Commit graph

46 commits

Author SHA1 Message Date
Jouni Malinen
b350009f8c tests: Optimize start.sh execution time
There is no need to wait for one extra second to chown log files when
running as root which is always the case in VM execution.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 19:22:42 +02:00
Jouni Malinen
e9026725f7 tests: Extra coverage for command line arguments
The results for these are not currently verified, but this allows
--codecov runs to get more coverage for the command line argument
parsers.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 12:24:15 +02:00
Johannes Berg
1e3c7e82b5 tests: Disable support_p2p_device by default
When loading the hwsim module, disable support_p2p_device by default.
This will also become the default in the kernel, but until then it
makes sure it's not turned on by default.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-22 10:53:52 +03:00
Haim Dreyfuss
57d909eeff tests: Add channels argument to run-all.sh and start.sh
Add an option to run-all.sh and start.sh to get as an argument the
number of concurrent channels that mac80211_hwsim will be loaded with.
To start mac80211_hwsim with more than one channel, the following
parameter should be added to command line: channels=<num_channels>
The default is one channel (no concurrent channels).
The driver should be loaded with multi channel support in order to run
some tests.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
2014-06-14 19:47:51 +03:00
Jouni Malinen
a7fb2f2f4f tests: Run hostapd-AS under valgrind if requested
Previously, only hostapd-AP and wpa_supplicant processed were run under
valgrind when valgrind testing was enabled. Extend this to include
hostapd as authentication server.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-06-02 16:20:08 +03:00
Jouni Malinen
5b1aaf6cfb tests: EAP-SIM/AKA/AKA' with SQLite
Extend EAP-SIM/AKA/AKA' test coverage by setting up another
authentication server instance to store dynamic SIM/AKA/AKA' information
into an SQLite database. This allows the stored reauth/pseudonym data to
be modified on the server side and by doing so, allows testing fallback
from reauth to pseudonym/permanent identity.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-11 17:57:28 +03:00
Jouni Malinen
1d6f579ada tests: Update hlr_auc_gw Milenage file
This increases hlr_auc_gw.c test coverage and allows the SQN updated to
be checked if desired.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-30 17:06:34 +03:00
Jouni Malinen
a0f350fd79 tests: EAP-SIM server using GSM triplets
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-30 16:28:48 +03:00
Eduardo Abinader
3bdc651a62 tests: Fix current log dir symbolic link
Fix updating of the current symbolic link when LOGDIR is already set.
The current symbolic link was only set, if LOGDIR has not been
previously defined. If the user had chosen to cancel the running test
iteration and run it again by running start.sh again, the current
symbolic link was not updated.

Signed-off-by: Eduardo Abinader <eduardo.abinader@openbossa.org>
2014-03-06 00:04:34 +02:00
Jouni Malinen
4fcee244b9 tests: Verify RADIUS server MIB values
Enable hostapd control interface for the RADIUS server instance and
verify that the RADIUS server MIB counters are incremented.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 21:39:31 +02:00
Jouni Malinen
1cfb58d400 tests: Build hlr_auc_gw separately for code coverage analysis
This improves accuracy of the code coverage reports with hostapd-as-AS
and hlr_auc_gw getting analyzed separately.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 17:08:38 +02:00
Jouni Malinen
9489637b42 tests: Verify dynamic wpa_supplicant interface addition/removal
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 15:45:18 +02:00
Jouni Malinen
3f33b3ad8c tests: Collect code coverage separately from each component in vm
Use a more robust design for collecting the gcov logs from the case
where test cases are run within a virtual machine. This generates a
writable-from-vm build tree for each component separately so that the
lcov and gcov can easily find the matching source code and data files.
In addition, prepare the reports automatically at the end of the
vm-run.sh --codecov execution.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-27 18:11:07 +02:00
Jouni Malinen
50acc38469 tests: Remove special start.sh option for concurrent P2P tests
These were not really used in practice and better quality test cases for
concurrent P2P operations are now available in tests_p2p_concurrency.py
using the standard test framework design. Remove the special concurrent
option for start.sh and the run-all.sh concurrent and
concurrent-valgrind operations to clean up scripts.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 21:20:15 +02:00
Jouni Malinen
848bb8dea9 tests: Use per-test case log/capture file from wlantest
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 21:47:06 +02:00
Jouni Malinen
b4b89ae3aa tests: Remove duplicated mkdir for LOGDIR
LOGDIR directory is created automatically if LOGDIR variable was not
set. If the variable is set, that directory is expected to exist.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-09 15:34:29 +02:00
Michal Kazior
d65a593b1e tests: Use proper admin group in start.sh
wpa_supplicant configuration files had a hardcoded GROUP=admin. The
start.sh script failed on a system without admin group (some systems
have it named adm).

Generate configuration files with appropriate GROUP in the log dir
and use them.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-11-09 15:31:35 +02:00
Jouni Malinen
f01edbcfac tests: Rename stop-wifi.sh to stop.sh
This makes script naming more consistent with start.sh.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-02 15:39:25 +02:00
Jouni Malinen
75428961d9 tests: Split hostapd debug log into per test case files
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-02 11:53:38 +02:00
Jouni Malinen
b72c300267 tests: Use a symlink for default LOGDIR between scripts
This allows run-tests.py to use the same logs/<date> default logdir as
start.sh which is quite convenient for manual test runs.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 14:27:57 +02:00
Jouni Malinen
353e5067ff tests: Split wpa_supplicant debug logs into per test case files
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 13:19:38 +02:00
Jouni Malinen
d05159ccc5 tests: Replace tcpdump with wlantest file write
There is no need to run a separate tcpdump process to capture frames
from hwsim0 since wlantest is already doing that can write the results
to a file.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 11:35:02 +02:00
Johannes Berg
e8e238c436 hwsim tests: Silence chown warnings
If running in a VM with the logs going to a host filesystem
chown isn't actually possible, silence any warnings from it.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-10-31 11:08:16 +02:00
Johannes Berg
044dd1c267 hwsim tests: Silence modprobe warnings
If module loading isn't enabled (e.g., in VM tests) then
don't try to load/unload the modules.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-10-31 11:08:16 +02:00
Johannes Berg
958bf1ba39 hwsim tests: Move logging into timestamped subdirectory
Instead of logging many files called "<timestamp>-*", log into
a new "<timestamp>/*" in the logs/ subdirectory and only put
the last-debug file into logs/. If a LOGDIR is specified in the
environment, instead just put everything into that directory
(so the caller should make sure to give it a timestamp or so)
and skip the creation of last-debug entirely.

Also clean up a bit and pass the LOGDIR from run-all.sh to
start.sh rather than having start.sh create the timestamp and
run-all.sh detect the latest one when having run start.sh.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-10-31 11:07:26 +02:00
Johannes Berg
0648c3b8f5 hostapd: Add -T Linux tracing option
Just like wpa_supplicant, give hostapd the -T option to
send all debug messages into the Linux tracing buffer.
Enable this option for hwsim test builds by default.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-10-31 10:47:44 +02:00
Johannes Berg
aee9446d0c hwsim tests: Pass commit as an argument
Rather than saving the current commit to a file, pass it
as an argument to run-tests.py.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-10-31 10:29:00 +02:00
Jouni Malinen
3b464a3c21 tests: Silence chmod errors
These will fail if used on a readonly file system and are only needed
for valgrind runs.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-30 19:58:23 +02:00
Johannes Berg
95194219df tests: Reduce duplication in startup code
Instead of hard-coding four different cases, use variables
(and printf) to reduce the duplication.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-10-30 19:58:23 +02:00
Johannes Berg
5fecc0f525 tests: Allow specifying LOGDIR for hwsim scripts
Instead of hardcoding logs/, allow putting LOGDIR into
the environment. This helps run tests in a VM where the
rootfs might be mounted read-only.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-10-30 15:55:58 +02:00
Jouni Malinen
b74b7e87bb tests: Add support for sqlite results database
This is more convenient to use directly than going through the
text-based results file.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-27 10:04:47 +02:00
Jouni Malinen
479cbb3892 tests: Start RADIUS authentication server
This can be used to run WPA2-Enterprise test cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 19:14:16 +03:00
Jouni Malinen
997ebcfa5c tests: Auto detect group name
Some older systems used admin group, but adm group seems to be more
common nowadays, so detect this automatically rather than assume admin
group is used.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 16:41:17 +03:00
Jouni Malinen
66767f0f4a tests: Merge start-p2p-concurrent.sh functionality into start.sh
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 16:37:25 +03:00
Jouni Malinen
8d0825d655 tests: Exit early if startup fails
There is no point trying to go through the tests if hostapd and
wpa_supplicant processes cannot be started properly.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-28 18:19:38 +03:00
Jouni Malinen
53b63a0a3f tests: Add support for using Linux kernel tracing functionality
run-all.sh and start.sh scripts can now take 'trace' command line
argument to request Linux tracing information from mac80211, cfg80211,
and wpa_supplicant to be recorded.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-28 11:06:46 +03:00
Jouni Malinen
b76579e0c0 tests: Wait for hostapd/wpa_supplicant to reply at start
Instead of waiting for a fixed duration, poll hostapd/wpa_supplicant
through the control interface until they are ready to reply in order to
avoid starting test case execution too early.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-26 16:47:15 +03:00
Jouni Malinen
be1a40f26f tests: Redirect tcpdump output to a file
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-25 21:43:21 +03:00
Jouni Malinen
f84692764a tests: Sleep even longer before starting valgrind tests
It looks like some virtual host setups are too slow to get
wpa_supplicant initialized under valgrind and this was triggering test
failures. Work around this by using even a longer wait before test case
execution.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-24 23:47:40 +03:00
Jouni Malinen
d011246f79 tests: Make wpa_supplicant and hostapd executable through valgrind
It looks like valgrind could not under buildbot with the default file
mode. Fix this by making wpa_supplicant and hostapd binaries readable
and executable by everyone.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-24 21:46:44 +03:00
Jouni Malinen
0c43a982c7 tests: Add option to run test cases under valgrind/concurrent P2P
./run-all.sh can now take an optional argument to select whether to run
all test cases as before (default), to run these under valgrind
("valgrind"), to run P2P test cases with concurrent station interface
("concurrent"), or the concurrent P2P test cases under valgrind
("concurrent-valgrind").

valgrind cases report errors if a test case fails or valgrind reports an
error.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-24 20:33:21 +03:00
Jouni Malinen
0fa28afe35 tests: Use wpa_supplicant global control interface for P2P
This allows more consistent interface to be used regardless of which
P2P driver design is used (especially for P2P management operations
over netdev vs. dedicated P2P_DEVICE).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-01 00:36:33 +03:00
Jouni Malinen
441d6d23b2 tests: Initialize global wpa_supplicant control interface
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-06-30 20:21:07 +03:00
Jouni Malinen
8c87f65f32 tests: Use /var/run/hostapd-global to avoid socket file in work dir
This makes some cases more convenient with read-only file systems.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-10 17:09:55 +03:00
Jouni Malinen
79c3cbaf12 tests: Capture hwsim0 packet dump during test run
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-26 12:36:56 +03:00
Jouni Malinen
63a020ead8 tests: Use a single set of scripts for running both P2P and AP tests
This removes the unnecessary separation of P2P (no hostapd) and AP
tests. The same scripts can be used to prepare for these tests and to
execute the tests.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:31 +03:00
Renamed from tests/hwsim/start-ap.sh (Browse further)