Commit graph

101 commits

Author SHA1 Message Date
Jouni Malinen
349493bd0c Validate WEP key lengths based on driver capabilities
The nl80211 driver interface does not allow 128-bit WEP to be used
without a vendor specific cipher suite and no such suite is defined for
this purpose. Do not accept WEP key length 16 for nl80211 driver
interface forn ow. wext-interface can still try to use these for
backwards compatibility.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-10 14:34:46 +03:00
Jay Katabathuni
66aadbd7bf HS 2.0: Add runtime configuration of Hotspot 2.0 station
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-08 23:29:45 +03:00
Jouni Malinen
fea7c3a055 Ignore network blocks that have invalid WEP key length
Do not try to associate with a network that has an invalid or incomplete
configuration because the association or at least data connection would
fail anyway. This commits adds a common function for checking whether a
network block is disabled to make it easier to check network blocks
without having to reject them during configuration file parsing (which
would prevent wpa_supplicant from starting). The only additional check
added in this commit is to verify the WEP key length. Similar checks for
other parameters can be added in future commits.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-07 13:39:33 +03:00
Wei-Jen Lin
1298c14594 Allow pbc_in_m1 workaround to be enabled in wpa_supplicant AP mode
This workaround for Windows 7 WPS probing mechanism was previously
allowed only with hostapd, but the same interoperability issue can
happen with wpa_supplicant AP/GO mode. Allow the workaround to be
enabled in wpa_supplicant configuration for these uses.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-03 16:51:04 +03:00
Jouni Malinen
54ddd74369 Add disable_scan_offload parameter to disable automatic scan offloading
This new configuration parameter can be used to disable automatic
offloading of scan requests to the driver which was previously used
by default if the driver supported sched_scan.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-17 16:30:15 +03:00
Jouni Malinen
5f482d55fd P2P: Allow immediate group idle timeout configuration
A special value p2p_group_idle=-1 can now be used to configure the P2P
group idle mechanism to terminate a P2P client group immediately on any
disconnection after the completion of the initial 4-way handshake.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-13 17:03:27 +03:00
Anirban Sirkhell
71dd3b78f9 WPS: Allow vendor specific attribute to be added into M1
wps_vendor_ext_m1 configuration parameter can now be used to add a
vendor specific attribute into the WPS M1 message, e.g., for
Windows Vertical Pairing.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-04 00:08:57 +03:00
Jouni Malinen
21d996f775 P2P: Add support for preferred channel list
p2p_pref_chan configuration parameter can now be used to set the
list of preferred channel for P2P GO Negotiation. This will be used
in the priority order if the peer does not support the channel we
are trying to use as the GO (configured operating channel or the
best 2.4 GHz/5 GHz channel) for the case where a forced channel is
not used.

p2p_pref_chan=<op class:channel>,...

For example:
p2p_pref_chan=81:1,81:2,81:3,81:4,81:5,81:6

This would configure 2.4 GHz channels 1-6 as the preferred ones with
channel 1 the most preferred option.

These configuration parameters can be set in wpa_supplicant.conf and
dynamically updated with "wpa_cli set <param> <value>".

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-29 21:28:34 +03:00
Jouni Malinen
d7b01abd5e Interworking: Support real SIM/USIM card for network selection
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-03-04 16:02:56 +02:00
Jouni Malinen
11e4f46a10 Interworking: Add support for certificate credentials (EAP-TLS)
This allows Interworking network selection to be used with EAP-TLS
(client certificate/private key based credential).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-03 10:38:10 +02:00
Jouni Malinen
f64adcd71e Allow PC/SC reader to be selected and initialized at start
New global configuration parameters pcsc_reader and pcsc_pin can now be
used to initialize PC/SC reader context at start of wpa_supplicant.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-26 13:09:30 +02:00
Jouni Malinen
1a712d2fc1 Interworking: Add support for credential priorities
This allows credentials to be set with a specific priority to allow
the automatic network selection behavior to be controlled with user
preferences. The priority values are configured to the network block
and BSS selection will select the network based on priorities from
both pre-configured network blocks and credentials.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-16 16:37:21 +02:00
Jouni Malinen
d94c9ee6ad Interworking: Add ctrl_iface commands for managing credentials
New wpa_cli commands list_creds, add_cred, remove_cred, and set_cred
can now be used to manage credentials similarly to the commands used
with network blocks.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-16 16:36:00 +02:00
Jouni Malinen
1bb7b8e84c Interworking: Add support for multiple credentials
This replaces the global home_* parameters with a list of credentials
that can be configured similarly to network blocks. For example:

cred={
	realm="example.com"
	username="user@example.com"
	password="password"
	ca_cert="/etc/wpa_supplicant/ca.pem"
	domain="example.com"
}

cred={
	imsi="310026-000000000"
	milenage="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123"
}

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-16 16:34:22 +02:00
Jouni Malinen
00bf219ddb Interworking: Add support for home vs. visited SP determination
Use Domain Name List (ANQP) and the new home_domain configuration
parameter to figure out whether a network is operated by the home
service provider and if so, prefer it over networks that would
require roaming.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-16 16:32:00 +02:00
Jouni Malinen
0f3d578efc Remove the GPL notification from files contributed by Jouni Malinen
Remove the GPL notification text from the files that were
initially contributed by myself.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-11 19:39:36 +02:00
Jouni Malinen
c81066153c P2P: Use hardcoded idle timeout of 10 seconds in P2P client role
The p2p_group_idle configuration parameter is much more useful for
GO role, so use a separate hardcoded value of 10 seconds in P2P
client role. In practice, this means that the P2P client role will
automatically tear down the group when the GO tears down the group.

The 10 second timeout is enough to recover from temporary disconnections
without unnecessary tearing down the group if the GO is still present
and allows the client to connect.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-18 22:21:22 +02:00
Jouni Malinen
11540c0b21 Interworking: Allow ANT to be configured for Probe Request frames
Access Network Type can now be configured (default: 15 = wildcard) to
limit which APs reply to the scan.
2011-10-21 12:44:29 +03:00
Jouni Malinen
3b840b6748 Interworking: Support for using EAP-SIM credentials in network selection
New configuration parameters home_imsi and home_milenage can be used
to configure SIM/USIM simulator parameters for network selection based
on SIM/USIM credentials.

home_imsi=(MCC | MNC | '-' | rest of IMSI)
home_milenage=(Ki):(OPc):(SQN)

For example:
home_imsi=310026-000000000
home_milenage=90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123
2011-10-16 23:55:34 +03:00
Jouni Malinen
67e1b98463 Interworking: Support username/password based network selection
Add support for network selection for username/password credentials with
EAP-TTLS and EAP-PEAP. The new global configuration parameters
home_username, home_password, and home_ca_cert can be used to specify
credentials for network selection.
2011-10-16 23:55:34 +03:00
Jouni Malinen
73c41a8fab Interworking: Parse NAI Realms and match against home realm 2011-10-16 23:55:34 +03:00
Jouni Malinen
46ee0427b1 IEEE 802.11u: Allow Interworking and HESSID to be configured
The new wpa_supplicant.conf file global parameters interworking and
hessid can be used to configure wpa_supplicant to include
Interworking element in Probe Request frames.
2011-10-16 23:55:34 +03:00
Pavel Roskin
ffbf1eaa26 Fix typos found by codespell
Signed-off-by: Pavel Roskin <proski@gnu.org>
2011-09-22 00:43:59 +03:00
Jayant Sane
2463ba70e2 P2P: Update listen and operating channel from P2P D-Bus
Some P2PDevice properties were not updated in p2p->cfg structure:
reg_class, channel, op_reg_class, and op_channel. Hence, update p2p->cfg
parameters through p2p core calls in wpas_p2p_update_config().

Signed-off-by: Jean-Michel.Bachot <jean-michelx.bachot@intel.com>
Signed-off-by: Jayant Sane <jayant.sane@intel.com>
2011-06-25 12:08:43 +03:00
Sam Leffler
78633c3709 wpa_supplicant: Parameterize BSS table expiration age + count
Replace compile-time BSS cache expiration age and scan count by config
parameters that can be set via wpa_cli and the new D-Bus API. The latter
is done with interface properties BSSExpireAge and BSSExpireCount.
2011-03-20 12:40:59 +02:00
Jouni Malinen
87880919ad Fix a typo in a comment 2011-03-20 12:15:02 +02:00
Sam Leffler
7c49fdd0bd dbus: Add RemoveAllNetworks to the new D-Bus API
This adds a new command to the interface to remove all configured
netblocks. Without this it's necessary to query properties on the
interface and explicitly remove each netblock.
2011-03-20 12:12:12 +02:00
Jean-Michel Bachot
f95cac271b P2P: Allow adding of WPS vendor extension attributes
This adds the ability to add WPS vendor extension attributes in P2P
frames, like GO Negotiation and Probe Response frames.

Signed-off-by: Jean-Michel Bachot <jean-michelx.bachot@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-19 12:22:18 +02:00
Johannes Berg
2f646b6e83 WPS: Store (secondary) device type as binary
Instead of converting back and forth from the string representation,
always use the binary representation internally.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-17 18:50:22 +02:00
Johannes Berg
0d7e5a3a29 Allow AP mode to disconnect STAs based on low ACK condition
The nl80211 driver can report low ACK condition (in fact it reports
complete loss right now only). Use that, along with a config option, to
disconnect stations when the data connection is not working properly,
e.g., due to the STA having went outside the range of the AP. This is
disabled by default and can be enabled with disassoc_low_ack=1 in
hostapd or wpa_supplicant configuration file.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-12-28 17:15:01 +02:00
Jouni Malinen
3071e18109 P2P: Add mechanism for timing out idle groups
A new configuration parameter, p2p_group_idle, can now be used to set
idle timeout value for P2P groups in seconds (0 = no timeout). If set,
this values is used to remove P2P group (both GO and P2P client)
interfaces after the group has been idle (no clients/GO seen) for the
configuration duration.

The P2P-GROUP-REMOVED event is now indicating the reason for group
removal when known. For example:
P2P-GROUP-REMOVED wlan0 GO reason=REQUESTED
P2P-GROUP-REMOVED wlan1 client reason=IDLE
2010-10-25 18:24:15 +03:00
Jouni Malinen
dae608d5d3 Add max_num_sta config option for wpa_supplicant AP mode
This can be used to limit the number of stations allowed to be
connected to the AP.
2010-10-19 17:08:20 +03:00
Sudhakar Swaminathan
0f66abd25b P2P: Add option for disabling intra BSS distribution
p2p_intra_bss configuration parameter can now be used to
disable/enable intra BSS distribution (bridging of frames between
the clients in a group).
2010-09-10 10:30:26 -07:00
Jouni Malinen
1c9cb49fe9 Trigger WPS configuration update on string changes
Previously, only Device Name string was handled, but similar trigger
is needed on Manufacturer, Model Name, Model Number, and Serial Number
changes.
2010-09-09 07:17:21 -07:00
Jouni Malinen
e3768e7c94 P2P: Add global configuration parameters for P2P 2010-09-09 07:17:16 -07:00
Jouni Malinen
1d47214aa9 Add flag indicating which global configuration parameters have changed 2010-09-09 07:17:16 -07:00
Jouni Malinen
121adf9c2e Move global configuration parser into config.c
This makes it easier to provide support for dynamic updates of the
global configuration parameters while wpa_supplicant is running.
2010-09-09 07:17:16 -07:00
Jouni Malinen
6a857074f4 WPS 2.0: Add virtual/physical display and pushbutton config methods 2010-09-09 06:07:47 -07:00
Dmitry Shmidt
aa53509ffe Update priority list after priority change
Despite comments in the wpa_config_update_prio_list(struct wpa_config
*config) telling that it is called "if priority for a network is
changed", it is apparently not.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2010-03-06 11:13:50 +02:00
Jouni Malinen
3812464cda Add optional scan result filter based on SSID
filter_ssids=1 global configuration parameter can now be used to
enable scan result filtering (with -Dnl80211 only for now) based on
the configured SSIDs. In other words, only the scan results that have
an SSID matching with one of the configured networks are included in the
BSS table. This can be used to reduce memory needs in environments that
have huge number of APs.
2010-03-05 21:42:06 +02:00
Jouni Malinen
c9c38b0996 Make maximum BSS table size configurable
New global configuration parameter bss_max_count can now be used to
change the maximum BSS table size. The old fixed size limit (200) is
used as the default value for this parameter.
2010-03-05 20:20:09 +02:00
Jouni Malinen
c0e4dd9eeb WPS: Make Config Methods configurable for wpa_supplicant
This adds config_methods configuration option for wpa_supplicant
following the design used in hostapd. In addition, the string is
now parsed in common code from src/wps/wps_common.c and the list
of configurable methods include all the defined methods from
WPS 1.0h spec.
2009-12-21 15:59:25 +02:00
Jouni Malinen
2d106f21aa Remove unnecessary defines
The following defines are not really needed in most places, so
remove them to clean up source code and build scripts:
EAP_TLS_FUNCS
EAP_TLS_OPENSSL
EAP_TLS_GNUTLS
CONFIG_TLS_INTERNAL
2009-12-05 22:51:08 +02:00
Witold Sowa
3d3d305645 Add dbus mechanism for fetching all network configuration parameters 2009-11-11 17:17:00 +02:00
Jouni Malinen
476621644c WPS: Add configurable option for processing credentials externally
The wps_cred_process option can be used to configure wpa_supplicant to
send received Credential attributes for external processing over
ctrl_iface and dbus. This allows external programs to update their
configuration when WPS is used to provision new networks.
2009-01-18 12:27:12 +02:00
Jouni Malinen
b39d1280a7 Silenced number of Doxygen warnings 2009-01-04 15:07:54 +02:00
Jouni Malinen
3c0b7aa4fe Added configuration of WPS device parameters for wpa_supplicant 2008-12-13 17:20:46 +02:00
Jouni Malinen
315ce40a00 Renamed the 'alpha2' variable to 'country' to match with config string 2008-12-09 22:15:47 +02:00
Luis R. Rodriguez
6d1584905c wpa_supplicant: Add support for setting of a regulatory domain
This adds support for setting of a regulatory domain to wpa_supplicant
drivers. It also adds regulatory domain setting for the nl80211 driver.
We expect an ISO / IEC 3166 alpha2 in the wpa configuration file as a
global.
2008-12-09 22:11:14 +02:00
Jouni Malinen
f855f923a7 WPS: Moved UUID configuration from phase1 into global config area 2008-11-26 20:47:24 +02:00
Jouni Malinen
6fc6879bd5 Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release 2008-02-27 17:34:43 -08:00