf and in neighbor report that
sets an AP as stationary. To enable this option on the current AP set
the config option stationary_ap to 1. To set a neighbor entry to be
marked as stationary add the word stat to the SET_NEIGHBOR command. This
option tells hostapd to send LCI data even if it is older than requested
by max age subelement in RRM request.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-10-29 19:16:47 +03:00
Kevin Mahoney
a818425d1c hostapd: Added signal level to STA tracking
Add signal level information to the station tracking information. Also
make it available via the "TRACK_STA_LIST" control command.

Signed-off-by: Kevin Mahoney <k.mahoney@cablelabs.com>
2016-10-29 00:55:49 +03:00
Michael Braun
a1047f55b8 Remove duplicate dl_list_init() for global_ctrl_dst
Commit 56885eecf4 ('hostapd: Add UDP
support for ctrl_iface') added dl_list_init() for global_ctrl_dst to
hostapd_global_ctrl_iface_init().

Though, hostapd_global_ctrl_iface_init() is only called from
main.c:main(), which already initializes global_ctrl_dst unconditionally
before. Same with global_ctrl_sock.

Remove this duplicate initialization.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-10-29 00:55:49 +03:00
Jouni Malinen
903ecbe8da FILS: Add hostapd configuration options
This adds CONFIG_FILS=y build configuration option and new key
management options for FILS authentication.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-10 21:11:27 +03:00
Denton Gentry
04059ab844 Passive Client Taxonomy
Implement the signature mechanism described in the paper
"Passive Taxonomy of Wifi Clients using MLME Frame Contents"
published by Denton Gentry and Avery Pennarun.

http://research.google.com/pubs/pub45429.html
https://arxiv.org/abs/1608.01725

This involves:
1. Add a CONFIG_TAXONOMY compile option. Enabling taxonomy incurs
   a memory overhead of up to several kilobytes per associated
   station.
2. If enabled, store the Probe Request and (Re)Associate Request frame in
   struct sta_info.
3. Implement code to extract the ID of each Information Element,
   plus selected fields and bitmasks from certain IEs, into a
   descriptive text string. This is done in a new source file,
   src/ap/taxonomy.c.
4. Implement a "signature qq:rr:ss:tt:uu:vv" command
   in hostapd_cli to retrieve the signature.

Signatures take the form of a text string. For example, a signature
for the Nexus 5X is:
  wifi4|probe:0,1,127,45,191,htcap:01ef,htagg:03,htmcs:0000ffff,vhtcap:338061b2,
  vhtrxmcs:030cfffa,vhttxmcs:030cfffa,extcap:00000a0201000040|assoc:0,1,48,45,
  221(0050f2,2),191,127,htcap:01ef,htagg:03,htmcs:0000ffff,vhtcap:339071b2,
  vhtrxmcs:030cfffa,vhttxmcs:030cfffa,extcap:0000000000000040

Signed-off-by: dgentry@google.com (Denton Gentry)
Signed-off-by: denny@geekhold.com (Denton Gentry)
Signed-off-by: rofrankel@google.com (Richard Frankel)
Signed-off-by: richard@frankel.tv (Richard Frankel)
2016-09-22 00:45:24 +03:00
Jouni Malinen
30e0745bf7 Fix TRACK_STA_LIST before BSS enabled
This hostapd control interface command could hit a NULL pointer
dereference if issued before the BSS was enabled.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-19 16:26:48 +03:00
Erik Ljungberg
4d7aab78bd Make driver flags available through control interface
This shows the current set of driver flags in wpa_cli and hostapd_cli.

Signed-off-by: Erik Ljungberg <erik.ljungberg@sonymobile.com>
2016-07-23 20:46:20 +03:00
Jouni Malinen
f367c08dd5 Mark internal functions static
These functions are not called outside this file.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-24 19:02:58 +03:00
Jouni Malinen
50a17a76e1 tests: Declare module test functions in a header file
This gets rid of number of warnings from sparse.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-23 18:26:09 +03:00
Jouni Malinen
0e672b89e7 trace: Define externs in a header file
This gets rid of some unnecessary strace warnings from test builds.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-23 13:28:54 +03:00
David Spinadel
220754c553 hostapd: Add FTM range request
Add FTM range request via RRM. The AP sends Radio measurement request
with FTM range request as a request for the receiving STA to send FTM
requests to the given list of APs. The neighbor report part of the
request is taken from the neighbor database.

The control interface command is:

REQ_RANGE <dst addr> <rand_int> <min_ap> <responder> [<responder>..]

dst addr: MAC address of an associated STA
rand_int: Randomization Interval (0..65535) in TUs
min_ap: Minimum AP Count (1..15); minimum number of requested FTM ranges
	between the associated STA and the listed APs
responder: List of BSSIDs for neighboring APs for which a measurement
	is requested

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-17 12:29:12 +03:00
David Spinadel
f4f185a224 hostapd: Add LCI request
Add a hostapd control interface command REQ_LCI to request LCI from an
associated station using radio measurement.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-17 12:29:12 +03:00
David Spinadel
9b4b226426 hostapd: Add a database of neighboring APs
Add a configurable neighbor database that includes the content of
Nighbor Report element, LCI and Location Civic subelements and SSID.

All parameters for a neighbor must be updated at once; Neighbor Report
element and SSID are mandatory, LCI and civic are optional. The age of
LCI is set to the time of neighbor update.

The control interface API is:
SET_NEIGHBOR <BSSID> <ssid=SSID> <nr=data> [lci=<data>] [civic=<data>]

To delete a neighbor use:
REMOVE_NEIGHBOR <BSSID> <SSID>

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-16 21:05:40 +03:00
Jouni Malinen
1854eeca19 Add POLL_STA command to check connectivity in AP mode
The hostapd "POLL_STA <addr>" control interface command can be used to
check whether an associated station ACKs a QoS Data frame. The received
ACK for such a frame is reported as an event message ("AP-STA-POLL-OK
<addr>").

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-04-09 00:30:49 +03:00
Masashi Honma
4c522c7798 PMKSA: Flush AP/mesh PMKSA cache by PMKSA_FLUSH command
This extends the wpa_supplicant PMKSA_FLUSH control interface command to
allow the PMKSA list from the authenticator side to be flushed for AP
and mesh mode. In addition, this adds a hostapd PMKSA_FLUSH control
interface command to flush the PMKSA entries.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-03-20 17:37:53 +02:00
Masashi Honma
b8daac18a4 PMKSA: Show AP/mesh PMKSA list in PMKSA command
This extends the wpa_supplicant PMKSA control interface command to allow
the PMKSA list from the authenticator side to be listed for AP and mesh
mode. In addition, this adds a hostapd PMKSA control interface command
to show the same list for the AP case.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-03-20 17:37:53 +02:00
Janusz Dziedzic
3e67171846 hostapd: Add global TERMINATE command
This will terminate the hostapd process.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:50 +02:00
Janusz Dziedzic
618f5d01b0 hostapd: Add INTERFACES ctrl_iface command
Return a list of the available interfaces (the main BSS) and optionally
with ctrl_iface when the optional "ctrl" parameter is included. This is
useful when using UDP ctrl_iface and add interfaces using the ADD
command. After that we need to know which UDP port was assigned for the
control interface for the added interface.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:50 +02:00
Janusz Dziedzic
180e5b96c3 hostapd: Update ctrl_interface for UDP to include the selected port
Set up the real ctrl_interface for UDP after having selected the port.
This is in format: udp:<port_no>. This is needed to get accurate
interface <-> udp_port mapping.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:49 +02:00
Janusz Dziedzic
b9066c638a hostapd: Allow UDP ctrl_iface configuration to set the UDP port
This allows the UDP port to be set for the per-interface and global
control interfaces. The format is: udp:<port_no>

For example:
hostapd -ddt -g udp:8888

And in the configuration file:
ctrl_interface=udp:8877

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:43 +02:00
Janusz Dziedzic
56885eecf4 hostapd: Add UDP support for ctrl_iface
Add UDP support for ctrl_iface:

New config option could be set:
CONFIG_CTRL_IFACE=udp
CONFIG_CTRL_IFACE=udp-remote
CONFIG_CTRL_IFACE=udp6
CONFIG_CTRL_IFACE=udp6-remote

And hostapd_cli usage:
hostapd_cli -i localhost:8877

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:37 +02:00
Janusz Dziedzic
acf57fae76 ctrl_iface_common: Use sockaddr_storage instead of sockaddr_un
This is a step towards allowing UDP sockets to be used with the common
implementation.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:15:05 +02:00
Janusz Dziedzic
89b781bc89 hostapd: Use common functions for ctrl_iface
Use the common functions, structures when UNIX socket ctrl_iface used.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:15:05 +02:00
Avraham Stern
c0e2a172a7 hostapd: Add MBO IE to BSS Transition Management Request frame
Add an option to add MBO IE to BSS Transition Management Request frame.
The MBO IE includes the transition reason code, cellular data connection
preference, and, if the disassoc imminent bit is set, it may also
include re-association retry delay. Otherwise, the re-association retry
delay should be set to zero.

The additional BSS_TM_REQ argument uses the following format:
mbo=<reason>:<reassoc delay>:<cell pref>
reason: 0-9
reassoc delay: 0-65535 (seconds; 0 = disabled)
cell pref: 0, 1, 255

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-02-22 19:53:04 +02:00
Avraham Stern
fb9a1c3e28 hostapd: Add MBO IE to Beacon, Probe Response, Association Response
Add MBO IE with AP capability attribute to Beacon, Probe Response, and
(Re)Association Response frames to indicate the AP supports MBO.

Add option to add Association Disallowed attribute to Beacon, Probe
Response, and (Re)Association Response frames. Usage:

SET mbo_assoc_disallow <reason code>

Valid reason code values are between 1-5. Setting the reason code to
0 will remove the Association Disallowed attribute from the MBO IE
and will allow new associations.

MBO functionality is enabled by setting "mbo=1" in the config file.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-02-22 19:53:04 +02:00
Roy Marples
640b0b933a ctype functions require an unsigned char
Ensure that characters are represented as unsigned char when using
isblank() and isspace(). These function take in a "int c" argument, but
it needs to be unsigned for the cases where EOF is not indicated.

Signed-off-by: Roy Marples <roy@marples.name>
2016-02-18 17:39:00 +02:00
Michael Braun
1889af2e0f VLAN: Separate station grouping and uplink configuration
Separate uplink configuration (IEEE 802.1q VID) and grouping of stations
into AP_VLAN interfaces.

The int vlan_id will continue to identify the AP_VLAN interface the
station should be assigned to. Each AP_VLAN interface corresponds to an
instance of struct hostapd_vlan that is uniquely identified by int
vlan_id within an BSS.

New: Each station and struct hostapd_vlan holds a struct
vlan_description vlan_desc member that describes the uplink
configuration requested. Currently this is just an int untagged IEEE
802.1q VID, but can be extended to tagged VLANs and other settings
easily.

When the station was about to be assigned its vlan_id, vlan_desc and
vlan_id will now be set simultaneously by ap_sta_set_vlan(). So
sta->vlan_id can still be tested for whether the station needs to be
moved to an AP_VLAN interface.

To ease addition of tagged VLAN support, a member notempty is added to
struct vlan_description. Is is set to 1 if an untagged or tagged VLAN
assignment is requested and needs to be validated. The inverted form
allows os_zalloc() to initialize an empty description.

Though not depended on by the code, vlan_id assignment ensures:
  * vlan_id = 0 will continue to mean no AP_VLAN interface
  * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id
    with no per_sta_vif and no extra tagged vlan.
  * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans.

This way struct wpa_group and drivers API do not need to be changed in
order to implement tagged VLANs or per_sta_vif support.

DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only,
thus grouping of the stations for per_sta_vif can be used with
DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct
hostapd_vlan is still used to manage AP_VLAN interfaces.

MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of
VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will
continue to refer to int vlan_id.

Renaming vlan_id to vlan_desc when type changed from int to struct
vlan_description was avoided when vlan_id was also used in a way that
did not depend on its type (for example, when passed to another
function).

Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN
%d" will refer to untagged IEEE 802.1q VID.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-02-17 11:46:11 +02:00
Jouni Malinen
a65a9b8d67 hostapd: Add mechanism to track unconnected stations
hostapd can now be configured to track unconnected stations based on
Probe Request frames seen from them. This can be used, e.g., to detect
dualband capable station before they have associated. Such information
could then be used to provide guidance on which colocated BSS to use in
case of a dualband AP that operates concurrently on multiple bands under
the control of a single hostapd process.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 17:11:11 +03:00
Jouni Malinen
137b293963 Remove unnecessary NULL check from LOG_LEVEL handler
cmd cannot be NULL here, so there is no need to check it before calling
os_strlen().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-22 00:22:12 +03:00
Srinivas Dasari
5c4f0511a2 hostapd: Add support to configure debug log level at runtime
Add support to read/configure log_level using hostapd control interface
LOG_LEVEL command similarly to what was already supported in
wpa_supplicant.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-03 17:50:09 +03:00
Jouni Malinen
ff7a4bd13f FST: Do not replace previous attachment
hapd->iface->fst must not be overridden if it is already pointing to FST
instance. Without this, duplicated FST-ATTACH could result in memory
leak and process termination.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-25 19:52:27 +03:00
Jouni Malinen
ceb8a79c33 FST: Use -EINVAL instead of EINVAL as return value
This is more consistent with other error cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-25 19:50:43 +03:00
Jouni Malinen
63e169e149 hostapd: Mark config parameter name const
The functions parsing configuration parameters do not modify the name of
the parameter, so mark that function argument constant. In theory, the
value should also be const, but at least for now, number of the parser
functions end up modifying this to simplify parsing.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-21 13:56:19 +03:00
Anton Nayshtut
748febf344 hostapd: Add DUP_NETWORK global control interface command
This adds a new global control interface command DUP_NETWORK with the
following syntax:

DUP_NETWORK src_ifname dst_ifname param

The currently supported parameters:
  wpa
  wpa_key_mgmt
  wpa_pairwise
  rsn_pairwise
  wpa_passphrase
  wpa_psk

The specified configuration parameter is copied from the source
interface to the destination interface. The main use for this is to
allow cloning of security configuration without having to expose the
keys from the hostapd process.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-21 13:42:16 +03:00
Anton Nayshtut
c497a024a2 hostapd: Introduce hostapd_ctrl_iface_get_key_mgmt()
This function will be used in DUP_NETWORK command implementation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-21 13:33:21 +03:00
Anton Nayshtut
b328145296 hostapd: Introduce hostapd_interfaces_get_hapd()
This function will be used in DUP_NETWORK command implementation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-21 13:24:36 +03:00
Mohammed Shafi Shajakhan
de7581ef68 hostapd: Add current wpa parameter into GET_CONFIG output
This can be used, e.g., by an action script to update new WPS
settings for the AP.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
2015-07-18 00:17:34 +03:00
Jouni Malinen
780753fab2 FST: Clear hostapd fst_ies on FST-DETACH to avoid use of freed memory
This is needed in the corner case of FST-DETACH being used without
stopping the AP instance.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 16:29:20 +03:00
Anton Nayshtut
6990d41a74 hostapd: Add global to local control interface redirection
This patch implements global to local control interface redirection in
the same way as it's done for wpa_supplicant. Any global control
interface command beginning with "IFNAME=..." will be routed to the
corresponding local control interface handler.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 20:21:18 +03:00
Anton Nayshtut
585478e2b9 hostapd: Add hostapd_ctrl_iface_receive_process()
The newly introduced function will be used in followup commits to handle
requests redirected from the global control interface.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 20:21:00 +03:00
Anton Nayshtut
8e9a8b0f8c FST: hostapd control interface
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Anton Nayshtut
ee1e3f57b5 hostapd: Global control interface notifications
This commit implements hostapd global control interface notifications
infrastructure. hostapd global control interface clients issue
ATTACH/DETACH commands to register and deregister with hostapd
correspondingly - the same way as for any other hostapd/wpa_supplicant
control interface.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 12:33:29 +03:00
Jouni Malinen
3722c0f4aa Add EAPOL_SET hostapd command to configure EAPOL parameters
This new control interface command "EAPOL_REAUTH <MAC address>
<parameter> <value>" can be used to implement the IEEE 802.1X PAE
Set Authenticator Configuration operation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-12 11:34:18 +03:00
Jouni Malinen
cfb5c08f21 Add EAPOL_REAUTH hostapd command to trigger EAPOL reauthentication
This new control interface command "EAPOL_REAUTH <MAC address>" can be
used to implement the IEEE 802.1X PAE Reauthenticate operation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-12 11:33:33 +03:00
Jouni Malinen
66f1e078e7 DATA_TEST_TX: Avoid ubsan warning on 0x80<<24 not fitting in int
Use unsigned constant instead of signed to avoid warning with the LSB
being set in an int.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 16:25:06 +03:00