Commit graph

1449 commits

Author SHA1 Message Date
Jouni Malinen
7c6f1c5e4a Remove obsolete defconfig notes regarding EAP-FAST support in OpenSSL
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-07-09 16:43:36 +03:00
Jouni Malinen
abe025dd31 tests: Shorter TX/RX test frame support for hostapd
wpa_supplicant already included support for this, but hostapd
DATA_TEST_* commands did not yet have support for using a shorter test
frame. This is needed for MACsec testing.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-06-03 20:27:44 +03:00
leiwei
a93b369c17 macsec: Support IEEE 802.1X(EAP)/PSK MACsec Key Agreement in hostapd
Signed-off-by: leiwei <leiwei@codeaurora.org>
2019-06-03 20:27:44 +03:00
leiwei
29c832d0ea macsec: Add configuration parameters for hostapd
Signed-off-by: leiwei <leiwei@codeaurora.org>
2019-06-03 20:27:44 +03:00
John Crispin
4f3f33804a HE: Make the basic NSS/MCS configurable
Add a config option to allow setting a custom Basic NSS/MCS set. As a
default we use single stream HE-MCS 0-7.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-05-27 17:45:04 +03:00
John Crispin
05b28306f5 HE: Add HE channel management configuration options
These are symmetric with the VHT ones.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-05-27 16:30:05 +03:00
Alona Solntseva
6b43264e79 hostapd_cli: Add update_beacon command
Add ability to use UPDATE_BEACON with hostapd_cli. The option has been
exposed in ctrl_iface already.

Signed-off-by: Alona Solntseva <alona.solntseva@tandemg.com>
Signed-off-by: Simon Dinkin <simon.dinkin@tandemg.com>
2019-05-25 16:17:44 +03:00
John Crispin
ad5224dd43 HE: Fix typo srp -> spr in hostapd configuration parameters
The initial commit used srp instead of spr for the spatial reuse
configuration prefix.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-05-05 00:59:18 +03:00
Toke Høiland-Jørgensen
ef7217518b hostapd: Add airtime policy configuration support
This adds support to hostapd for configuring airtime policy settings for
stations as they connect to the access point. This is the userspace
component of the airtime policy enforcement system PoliFi described in
this paper: https://arxiv.org/abs/1902.03439

The Linux kernel part has been merged into mac80211 for the 5.1 dev
cycle.

The configuration mechanism has three modes: Static, dynamic and limit.
In static mode, weights can be set in the configuration file for
individual MAC addresses, which will be applied when the configured
stations connect.

In dynamic mode, weights are instead set per BSS, which will be scaled
by the number of active stations on that BSS, achieving the desired
aggregate weighing between the configured BSSes. Limit mode works like
dynamic mode, except that any BSS *not* marked as 'limited' is allowed
to exceed its configured share if a per-station fairness share would
assign more airtime to that BSS. See the paper for details on these
modes.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
2019-05-02 14:57:43 +03:00
Jouni Malinen
b1664c8e4f HE: Fix he_bss_color documentation
This field needs to be set to a value within 1-63 range, i.e., 0 is not
a valid value and does not indicate that BSS color is disabled. B7 of
the BSS Color octet is used to indicate that the BSS Color is
_temporarily_ disabled, but that is something that would happen
automatically based on detecting a collision in the used BSS colors and
not something that would be configured.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-26 00:12:53 +03:00
Jouni Malinen
2b84ca4dd9 Share common SAE and EAP-pwd functionality: suitable groups
Start sharing common SAE and EAP-pwd functionality by adding a new
source code file that can be included into both. This first step is
bringing in a shared function to check whether a group is suitable.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-25 23:49:49 +03:00
John Crispin
2ec71488b5 HE: Add Spatial Reuse Parameter Set element to the Beacon frames
SPR allows us to detect OBSS overlaps and allows us to do adaptive CCA
thresholds. For this to work the AP needs to broadcast the element
first.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-04-25 12:15:36 +03:00
Jouni Malinen
e00f780e2b DPP2: hostapd as TCP Relay
The new hostapd configuration parameter dpp_controller can now be used
with the following subparameter values: ipaddr=<IP address>
pkhash=<hexdump>. This adds a new Controller into the configuration
(i.e., more than one can be configured) and all incoming DPP exchanges
that match the specified Controller public key hash are relayed to the
particular Controller.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-22 21:08:59 +03:00
Jouni Malinen
2ed2b52ff5 DPP: Add configuration structure to dpp_global_init()
This can be used to provide configurable parameter to the global DPP
context. This initial commit introduces the msg_ctx context pointer for
wpa_msg().

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-21 21:35:32 +03:00
Jouni Malinen
6396282430 Preparations for v2.8 release
Update the version number for the build and also add the ChangeLog
entries for both hostapd and wpa_supplicant to describe main changes
between v2.7 and v2.8.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-21 10:10:22 +03:00
Jouni Malinen
2f68051395 Fix hostapd BSS_TM_REQ handling of bss_term parameter
The TSF field in BSS termination information was not cleared correctly.
It was supposed to be cleared to all zeros, but the memset call did not
point at offset 2; instead, it cleared it with 0x02 octets and also
cleared the subelement header with 0x02 octets while leaving two last
octets uninitialized.

Fixes: a30dff07fb ("Add BSS_TM_REQ command to send BSS Transition Management Request")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-15 21:11:46 +03:00
Brendan Jackman
bbed23aee6 hostapd: Reduce minimum beacon interval from 15 to 10 TUs
Very short beacon intervals can be useful for certain scenarios such
as minimising association time on PBSSs. Linux supports a minimum of
10[1] so let's reduce the minimum to match that.

[1] https://elixir.bootlin.com/linux/latest/ident/cfg80211_validate_beacon_int

Signed-off-by: Brendan Jackman <brendan.jackman@bluwireless.co.uk>
2019-04-06 17:05:09 +03:00
Jouni Malinen
87d8435cf9 DPP: Common configurator/bootstrapping data management
Merge the practically copy-pasted implementations in wpa_supplicant and
hostapd into a single shared implementation in dpp.c for managing
configurator and boostrapping information. This avoid unnecessary code
duplication and provides a convenient location for adding new global DPP
data.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-24 17:29:45 +02:00
Jouni Malinen
c98617b48d DPP2: Make DPP version number support available over control interface
"GET_CAPABILITY dpp" can now be used to determine which version number
of DPP is supported in the build.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-15 00:31:09 +02:00
Jouni Malinen
ce7effd08f DPP2: Build configuration flags for DPP version 2 support
The new CONFIG_DPP2=y build option for hostapd and wpa_supplicant is
used to control whether new functionality defined after the DPP
specification v1.0 is included. All such functionality are considered
experimental and subject to change without notice and as such, not
suitable for production use.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-13 12:00:09 +02:00
Jared Bents
841205a1ce OpenSSL: Add 'check_cert_subject' support for TLS server
This patch added 'check_cert_subject' support to match the value of
every field against the DN of the subject in the client certificate. If
the values do not match, the certificate verification will fail and will
reject the user.

This option allows hostapd to match every individual field in the right
order, also allow '*' character as a wildcard (e.g OU=Development*).

Note: hostapd will match string up to 'wildcard' against the DN of the
subject in the client certificate for every individual field.

Signed-off-by: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-11 14:09:45 +02:00
Jouni Malinen
fc30f99b34 WPS: Allow AP SAE configuration to be added automatically for PSK
The new hostapd configuration parameter wps_cred_add_sae=1 can be used
to request hostapd to add SAE configuration whenever WPS is used to
configure the AP to use WPA2-PSK and the credential includes a
passphrase (instead of PSK). This can be used to enable WPA3-Personal
transition mode with both SAE and PSK enabled and PMF enabled for PSK
and required for SAE associations.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-06 21:52:43 +02:00
Jouni Malinen
941bad5ef4 SAE: Enable only group 19 by default in AP mode
Change the AP mode default for SAE to enable only the group 19 instead
of enabling all ECC groups that are supported by the used crypto library
and the SAE implementations. The main reason for this is to avoid
enabling groups that are not as strong as the mandatory-to-support group
19 (i.e., groups 25 and 26). In addition, this disables heavier groups
by default.

In addition, add a warning about MODP groups 1, 2, 5, 22, 23, and 24
based on "MUST NOT" or "SHOULD NOT" categorization in RFC 8247. All the
MODP groups were already disabled by default and would have needed
explicit configuration to be allowed.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-05 17:21:41 +02:00
Arnout Vandecappelle (Essensium/Mind)
8682f384ce hostapd: Add README-MULTI-AP
Document what hostapd and wpa_supplicant do for Multi-AP.

This is only included in hostapd, since a Multi-AP device is always an
access point so it should have hostapd.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2019-02-18 22:35:41 +02:00
Davina Lu
66819b07b5 hostapd: Support Multi-AP backhaul STA onboarding with WPS
The Wi-Fi Alliance Multi-AP Specification v1.0 allows onboarding of a
backhaul STA through WPS. To enable this, the WPS Registrar offers a
different set of credentials (backhaul credentials instead of fronthaul
credentials) when the Multi-AP subelement is present in the WFA vendor
extension element of the WSC M1 message.

Add new configuration options to specify the backhaul credentials for
the hostapd internal registrar: multi_ap_backhaul_ssid,
multi_ap_backhaul_wpa_psk, multi_ap_backhaul_wpa_passphrase. These are
only relevant for a fronthaul SSID, i.e., where multi_ap is set to 2 or
3. When these options are set, pass the backhaul credentials instead of
the normal credentials when the Multi-AP subelement is present.

Ignore the Multi-AP subelement if the backhaul config options are not
set. Note that for an SSID which is fronthaul and backhaul at the same
time (i.e., multi_ap == 3), this results in the correct credentials
being sent anyway.

The security to be used for the backaul BSS is fixed to WPA2PSK. The
Multi-AP Specification only allows Open and WPA2PSK networks to be
configured. Although not stated explicitly, the backhaul link is
intended to be always encrypted, hence WPA2PSK.

To build the credentials, the credential-building code is essentially
copied and simplified. Indeed, the backhaul credentials are always
WPA2PSK and never use per-device PSK. All the options set for the
fronthaul BSS WPS are simply ignored.

Signed-off-by: Davina Lu <ylu@quantenna.com>
Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Marianna Carrera <marianna.carrera.so@quantenna.com>
2019-02-18 22:35:41 +02:00
Jouni Malinen
b0e91e3877 SAE: VLAN assignment based on SAE Password Identifier
The new sae_password parameter [|vlanid=<VLAN ID>] can now be used to
assign stations to a specific VLAN based on which SAE Password
Identifier they use. This is similar to the WPA2-Enterprise case where
the RADIUS server can assign stations to different VLANs and the
WPA2-Personal case where vlanid parameter in wpa_psk_file is used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-17 17:24:23 +02:00
Hristo Venev
464064c7e5 hostapd: Document openssl_ecdh_curves configuration parameter
Signed-off-by: Hristo Venev <hristo@venev.name>
2019-02-17 14:01:57 +02:00
Jouni Malinen
dbfa691df4 VLAN assignment based on used WPA/WPA2 passphrase/PSK
Extend wpa_psk_file to allow an optional VLAN ID to be specified with
"vlanid=<VLAN ID>" prefix on the line. If VLAN ID is specified and the
particular wpa_psk_file entry is used for a station, that station is
bound to the specified VLAN. This can be used to operate a single
WPA2-Personal BSS with multiple VLANs based on the used passphrase/PSK.
This is similar to the WPA2-Enterprise case where the RADIUS server can
assign stations to different VLANs.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-14 13:36:54 +02:00
Jouni Malinen
fe468b0714 HE: Fix set_he_cap() parsing of config options for MU EDCA Params
When I replaced the POS() function with ffs() when applying relevant
parts from the original patch, this ended up breaking the frame
construction since the POS() function was supposed to count the bit
offset for the mask with 0 being the LSB instead of 1 returned by ffs().
Furthermore, ffs() is not available in all C libraries (e.g., not
directly exposed by strings.h on Android), so better not depend on that
or compiler builtins for this since there is no need for this to be as
fast as possible in configuration parsing.

Fix this with a simple function to determine the number of bits the
value needs to be shifted left to align with the mask.

Fixes: 11ce7a1bc3 ("HE: Add MU EDCA Parameter Set element (AP)")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-12 01:23:30 +02:00
Jared Bents
159a7fbdea crl_reload_interval: Add CRL reloading support
This patch adds a new flag 'crl_reload_interval' to reload CRL
periodically. This can be used to reload ca_cert file and the included
CRL information on every new TLS session if difference between the last
reload and the current time in seconds is greater than
crl_reload_interval.

This reloading is used for cases where check_crl is 1 or 2 and the CRL
is included in the ca_file.

Signed-off-by: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
2019-01-27 18:45:07 +02:00
Michal Kazior
83c8608132 AP: Add wpa_psk_file reloading in runtime
The wpa_psk_file can now be modified and hostapd can be told to re-read
it with the control interface RELOAD_WPA_PSK command:

 $ hostapd_cli reload_wpa_psk

It must be noted special care must be taken if WPS is configured
(wps_state=2, eap_server=1) because WPS appends PMKs to the
wpa_psk_file.

Signed-off-by: Michal Kazior <michal@plume.com>
2019-01-26 17:52:04 +02:00
Michal Kazior
ec5c39a557 AP: Allow identifying which passphrase station used with wpa_psk_file
It is now possible to optionally specify keyid for
each wpa_psk_file entry:

 keyid=something 00:00:00:00:00:00 secretpassphrase

When station connects and the passphrase it used
has an associated keyid it will be appended to the
AP-STA-CONNECTED event string:

 wlan0: AP-STA-CONNECTED 00:36:76:21:dc:7b keyid=something

It's also possible to retrieve it through the control interface:

 $ hostapd_cli all_sta
 Selected interface 'ap0'
 00:36:76:21:dc:7b
 ...
 keyid=something

New hostapd is able to read old wpa_psk_file. However, old hostapd will
not be able to read the new wpa_psk_file if it includes keyids.

Signed-off-by: Michal Kazior <michal@plume.com>
2019-01-26 17:52:04 +02:00
Masashi Honma
89896c0008 tests: Use python3 compatible print statement
This patch is made by using 2to3 command.

$ find . -name *.py | xargs 2to3 -f print -w -n

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 12:37:25 +02:00
Masashi Honma
bab493b904 tests: Use python3 compatible "except" statement
This patch is made by using 2to3 command.

$ find . -name *.py | xargs 2to3 -f except -w -n

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 12:11:35 +02:00
Jouni Malinen
13a200a92a FILS: Remove notes about experimental implementation
The standard amendment has been published and there has been sufficient
amount of interoperability testing for FILS to expect the protocol not
to be changed anymore, so remove the notes claiming this to be
experimental and not suitable for production use.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-22 13:33:48 +02:00
Ian Archer
9758b08bcf hostapd: Add support for setting pbss option from config file
There is currently no support for setting hostapd_bss_config.pbss from a
config file, i.e., it was used only based on automatic logic in
wpa_supplicant. This patch adds a key naturally called "pbss" which can
be used to set it.

Cc: Antony King <antony.king@bluwirelesstechnology.com>
Signed-off-by: Brendan Jackman <brendan.jackman@bluwirelesstechnology.com>
2019-01-21 12:35:59 +02:00
Siva Mullati
11ce7a1bc3 HE: Add MU EDCA Parameter Set element (AP)
Add support for configuring parameters for the MU EDCA Parameter Set
element per IEEE P802.11ax/D3.0.

Signed-off-by: Siva Mullati <siva.mullati@intel.com>
2019-01-08 17:22:43 +02:00
Jouni Malinen
02f52ab6f5 Use lchown() instead of chown() for self-created files
There is no need to allow symlink dereferencing in these cases where a
file (including directories and sockets) are created by the same
process, so use the safer lchown() variant to avoid leaving potential
windows for something external to replace the file before the chown()
call. The particular locations used here should not have write
permissions enabled for processes with less privileges, so this may not
be needed, but anyway, it is better to make these more restrictive
should there be cases where directory permissions are not as expected
for a good deployment.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-06 20:28:04 +02:00
Jouni Malinen
cc9c4feccc OpenSSL: Allow systemwide policies to be overridden
Some distributions (e.g., Debian) have started introducting systemwide
OpenSSL policies to disable older protocol versions and ciphers
throughout all programs using OpenSSL. This can result in significant
number of interoperability issues with deployed EAP implementations.

Allow explicit wpa_supplicant (EAP peer) and hostapd (EAP server)
parameters to be used to request systemwide policies to be overridden if
older versions are needed to be able to interoperate with devices that
cannot be updated to support the newer protocol versions or keys. The
default behavior is not changed here, i.e., the systemwide policies will
be followed if no explicit override configuration is used. The overrides
should be used only if really needed since they can result in reduced
security.

In wpa_supplicant, tls_disable_tlsv1_?=0 value in the phase1 network
profile parameter can be used to explicitly enable TLS versions that are
disabled in the systemwide configuration. For example,
phase1="tls_disable_tlsv1_0=0 tls_disable_tlsv1_1=0" would request TLS
v1.0 and TLS v1.1 to be enabled even if the systemwide policy enforces
TLS v1.2 as the minimum version. Similarly, openssl_ciphers parameter
can be used to override systemwide policy, e.g., with
openssl_ciphers="DEFAULT@SECLEVEL=1" to drop from security level 2 to 1
in Debian to allow shorter keys to be used.

In hostapd, tls_flags parameter can be used to configure similar
options. E.g., tls_flags=[ENABLE-TLSv1.0][ENABLE-TLSv1.1]

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-05 17:14:26 +02:00
Nils Nieuwejaar
ba4f3224ae Allow remote RADIUS authentication with local VLAN management
The documentation in the hostapd.conf file says that the dynamic_vlan
variable is used to control whether VLAN assignments are accepted from a
RADIUS server. The implication seems to be that a static VLAN assignment
will come from the accept_mac_file if dynamic_vlan is set to 0, and a
dynamic assignment will come from the RADIUS server if dynamic_vlan is
set to 1. Instead, I'm seeing that the static settings from the
accept_mac_file are ignored if dynamic_vlan is set to 0, but used if
dynamic_vlan is set to 1. If dynamic_vlan is set to 1 and the RADIUS
server does not provide a VLAN, then the accept_mac_file assignment is
overridden and the STA is assigned to the default non-VLANed interface.

If my understanding of the expected behavior is correct, then I believe
the problem is in ap_sta_set_vlan(). That routine checks the
dynamic_vlan setting, but has no way of determining whether the incoming
vlan_desc is static (i.e., from accept_mac_file) or dynamic (i.e., from
a RADIUS server).

I've attached a patch that gets hostapd working as I believe it's meant
to, and updates the documentation to make the implicit behavior
explicit.

The functional changes are:

- hostapd_allowed_address() will always extract the vlan_id from the
  accept_macs file. It will not update the vlan_id from the RADIUS cache
  if dynamic_vlan is DISABLED.

- hostapd_acl_recv_radius() will not update the cached vlan_id if
  dynamic_vlan is DISABLED.

- ieee802_1x_receive_auth() will not update the vlan_id if dynamic_vlan
  is DISABLED.

More cosmetic:

Most of the delta is just moving code out of ieee802_1x_receive_auth()
into a new ieee802_1x_update_vlan() routine. While I initially did this
because the new DISABLED check introduced excessive indentation, it has
the added advantage of eliminating the vlan_description allocation and
os_memset() call for all DYNAMIC_VLAN_DISABLED configs.

I've done a couple rounds of review offline with Michael Braun (who has
done much of the work in this part of the code) and incorporated his
feedback.

If dynamic_vlan=0 (disabled), vlan assignments will be managed using the
local accept_mac_file ACL file, even if a RADIUS server is being used
for user authentication. This allows us to manage users and devices
independently.

Signed-off-by: Nils Nieuwejaar <nils.nieuwejaar@gmail.com>
2019-01-02 23:27:49 +02:00
Avraham Stern
d6e7d4dede hostapd_cli: Add option to send beacon report request
This new 'req_beacon' command is useful for testing.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2019-01-02 16:26:11 +02:00
Lubomir Rintel
89a7cdd690 crypto: Add option to use getrandom()
According to random(4) manual, /dev/random is essentially deprecated on
Linux for quite some time:

"The /dev/random interface is considered a legacy interface, and
/dev/urandom is preferred and sufficient in all use cases, with the
exception of applications which require randomness during early boot
time; for these applications, getrandom(2) must be used instead, because
it will block until the entropy pool is initialized."

An attempt to use it would cause unnecessary blocking on machines
without a good hwrng even when it shouldn't be needed. Since Linux 3.17,
a getrandom(2) call is available that will block only until the
randomness pool has been seeded.

It is probably not a good default yet as it requires a fairly recent
kernel and glibc (3.17 and 2.25 respectively).

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-01-02 01:24:18 +02:00
Jouni Malinen
cc58a35735 Update copyright notices for the new year 2019
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-01 23:38:56 +02:00
Beni Lev
076f1ea1d9 OCE: Add RSSI based association rejection support (AP)
An AP might reject a STA association request due to low RSSI. In such
case, the AP informs the STA the desired RSSI improvement and a retry
timeout. The STA might retry to associate even if the RSSI hasn't
improved if the retry timeout expired.

Signed-off-by: Beni Lev <beni.lev@intel.com>
2019-01-01 18:18:50 +02:00
Sam Voss
dd5d325b0a hostapd: Add configuration option check_crl_strict
Add the ability to ignore time-based CRL errors from OpenSSL by
specifying a new configuration parameter, check_crl_strict=0.

This causes the following:

- This setting does nothing when CRL checking is not enabled.

- When CRL is enabled, "strict mode" will cause CRL time errors to not
  be ignored and will continue behaving as it currently does.

- When CRL is enabled, disabling strict mode will cause CRL time
  errors to be ignored and will allow connections.

By default, check_crl_strict is set to 1, or strict mode, to keep
current functionality.

Signed-off-by: Sam Voss <sam.voss@rockwellcollins.com>
2018-12-31 12:51:51 +02:00
Hristo Venev
d01203cafc hostapd: Add openssl_ecdh_curves configuration parameter
This makes it possible to use ECDSA certificates with EAP-TLS/TTLS/etc.
It should be noted that when using Suite B, different mechanism is used
to specify the allowed ECDH curves and this new parameter must not be
used in such cases.

Signed-off-by: Hristo Venev <hristo@venev.name>
2018-12-30 17:27:34 +02:00
Felix Fietkau
4d663233e6 hostapd: Support for overriding the bridge name per VLAN via vlan_file
This makes it easier to integrate dynamic VLANs in custom network
configurations. The bridge name is added after the interface name in the
vlan_file line, also separated by whitespace.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-12-21 12:02:57 +02:00
Prasad, Jagadeesh (Contractor)
d2b5138116 DPP: Add self configuration command in hostapd_cli and wpa_cli
The back-end support for DPP self configuration was already present in
hostapd and wpa_supplicant. However, the command to invoke DPP self
configuration was not available in hostapd_cli and wpa_cli. Add the
command "dpp_configurator_sign" in them.

Signed-off-by: Prasad, Jagadeesh <Jagadeesh_Prasad@comcast.com>
2018-12-21 12:02:57 +02:00
Jouni Malinen
53d5de6f1d DPP: Accept DPP_CONFIGURATION_SIGN without double space before parameters
Make this command more convenient to use by not requiring two space
characters between the command and the first parameter.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-21 12:02:57 +02:00
Venkateswara Naralasetty
9c06f0f6ae hostapd: Add Multi-AP protocol support
The purpose of Multi-AP specification is to enable inter-operability
across Wi-Fi access points (APs) from different vendors.

This patch introduces one new configuration parameter 'multi_ap' to
enable Multi-AP functionality and to configure the BSS as a backhaul
and/or fronthaul BSS.

Advertise vendor specific Multi-AP capabilities in (Re)Association
Response frame, if Multi-AP functionality is enabled through the
configuration parameter.

A backhaul AP must support receiving both 3addr and 4addr frames from a
backhaul STA, so create a VLAN for it just like is done for WDS, i.e.,
by calling hostapd_set_wds_sta(). Since Multi-AP requires WPA2 (never
WEP), we can safely call hostapd_set_wds_encryption() as well and we can
reuse the entire WDS condition.

To parse the Multi-AP Extension subelement, we use get_ie(): even though
that function is meant for parsing IEs, it works for subelements.

Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2018-12-20 01:04:14 +02:00
Mathy Vanhoef
6ab73efa72 OCV: Add utility functions to insert OCI elements
This commit adds utility functions to insert various encoding of the OCI
element.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-17 00:02:14 +02:00
Mathy Vanhoef
9c55fdb023 OCV: Add hostapd config parameter
Add hostapd.conf parameter ocv to disable or enable Operating Channel
Verification (OCV) support.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-16 20:31:21 +02:00
Mathy Vanhoef
138205d600 OCV: Add build configuration for channel validation support
Add compilation flags for Operating Channel Verification (OCV) support.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-16 20:31:21 +02:00
Jouni Malinen
7bd8c76a4f HS 2.0 server: RADIUS server support for SIM provisioning
This adds support for hostapd-as-RADIUS-authentication-server to request
subscription remediation for SIM-based credentials. The new hostapd.conf
parameter hs20_sim_provisioning_url is used to set the URL prefix for
the remediation server for SIM provisioning. The random
hotspot2dot0-mobile-identifier-hash value will be added to the end of
this URL prefix and the same value is stored in a new SQLite database
table sim_provisioning for the subscription server implementation to
use.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-15 18:01:38 +02:00
Jouni Malinen
6ae04d7b34 HS 2.0: Allow Hotspot 2.0 release number to be configured
The new hostapd configuration parameter hs20_release can be used to
configure the AP to advertise a specific Hotspot 2.0 release number
instead of the latest supported release. This is mainly for testing
purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-08 14:06:54 +02:00
Jouni Malinen
678d8410af Move send_probe_response parameter to BSS specific items
This can be more convenient for testing Multiple BSSID functionality.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-07 15:03:11 +02:00
Jouni Malinen
c2c6c01bb8 Update version to v2.7 and copyright years to include 2018
Also add the ChangeLog entries for both hostapd and wpa_supplicant to
describe main changes between v2.6 and v2.7.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 21:34:59 +02:00
Jouni Malinen
55570efe35 Uncomment CONFIG_LIBNL32=y in defconfig
libnl 3.2 release is much more likely to be used nowadays than the
versions using the older API, so uncomment this in wpa_supplicant and
hostapd defconfig.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 21:34:59 +02:00
Jouni Malinen
10c83475b8 Fix hostapd testing functionality for setting key/seq
Use sizeof() correctly on seq[].

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-30 21:28:19 +02:00
Jouni Malinen
cabbaac119 Fix a typo in a comment
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-11-26 00:37:24 +02:00
Damodaran, Rohit (Contractor)
cd676ae34c Fix dpp_configurator_get_key command name in hostapd_cli
The option to get DPP configurator key in hostapd_cli was named
incorrectly. It was wrongly pointing to dpp_configurator_remove. Fix
this by using the correct name.

Signed-off-by: Rohit Damodaran <Rohit_Damodaran@comcast.com>
2018-11-22 15:53:26 +02:00
Ankita Bajaj
0f0aa2a640 OCE: Move OCE checks to IE formation from hostapd initialization
Earlier, the OCE flags were checked during hostapd initialization. This
doesn't address few cases like for example when the interface is added
from control interface. Move the OCE flag checks to the functions that
are forming the MBO/OCE IEs to cover all the different paths for
enabling a BSS. Also use macros as appropriate for readability.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-30 15:43:01 +02:00
Jouni Malinen
d514b50265 WNM: Collocated Interference Reporting
Add support for negotiating WNM Collocated Interference Reporting. This
allows hostapd to request associated STAs to report their collocated
interference information and wpa_supplicant to process such request and
reporting. The actual values (Collocated Interference Report Elements)
are out of scope of hostapd and wpa_supplicant, i.e., external
components are expected to generated and process these.

For hostapd/AP, this mechanism is enabled by setting
coloc_intf_reporting=1 in configuration. STAs are requested to perform
reporting with "COLOC_INTF_REQ <addr> <Automatic Report Enabled> <Report
Timeout>" control interface command. The received reports are indicated
as control interface events "COLOC-INTF-REPORT <addr> <dialog token>
<hexdump of report elements>".

For wpa_supplicant/STA, this mechanism is enabled by setting
coloc_intf_reporting=1 in configuration and setting Collocated
Interference Report Elements as a hexdump with "SET coloc_intf_elems
<hexdump>" control interface command. The hexdump can contain one or
more Collocated Interference Report Elements (each including the
information element header). For additional testing purposes, received
requests are reported with "COLOC-INTF-REQ <dialog token> <automatic
report enabled> <report timeout>" control interface events and
unsolicited reports can be sent with "COLOC_INTF_REPORT <hexdump>".

This commit adds support for reporting changes in the collocated
interference (Automatic Report Enabled == 1 and partial 3), but not for
periodic reports (2 and other part of 3).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-30 14:07:51 +02:00
Beni Lev
86a6f5f888 WMM: Update WMM parameter advertisement on the fly
Update the Beacon frame template once WMM parameters have been changed
and the AP is already up.

Signed-off-by: Beni Lev <beni.lev@intel.com>
2018-10-16 12:26:59 +03:00
Jouni Malinen
cad810a98f HS 2.0: OSU Provider NAI List advertisement
Extend hostapd to allow the new OSU Provider NAI List ANQP-element to be
advertised in addition to the previously used OSU Providers list
ANQP-element. The new osu_nai2 configurator parameter option is used to
specify the OSU_NAI value for the shared BSS (Single SSID) case while
osu_nai remains to be used for the separate OSU BSS.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-05 20:49:42 +03:00
Hai Shalom
560e30bf3b Parse sae_password option when CONFIG_SAE is enabled
Call to parse_sae_password was incorrectly depending
on CONFIG_TESTING_OPTIONS and CONFIG_SAE. Should
depend only on the latter.

Fixes: 2377c1caef ("SAE: Allow SAE password to be configured separately (AP)")
Signed-off-by: Hai Shalom <haishalom@google.com>
2018-09-02 12:30:37 +03:00
Sathishkumar Muruganandam
47abe29aa9 hostapd: SET ht_capab support for disabling 40 MHz bandwidth
'hostapd_cli SET ht_capab' only checked for [HT40+] or [HT40-] or both
to be present. Based on the offset + or -, secondary_channel is updated
but HT20/VHT20 mode can be brought up only from config file and can't be
done using the SET command when the current HT mode is HT40+ or HT40-.

When managing AP+STA mode from userspace doing hostapd_cli: "disable ->
set channel, ht_capab -> enable" sequence, channel switch from
HT40/VHT40 to HT20/VHT20 was not possible with this SET ht_capab
limitation.

Cover this additional case by resetting secondary_channel to 0 for
HT20/VHT20 when ht_capab has neither [HT40+] nor [HT40-] present.

Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
2018-08-21 19:04:44 +03:00
Jouni Malinen
e7d73c378d Provide more details of WPA3 modes in hostapd.conf
Clarify that wpa=2 (i.e., RSN) is used for WPA3 and list previously
undocumented wpa_key_mgmt values.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-08-01 17:51:42 +03:00
Jouni Malinen
abed6136ae RADIUS: Add DAC implementation in hostapd(AS)
The new DAC_REQUEST control interface command can now be used to request
hostapd to send out Disconnect-Request and CoA-Request packets for an
existing session.

DAC_REQUEST <disconnect|coa> <MAC Address> [t_c_clear]

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-06-22 19:37:18 +03:00
Jouni Malinen
72aad113c2 RADIUS: Allow 0.0.0.0 to be used as wildard radius_das_client
This allows hostapd DAS to be configured to allow any DAC (with the
matching shared secret) to send Disconnect-Request and CoA-Request
packets.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-06-22 19:37:18 +03:00
Jouni Malinen
2122fc83aa RADIUS server: Add current_sessions SQLite table
This can be used to track active sessions, e.g., for the purpose of
issuing RADIUS DAS commands (Disconnect-Request or CoA-Request).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-06-22 19:37:03 +03:00
Jouni Malinen
d4e39c51f8 HS 2.0: Move Terms and Conditions Server URL generation from AP to AS
This makes it more convenient to generate the URL in a way that
interoperates between different vendors. The AP is simply copying the
already constructed URL as-is from Access-Accept to WNM-Notification.
This means that the HO AAA can generate the URL in a manner that works
for the associated T&C Server without having to coordinate with each AP.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-06-21 20:50:54 +03:00
Jouni Malinen
c6f2eceb8b FT: Add key management value FT-EAP-SHA384 for hostapd
This allows hostapd to be configuted to use the SHA384-based FT AKM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 20:16:37 +03:00
Jouni Malinen
8d660a4bac HS 2.0: Allow OSEN connection to be enabled in an RSN BSS
This allows a single BSS/SSID to be used for both data connection and
OSU. Instead of hostapd configuration osen=1, wpa_key_mgmt=OSEN (or more
likely, wpa_key_mgmt=WPA-EAP OSEN) is used to enable this new option.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-29 23:34:22 +03:00
Dan Harkins
d52ead3db7 EAP-pwd server: Add support for salted password databases
These changes add support for salted password databases to EAP-pwd per
RFC 8146. This commits introduces the framework for enabling this and
the salting mechanisms based on SHA-1, SHA256, and SHA512 hash
algorithms.

Signed-off-by: Dan Harkins <dharkins@lounge.org>
2018-05-28 22:08:51 +03:00
Jouni Malinen
9be19d0b9c SAE: Add support for using the optional Password Identifier
This extends the SAE implementation in both infrastructure and mesh BSS
cases to allow an optional Password Identifier to be used. This uses the
mechanism added in P802.11REVmd/D1.0. The Password Identifier is
configured in a wpa_supplicant network profile as a new string parameter
sae_password_id. In hostapd configuration, the existing sae_password
parameter has been extended to allow the password identifier (and also a
peer MAC address) to be set. In addition, multiple sae_password entries
can now be provided to hostapd to allow multiple per-peer and
per-identifier passwords to be set.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-19 17:30:29 +03:00
Sathishkumar Muruganandam
bda9c08596 hostapd: Fix CHAN_SWITCH command for VHT20 and VHT40
Previously, hostapd CHAN_SWITCH command did not effect VHT configuration
for the following:

When VHT is currently disabled (ieee80211ac=0),

1. hostapd_cli -p /var/run/hostapd chan_switch 10 5180 \
                sec_channel_offset=1 center_freq1=5190 bandwidth=40 ht

====> Comes up in HT40

2. hostapd_cli -p /var/run/hostapd chan_switch 10 5765 \
                sec_channel_offset=-1 center_freq1=5775 bandwidth=40 vht

====> Comes up in HT40

3. hostapd_cli -p /var/run/hostapd chan_switch 10 5200 center_freq1=5200 \
                                                  bandwidth=20 vht

====> Comes up in HT20

When VHT is currently enabled (ieee80211ac=1),

1. hostapd_cli -p /var/run/hostapd chan_switch 10 5180 \
                sec_channel_offset=1 center_freq1=5190 bandwidth=40 ht

====> Comes up in VHT40

2. hostapd_cli -p /var/run/hostapd chan_switch 10 5200 center_freq1=5200 \
                                                  bandwidth=20 ht

====> Comes up in VHT20

This is since VHT config from chan_switch is processed only for
bandwidths 80 and above (80P80, 160) and for VHT20, VHT40 cases, only
NLA chan type and chan width are updated.

There is no NL attribute for determining if it is HT or VHT for
bandwidths 20 & 40 and currently they are updated as HT20, HT40 (+ or -
depending on offset). Same is notified back via
NL80211_CMD_CH_SWITCH_NOTIFY.

Instead of adding new NL attribute for tracking HT/VHT enabled config,
we are adding new hostapd VHT config parameter to save the chan_switch
config and use only for chan_switch case of VHT20 and VHT40.

Tested with all combinations of chan_switch (noHT->20->40->80->) HT/VHT
and confirmed to be working.

Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
2018-05-16 01:16:54 +03:00
Sean Parkinson
3122121746 wolfSSL: Remove aes-omac1.o from hostapd build
Avoid duplicated omac1_*() functions when building hostapd with wolfSSL.

Signed-off-by: Sean Parkinson <sean@wolfssl.com>
2018-05-02 13:32:51 +03:00
Jouni Malinen
d501c27cfe EAP-TLS server: Disable TLS v1.3 by default
The current EAP peer implementation is not yet ready for the TLS v1.3
changes with EAP-TTLS, EAP-PEAP, and EAP-FAST, so disable TLS v1.3 for
this EAP method for now.

While the current EAP-TLS implementation is more or less complete for
TLS v1.3, there has been no interoperability testing with other
implementations, so disable for by default for now until there has been
chance to confirm that no significant interoperability issues show up
with TLS version update. tls_flags=[ENABLE-TLSv1.3] configuration
parameter can be used to enable TLS v1.3 (assuming the TLS library
supports it; e.g., when using OpenSSL 1.1.1).

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 22:13:38 +03:00
Jouni Malinen
bbbc7e8016 EAP-TLS: Extend TLS version config to allow TLS v1.3 to be disabled
This may be needed to avoid interoperability issues with the new
protocol version and significant changes for EAP use cases in both key
derivation and handshake termination.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 22:13:38 +03:00
Jouni Malinen
04ee197f87 HS 2.0: Maintain a database of pending T&C acceptance sessions
The new SQLite table pending_tc is used to maintain a list of sessions
that need to accept Terms and Conditions. This information can be used
on an external Terms and Conditions server to map the incoming MAC
address information into user identity.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-30 20:12:36 +03:00
Jouni Malinen
4526038092 HS 2.0: Terms and Conditions testing feature in authentication server
Allow hostapd RADIUS authentication server with SQLite EAP user DB to be
used for testing Terms and Conditions functionality. This could be used
for the HO AAA part of functionality (merging HO AAA and SP AAA into a
single component to avoid separate RADIUS proxy in testing setup).

A T&C server with HTTPS processing is needed to allow this to be used
for full over-the-air testing. This commit adds sufficient functionality
to allow hwsim test cases to cover the RADIUS server part.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-26 17:56:22 +03:00
Jouni Malinen
8760b9848c HS 2.0: Send Terms and Conditions Acceptance notification
This extends hostapd Access-Accept processing to check if the RADIUS
server indicated that Terms and Conditions Acceptance is required. The
new hs20_t_c_server_url parameter is used to specify the server URL
template that the STA is requested to visit.

This commit does not enable any kind of filtering, i.e., only the part
of forwarding a request from Access-Accept to the STA using
WNM-Notification is covered.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:47 +03:00
Jouni Malinen
6cb8f4f382 HS 2.0: Terms and Conditions attributes in Access-Request messages
This extends hostapd with two new configuration parameters
(hs20_t_c_filename and hs20_t_c_timestamp) that can be used to specify
that the Terms and Conditions attributes are to be added into all
Access-Request messages for Hotspot 2.0 STAs.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:47 +03:00
Jouni Malinen
0e450db285 HS 2.0: Allow configuration of operator icons
This extends hostapd Hotspot 2.0 implementation to allow operator icons
to be made available. The existing hs20_icon parameter is used to define
the icons and the new operator_icon parameter (zero or more entries) is
used to specify which of the available icons are operator icons. The
operator icons are advertised in the Operator Icon Metadata ANQP-element
while the icon data can be fetched using the same mechanism (icon
request/binary file) that was added for the OSU Providers icons.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-17 16:40:47 +03:00
Andrey Utkin
4449efeb1d Fix building nt_password_hash with gnutls
Even with

    CONFIG_TLS=gnutls
    CONFIG_CRYPTO=gnutls

in .config, nt_password_hash was linked with libcrypto instead of
libgcrypt, which caused linkage failure.

Signed-off-by: Andrey Utkin <andrey_utkin@gentoo.org>
2018-04-15 21:55:06 +03:00
Michael Braun
3a3e28320b FT: Add expiration to PMK-R0 and PMK-R1 cache
IEEE Std 802.11-2016, 12.7.1.7.1 indicates that the lifetime of the
PMK-R0 (and PMK-R1) is bound to the lifetime of PSK or MSK from which
the key was derived. This is currently stored in r0_key_lifetime, but
cache entries are not actually removed.

This commit uses the r0_key_lifetime configuration parameter when
wpa_auth_derive_ptk_ft() is called. This may need to be extended to use
the MSK lifetime, if provided by an external authentication server, with
some future changes. For PSK, there is no such lifetime, but it also
matters less as FT-PSK can be achieved without inter-AP communication.

The expiration timeout is then passed from R0KH to R1KH. The R1KH verifies
that the given timeout for sanity, it may not exceed the locally configured
r1_max_key_lifetime.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2018-04-05 13:58:20 +03:00
Michael Braun
83fe4bd3bf FT: Convert r0_key_lifetime to seconds
Add a new configuration option ft_r0_key_lifetime that deprecates
r0_key_lifetime. Though, the old configuration is still accepted for
backwards compatibility.

This simplifies testing. All other items are in seconds as well. In
addition, this makes dot11FTR0KeyLifetime comment match with what got
standardized in the end in IEEE Std 802.11r-2008.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2018-04-05 13:47:23 +03:00
Jouni Malinen
7e1d3ee963 Add hostapd.conf venue_url to set Venue URL ANQP-element
The new venue_url parameter can now be used to set the Venue URL ANQP
information instead of having to construct the data and use
anqp_elem=277:<hexdump> to set the raw value.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-03-26 16:10:47 +03:00
Jouni Malinen
f6de72534e Add NOTE control interface command for hostapd
This does the same as the matching command in wpa_supplicant, i.e., add
a note in the debug log.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-03-26 12:31:04 +03:00
Jouni Malinen
0fa669bcae Fix a resource leak on hostapd maclist parsing error path
The open file needs to be closed in error case. The conversion to using
a new helper function (hostapd_add_acl_maclist) somehow managed to
remove the neede fclose(f) call. Bring it back to fix this.

Fixes: 3988046de5 ("hostapd: Dynamic MAC ACL management over control interface")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-03-21 22:34:09 +02:00
Bhagavathi Perumal S
2df73f52e8 Add hostapd_cli poll_sta command
This uses the already existing POLL_STA control interface to poll an
associated station to check connectivity.

Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2018-03-19 19:14:40 +02:00
Purushottam Kushwaha
8179ae3a2a DPP: Support retrieving of configurator's private key
To retain configurator information across hostapd/wpa_supplicant
restart, private key need to be maintained to generate a valid pair of
authentication keys (connector, netaccess_key, csign) for new enrollees
in the network.

Add a DPP_CONFIGURATOR_GET_KEY control interface API through which the
private key of an existing configurator can be fetched.

Command format:
DPP_CONFIGURATOR_GET_KEY <configurator_id>

The output from this command can then be used with
"DPP_CONFIGURATOR_ADD key=<hexdump>" to create the same key again.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-03-16 20:55:32 +02:00
Sean Parkinson
fec03f9838 Add support for wolfSSL cryptographic library
Allow hostapd/wpa_supplicant to be compiled with the wolfSSL
cryptography and TLS library.

Signed-off-by: Sean Parkinson <sean@wolfssl.com>
2018-03-03 11:52:40 +02:00
Jouni Malinen
427729ee67 Reject eap_server_erp hostapd.conf parameter without CONFIG_ERP=y
This provides an explicit error report if runtime configuration is not
valid and ERP server functionality cannot be used.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-28 13:09:07 +02:00
Jouni Malinen
4b07484c3d DPP: Do not include common/dpp.h without CONFIG_DPP=y
This header file pulls in an OpenSSL header file and as such, should not
be included without CONFIG_DPP=y to avoid bringing in an unnecessary
build dependency on OpenSSL header files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-02-17 18:07:43 +02:00
Tamizh chelvam
3988046de5 hostapd: Dynamic MAC ACL management over control interface
Previously, MAC ACL could be modified only through file operations
(modify accept/deny_mac_file and reload it to hostapd). Extend this to
allow MAC ACL to be modified and displayed through new control interface
commands:

ACCEPT_ACL <subcmd> [argument]
DENY_ACL <subcmd> [argument]

subcmd: ADD_MAC <addr>[ VLAN_ID=<id>]|DEL_MAC <addr>|SHOW|CLEAR

Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
2018-02-07 19:45:21 +02:00
Jouni Malinen
b7ed94834d GnuTLS: Add option to build with libnettle instead of libgcrypt
GnuTLS-based builds can now be done using either libnettle or libgcrypt
for crypto functionality:

CONFIG_TLS=gnutls
CONFIG_CRYPTO=nettle

CONFIG_TLS=gnutls
CONFIG_CRYPTO=gnutls

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-12-29 17:13:57 +02:00
Jouni Malinen
133f8d09fc GnuTLS: Implement HMAC functions using libgcrypt
Replace the internal HMAC MD5, SHA-1, and SHA256 implementations with
the ones from libgcrypt and also add the SHA384 and SHA512 versions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-12-27 23:35:26 +02:00
Jouni Malinen
85c12a62ee GnuTLS: Implement sha{256,384,512}_vector() using libgcrypt
Replace the internal SHA256 implementation with the one from libgcrypt
and also add the SHA384 and SHA512 versions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-12-27 23:21:37 +02:00