Commit graph

119 commits

Author SHA1 Message Date
Jouni Malinen
d283f7aeac tests: Increase timeout in wpas_mesh_password_mismatch
There has been number of failures from this test case due to the
MESH-SAE-AUTH-FAILURE event from dev[0] and dev[1] arriving couple of
seconds after the one second timeout after the dev[2] events. This does
not look like a real issue, so increase the timeout to five seconds to
make this less likely to show false failures during testing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-11 20:08:39 +02:00
Jouni Malinen
a8ef83f49d tests: Mesh network and SELECT_NETWORK
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-10-09 17:09:56 +03:00
Jouni Malinen
5c30a84b91 tests: mode=mesh in STATUS
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-22 23:20:48 +03:00
Jouni Malinen
b136894fb0 tests: MPM protocol testing - CLS_ACPT event in OPN_SNT
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-29 01:56:26 +03:00
Jouni Malinen
434f8f7f82 tests: MPM protocol testing - CLS_ACPT event in CNF_RCVD
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-29 01:49:42 +03:00
Jouni Malinen
68f326d5fc tests: Mesh MPM FSM and HOLDING state event OPN_ACPT
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-29 01:43:50 +03:00
Jouni Malinen
09d554d1a6 tests: Secure mesh network connectivity failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-28 20:52:21 +03:00
Jouni Malinen
c3456015fd tests: Mesh peering management protocol testing for peer addition
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-28 20:52:04 +03:00
Jouni Malinen
d80d8c6ffc tests: Open mesh network connectivity, no_auto on both peers
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-28 20:44:58 +03:00
Jouni Malinen
e18d170848 tests: wpa_state == COMPLETED in mesh
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-24 19:02:58 +03:00
Jouni Malinen
51435515fb tests: mesh_scan_oom to support partial BSS result reporting
The next commit modifies the BSS command behavior to report partial
results for a BSS, so mesh_scan_oom needs to allow a BSS entry to be
returned as long as it does not include the mesh information.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-19 23:48:07 +03:00
Jouni Malinen
94e8fe90c2 tests: Mesh with various pairwise and group ciphers
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-19 20:18:09 +03:00
Jouni Malinen
074f72849f tests: Secure mesh network connectivity with PMF enabled
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-18 12:20:50 +03:00
Jouni Malinen
7309e804cf tests: Make mesh_missing_mic more robust
Check for MESH-PEER-CONNECTED from dev[1] before reporting MGMT-RX
timeout errors from dev[0]. This avoids false failures in case the short
0.01 s timeout at the end of the loop was not long enough to catch the
message.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-17 02:05:10 +03:00
Jouni Malinen
0b1b2044cc tests: Add sniffer check to wpas_mesh_max_peering
This verifies that the Accepting Additional Mesh Peerings field is being
cleared properly when the maximum peer links count is reached.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-13 00:04:47 +03:00
Jouni Malinen
a3bd53273e tests: Additional coverage in mesh_sae_groups_invalid
Additional coverage in mesh_rsn_sae_group() with non-zero
wpa_s->mesh_rsn->sae_group_index.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-12 17:56:02 +03:00
Jouni Malinen
739fd20cc3 tests: Mesh peering management protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 11:43:37 +03:00
Jouni Malinen
81d6e230e3 tests: Secure mesh network and PMKID mismatch
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 11:17:00 +03:00
Jouni Malinen
66bb7d97dd tests: Secure mesh network and missing MIC
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 01:20:28 +03:00
Jouni Malinen
98628b7f07 tests: Mesh and failure to derive random nonce
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 00:24:47 +03:00
Jouni Malinen
044d739bdd tests: Secure mesh network and PMKSA caching failing due to OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 00:20:06 +03:00
Jouni Malinen
e8739be842 tests: Mesh scan element parse error
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 00:13:40 +03:00
Jouni Malinen
699074d30c tests: Mesh network setup failing due to driver command failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 00:13:40 +03:00
Jouni Malinen
521a98a8f6 tests: Mesh and default beacon interval
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 21:47:22 +03:00
Jouni Malinen
ec87430ba1 tests: Extend coverage for mesh OOM testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 21:44:19 +03:00
Jouni Malinen
56d62fc3dd tests: Open mesh network on VHT 160 MHz channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 21:31:51 +03:00
Jouni Malinen
2cf6341e64 tests: Mesh and invalid frequency configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 20:59:39 +03:00
Jouni Malinen
a64476403d tests: Mesh and local failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 00:40:38 +03:00
Jouni Malinen
b0ec3d772a tests: Mesh and local SAE failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 00:30:49 +03:00
Jouni Malinen
f0ee4535d2 tests: Mesh with invalid SAE group configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 00:08:16 +03:00
Jouni Malinen
9ec916e9f4 tests: wpa_supplicant secure MESH and SAE group negotiation
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-30 21:15:30 +03:00
Jouni Malinen
582841689f tests: Secure mesh network setup local failure
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-30 21:10:58 +03:00
Jouni Malinen
4d4cdc3bb2 tests: wpa_supplicant mesh scan results and OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-30 20:03:32 +03:00
Jouni Malinen
aa59370b34 tests: wpa_supplicant mesh with dynamic interface addition failing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-30 01:50:09 +03:00
Jouni Malinen
b15acadcfd tests: Mesh network setup failing due to OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-30 01:05:16 +03:00
Jouni Malinen
df49b90e35 tests: Secure mesh and the first plink Open dropped
This is a regression test case to verify that MTK is calculated properly
also in this unexpected sequence.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-13 20:54:51 +03:00
Jouni Malinen
5a34d359cd tests: Secure mesh network and PMKSA caching
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-20 18:24:29 +02:00
Bob Copeland
fa7f9570f2 tests: Add a test for mesh gate forwarding
This test checks that mesh nodes forward frames for unknown
destinations to the mesh gates.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
2016-03-07 11:05:22 +02:00
Jouni Malinen
fe28ed3f29 tests: Secure mesh network plink counting during reconnection
This verifies that num_plinks is decremented properly if a peer mesh STA
reconnects without closing the link explicitly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-02-06 21:25:52 +02:00
Jouni Malinen
a74a1e4eab tests: Open mesh network on VHT 80+80 MHz channel
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 18:47:40 +02:00
Jouni Malinen
71a3b85fff tests: mesh_basic_rates
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 00:50:17 +02:00
Jouni Malinen
2fca1f67cf tests: Secure mesh network setup failing due to wpa_init() OOM
This is a regression test for incorrect error path behavior that was
fixed in the previous commits.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 21:31:25 +03:00
Jouni Malinen
792eafa047 tests: Make wpas_mesh_password_mismatch more robust
It seems to be possible for dev2 (the one with incorrect password) to
stop retries before either dev0 or dev1 reports the authentication
failure event. For now, allow the test case pass if either dev0 or dev1
reports the event rather than requiring both to report this. The
expected behavior can be fine-tuned in the future if the reporting
behavior is modified to be more consistent.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-12 15:50:52 +02:00
Jouni Malinen
f77d6d4bd8 tests: Mesh authentication failure events
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 13:25:35 +02:00
Jouni Malinen
0ff7afbc42 tests: Verify mesh support for wpas_add_set_remove_support
This test case fails if wpa_supplicant is built without mesh support, so
need to check for this.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
2f0347954a tests: Check mesh capability based on the modes capabilities list
This is more robust than checking the driver capability because it is
also possible for the wpa_supplicant build to be configured without mesh
support regardless of whether the driver supports it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
b9749b6aaa tests: Verify that SAE is supported for test cases requiring it
This makes it more convenient to run tests with wpa_supplicant builds
that do not support SAE (e.g., due to crypto library not providing
sufficient functionality for this).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
70437ae55a tests: Drop mesh_ht_mode parameter from mesh test cases
This network profile parameter will be removed with the cleanup that
makes mesh use shared functions for setting channel parameters. That
will allow HT to be enabled automatically based on driver capabilities.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00
Jouni Malinen
de1d5049dc tests: Mesh in 5 GHz band
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00
Jouni Malinen
81e787b750 tests: Convert test skipping to use exception
Instead of returning "skip" from the test function, raise the new
HwsimSkip exception to indicate a test case was skipped.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-08 22:43:47 +02:00
Jouni Malinen
ce8ca2f9a0 tests: Make wpas_mesh_max_peering more robust
The previous version was enabling all three stations at the same time
and left dev[1] and dev[2] competing on getting connected with dev[0]
that allowed only one pairing. This was not exactly robust and the pass
criteria depended on an extra event from either dev[1] or dev[2]. Fix
that by first connecting dev[0] and dev[1] and only after that, start
dev[2]. This allows proper validation of both the peering limit on
dev[0] and no extra event on dev[2].

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
31705bf4fc tests: Skip mesh test cases if kernel does have CONFIG_MAC80211_MESH
Previously, these test cases were marked as failures, but it is nicer to
mark as skipped if the kernel does not include support for mesh.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
e0cfd223c0 tests: Fix mesh no_auto_peer=1 test cases to allow enough time for retry
If the initial Authentication frame was too early for the peer (i.e.,
NEW_PEER_CANDIDATE event arrived only after the Authentication frame),
wpas_mesh_open_no_auto and wpas_mesh_secure_no_auto test cases were
failing since they waited only for 10 seconds for the connection to be
completed while the retry timer was set to 10-20 seconds on the
authenticator side.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 13:10:22 +02:00
Jouni Malinen
9be2b811d4 tests: Mesh max peering limit
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 11:53:02 +02:00
Jouni Malinen
4b9481bcd8 tests: Remove unnecessary wrap_wpas_mesh_test() complexity
This function did not seem to do anything else apart from making it less
obvious that hwsim_utils.test_connectivity() is called.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 11:52:54 +02:00
Jouni Malinen
8b2600329f tests: Mesh beacon_int parameter
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 23:45:29 +02:00
Jouni Malinen
f1381f99e4 tests: Mesh ht_mode options
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 21:27:22 +02:00
Jouni Malinen
d48b64ba6c tests: Use helper function for adding open mesh network
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 23:34:43 +02:00
Jouni Malinen
7e3614df5c tests: Mesh with dynamic interface
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 23:28:36 +02:00
Jouni Malinen
11ace2ed1f tests: Mesh and missing SAE password
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 15:47:04 +02:00
Jouni Malinen
fba65f7240 tests: Mesh BSS data
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 12:55:43 +02:00
Jouni Malinen
54cacef5eb tests: Mesh sae_groups configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 12:55:40 +02:00
Jouni Malinen
146374019a tests: Add missing test descriptions
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:06 +02:00
Jouni Malinen
5e2a8ec9e7 tests: wpa_supplicant ctrl_iface mesh command error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:06 +02:00
Jouni Malinen
73a2f82887 tests: Increase retry limit and timeout for wpas_mesh_open_no_auto
This test case was failing every now and then due to dev1
(no_auto_peer=1) not receiving the new-peer-candidate event in time
before dev0 has already stopped retries on mesh peering open message.
This sounds somewhat expected with the default 4 * 40 ms = 160 ms
retries and 1000 TU beacon interval. Use maximum timeout 16 * 255 ms =
4080 ms to make this test case less likely to fail.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:30 +02:00
Jouni Malinen
4b57af2aaa tests: Remove duplicated connectivity test from mesh
hwsim_utils.test_connectivity() is already bidirectional test, so there
is no need to run it twice with the devices swapped for the second
iteration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
17ffdf3951 tests: Clear sae_groups to default value in forgotten cases
It was possible for some of the SAE test cases (e.g., ap_ft_sae) to fail
if they were run after the sae_groups test case that left the SAE group
configuration to a value that is not enabled by default. Fix this by
clearing sae_groups setting in the couple of test cases that were not
yet doing this.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-25 15:19:19 +02:00
Jason Mobarak
f54b926baa tests: Mesh HT mode
Change the mesh tests to check for the presence of HT in the scan
results.

[original implementation by Chun-Yeow Yeoh <yeohchunyeow@gmail.com>]
[some fixes by Masashi Honma <masashi.honma@gmail.com>]
Signed-off-by: Ashok Nagarajan <ashok.dragon@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
2014-11-20 17:01:43 +02:00
Javier Lopez
68157c0674 tests: Add test_wpas_mesh test cases
This wpa_supplicant tests include basic tests for:

- Mesh scan
- Mesh group add/remove
- Mesh peer connected/disconnected
- Add/Set/Remove to test mesh mode network
- Open mesh connectivity test
- Secure mesh connectivity test
- no_auto_peer

Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
[no_auto_peer test by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Javier Lopez <jlopex@gmail.com>
2014-11-20 16:31:12 +02:00