Commit graph

89 commits

Author SHA1 Message Date
Masashi Honma
6c714cd7d4 P2P: Show "FAIL" for failed p2p_find operation
I tried these commands:

./wpa_cli -i wlan0 p2p_group_add
./wpa_cli -i wlan0 p2p_find

The second one results in following messages because it is invalid
operation.

-------
nl80211: Scan trigger failed: ret=-95 (Operation not supported)
P2P: Failed to start p2p_scan
-------

But the second one shows "OK" on control console.

This patch makes it to show "FAIL".
2011-01-31 17:29:31 +02:00
Jouni Malinen
0382097ef3 Use set_key addr to distinguish default and multicast keys
Previously, both NULL and ff:ff:ff:ff:ff:ff addr were used in various
places to indicate default/broadcast keys. Make this more consistent
and useful by defining NULL to mean default key (i.e., used both for
unicast and broadcast) and ff:ff:ff:ff:ff:ff to indicate broadcast
key (i.e., used only with broadcast).
2011-01-09 19:44:28 +02:00
Johannes Berg
0423d090ce P2P: Fix some int size warnings
When u64 != unsigned long, the compiler will give
some warnings. Fix these.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-12-17 17:09:50 +02:00
Sudhakar Swaminathan
9d562b7946 P2P: Add p2p_unauthorize command
This can be used to remove authorization from a previous p2p_connect
commands that has not yet resulted in completed GO Negotiation.
2010-11-25 13:09:50 +02:00
Jouni Malinen
b21e2c84f1 Include own MAC address in status info even in non-P2P builds 2010-11-21 12:35:49 +02:00
Jouni Malinen
70d84f11fe WPS: Add wps_ap_pin ctrl_iface command for wpa_supplicant AP mode
This can be used to control the AP PIN in wpa_supplicant AP mode
in the same way as the identical command in hostapd ctrl_iface.
2010-11-17 16:46:55 +02:00
Jouni Malinen
acec8d3203 Add ctrl_iface command 'GET version'
This can be used to fetch the wpa_supplicant/hostapd version
string.
2010-10-31 17:07:31 +02:00
Jouni Malinen
d25f7212da Fix copy-paste bug in p2p_serv_disc_resp handling
The destination address for p2p_serv_disc_resp must always be set
to an individual MAC address unlike p2p_serv_disc_req which may use
00:00:00:00:00:00 to indicate wildcard query. As such, we should not
try to check for this special case here.
2010-10-31 12:17:30 +02:00
Jouni Malinen
ed159ad41b WPS ER: Add more details to wps_er_pbc failure returns
Indicate the reason for the failure when wps_er_pbc is rejected.
2010-10-25 21:59:25 +03:00
Jouni Malinen
129eb428b1 WPS: Fix wps_reg command documentation to require BSSID
Replacing the BSSID with 'any' has never worked with wps_reg
command, so better not claim it could work. In addition, reject
this is wpa_supplicant to make it clearer that the operation
fails.
2010-10-25 18:56:49 +03:00
Jouni Malinen
ef10f4733f WPS ER: Add wps_er_set_config to use local configuration
This command can be used to enroll a network based on a local
network configuration block instead of having to (re-)learn the
current AP settings with wps_er_learn.
2010-10-20 13:37:01 +03:00
Jouni Malinen
59eba7a2b3 P2P: Add p2p_cancel command for cancelling ongoing group formation 2010-10-19 15:53:28 +03:00
Jouni Malinen
d054a4622c P2P: Reject multi-channel concurrent operations depending on driver
The driver wrapper can now indicate whether the driver supports
concurrent operations on multiple channels (e.g., infra STA connection
on 5 GHz channel 36 and P2P group on 2.4 GHz channel 1). If not,
P2P_CONNECT commands will be rejected if they would require
multi-channel concurrency.

The new failure codes for P2P_CONNECT:

FAIL-CHANNEL-UNAVAILABLE:
The requested/needed channel is not currently available (i.e., user has
an option of disconnecting another interface to make the channel
available).

FAIL-CHANNEL-UNSUPPORTED:
The request channel is not available for P2P.
2010-10-14 14:24:56 +03:00
Jouni Malinen
235f69fcd6 Mark ctrl_iface RX debug for PING commands excessive
This cleans up debug log from unnecessary entries when using
wpa_cli/hostapd_cli or other ctrl_iface monitors that PING
periodically to check connectivity.
2010-09-24 15:50:13 -07:00
Jouni Malinen
3981cb3cb8 WPS: Add wps_check_pin command for processing PIN from user input
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
2010-09-23 10:30:52 -07:00
Jouni Malinen
b4e34f2fdf WPS: Make testing operations configurable at runtime
Instead of build time options (CONFIG_WPS_TESTING_EXTRA_CRED and
CONFIG_WPS_EXTENSIBILITY_TESTING), use a single build option
(CONFIG_WPS_TESTING) and runtime configuration of which testing
operations are enabled. This allows a single binary to be used
for various tests.

The runtime configuration can be done through control interface
with wpa_cli/hostapd_cli commands:
Enable extensibility tests:
set wps_version_number 0x57
Disable extensibility tests (WPS2 build):
set wps_version_number 0x20
Enable extra credential tests:
set wps_testing_dummy_cred 1
Disable extra credential tests:
set wps_testing_dummy_cred 0
2010-09-21 19:51:23 -07:00
Ardong Chen
0d0a8ca1cc Add option for disabling automatic reconnection on disconnection
ctrl_interface STA_AUTOCONNECT command can now be used to disable
automatic reconnection on receiving disconnection event. The default
behavior is for wpa_supplicant to try to reconnect automatically, i.e.,
to maintain previous behavior.
2010-09-10 10:30:26 -07:00
Ardong Chen
2f9929ffcc WPS: Allow pending WPS operation to be cancelled
A new ctrl_interface command, WPS_CANCEL, can now be used to cancel
a pending or ongoing WPS operation. For now, this is only available
with wpa_supplicant (either in station or AP mode). Similar
functionality should be added for hostapd, too.
2010-09-10 10:30:25 -07:00
Jouni Malinen
b6c79a998f Add test command for disabling/enabling A-MPDU aggregation
ctrl_iface command "SET ampdu <0/1>" can now be used to
disable/enable A-MPDU aggregation.
2010-09-09 07:17:21 -07:00
Jouni Malinen
eea2fd9eff P2P: Add mechanism for configuring UAPSD parameters for group
This is needed to be able to change parameters for dynamically
created interfaces between the creation of the interface and
association/start AP commands.

Following ctrl_interface commands can now be used:

P2P_SET client_apsd disable
- disable configuration (i.e., use driver default) in client mode

P2P_SET client_apsd <BE>,<BK>,<VI>,<VO>;<max SP Length>
- enable UASPD with specific trigger configuration (0/1) per AC
  (max SP Length is currently ignored)

P2P_SET go_apsd disable
- disable configuration (i.e., use driver default) in AP mode

P2P_SET go_apsd <0/1>
- disable/enable APSD in AP mode
2010-09-09 07:17:21 -07:00
Jouni Malinen
72044390f3 P2P: Add support for cross connection
If enabled, cross connection allows GO to forward IPv4 packets
using masquerading NAT from the P2P clients in the group to an
uplink WLAN connection. This is disabled by default and can be
enabled with "wpa_cli p2p_set cross_connect 1" on the P2P device
interface.
2010-09-09 07:17:20 -07:00
Jouni Malinen
aefb53bd5d P2P: Disable periodic NoA when non-P2P STA is connected
For now, this applies to the test command that can be used to set
periodic NoA (p2p_set noa). The value are stored and periodic NoA
is enabled whenever there are no non-P2P STAs connected to the GO.
2010-09-09 07:17:20 -07:00
Jouni Malinen
6d4747a9a2 Add P2P Interface Address into ctrl_iface status output 2010-09-09 07:17:19 -07:00
Jouni Malinen
80c9582a5f P2P: Add test command for filtering which peers are discovered
"wpa_cli p2p_set peer_filter <MAC address>" can now be used to
only allow a single P2P Device (based on P2P Device Address) to be
discovered for testing. Setting the address to 00:00:00:00:00:00
disables the filter.
2010-09-09 07:17:19 -07:00
Jouni Malinen
6e6963ea86 P2P: Add test mode for SD to force fragmented response 2010-09-09 07:17:19 -07:00
Jouni Malinen
108def931e P2P: Add command for pre-authorizing an invitation to an active group
This is mainly designed for testing and allows p2p_connect join auth
to be used to accept a specific invitation to an active group that
may be received in the future.
2010-09-09 07:17:19 -07:00
Jouni Malinen
3c5126a41f P2P: Set Device Password ID in WPS M1/M2 per new rules
If the P2P client (WPS Enrollee) uses a PIN from the GO (Registrar),
Device Password ID in M1 & M2 is set to Registrar-specified.
2010-09-09 07:17:19 -07:00
Jouni Malinen
c381508d88 P2P: Implement power save configuration
wpa_cli p2p_set ps <0/1/2>
wpa_cli p2p_set oppps <0/1>
wpa_cli p2p_set ctwindow <0..> msec
2010-09-09 07:17:19 -07:00
Jouni Malinen
0c6b310e83 P2P: Show P2P info in ctrl_iface scan results 2010-09-09 07:17:18 -07:00
Jouni Malinen
d23bd8940f P2P: Show P2P Device Address in wpa_cli status 2010-09-09 07:17:18 -07:00
Jouni Malinen
b563b3882e P2P: Add control interface commands for P2P 2010-09-09 07:17:18 -07:00
Jouni Malinen
4dac02455a P2P: Use config block with disabled==2 to store persistent groups 2010-09-09 07:17:17 -07:00
Jouni Malinen
9fa243b295 P2P: Let WPS code know if it is used in a P2P group 2010-09-09 07:17:16 -07:00
Jouni Malinen
2c5d725c65 P2P: Add dynamic network config block parameters for P2P 2010-09-09 07:17:16 -07:00
Jouni Malinen
611aea7d41 Allow ctrl_iface SET command to change global config parameters 2010-09-09 07:17:16 -07:00
Jouni Malinen
42f50264c0 WPS: Make fragment size configurable for EAP-WSC peer
"wpa_cli set wps_fragment_size <val>" can now be used to configure the
fragment size limit for EAP-WSC.
2010-09-09 06:07:49 -07:00
Jouni Malinen
53587ec183 WPS 2.0: Make WSC 2.0 support to be build option (CONFIG_WPS2)
For now, the default build will only include WSC 1.0 support.
CONFIG_WPS2=y can be used to add support for WSC 2.0.
2010-09-09 06:07:48 -07:00
Jouni Malinen
31fcea931d WPS 2.0: Add support for AuthorizedMACs attribute
Advertize list of authorized enrollee MAC addresses in Beacon and
Probe Response frames and use these when selecting the AP. In order
to provide the list, the enrollee MAC address should be specified
whenever adding a new PIN. In addition, add UUID-R into
SetSelectedRegistrar action to make it potentially easier for an AP
to figure out which ER sent the action should there be multiple ERs
using the same IP address.
2010-09-09 06:07:47 -07:00
Jouni Malinen
77895cd937 Add a mechanism to insert notes to wpa_supplicant debug log
This can be used to insert information from external programs to the
wpa_supplicant debug log.
2010-08-11 18:07:22 +03:00
Jouni Malinen
7d6640a62c WPS ER: Add command for configuring an AP
wps_er_config can now be used to configure an AP. It is similar to
wps_er_learn, but instead of only learning the current AP settings,
it continues to send M8 with the new settings for the AP.
2010-05-28 00:01:48 +03:00
Jouni Malinen
0848668513 WPS ER: Allow AP filtering based on IP address
wps_er_start command now takes an optional parameter that can be used
to configure a filter to only allow UPnP SSDP messages from the
specified IP address. In practice, this limits the WPS ER operations
to a single AP and filters out all other devices in the network.
2010-05-27 15:23:55 +03:00
Jouni Malinen
8401a6b028 Add Linux rfkill support
Add a new wpa_supplicant state: interface disabled. This can be used
to allow wpa_supplicant to be running with the network interface even
when the driver does not actually allow any radio operations (e.g.,
due to rfkill).

Allow driver_nl80211.c and driver_wext.c to start while rfkill is in
blocked state (i.e., when ifconfig up fails) and process rfkill
events to block/unblock WLAN.
2010-05-23 10:27:32 +03:00
Jouni Malinen
5fbc1f279b Fix get_interfaces() driver call to use correct drv_priv data 2010-04-14 16:38:53 +03:00
Jouni Malinen
cf4783e35f Deauthenticate instead of disassociate on disconnect command
This clears up authentication state in the driver and in case of
cfg80211, unlocks the BSS entry for the previously used AP.
2010-04-11 19:27:41 +03:00
Jouni Malinen
86d4f806da Add ctrl_iface command for triggering a roam to a specific BSS
'wpa_cli roam <bssid>' can now be used to test roaming within an ESS
(e.g., for FT over-the-air). This command will bypass a new scan and
will select the BSS based on the specified BSSID. It is responsibility
of the caller to make sure that the target AP is in the BSS table.
This can be done, e.g., by running a scan before the roam command,
if needed.
2010-04-10 22:56:55 +03:00
Jouni Malinen
a7b6c42232 Fix error messages to print ASCII MAC address, not the parse buffer 2010-04-10 22:46:54 +03:00
Jouni Malinen
76b7981d07 FT: Copy FT Capability and Policy to MDIE from target AP
This sets the FT Capability and Policy field in the MDIE to the values
received from the target AP (if available). This fixes the MDIE contents
during FT Protocol, but the correct value may not yet be used in initial
mobility domain association.
2010-04-09 16:26:20 +03:00
Jouni Malinen
32d5295f9d Add a drop_sa command to allow 802.11w testing
This drops PTK and PMK without notifying the AP.
2010-03-29 15:42:04 -07:00
Dmitry Shmidt
aa53509ffe Update priority list after priority change
Despite comments in the wpa_config_update_prio_list(struct wpa_config
*config) telling that it is called "if priority for a network is
changed", it is apparently not.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2010-03-06 11:13:50 +02:00
Jouni Malinen
207ef3fb12 Add suspend/resume notifications
wpa_supplicant can now be notified of suspend/resume events, e.g.,
from pm-action scripts. This allows wpa_supplicant to clear information
that may become invalid during a suspend operation.
2010-02-27 18:46:02 +02:00