Commit graph

120 commits

Author SHA1 Message Date
Jouni Malinen
2265376271 tests: INTERWORKING_ADD_NETWORK
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 22:49:58 +02:00
Matti Gottlieb
83e1bab022 tests: Fix destination address in ap_hs20_remediation_required_ctrl
Fix the destination address that is sent in the WNM-Notification to be
the BSS address opposed to the P2P address.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
2015-02-05 13:48:40 +02:00
Jouni Malinen
55c430b63c tests: Add capture file validation for IPv6 in proxyarp_open
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 21:55:46 +02:00
Jouni Malinen
efd0a6fbf1 tests: Add capture file validation for IPv4 in proxyarp_open
Verify that the expected frames were seend and unexpected frames
weren't.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 18:55:22 +02:00
Jouni Malinen
210a4f6a13 tests: Add another bridge port to proxyarp_open
Use another AP instance as a separate bridge port in the proxyarp_open
test cases to increase testing coverage for kernel proxyarp
functionality.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 18:55:22 +02:00
Jouni Malinen
87f0ede914 tests: Add brctl showmacs output to proxyarp_open test cases
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 18:55:22 +02:00
Jouni Malinen
9934ee1967 tests: Run the proxyarp_open test case both with and without ebtables
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-30 18:55:22 +02:00
Jouni Malinen
57f08b3f3a tests: Make ap_anqp_sharing more robust
This test case uses get_bss() with a BSSID to find a BSS entry. That can
result in failures if there are multiple BSS entries in wpa_supplicant
BSS table for the same BSSID, e.g., due to an earlier hidden SSID test
case. Explicitly clear the cfg80211 and wpa_supplicant scan caches at
the beginning of this test case to make it less likely for earlier test
cases to trigger a failure here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 12:50:20 +02:00
Jouni Malinen
092ac7bb0e tests: Hotspot 2.0 ANQP fetch with hidden SSID BSS entry
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 12:50:20 +02:00
Jouni Malinen
7e3a6c9e21 tests: Mark proxyarp_open as skip if traffic test fails
This step requires kernel changes that are not yet in upstream Linux
tree, so mark this as skip rather than failure for now.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-17 17:15:42 +02:00
Jouni Malinen
27f527e0e2 tests: ap_hs20_fetch_osu: Print osu-providers.txt in debug log
This makes it easier to figure out what happened if the test case fails
due to not finding all the needed OSU-PROVIDER information.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-17 16:03:43 +02:00
Jouni Malinen
e912e4bc92 tests: Interworking auto_interworking=1 with mismatching BSS
This is a regression test case to detect a failure that resulted in an
up to five second busy loop through wpa_supplicant_fast_associate() when
interworking_find_network_match() and wpa_supplicant_select_bss() get
different matching results.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-17 01:53:44 +02:00
Jouni Malinen
e1f8fe8851 tests: INTERWORKING_CONNECT after having found hidden SSID AP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-15 12:29:02 +02:00
Jouni Malinen
24579e7047 tests: Split domain_suffix_match test cases based on match type
With GnuTLS, domain_suffix_match is currently requiring full match, so
split the test cases in a way that can be reported more cleanly as PASS
or SKIP based on TLS library behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
524c6c33bc tests: Add ca_cert to username/password Hotspot 2.0 credentials
Proper configuration should be used here to get server validation
enabled, so update the test cases to provide the ca_cert parameter. This
was included in number of existing test cases, but not all.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
3b51cc6359 tests: Skip EAP-pwd and EAP-FAST test cases if not supported
Check wpa_supplicant EAP capability and skip EAP-pwd and EAP-FAST test
cases if the build did not include support for these. This is cleaner
than reporting failures for such test cases when the selected TLS
library does not support the EAP method.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
81e787b750 tests: Convert test skipping to use exception
Instead of returning "skip" from the test function, raise the new
HwsimSkip exception to indicate a test case was skipped.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-08 22:43:47 +02:00
Jouni Malinen
01c87519a3 tests: Do not mark proxyarp_open failed if ebtables is not available
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 17:14:00 +02:00
Jouni Malinen
5f35a5e27f tests: Add wait_connected() and wait_disconnected() helpers
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:10:09 +02:00
Jouni Malinen
89cd4355bb tests: Fix proxyarp_open IPv4-from-bridge
There were couple of typos in the IP addresses and there was no coverage
for the normal unicast ARP response from the bridge (since non-wireless
device does not get proxied by the AP). In addition, it is better to
change the IP address used here to be unique to make the sniffer logs
easier to interpret.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-18 16:41:40 +02:00
Jouni Malinen
6d5332948c tests: Use send_ns() helper for the earlier proxyarp_open NS packets
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
40e4c9c8b0 tests: Add traffic test to proxyarp_open
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
5a3ce80265 tests: ProxyARP behavior with IPv6 frames
This adds transmission of number of NS/NA frames to test ProxyARP
behavior. The actual validation of the AP behavior is still manual,
i.e., a separate inspectation of the capture files is needed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
19cbe06238 tests: Add ebtables rules for ProxyARP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
a95c6973aa tests: Use non-promiscuous mode and packet-buffered tcpdump capture
This helps in avoiding truncated capture files in the proxyarp_open test
case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
69f9912310 tests: Additional FETCH_OSU and CANCEL_FETCH_OSU coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 02:28:03 +02:00
Jouni Malinen
909f13cc52 tests: Move 'SET pmf 0' from reset() to test cases
This avoids one more cleanup step between most test cases by clearing
the default PMF behavior change only in case it was actually modified
during a test.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 02:28:03 +02:00
Jouni Malinen
44c41cdf47 tests: Additional HS20_ICON_REQUEST coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 16:14:24 +02:00
Jouni Malinen
ea215c54d0 tests: Additional coverage for HS20_GET_NAI_HOME_REALM_LIST
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 16:12:59 +02:00
Jouni Malinen
7e71fbc169 tests: INTERWORKING_CONNECT with invalid parameter
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 15:18:11 +02:00
Jouni Malinen
d9f3bb1ad6 tests: ProxyARP ARP processing
This verifies processing of various ARP messages at an AP that enables
ProxyARP. All the validation steps have not yet been scripted, i.e., the
sniffer traces need manual analysis for full coverage.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-11 15:18:11 +02:00
Jouni Malinen
76b7694177 tests: Multiple networks and cred removal
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Jouni Malinen
d463c5566f tests: Additional coverage for SCAN_RESULTS and BSS entry flags
This increases wpa_supplicant_ie_txt(), print_bss_info(), and
wpa_supplicant_ctrl_iface_scan_result() testing coverage to include the
previously missing key management options.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:06 +02:00
Jouni Malinen
243dcc4ae4 tests: Add a helper function for clearing scan cache
This makes it more convenient and consistent to clear the cached scan
results from cfg80211 and wpa_supplicant.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-01 12:20:53 +02:00
Jouni Malinen
e4d7b5134e tests: Move hessid and access_network_type reset to test case
This removes unnecessary reset() steps from between every test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
47dcb1186f tests: Move external_sim reset to test cases that change this
This removes unnecessary reset() step from between every test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
a712282bc1 tests: proxyarp with DHCP snooping
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
356a497d39 tests: ProxyARP with DGAF disabled and multicast-to-unicast conversion
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 22:41:26 +02:00
Jouni Malinen
67aeee118a tests: Convert proxyarp tests to use DATA_TEST_FRAME
This is more robust and extensible than configuring IPv6 addresses on
the interfaces and trying to use ping6 or some other external tools to
generate suitable IPv6 frames.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 20:00:14 +02:00
Jouni Malinen
5f7b07de91 tests: ProxyARP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-26 01:37:54 +02:00
Jouni Malinen
0a5787162a tests: Make ap_hs20_fetch_osu more robust under heavy load
Use scan_for_bss() instead of scan() to avoid errors if the active scan
fails, e.g., due to heavy load under parallel-vm.sh test run.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 12:38:18 +03:00
Jouni Malinen
64502039c0 tests: Make ap_hs20_session_info more robust
It looks like mac80211 scan-while-associated can now take over 10
seconds with the current wireless-regdb rules for world roaming due to
number of additional DFS channel having been enabled for passive
scanning. This resulted in ap_hs20_session_info failing due to the wait
for the scan result event timing out. That is not really a real failure,
so increase the timeout to avoid reporting this incorrectly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-10 00:37:07 +03:00
Jouni Malinen
4a7d73d161 tests: Make ap_hs20_random_mac_addr more robust
If the previuous test case used a non-RSN AP and that was left in
cfg80211 scan results, it was possible for ap_hs20_random_mac_addr to
pick that old AP from the previous test and reject to connect through
Hotspot 2.0 mechanisms. Work around this test issue by requesting new
set of scan result at the beginning of the test.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-28 17:51:09 +03:00
Jouni Malinen
816e3df972 tests: Random MAC address use
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 20:07:55 +03:00
Jouni Malinen
852cb016d2 tests: Make ap_hs20 test cases more robust
Some of the test cases where using INTERWORKING_SELECT internally
without using scan_for_bss like the helper functions did. Add explicit
scan_for_bss calls to make the test cases less likely to fail due to
missing BSSes in scan results. This could cause false failure reports
when runnign under heavy load with parallel-vm.sh.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 16:12:41 +03:00
Jouni Malinen
f1a36a53a5 tests: update_identifier in network block
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-07-02 15:51:20 +03:00
Jouni Malinen
bedb6ea54f tests: Verify auto_interworking=1 with partiall matching network
This is a regression test for an issue where scanning sequence could be
terminated if interworking_find_network_match() finds a matching
network, but wpa_s->auto_select is not set. This could stop connection
attempts when auto_interworking=1 is used and the scan results have a
partially matching network and no cred match.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-31 13:25:12 +03:00
Jouni Malinen
350a7ba90f tests: HS 2.0 remediation required from SQL user DB
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-28 00:56:13 +03:00
Jouni Malinen
841bed04de tests: Make HS 2.0 test cases more robust
Scan explicitly for the AP that may be started during the test case
execution. This is needed to work around issues where under heavy CPU
load, the single active scan round may miss the delayed Probe Response
from the second AP.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:49 +03:00
Jouni Malinen
37ffe7c568 tests: HS 2.0 with FT
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-10 16:17:41 +03:00