Commit graph

6220 commits

Author SHA1 Message Date
Jouni Malinen
66a6331501 tests: Increase P2P SD test coverage
Verify cases both with multiple peers (one of which not advertising any
services) and with multiple SD queries.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-20 16:32:26 +02:00
Jithu Jance
f667e031c9 P2P: Address few issues seen with P2P SD
Suppose we have multiple peers and we have peers advertising SD
capability, but no services registered for advertising. In this case,
even if there are multiple broadcast queries set, we might end up
sending only the lastly added broadcast query to the same device (since
SD_INFO won't get set for the first broadcast query). Add support for
multiple wildcard queries to be tracked to enable this type of use
case.

Some times it is seen that before advancing to next device in the list,
the scan results come and update SD_SCHEDULE flag. This will result in
sending the already sent query to the same device without giving chance
to other devices. This issue again is seen with peer devices advertising
SD capability without any services registered.

Signed-off-by: Jithu Jance <jithu@broadcom.com>
2014-02-20 16:32:12 +02:00
Dmitry Shmidt
e9a6f18385 TLS: Add tls_disable_tlsv1_1 and tls_disable_tlsv1_2 phase1 params
These can be used to disable TLSv1.1 and TLSv1.2 as a workaround for AAA
servers that have issues interoperating with newer TLS versions.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-02-20 15:28:57 +02:00
Jouni Malinen
41ff0fa64c tests: Verify NAS identification attributes in Disconnect-Request
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-20 13:56:27 +02:00
Jouni Malinen
cb10c7d12d RADIUS DAS: Add support for NAS identification attributes
This allows NAS-IP-Address, NAS-Identifier, and NAS-IPv6-Address to be
included in the Disconnect-Request packets.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-20 13:55:36 +02:00
Jouni Malinen
e58f59cb58 tests: Verify that Disconnect-Request prevents PMKSA caching
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-20 13:27:16 +02:00
Jouni Malinen
0d7c5e1dfc RADIUS DAS: Remove PMKSA entry on Disconnect-Request
When a station is disconnected based on Disconnect-Request, it is better
to force the station to go through full EAP authentication if it tries
to reconnect.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-20 13:26:22 +02:00
Jouni Malinen
d87a6acdf5 WPS: Fix STA state validation when processing PutWLANResponse
It is possible for an ER to send an unexpected PutWLANResponse action
when the destination STA is in disassociated, but not fully
deauthenticated state. sta->eapol_sm can be NULL in such state and as
such, it would be possible to hit a NULL pointer dereference in the
eapol_auth_eap_pending_cb() call at the end of the
hostapd_wps_probe_req_rx() when trying to proxy the WPS message to the
station. Fix this by validating that sta->eapol_sm is set before
processing the message.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-19 23:51:55 +02:00
Dmitry Shmidt
ac494fcce4 Android: Use external libnl 2.0 dynamic library
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-02-19 14:10:12 +02:00
Roger Zanoni
b7cac41254 Fix hostapd and wpa_supplicant build with binutils >= 2.24.x
Using binutils >= 2.24.x and setting
CONFIG_WPA_TRACE/CONFIG_WPA_TRACE_BDF causes both builds to fail with
"#error config.h must be included before this header" message.

Since version 2.24.x, the bfd header checks for PACKAGE and
PACKAGE_VERSION macros.

As suggested in http://sourceware.org/bugzilla/show_bug.cgi?id=14243
projects that use bfd and don't use autotools should define a PACKAGE
macro.

Signed-off-by: Roger Zanoni <roger.zanoni@openbossa.org>
2014-02-19 14:10:12 +02:00
Jouni Malinen
b62d5b5450 Revert "OpenSSL: Do not accept SSL Client certificate for server"
This reverts commit 51e3eafb68. There are
too many deployed AAA servers that include both id-kp-clientAuth and
id-kp-serverAuth EKUs for this change to be acceptable as a generic rule
for AAA authentication server validation. OpenSSL enforces the policy of
not connecting if only id-kp-clientAuth is included. If a valid EKU is
listed with it, the connection needs to be accepted.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-19 13:22:49 +02:00
Jouni Malinen
94a3df500f P2P: Enable U-APSD support on GO automatically
Since P2P specification mandates P2P GO to support WMM-PS with legacy
STAs, enable this automatically if the driver indicates support for
U-APSD in AP mode. The "P2P_SET go_apsd 0" command can still be used to
disable this if needed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-17 13:15:29 +02:00
Jouni Malinen
a5527a49e8 P2P: Add more debug prints for Probe Request processing
It can be helpful to see from the debug log why the P2P Device role did
not reply to a Probe Request frame.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-17 11:43:53 +02:00
Jouni Malinen
da63ee073f tests: Add more time for P2P discovery tests
It looks like some of the discovery_* test cases have been failing every
now and then on the virtual server and the one second timeout could have
been a bit too short to cover some possible timing cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-17 11:42:43 +02:00
Andrei Otcheretianski
b3253ebb73 wpa_supplicant: Complete radio works on disable event
While testing rfkill blocking of a scanning interface, it
was seen that the ongoing scan never completes. This happens
since EVENT_SCAN_RESULTS is discarded on a disabled interface.

Fix this and also other possible radio work completion issues
by removing all the radio works (including started) of the
disabled interface.

To be able to remove already started radio works, make their
callbacks be reentrant with deinit flag (when the work
is started), so each radio work should be able to handle
its own termination.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2014-02-16 00:06:23 +02:00
Jouni Malinen
55497a51a8 tests: Verify CoA-Request behavior
This version verifies that hostapd NAKs a valid request since
CoA-Request is not yet supported.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 22:03:06 +02:00
Jouni Malinen
6f939e591e tests: Convert connect() to use kwargs
This makes it more convenient to add new network block parameters.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 21:58:09 +02:00
Jouni Malinen
a3b2bdaf24 tests: Verify RADIUS Disconnect-Request behavior
This uses pyrad to build and send various Disconnect-Request packets to
hostapd.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 21:58:08 +02:00
Jouni Malinen
38ecb06e16 Convert RADIUS debug dumps to use wpa_printf()
This allows the debug dumps of RADIUS messages to be captured through
normal wpa_printf() mechanisms.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 21:39:31 +02:00
Jouni Malinen
a0ac572611 EAP-SIM DB: Remove client socket file on connect() error
If the connection from hostapd authentication server to hlr_auc_gw fails
due to hlr_auc_gw not running yet, the local socket file was left
behind. Delete the socket file on connect() failure path.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 21:39:31 +02:00
Jouni Malinen
4fcee244b9 tests: Verify RADIUS server MIB values
Enable hostapd control interface for the RADIUS server instance and
verify that the RADIUS server MIB counters are incremented.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 21:39:31 +02:00
Jouni Malinen
4287bb76bf tests: Verify RADIUS accounting functionality
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 17:08:38 +02:00
Jouni Malinen
1cfb58d400 tests: Build hlr_auc_gw separately for code coverage analysis
This improves accuracy of the code coverage reports with hostapd-as-AS
and hlr_auc_gw getting analyzed separately.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 17:08:38 +02:00
Jouni Malinen
a1dd890a85 RADIUS: Add minimal accounting server support
This can be used to test RADIUS Accounting in hostapd.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 16:26:48 +02:00
Jouni Malinen
eac674402f tests: Verify NtPasswordHash with different UTF-8 cases
This adds a password that uses one, two, and three octet encoding
for UTF-8 characters. The value is tested against a pre-configured
hash to verify that utf8_to_ucs2() function works correctly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 12:08:50 +02:00
Jouni Malinen
22dd2d7a98 Fix MSCHAP UTF-8 to UCS-2 conversion for three-byte encoding
This fixes issues in using a password that includes a UTF-8 character
with three-byte encoding with EAP methods that use NtPasswordHash
(anything using MSCHAPv2 or LEAP).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 12:06:35 +02:00
Jouni Malinen
9aab81145a Fix nt_password_hash build
This needs librt on some systems for clock_gettime().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 11:49:40 +02:00
Jouni Malinen
a9b08adacf Remove unused crypto_bignum_rshift()
Commit bf4f5d6570 removed the only user of
this function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 11:31:20 +02:00
Jouni Malinen
2dff9e87b9 Remove unused NFC_RX_HANDOVER_REQ
The more generic NFC_REPORT_HANDOVER is now used to report completed NFC
connection handover operations in either role and NFC_RX_HANDOVER_REQ
did not have any implementation within wpa_supplicant.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 11:22:26 +02:00
Jouni Malinen
242219c563 tests: Set dh_file on EAP client
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 10:42:56 +02:00
Jouni Malinen
6ab4a7aa5a tests: EAP-TTLS and server certificate with client EKU
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 10:33:55 +02:00
Jouni Malinen
6a4d0dbe1c tests: Expired server certificate
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 10:28:22 +02:00
Jouni Malinen
64e05f9644 tests: Domain name suffix match against CN
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 10:19:16 +02:00
Ilan Peer
be24917df6 nl80211: Use nl80211_set_iface_id() to get hw features data
Use nl80211_set_iface_id() in wpa_driver_nl80211_get_hw_feature_data(),
as otherwise the function fails for a P2P Device interface (which does
not have a netdev associated with it).

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2014-02-14 19:30:27 +02:00
Marek Kwaczynski
8a45811638 hostapd: Add Operating Mode Notification support
Handle Operating Mode Notification received in (Re)Association Request
frames.

Signed-hostap: Marek Kwaczynski <marek.kwaczynski@tieto.com>
2014-02-14 19:30:05 +02:00
Helmut Schaa
d9dd86be1d hostapd: Enable IEEE 802.11w in defconfig
IEEE 802.11w is ratified since 2009 already, so this comment does not
seem to be valid anymore.

Signed-hostap: Helmut Schaa <helmut.schaa@googlemail.com>
2014-02-14 19:21:42 +02:00
Jouni Malinen
7ae7a84eef NFC: Workaround nfcpy message debug exception
The current nfcpy version does not support new WSC connection handover
message format and the handover server fails to process the request due
to a debug print. As a temporary workaround, override
HandoverServer::_process_request() with a version that avoids pretty()
print of the handover messages. This can be removed once nfcpy has been
updated to support the new format.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-13 16:37:43 +02:00
Eytan Lifshitz
6ceb95c950 Avoid NULL dereference in ieee802_1x_get_mib_sta() printf
In function ieee802_1x_get_mib_sta(), eap_server_get_name() may return
NULL, and it could be dereferenced immidiately by os_snprintf() (if the
snprintf implementation does not handle NULL pointer).

Signed-hostap: Eytan Lifshitz <eytan.lifshitz@intel.com>
2014-02-13 15:58:21 +02:00
Eytan Lifshitz
97efe70b60 wpa_supplicant: Fix NULL dereference in tls_verify_cb()
In function tls_verify_cb(), X509_STORE_CTX_get_current_cert() may
return NULL, and it will be dereferenced by X509_get_subject_name().

Signed-hostap: Eytan Lifshitz <eytan.lifshitz@intel.com>
2014-02-13 15:58:21 +02:00
Eytan Lifshitz
c0c11afaf1 wpa_supplicant: Fix NULL dereference in eap_fast_parse_end()
In eap_fast_parse_end(), pos might be NULL if the line doesn't
contain '='.

Signed-hostap: Eytan Lifshitz <eytan.lifshitz@intel.com>
2014-02-13 15:58:21 +02:00
Eytan Lifshitz
93a1caece0 Remove unnecessary NULL check
In send_assoc_resp(), sta was checked for NULL, although it can't be
NULL.

Signed-hostap: Eytan Lifshitz <eytan.lifshitz@intel.com>
2014-02-13 15:58:17 +02:00
Eytan Lifshitz
1e2ffc608b Fix theoretical NULL dereference in debug printf
In hostapd_logger_cb(), module_str is checked for NULL (on a path that
does not get executed in practice), and then possibly dereferenced in
snprintf() anyway.

Signed-hostap: Eytan Lifshitz <eytan.lifshitz@intel.com>
2014-02-13 15:58:15 +02:00
Max Stepanov
cbf21c7cb5 P2P: Avoid compiler warning in p2p_supplicant.c
Initialize flag variable explicitly to avoid [-Wmaybeuninitialized]
compiler warning in wpas_p2p_verify_channel().

Signed-hostap: Max Stepanov <Max.Stepanov@intel.com>
2014-02-13 15:46:37 +02:00
Max Stepanov
5479ff906c DFS: Avoid compiler warnings in src/ap/dfs.c
Initialize variables explicitly to avoid [-Wmaybeuninitialized] compiler
warning in hostapd_handle_dfs() and
hostapd_dfs_start_channel_switch_cac() functions.

Signed-hostap: Max Stepanov <Max.Stepanov@intel.com>
2014-02-13 15:44:37 +02:00
Eytan Lifshitz
5e6aa04b09 wpa_supplicant: Fix memory leak in wfd_subelems error path
Memory allocated by calling function ieee802_11_vendor_ie_concat()
was not freed on an error path int ctrl_iface BSS command.

Signed-hostap: Eytan Lifshitz <eytan.lifshitz@intel.com>
2014-02-13 15:41:15 +02:00
Jouni Malinen
88853aedf6 Fix CONFIG_WPS_NFC=y build without CONFIG_P2P=y
Some of the control interface operations for P2P were not properly
protected with #ifdef CONFIG_P2P.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-13 15:29:09 +02:00
Dmitry Shmidt
7ac7fd43aa Add bssid/freq hint for driver-based BSS selection
This uses the new nl80211 attributes to allow the connect command to
provide bssid and freq hints to the driver without limiting roaming to
the specific BSS/frequency. This can be used by drivers that perform
internal BSS selection (WPA_DRIVER_FLAGS_BSS_SELECTION) as a candidate
for initial association.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-02-13 15:14:18 +02:00
Jouni Malinen
92484e2d79 Start using unodified Developer Certificate of Origin v1.1
With the license terms having been cleaned up in the hostap.git files,
there is no continued need for the additional (e) item to explicitly
acknowledge BSD license option for contributions. Since DCO v1.1 is now
available from http://developercertificate.org/ it looks reasonable to
move to the unmodified version of DCO and to the commonly used
Signed-off-by tag for this project.

Signed-hostap: Jouni Malinen <j@w1.fi>
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-13 14:56:42 +02:00
Jouni Malinen
56ec49c540 Sync with wireless-testing.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2014-02-12.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-13 14:35:01 +02:00
Jouni Malinen
b64afe22aa Fix SAE state validation on AP
Confirm-before-commit validation step allowed execution to continue on
error case. This could result in segfault in sae_check_confirm() if the
temporary SAE data was not available (as it would not be, e.g., in case
of an extra SAE confirm message being received after successful
exchange). Fix this by stopping SAE processing immediately after
detecting unexpected state for confirm message. In addition, make the
public sae.c functions verify sae->tmp before dereferencing it to make
this type of bugs less likely to result in critical issues.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-12 17:46:33 +02:00