Commit graph

71 commits

Author SHA1 Message Date
Jouni Malinen
f05a893eda tests: Check MESH flag in BSS output in wpas_mesh_mode_scan
In addition, use a single channel scan to make the test case run faster.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-22 14:17:48 +02:00
Jouni Malinen
e3b38d6e04 tests: Mesh network on 5 GHz band and 20/40 coex change
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-13 20:07:52 +02:00
Jouni Malinen
d283f7aeac tests: Increase timeout in wpas_mesh_password_mismatch
There has been number of failures from this test case due to the
MESH-SAE-AUTH-FAILURE event from dev[0] and dev[1] arriving couple of
seconds after the one second timeout after the dev[2] events. This does
not look like a real issue, so increase the timeout to five seconds to
make this less likely to show false failures during testing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-11 20:08:39 +02:00
Jouni Malinen
a8ef83f49d tests: Mesh network and SELECT_NETWORK
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-10-09 17:09:56 +03:00
Jouni Malinen
5c30a84b91 tests: mode=mesh in STATUS
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-22 23:20:48 +03:00
Jouni Malinen
b136894fb0 tests: MPM protocol testing - CLS_ACPT event in OPN_SNT
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-29 01:56:26 +03:00
Jouni Malinen
434f8f7f82 tests: MPM protocol testing - CLS_ACPT event in CNF_RCVD
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-29 01:49:42 +03:00
Jouni Malinen
68f326d5fc tests: Mesh MPM FSM and HOLDING state event OPN_ACPT
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-29 01:43:50 +03:00
Jouni Malinen
09d554d1a6 tests: Secure mesh network connectivity failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-28 20:52:21 +03:00
Jouni Malinen
c3456015fd tests: Mesh peering management protocol testing for peer addition
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-28 20:52:04 +03:00
Jouni Malinen
d80d8c6ffc tests: Open mesh network connectivity, no_auto on both peers
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-28 20:44:58 +03:00
Jouni Malinen
e18d170848 tests: wpa_state == COMPLETED in mesh
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-24 19:02:58 +03:00
Jouni Malinen
51435515fb tests: mesh_scan_oom to support partial BSS result reporting
The next commit modifies the BSS command behavior to report partial
results for a BSS, so mesh_scan_oom needs to allow a BSS entry to be
returned as long as it does not include the mesh information.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-19 23:48:07 +03:00
Jouni Malinen
94e8fe90c2 tests: Mesh with various pairwise and group ciphers
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-19 20:18:09 +03:00
Jouni Malinen
074f72849f tests: Secure mesh network connectivity with PMF enabled
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-18 12:20:50 +03:00
Jouni Malinen
7309e804cf tests: Make mesh_missing_mic more robust
Check for MESH-PEER-CONNECTED from dev[1] before reporting MGMT-RX
timeout errors from dev[0]. This avoids false failures in case the short
0.01 s timeout at the end of the loop was not long enough to catch the
message.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-17 02:05:10 +03:00
Jouni Malinen
0b1b2044cc tests: Add sniffer check to wpas_mesh_max_peering
This verifies that the Accepting Additional Mesh Peerings field is being
cleared properly when the maximum peer links count is reached.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-13 00:04:47 +03:00
Jouni Malinen
a3bd53273e tests: Additional coverage in mesh_sae_groups_invalid
Additional coverage in mesh_rsn_sae_group() with non-zero
wpa_s->mesh_rsn->sae_group_index.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-12 17:56:02 +03:00
Jouni Malinen
739fd20cc3 tests: Mesh peering management protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 11:43:37 +03:00
Jouni Malinen
81d6e230e3 tests: Secure mesh network and PMKID mismatch
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 11:17:00 +03:00
Jouni Malinen
66bb7d97dd tests: Secure mesh network and missing MIC
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 01:20:28 +03:00
Jouni Malinen
98628b7f07 tests: Mesh and failure to derive random nonce
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 00:24:47 +03:00
Jouni Malinen
044d739bdd tests: Secure mesh network and PMKSA caching failing due to OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 00:20:06 +03:00
Jouni Malinen
e8739be842 tests: Mesh scan element parse error
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 00:13:40 +03:00
Jouni Malinen
699074d30c tests: Mesh network setup failing due to driver command failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 00:13:40 +03:00
Jouni Malinen
521a98a8f6 tests: Mesh and default beacon interval
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 21:47:22 +03:00
Jouni Malinen
ec87430ba1 tests: Extend coverage for mesh OOM testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 21:44:19 +03:00
Jouni Malinen
56d62fc3dd tests: Open mesh network on VHT 160 MHz channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 21:31:51 +03:00
Jouni Malinen
2cf6341e64 tests: Mesh and invalid frequency configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 20:59:39 +03:00
Jouni Malinen
a64476403d tests: Mesh and local failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 00:40:38 +03:00
Jouni Malinen
b0ec3d772a tests: Mesh and local SAE failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 00:30:49 +03:00
Jouni Malinen
f0ee4535d2 tests: Mesh with invalid SAE group configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 00:08:16 +03:00
Jouni Malinen
9ec916e9f4 tests: wpa_supplicant secure MESH and SAE group negotiation
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-30 21:15:30 +03:00
Jouni Malinen
582841689f tests: Secure mesh network setup local failure
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-30 21:10:58 +03:00
Jouni Malinen
4d4cdc3bb2 tests: wpa_supplicant mesh scan results and OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-30 20:03:32 +03:00
Jouni Malinen
aa59370b34 tests: wpa_supplicant mesh with dynamic interface addition failing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-30 01:50:09 +03:00
Jouni Malinen
b15acadcfd tests: Mesh network setup failing due to OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-30 01:05:16 +03:00
Jouni Malinen
df49b90e35 tests: Secure mesh and the first plink Open dropped
This is a regression test case to verify that MTK is calculated properly
also in this unexpected sequence.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-13 20:54:51 +03:00
Jouni Malinen
5a34d359cd tests: Secure mesh network and PMKSA caching
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-20 18:24:29 +02:00
Bob Copeland
fa7f9570f2 tests: Add a test for mesh gate forwarding
This test checks that mesh nodes forward frames for unknown
destinations to the mesh gates.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
2016-03-07 11:05:22 +02:00
Jouni Malinen
fe28ed3f29 tests: Secure mesh network plink counting during reconnection
This verifies that num_plinks is decremented properly if a peer mesh STA
reconnects without closing the link explicitly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-02-06 21:25:52 +02:00
Jouni Malinen
a74a1e4eab tests: Open mesh network on VHT 80+80 MHz channel
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 18:47:40 +02:00
Jouni Malinen
71a3b85fff tests: mesh_basic_rates
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 00:50:17 +02:00
Jouni Malinen
2fca1f67cf tests: Secure mesh network setup failing due to wpa_init() OOM
This is a regression test for incorrect error path behavior that was
fixed in the previous commits.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 21:31:25 +03:00
Jouni Malinen
792eafa047 tests: Make wpas_mesh_password_mismatch more robust
It seems to be possible for dev2 (the one with incorrect password) to
stop retries before either dev0 or dev1 reports the authentication
failure event. For now, allow the test case pass if either dev0 or dev1
reports the event rather than requiring both to report this. The
expected behavior can be fine-tuned in the future if the reporting
behavior is modified to be more consistent.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-12 15:50:52 +02:00
Jouni Malinen
f77d6d4bd8 tests: Mesh authentication failure events
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 13:25:35 +02:00
Jouni Malinen
0ff7afbc42 tests: Verify mesh support for wpas_add_set_remove_support
This test case fails if wpa_supplicant is built without mesh support, so
need to check for this.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
2f0347954a tests: Check mesh capability based on the modes capabilities list
This is more robust than checking the driver capability because it is
also possible for the wpa_supplicant build to be configured without mesh
support regardless of whether the driver supports it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
b9749b6aaa tests: Verify that SAE is supported for test cases requiring it
This makes it more convenient to run tests with wpa_supplicant builds
that do not support SAE (e.g., due to crypto library not providing
sufficient functionality for this).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
70437ae55a tests: Drop mesh_ht_mode parameter from mesh test cases
This network profile parameter will be removed with the cleanup that
makes mesh use shared functions for setting channel parameters. That
will allow HT to be enabled automatically based on driver capabilities.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00