Commit graph

1069 commits

Author SHA1 Message Date
Jouni Malinen
7137456941 Move TLS_FUNCS and NEED_CRYPTO segment next to each other 2009-10-11 20:34:26 +03:00
Jouni Malinen
9d388d5007 Further crypto makefile unification 2009-10-11 20:31:15 +03:00
Jouni Malinen
0dba0175c5 Fix crypto config for minimal builds 2009-10-11 20:19:12 +03:00
Jouni Malinen
000bbd77c9 Cleaned up and unified some of the crypto Makefile code 2009-10-11 19:42:04 +03:00
Jouni Malinen
f042122a57 Allow the internal DH implementation to be overridden
Crypto library wrappers can now override the internal DH (group 5)
implementation. As a starting point, this is done with OpenSSL. The
new mechanism is currently available only for WPS (i.e., IKEv2 still
depends on the internal DH implementation).
2009-10-11 19:17:22 +03:00
Jouni Malinen
dd01b1ff9d Include only the used DH groups in the build
This reduces the binary size by 3 kB or so when WPS is included in
the build, but IKEv2 is not.
2009-10-11 15:24:40 +03:00
Jouni Malinen
b3ad11bb80 nl80211: Add parsing of NL80211_BSS_SEEN_MS_AGO into scan results 2009-10-01 17:53:22 +03:00
Jouni Malinen
d942a79e6a nl80211: Recognize NL80211_CMD_TRIGGER_SCAN events
Replace "nl80211: Ignored unknown event (cmd=33)" with
"nl80211: Scan trigger" to make debug output clearer. We do not
currently do anything with this event apart from showing it in
the debug log.
2009-10-01 13:58:17 +03:00
Blaž Bačnik
1066c1ee3c Fix VLAN ID validation check to use the new VLAN ID
When checking the validity of VLAN ID based on RADIUS-based ACL or
accept_mac_file, the assigned vlan_id, not the old sta->vlan_id
(likely zero) needs to be used.
2009-09-30 20:44:04 +03:00
Jouni Malinen
ebf214e670 NSS: Implement TLS PRF using new TLS extractor interface
This allows NSS to be used to derive EAP-TLS/PEAP/TTLS keying material.
NSS requires a patch from
https://bugzilla.mozilla.org/show_bug.cgi?id=507359
to provide the new API. In addition, that patch needs to be modified to
add the 16-bit context length value in SSL_ExportKeyingMaterial() only if
contextlen != 0 in order to match with the EAP-TLS/PEAP/TTLS use cases.
This issue seems to be coming from the unfortunate incompatibility in
draft-ietf-tls-extractor-07.txt (draft-ietf-tls-extractor-00.txt would
have used compatible PRF construction).

At this point, it is unclear how this will be resolved eventually, but
anyway, this shows a mechanism that can be used to implement EAP key
derivation with NSS with a small patch to NSS.
2009-09-30 20:12:32 +03:00
Author: Johannes Berg
1c766b094a nl80211: Fix a typo in set_sta_vlan()
The VLAN interface index needs to use NL80211_ATTR_STA_VLAN. It was
adding a duplicate NL80211_ATTR_IFINDEX.
2009-09-30 19:23:52 +03:00
Jouni Malinen
9fac49c15c Fix wpa_passphrase build with NSS 2009-09-30 19:14:43 +03:00
Jouni Malinen
d094741c5a wpa_gui-qt4: Add pending WPS PIN queries into peer dialog
Whenever running wpa_supplicant in AP mode with WPS enabled, the
notifications of missing WPS PIN are now shown on the peer dialog
to make it easier to provide the PIN.
2009-09-29 23:16:21 +03:00
Jouni Malinen
4f760fcc7c Fix hostapd wpa_msg() calls ctx for wpa_supplicant AP mode
Need to use wpa_s pointer, not hapd pointer, for these calls.
2009-09-29 21:25:14 +03:00
Jouni Malinen
acfbf1f5d7 wpa_gui-qt4: Fix peer_role_address for AP entry 2009-09-29 20:51:45 +03:00
Jouni Malinen
b55aaa5fdf Allow IBSS/AP mode networks to be created in ap_scan=1 mode
If no BSSes/IBSSes matching the enabled networks are found in the scan
results, IBSS/AP mode network (if configured) can be created in
ap_scan=1 mode instead of requiring ap_scan=2 mode to be used whenever
using IBSS or AP mode.
2009-09-29 17:11:36 +03:00
Jouni Malinen
09b9df4e4a Split wpa_supplicant_event_scan_results() into helper functions 2009-09-29 14:30:11 +03:00
Jouni Malinen
289ffc2b61 Add preliminary version of NSS TLS/crypto wrapper for wpa_supplicant
This brings in the first step in adding support for using NSS
(Mozilla Network Security Services) as the crypto and TLS library
with wpa_supplicant. This version is able to run through EAP-PEAP
and EAP-TTLS authentication, but does not yet implement any
certificate/private key configuration. In addition, this does not
implement proper key fetching functions either, so the end result
is not really of much use in real world yet.
2009-09-29 01:21:09 +03:00
Masashi Honma
f335c69e14 DragonFly BSD: Fix wired IEEE 802.1X
On DragonFly BSD, wired IEEE 802.1X fails with this message:
ioctl[SIOC{ADD/DEL}MULTI]: Invalid argument

This patch solves this issue.

I have tested with these:
OS : DragonFly BSD 2.4.0
EAP : EAP-TLS
Switch : Cisco Catalyst 2950
2009-09-28 16:10:02 +03:00
Jouni Malinen
c140a22858 Remove the STA entry on reassociation to clear STA PS state
hostapd needs to remove the old STA entry if it exists when processing
reassociation back to the same AP. This removes the potentially PS
buffered frames and allows association parameters to be updated with
mac80211.
2009-09-26 21:30:43 +03:00
Masashi Honma
40e107c129 Mac OS X: Fix wired IEEE 802.1X 2009-09-26 19:29:03 +03:00
Jouni Malinen
2aa5f84709 nl80211: Use defines for NL80211_KEY_CIPHER values 2009-09-15 11:23:48 +03:00
Jouni Malinen
d723bab4b3 Revert "nl80211: Share the same routine for NL80211_ATTR_KEY_CIPHER setup"
This reverts commit 5aa9cb5cca.

The nested key attribute is using different attribute values
(NL80211_KEY_* vs. NL80211_ATTR_KEY_*), so cannot share the same routine
for these purposes..
2009-09-15 11:21:25 +03:00
Jouni Malinen
5aa9cb5cca nl80211: Share the same routine for NL80211_ATTR_KEY_CIPHER setup 2009-09-15 10:54:41 +03:00
Johannes Berg
0194fedb46 driver_nl80211: Fix MLME key settings for static WEP
Current wpa_supplicant has a bug with WEP keys, it adds a zero-length
sequence counter field to netlink which the kernel doesn't accept.

Additionally, the kernel API slightly changed to accept keys only when
connected, so we need to send it the keys after that. For that to work
with shared key authentication, we also include the default WEP TX key
in the authentication command.

To upload the keys properly _after_ associating, add a new flag
WPA_DRIVER_FLAGS_SET_KEYS_AFTER_ASSOC_DONE indicating that the driver
needs the keys at that point and not earlier.
2009-09-15 10:48:30 +03:00
Jouni Malinen
60b94c9819 Add preliminary background scan and roaming module design
This allows background scanning and roaming decisions to be contained in
a single place based on a defined set of notification events which will
hopefully make it easier to experiment with roaming improvements. In
addition, this allows multiple intra-ESS roaming policies to be used
(each network configuration block can configure its own bgscan module).

The beacon loss and signal strength notifications are implemented for
the bgscan API, but the actual events are not yet available from the
driver.

The included sample bgscan module ("simple") is an example of what can
be done with the new bgscan mechanism. It requests periodic background
scans when the device remains associated with an ESS and has couple of
notes on what a more advanced bgscan module could do to optimize
background scanning and roaming. The periodic scans will cause the scan
result handler to pick a better AP if one becomes available. This bgscan
module can be taken into use by adding bgscan="simple" (or
bgscan="simple:<bgscan interval in seconds>") into the network
configuration block.
2009-09-15 00:08:24 +03:00
Samuel Ortiz
3180d7a208 Getting back to DISCONNECTED afer SCANNING
After transitioning from DISCONNECTED to SCANNING, we never go back
to DISCONNECTED even though scanning is done or failed.
We're thus stuck in SCANNING while scanning is actually done.
2009-09-14 17:25:03 +03:00
Masashi Honma
f1b0de09d9 WPS: Fix CONFIG_WPS=y compilation of wpa_supplicant
The wpa_supplicant compilation failed with CONFIG_WPS=y option
if CONFIG_CLIENT_MLME and CONFIG_IEEE80211R are not used.
2009-09-14 16:50:53 +03:00
Witold Sowa
3e53b314f5 Share same freeing and error checking code in get_scan_results
Convert wpa_supplicant_get_scan_results_old() to use the same return
style with the other get_scan_results options and clean up the code
by sharing the same scan result freeing and error checking code for
all the options.
2009-09-13 22:21:52 +03:00
Witold Sowa
86b89452f6 Use shared functions for network operations and param changes
Instead of implementing these separately in various control
interface handlers, use shared functions. These add some of the
previously missing notification calls, too, for the affected areas.
2009-09-13 21:16:43 +03:00
Jouni Malinen
8bac466b00 Add wpa_supplicant notification calls
This introduces a new mechanism for collecting notification calls into
a single place (notify.c). As a result of this, most of the
wpa_supplicant code does not need to know about dbus (etc. mechanisms
that could use the notifications). Some empty placeholder functions are
also added in preparation of new dbus code that needs more event
notifications.
2009-09-13 20:53:32 +03:00
Witold Sowa
1bd3f426d3 Remove extra whitespace 2009-09-13 20:27:54 +03:00
Jouni Malinen
614ff64fe0 wpa_gui-qt4: Fix WPS AP detection for peer window 2009-09-11 19:06:38 +03:00
Jouni Malinen
b1078a4bfb wpa_gui-qt4: Add scan results into the peer window
In addition, add a peer entry type for each peer entry. Currently,
this is only stored as an integer and visible in the context menu.
Eventually, different icons should be used based on this type.
2009-09-11 18:37:16 +03:00
Jouni Malinen
acd8ba74c0 wpa_gui-qt4: Handle UNKNOWN COMMAND reply during peer window update
Avoid an infinite loop if wpa_supplicant is not built with AP support.
2009-09-11 17:52:46 +03:00
Jouni Malinen
611ed49118 Add parsed information from WPS IE(s) into scan results
This makes it easier for external programs to show WPS information
since they do not need to parse the WPS IE themselves anymore.
2009-09-11 17:14:49 +03:00
Jouni Malinen
e9a2bca6f5 WPS: Add parsing of AP Setup Locked attribute 2009-09-11 17:13:59 +03:00
Jouni Malinen
6e4f461270 Fix driver_test for hostapd
Commit 0b55b934ee broke this by not
initializing drv->ap = 1 in hostapd case since the mode updating
code ended up unlinking the socket file. Setting drv->ap = 1
removes the mode change and as such, unlinking of the socket file.
2009-09-11 16:45:34 +03:00
Jouni Malinen
abad3ccb1e Convert WPS IE concat routine to a generic helper
This may also be needed in wpa_supplicant and potentially for other
IE types, too.
2009-09-11 16:36:59 +03:00
Jouni Malinen
630a843f59 driver_test: Update BSS data when using wpa_supplicant AP mode 2009-09-11 00:22:35 +03:00
Jouni Malinen
0b55b934ee driver_test: Implement set_mode for wpa_supplicant AP deinit 2009-09-11 00:17:35 +03:00
Jouni Malinen
86e9f093a0 driver_test: Preliminary support for wpa_supplicant AP functionality 2009-09-10 17:41:29 +03:00
Jouni Malinen
5d5b99ecd3 driver_test: Share the same deinit() for hostapd and wpa_supplicant 2009-09-10 17:03:51 +03:00
Jouni Malinen
c6f726748d driver_test: Merge socket_dir into test_dir 2009-09-10 16:52:03 +03:00
Jouni Malinen
5ae8964079 driver_test: Some additional merging of send_mlme 2009-09-10 16:48:10 +03:00
Jouni Malinen
133032e7bd driver_test: Claim AP mode capability for wpa_supplicant 2009-09-10 16:30:35 +03:00
Jouni Malinen
ac48db0f2b driver_test: Build most of code in unconditionally
It is simpler to just build in all the test driver code regardless
of whether this is for hostapd or wpa_supplicant (which will eventually
get AP mode support with driver_test, too).
2009-09-10 16:28:47 +03:00
Jouni Malinen
41aeddf99a driver_test: Merge wpa_supplicant and hostapd data structures
There is no real need to keep these in separate data structures with
different names.
2009-09-10 16:18:04 +03:00
Jouni Malinen
6a88ae863f wpa_gui-qt4: Add context menu for peers dialog
Replace the clicked() event with more appropriate context menu
and add a WPS PIN entry as an example command.
2009-09-10 14:43:08 +03:00
Alex Badea
7598210b79 radius_server: clean up completed sessions sooner
radius_server_encapsulate_eap() resets sess->eap->if->eap{Success,Fail}
to FALSE, such that the completion condition is never true.

The net effect is that completed sessions would linger for
RADIUS_SESSION_TIMEOUT seconds.

Signed-off-by: Alex Badea <vamposdecampos@gmail.com>

Previously, the default settings allowed 100 sessions in 60 seconds.
With this fix, the default limit is now 100 sessions per 10 seconds.
[Bug 329]
2009-09-09 23:54:03 +03:00