Commit graph

59 commits

Author SHA1 Message Date
Jouni Malinen
b0ded7d273 tests: Additional invalid SET_NEIGHBOR coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2021-03-07 12:08:02 +02:00
Jouni Malinen
924c17aad5 tests: hostapd ctrl_iface SHOW_NEIGHBOR while neighbor report disabled
Signed-off-by: Jouni Malinen <j@w1.fi>
2021-03-07 12:05:09 +02:00
Jouni Malinen
8e6a56b6e0 tests: Additional invalid REQ_BEACON cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2021-03-07 12:02:46 +02:00
Jouni Malinen
0747432efd Fix spelling of "unexpected" in messages
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-10-16 12:45:26 +03:00
Johannes Berg
db294952bb tests: Set VHT160 or VHT160-80PLUS80 capability
If we want the test to actually use 160/80+80 we need to explicitly
advertise that we support it ourselves, since the kernel is going to be
a bit more strict about this.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-10 21:12:44 +03:00
Jouni Malinen
0b21877185 tests: Move clear_scan_cache() and set_world_reg() to utils.py
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-18 11:35:32 +03:00
Jouni Malinen
1bba048d78 tests: Move vht_supported() into utils.py
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-18 11:35:32 +03:00
Jouni Malinen
be5dda94e5 tests: Make rrm_beacon_req_table_request more robust
Explicitly clear cfg80211 scan cache to avoid issues with old BSS
entries from previous test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-31 11:51:25 +02:00
Jouni Malinen
4415da686d tests: Make rrm_reassociation more robust
Flush cfg80211 scan cache explicitly when running this test case to
avoid issues with the ROAM command not working due to a scan result from
an earlier test case. This was causing failures in the following test
case sequence:
rrm_beacon_req_active_ap_channels rrm_reassociation

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-27 22:41:36 +02:00
Jouni Malinen
67e0a5180f tests: SHOW_NEIGHBOR
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-26 17:59:16 +02:00
Jouni Malinen
6883f94408 tests: rrm_neighbor_db and neighbor removal without specifying SSID
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-26 11:05:54 +02:00
Masashi Honma
faaaa4e2a9 tests: Fix rrm_beacon_req_passive_scan_vht false negative by using common finalizer
rrm_beacon_req_passive_scan_vht fails with this message:

---------------
wlan0: Country code not reset back to 00: is FI
wlan0: Country code cleared back to 00
---------------

hostap commit 91b6eba773
'Move MAC address randomization enable/disable to helper functions'.

wireless-testing commit 66c112cbd1d44d05322bb4eef908c82a68adbb5e
tag: wt-2019-06-26.

This patch fixes the issue.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-07-30 23:45:52 +03:00
Masashi Honma
8ddf0eca3d tests: Fix rrm_beacon_req_passive_scan_vht160 false negative by using common finalizer
rrm_beacon_req_passive_scan_vht160 fails with this message.

---------------
wlan0: Country code not reset back to 00: is ZA
wlan0: Country code cleared back to 00
---------------

This patch fixes the issue.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-06-26 20:42:20 +03:00
Masashi Honma
dcaf962f69 tests: Fix rrm_beacon_req_table_vht false negative by using common finalizer
rrm_beacon_req_table_vht fails with this message.

---------------
wlan0: Country code not reset back to 00: is FI
wlan0: Country code cleared back to 00
---------------

This patch fixes the issue.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-06-26 20:42:20 +03:00
Avraham Stern
986bfb6ed6 tests: Update rrm_beacon_req_last_frame_indication to match implementation
The last beacon report indication was set in all the beacon report
elements in the last frame of the beacon report, while it should be set
only in the last beacon report element of the last frame. This is now
fixed in wpa_supplicant, so update the test case expectation to match
the fixed behavior.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2019-04-13 11:56:08 +03:00
Jouni Malinen
e01a492caa tests: Helper function for DISCONNECT + ABORT_SCAN + wait
Use a helper function to perform this common sequence to disconnect and
stop any possibly started reconnection attempt.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-17 17:58:33 +02:00
Jouni Malinen
fab49f6145 tests: Python coding style cleanup (pylint3 bad-whitespace)
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-16 18:52:09 +02:00
Masashi Honma
54c58f29c0 tests: Replace str.encode('hex') with binascii.hexlify() for python3
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-04 12:26:34 +02:00
Masashi Honma
7ab74770e7 tests: Convert binascii.hexlify() output to a string object for python3
This is needed in cases the hexlify() output is used to concatenate with
a string or used in string comparisons.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-04 12:26:33 +02:00
Masashi Honma
26b0c29042 tests: Python3 does not allow mixed indentation
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 13:04:38 +02:00
Masashi Honma
bab493b904 tests: Use python3 compatible "except" statement
This patch is made by using 2to3 command.

$ find . -name *.py | xargs 2to3 -f except -w -n

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 12:11:35 +02:00
Avraham Stern
8d09cf52a5 tests: Beacon report last frame indication
Verify that the beacon report contains the last beacon report
indication subelement when requested in the beacon request.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2019-01-02 16:26:11 +02:00
Avraham Stern
ec5b899040 tests: Beacon report frame body fragmentation
Verify that when the frame body subelement causes the
measurement report element to exceed the maximum element size,
the beacon report is fragmented and the frame body fragment ID
subelement is added with the correct fragment number.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2019-01-02 16:26:11 +02:00
Jouni Malinen
aa7386e92a tests: Update rrm_beacon_req_table_rsne to expect full RSNE
Now that wpa_supplicant is sending out full RSNE instead of the
fragmented one, update this test case to match.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-02 16:26:11 +02:00
Jouni Malinen
b586054f95 tests: Work around cfg80211 reg.c intersection (country 98) issues
The Linux kernel commit 113f3aaa81bd ("cfg80211: Prevent regulatory
restore during STA disconnect in concurrent interfaces") broke the
regulatory clearing attempt in many test cases since
cfg80211_is_all_idle() is now returning false due to the AP interface
being up and that results in the Country IE -based regulatory
information not getting cleared back to defaults.

Work around this by stopping the AP interface first so that when the
station interface receives the disconnection, there are no other active
interfaces in the system. In addition, wait for REGDOM event for the
Country IE hint after association to avoid disconnection before the
regulatory events have been fully processed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-23 17:25:11 +02:00
Jouni Malinen
392aba4e87 tests: Radio measurement capability with roaming
This verifies that radio measurement capabilities are negotiated
correctly for the reassociation cases with and without FT.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-01 22:02:55 +02:00
Li Zhijian
783bf87144 tests: Fix missing function on some rrm test case error paths
Import vht_supported from test_ap_vht to fix the following issue:

rrm_beacon_req_table_vht run failed: global name 'vht_supported' is not defined

Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
2017-09-10 21:54:38 +03:00
Andrei Otcheretianski
cdb3aab569 tests: Fix RRM tests to allow refused/incapable responses
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2017-07-17 18:04:00 +03:00
Jouni Malinen
d557183150 tests: Rejection of group-addressed RRM measurement request
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-07-17 17:47:25 +03:00
Avraham Stern
ae2f1a9c0f tests: Make beacon report tests remote compatible
Use the new hostapd.add_ap() API (i.e., pass the ap device as a
parameter instead of the interface name) in beacon report tests to
make them remote compatible, and mark them appropriately.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2017-03-06 23:55:32 +02:00
Jouni Malinen
6dbfefb9b4 tests: Additional RRM testing coverage for hostapd
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-10 19:48:12 +02:00
Jouni Malinen
0d46095ec8 tests: Skip rrm_link_measurement tests if kernel support is not available
rrm_link_measurement and rrm_link_measurement_oom test cases were
causing incorrect failures when executed with a kernel version that does
not modify mac80211_hwsim to support TX power insertion. Fix this by
checking for that capability and skipping the test cases if the kernel
does not support this.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-29 01:32:25 +02:00
Jouni Malinen
eaccab264d tests: LCI report generation and os_get_reltime() failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 22:16:24 +02:00
Jouni Malinen
18d1b41b5c tests: Radio measurement request - link measurement
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 18:46:57 +02:00
Jouni Malinen
332a685a4b tests: Radio/link measurement request for non-RRM association
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 18:00:50 +02:00
Jouni Malinen
4062f697d8 tests: Radio measurement request - OOM while rejecting a request
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 17:52:51 +02:00
Jouni Malinen
4b2bc05377 tests: Fix rrm_beacon_req_passive_ap_channels to use passive scan
The request from the AP was encoded incorrectly for this test case and
an active scan was requested instead of the passive one that was
supposed to be used here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 17:47:12 +02:00
Jouni Malinen
2f7b4bb578 tests: Beacon request - active scan mode os_get_random failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 17:46:18 +02:00
Jouni Malinen
073167de7b tests: Check rrm capabilities with a helper function
And also move couple of these checks to the beginning of the test case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 13:39:49 +02:00
Jouni Malinen
317c19c5aa tests: Remove write-only bssid assignments from rrm test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 13:34:19 +02:00
Jouni Malinen
7972d88a29 tests: Beacon request - passive scan mode - VHT
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 12:50:35 +02:00
Jouni Malinen
64dbe6a78d tests: Prepare rrm_beacon_req_passive_no_match_oom for code change
Replace the TEST_ALLOC function wpas_beacon_rep_no_results with an
earlier function in the backtrace and wpabuf_resize() in preparation to
a code change that allows the compiler to optimize out
wpas_beacon_rep_no_results().

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 12:12:22 +02:00
Jouni Malinen
6c7a7c7996 tests: Beacon request - active scan mode and old scan result
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-03 19:53:03 +02:00
Jouni Malinen
28b32e66d8 tests: Beacon request - passive scan mode and no matching BSS
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-03 19:53:03 +02:00
Jouni Malinen
1edc31904a tests: Beacon request - active scan mode and many BSSs
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-03 19:53:03 +02:00
Jouni Malinen
618073aa2e tests: LCI report generation OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-03 19:53:03 +02:00
Jouni Malinen
b157f0e265 tests: wpa_supplicant and concurrent NEIGHBOR_REP_REQUEST commands
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-03 19:53:03 +02:00
Jouni Malinen
b865987571 tests: NEIGHBOR_REP_REQUEST for AP not supporting neighbor report
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-03 19:53:03 +02:00
Jouni Malinen
fc22c9cfba tests: wpa_supplicant and disconnection during NEIGHBOR_REP_REQUEST
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-03 19:53:03 +02:00
Jouni Malinen
1c2bfe9984 tests: wpa_supplicant ctrl_iface NEIGHBOR_REP_REQUEST OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-03 19:53:03 +02:00