Commit graph

937 commits

Author SHA1 Message Date
Jouni Malinen
8dd9f9cdde Allow management group cipher to be configured
This allows hostapd to set a different management group cipher than the
previously hardcoded default BIP (AES-128-CMAC). The new configuration
file parameter group_mgmt_cipher can be set to BIP-GMAC-128,
BIP-GMAC-256, or BIP-CMAC-256 to select one of the ciphers defined in
IEEE Std 802.11ac-2013.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-14 21:58:45 +02:00
Jouni Malinen
b4c26ef997 Clean up hostapd_config_fill() parsers
Some of the parsing code was using a bit too complex design and could be
simplified after the earlier return-on-error cleanups.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-12 01:09:21 +02:00
Jouni Malinen
b2e32cde83 Fix memory leaks on wpa_config_parse_string() error paths
hostapd configuration parser did not free the temporary buffer on some
error paths.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-12 01:09:21 +02:00
Jouni Malinen
a0b728b7e2 Simplify hostapd_config_fill() error reporting
There is no need for trying to count the number of errors in this
function since this is not a loop anymore and the return value will be
either 0 or 1.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-12 01:09:21 +02:00
Jouni Malinen
599f40db7d Remove extra indentation level from hostapd_config_fill()
The configuration file parsing routines were moved to a separate
function a while back, but left at the old indentation level to avoid
showing large diffs in the commit and to avoid conflicts with parallel
development in other branches. There is never a perfect time for this
type of changes, but we might as well finally get rid of that extra
indentation now with Hotspot 2.0 Rel 2 changes pulled in.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-12 01:09:15 +02:00
Ben Greear
cfc393a645 hostapd: Document interworking realm EAP Method types
Add link to the EAP type definitions document.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2014-03-11 19:27:55 +02:00
Simon Wunderlich
70ee1be248 hostapd: Add config option chanlist for DFS channels
Different channels allow different transmission power, at least in ETSI
countries. Also, ETSI requires a "channel plan" for DFS operation, and
channels should be randomly choosen from these channels.

Add a channel list configuration option for users to add channels
hostapd may pick from.

Signed-hostap: Simon Wunderlich <sw@simonwunderlich.de>
2014-03-11 18:59:40 +02:00
Jouni Malinen
09eef142ea Use internal FIPS 186-2 PRF if needed
Previously, EAP-SIM/AKA/AKA' did not work with number of crypto
libraries (GnuTLS, CryptoAPI, NSS) since the required FIPS 186-2 PRF
function was not implemented. This resulted in somewhat confusing error
messages since the placeholder functions were silently returning an
error. Fix this by using the internal implementation of FIP 186-2 PRF
(including internal SHA-1 implementation) with crypto libraries that do
not implement this in case EAP-SIM/AKA/AKA' is included in the build.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-11 16:44:22 +02:00
Jouni Malinen
4fb363c62b Fix error path handling on radius_accept_attr
This error path must not try to free the user entry since that entry was
already added to the BSS list and will be freed when BSS is freed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-10 00:44:26 +02:00
Jouni Malinen
8a57da7e28 RADIUS server: Add option for storing log information to SQLite DB
If eap_user_file is configured to point to an SQLite database, RADIUS
server code can use that database for log information.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-09 18:21:13 +02:00
Jouni Malinen
d0ee16edc8 Allow arbitrary RADIUS attributes to be added into Access-Accept
This extends the design already available for Access-Request packets to
the RADIUS server and Access-Accept messages. Each user entry can be
configured to add arbitrary RADIUS attributes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-08 11:35:08 +02:00
Jouni Malinen
49021c1cb6 Fix hostapd error path regression
Commit 354c903f8e added setting of
driver_ap_teardown on the hostapd exit path without taking into account
that this may also be called on an error path where the interface has
not been initialized. Fix the resulting NULL pointer dereference to
allow hostapd to exit cleanly in error case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-07 22:37:03 +02:00
Bartosz Markowski
905828fea4 hostapd: Fix vht_capab 'Maximum A-MPDU Length Exponent' handling
As per IEEE Std 802.11ac-2013, 'Maximum A-MPDU Length Exponent' field
value is in the range of 0 to 7. Previous implementation assumed EXP0 to
be the maximum length (bits 23, 24 and 25 set) what is incorrect.

This patch adds options to set it up within the 0 to 7 range.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
2014-03-06 00:09:37 +02:00
Moshe Benji
354c903f8e AP/GO interface teardown optimization
This commit adds an option to optimize AP teardown by leaving the
deletion of keys (including group keys) and stations to the driver.

This optimization option should be used if the driver supports stations
and keys removal when stopping an AP.

For example, the optimization option will always be used for cfg80211
drivers since cfg80211 shall always remove stations and keys when
stopping an AP (in order to support cases where the AP is disabled
without the knowledge of wpa_supplicant/hostapd).

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
2014-03-05 23:57:02 +02:00
Jouni Malinen
b61e70c4f3 HS 2.0R2: Add WFA server-only EAP-TLS server method
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
8d2a9921af HS 2.0R2: RADIUS server support to request Subscr Remediation
The new hostapd.conf parameter subscr_remediation_url can be used to
define the URL of the Subscription Remediation Server that will be added
in a WFA VSA to Access-Accept message if the SQLite user database
indicates that the user need subscription remediation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
ae6d15c722 HS 2.0R2 AP: Add OSU Providers list ANQP element
hostapd can now be configured to advertise OSU Providers with the
new osu_* confgiuration parameters.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
f7bd7a01a8 HS 2.0R2 AP: Add Icon Request and Icon binary File ANQP elements
hostapd can now be configured to provide access for icon files
(hs20_icon config file parameter) for OSU. The hs20_icon data contains
additional meta data about the icon that is not yet used, but it will be
needed for the OSU Providers list ANQP element.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
8e1146d9da HS 2.0R2 AP: Add support for deauthentication request
If the RADIUS server includes deauthentication request in Access-Accept,
send a WNM-Notification frame to the station after 4-way handshake and
disconnect the station after configurable timeout.

A new control interface command, WNM_DEAUTH_REQ, is added for testing
purposes to allow the notification frame to sent based on local request.
This case does not disconnect the station automatically, i.e., a
separate control interface command would be needed for that.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:24 +02:00
Jouni Malinen
a14896e8bb HS 2.0R2 AP: Add OSEN implementation
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:24 +02:00
Jouni Malinen
3fb17a9530 HS 2.0R2 AP: Add WNM-Notification Request for Subscription Remediation
Subscription remediation notification can now be sent from hostapd with:
hostapd_cli hs20_wnm_notif 02:00:00:00:00:00 http://example.com/foo/

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:24 +02:00
Jouni Malinen
d5d24784e6 HS 2.0R2 AP: Update HS 2.0 Indication element to Release 2
The HS 2.0 Indication element from hostapd now includes the release
number field and the new ANQP Domain ID field. This ID can be configured
with anqp_domain_id parameter in hostapd.conf.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:24 +02:00
Jouni Malinen
a5d75636f9 HS 2.0R2: Add common OSEN definitions
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:23 +02:00
Emanuel Taube
e2364d162a hostapd: Deauthenticate clients forbidden by maclist changes
After adding or removing a MAC address from a list, the
corresponding station was not deauthenticated as expected.

Signed-off-by: Emanuel Taube <emanuel.taube@gmail.com>
2014-02-25 16:18:48 +02:00
Emanuel Taube
1748f1da3d hostapd: Make it possible to remove addresses from maclists
It is already possible to add MAC addresses at runtime. This patch
allows also to remove some of them by using the prefix "-" in the
address file.

Signed-off-by: Emanuel Taube <emanuel.taube@gmail.com>
2014-02-25 16:10:29 +02:00
Chaitanya T K
3d7ad2f681 hostapd: Configure spectrum management capability
Add configuration of Spectrum Management subfield in the Capability
Information of Beacon, Probe Response, and Association Response frames.
Spectrum Management bit is set when directly requested by new
configuration option spectrum_mgmt_required=1 or when AP is running on
DFS channels. In the future, also TPC shall require this bit to be set.

Signed-hostap: Srinivasan <srinivasanb@posedge.com>
Signed-hostap: Chaitanya T K <chaitanyatk@posedge.com>
Signed-hostap: Marek Puzyniak <marek.puzyniak@tieto.com>
2014-02-25 00:54:59 +02:00
Srinivasan B
e0392f825d hostapd: Add Power Constraint element
Add Power Constraint information element to Beacon and Probe Response
frames when hostapd is configured on 5 GHz band and Country information
element is also added. According to IEEE Std 802.11-2012 a STA shall
determine a local maximum transmit power for the current channel based
on information derived from Country and Power Constraint elements.

In order to add Power Constraint element ieee80211d option need to be
enabled and new local_pwr_constraint config option need to be set to
unsigned value in units of decibels. For now this value is statically
configured but the future goal is to implement dynamic TPC algorithm
to control local power constraint.

Signed-hostap: Srinivasan <srinivasanb@posedge.com>
Signed-hostap: Chaitanya T K <chaitanyatk@posedge.com>
Signed-hostap: Marek Puzyniak <marek.puzyniak@tieto.com>
2014-02-24 23:51:23 +02:00
Jouni Malinen
ea449b5bfe tests: Add a module test integration to hwsim tests
CONFIG_MODULE_TESTS=y build option can now be used to build in module
tests into hostapd and wpa_supplicant binaries. These test cases will be
used to get better testing coverage for various details that are
difficult to test otherwise through the control interface control. A
single control interface command is used to executed these tests within
the hwsim test framework. This commit adds just the new mechanism, but no
module tests are yet integrated into this mechanism.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 13:08:08 +02:00
Roger Zanoni
848905b12a Avoid undefined references with CONFIG_WPA_TRACE_BFD=y
libdl, libiberty, and libzlib are dependencies for libbfd.

Signed-off-by: Roger Zanoni <roger.zanoni@openbossa.org>
2014-02-20 16:32:26 +02:00
Dmitry Shmidt
ac494fcce4 Android: Use external libnl 2.0 dynamic library
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-02-19 14:10:12 +02:00
Roger Zanoni
b7cac41254 Fix hostapd and wpa_supplicant build with binutils >= 2.24.x
Using binutils >= 2.24.x and setting
CONFIG_WPA_TRACE/CONFIG_WPA_TRACE_BDF causes both builds to fail with
"#error config.h must be included before this header" message.

Since version 2.24.x, the bfd header checks for PACKAGE and
PACKAGE_VERSION macros.

As suggested in http://sourceware.org/bugzilla/show_bug.cgi?id=14243
projects that use bfd and don't use autotools should define a PACKAGE
macro.

Signed-off-by: Roger Zanoni <roger.zanoni@openbossa.org>
2014-02-19 14:10:12 +02:00
Jouni Malinen
a1dd890a85 RADIUS: Add minimal accounting server support
This can be used to test RADIUS Accounting in hostapd.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 16:26:48 +02:00
Jouni Malinen
9aab81145a Fix nt_password_hash build
This needs librt on some systems for clock_gettime().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 11:49:40 +02:00
Helmut Schaa
d9dd86be1d hostapd: Enable IEEE 802.11w in defconfig
IEEE 802.11w is ratified since 2009 already, so this comment does not
seem to be valid anymore.

Signed-hostap: Helmut Schaa <helmut.schaa@googlemail.com>
2014-02-14 19:21:42 +02:00
Jouni Malinen
7ae7a84eef NFC: Workaround nfcpy message debug exception
The current nfcpy version does not support new WSC connection handover
message format and the handover server fails to process the request due
to a debug print. As a temporary workaround, override
HandoverServer::_process_request() with a version that avoids pretty()
print of the handover messages. This can be removed once nfcpy has been
updated to support the new format.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-13 16:37:43 +02:00
Eytan Lifshitz
1e2ffc608b Fix theoretical NULL dereference in debug printf
In hostapd_logger_cb(), module_str is checked for NULL (on a path that
does not get executed in practice), and then possibly dereferenced in
snprintf() anyway.

Signed-hostap: Eytan Lifshitz <eytan.lifshitz@intel.com>
2014-02-13 15:58:15 +02:00
Jouni Malinen
d6bfaaac69 NFC: Add summary and success file options for nfcpy scripts
These can be used to get updates on NFC operation status and success for
external programs.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-12 16:44:05 +02:00
Jouni Malinen
b0d18bc2a1 WPS: Make UUID-from-MAC Address easily available
"hostapd -u<MAC Address>" can now be used to display the UUID that will
be generated based on a MAC Address (i.e., when hostapd configuration
does not set a specific UUID).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-11 15:44:13 +02:00
Jouni Malinen
44f967c729 Update ChangeLog files to match current implementation
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-04 13:23:35 +02:00
Jouni Malinen
12288d848c WPS NFC: Protect nfcpy pretty print calls against exceptions
nfcpy does not yet support all the new message formats, so some of the
pretty() calls can result in exceptions.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 22:08:14 +02:00
Jouni Malinen
6202500f6f WPS NFC: Logging level configuration to wps-nfc.py and wps-ap-nfc.py
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 22:08:13 +02:00
Jouni Malinen
1f1b5b31d7 WPS NFC: Clean up nfcpy script no-wait operations
This allows the scripts to terminate at proper point with --no-wait.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 22:08:13 +02:00
Jouni Malinen
ab1db08c05 WPS NFC: Use argparse in the nfcpy scripts
This cleans up command line parsing and simplifies the commands.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 22:08:13 +02:00
Jouni Malinen
6f8fa6e552 WPS NFC: Update wps-nfc.py and wps-ap-nfc.py to use new nfcpy API
This moves many of the peer discovery operations into the core nfcpy.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 22:08:13 +02:00
Jouni Malinen
91226e0d12 WPS: Add testing option to corrupt public key hash
If CONFIG_WPS_TESTING=y is enabled in build configuration, the new
wps_corrupt_pkhash parameter (similar to wps_testing_dummy_cred) can be
used to request public key hash to be corrupted in all generated OOB
Device Password attributes. This can be used for testing purposes to
validate public key hash validation steps.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:44:31 +02:00
Jouni Malinen
3189ca055d WPS NFC: Add AP mode connection handover report
The new NFC connection handover design requires the AP/Registrar to
process the connection handover request message received from the
Enrollee. Add control interface commands for handling this.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Dmitry Shmidt
b19ef32bf9 Android: Remove hostapd dump_file functionality
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-01-14 17:08:04 +02:00
Jouni Malinen
08081ad8ef hostapd: Skip full AP configuration validation on SET command
It is possible for the configuration to be temporarily invalid when
adding a new AP through SET commands followed by ENABLE. Avoid this
issue by using less strict validation on SET commands and perform full
configuration validation only on ENABLE. Use cases with configuration
file maintain their previous behavior, i.e., full validation after the
file has been read.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 20:23:56 +02:00
Ben Greear
3043b4f455 nl80211: Document how to configure for libnl 2.0 and 3.2
Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com>

Signed-hostap: Ben Greear <greearb@candelatech.com>
2014-01-07 15:35:14 +02:00
Jouni Malinen
090b8e3d14 Update copyright notices for the new year 2014
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:12 +02:00