Commit graph

2744 commits

Author SHA1 Message Date
Paul Stewart
5bbf9f1086 Add DBus state change notification for AuthMode property
Signed-off-by: Paul Stewart <pstew@google.com>
2011-03-15 13:54:59 +02:00
Paul Stewart
ba6f267f64 dbus: Add D-Bus method for current authentication mode
Chooses between EAP and non-EAP authentication modes and
uses the appropriate method to retrieve the name.

Signed-off-by: Paul Stewart <pstew@google.com>
2011-03-15 13:53:56 +02:00
Paul Stewart
cf83fb0b5b wpa_supplicant: Add wpa_supplicant_get_eap_mode method
Signed-off-by: Paul Stewart <pstew@google.com>
2011-03-15 13:53:08 +02:00
Paul Stewart
c83e2e1c45 eapol_supp: Request EAP method from EAP state machine
Signed-off-by: Paul Stewart <pstew@google.com>
2011-03-15 13:49:26 +02:00
Paul Stewart
8813e4d57e eap_peer: Add method to return current method name
If there is an active EAP method, return its name.

Signed-off-by: Paul Stewart <pstew@google.com>
2011-03-15 13:47:33 +02:00
Jouni Malinen
e17a2477db nl80211: Extend bridge add/del operations for secondary BSSes
Previously, only the main interface was added to a bridge. Extend this
to apply to all configured BSSes.
2011-03-15 13:02:49 +02:00
Jouni Malinen
6ca4da6518 wlantest: Use source address of TDLS Setup Confirm failure for matching
This is needed to be able to find the correct TDLS entry for the
frame regardless of whether a FromDS or ToDS frame is being processed.
2011-03-14 21:35:40 +02:00
Jouni Malinen
39c147261e wlantest: Fix source address for FromDS frames 2011-03-14 21:35:14 +02:00
Ken Zhu
7099861e4e atheros: Fix default TX key index setting for WEP 2011-03-11 17:55:43 +02:00
Jouni Malinen
61fbd3df04 Fix couple of typos in comments 2011-03-11 12:12:36 +02:00
Chao-Wen Yang
3152ff421e WPS: Indicate PBC session overlap in wps_pbc return value
Use a specific return value, WPS-PBC-OVERLAP, to indicate a reason
for rejecting a wps_pbc command in wpa_supplicant AP mode if the
PBC mode cannot be started due to PBC session overlap having been
detected during monitor time.
2011-03-10 18:59:51 +02:00
Jouni Malinen
3cc002ff97 WPS: Ignore PBC session overlap if a specific Enrollee is selected
This allows the user to complete WPS provisioning using PBC by
selected a specific Enrollee even if there are other Enrollees
in active PBC mode at the same time. The other Enrollees will be
rejected should they try to connect at the same time.
2011-03-10 18:51:00 +02:00
Jouni Malinen
ab45223b1a wpa_supplicant AP: Copy generated UUID for AP configuration
If the wpa_supplicant configuration file does not specify an UUID,
we need to copy the generated UUID, not the all zeros buffer
reserved for the configured UUID.
2011-03-10 18:40:16 +02:00
Jouni Malinen
80e75578c4 WPS: Show the received UUID-E from Probe Request in debug log
This makes it easier to debug PBC session overlap issues.
2011-03-10 18:38:16 +02:00
Jouni Malinen
ca29141c83 WPS: Copy UUID from the first interface
Instead of generating a different UUID for each interface, use the
same UUID that was either configured of generated for the first
interface. This avoids potential issues with PBC session overlap
detection should multiple interfaces end up running a PBC scan
at the same time which may happen at least in some P2P use cases.
2011-03-10 18:36:07 +02:00
Jouni Malinen
b0dc4155c3 WPS: Use only UUID-E in PBC session overlap detection on Registrar
Ignore possible mismatches in the source address of the frame and only
use UUID-E to check whether a Probe Request or M1 is from the same
Enrollee when figuring out whether there is PBC session overlap. This
is needed to avoid potential issues with Enrollee devices that may have
multiple interfaces indicating active PBC state.
2011-03-10 18:33:53 +02:00
Jouni Malinen
b8fb017272 TDLS: Add tdls_testing 0x400 for ignoring AP prohibit TDLS 2011-03-06 14:54:52 +02:00
Jouni Malinen
52c9e6f3f5 TDLS: Do not allow setup to be started if AP prohibits TDLS 2011-03-06 14:54:49 +02:00
Jouni Malinen
fb12d186b6 TDLS: Add tdls_testing 0x200 for declining TDLS Setup Response 2011-03-06 14:54:47 +02:00
Jouni Malinen
94377fbc52 TDLS: Allow wpa_cli tdls_setup to start renegotiation
If there is already a link the requested peer, request start of
renegotiation instead of completely new link. This seems to be needed
to allow some driver to accept the trigger for a new negotiation.
2011-03-06 14:54:44 +02:00
Jouni Malinen
ad79dba127 TDLS: Add testing mode for disabling TPK expiration
tdls_testing 0x104 can now be used to disable expiration of TPK
(0x100) and to use a short lifetime when initiating link (0x4).
2011-03-06 14:54:41 +02:00
Jouni Malinen
0c4268eb27 TDLS: Add testing code for concurrent initiation
tdls_testing 0x80 can now be used to request wpa_supplicant to send
a TDLS Setup Request frame (i.e., try to initiate TDLS setup)
whenever a TDLS Setup Request frame has been received from a peer.
2011-03-06 14:54:39 +02:00
Jouni Malinen
43291b683c TDLS: Fix higher/lower MAC address check for concurrent init
The logic here was reversed: the STA with lower MAC address is the
one that continues as the initiator.
2011-03-06 14:54:36 +02:00
Jouni Malinen
a8b2c2d657 TDLS: Tear down old link when receiving TDLS Setup Request 2011-03-06 14:54:34 +02:00
Jouni Malinen
2a469a6b56 TDLS: Add tdls_testing flag (bit 6) for testing long TPK lifetime 2011-03-06 14:54:32 +02:00
Jouni Malinen
1c0b2ad1ce TDLS: Use more thorough validation of TPK handshake 2011-03-06 14:54:29 +02:00
Jouni Malinen
f0bfbe2a6c TDLS: Replace os_memset() of all peer data with safer approach
Blindly clearing all struct wpa_tdls_peer members is a risky
operation since it could easily clear pointers to allocated
memory, etc. information that really should not be removed.
Instead of hoping that new code gets added here to restore
the important variables, reverse the approach and only clear
structure members one by one when needed.
2011-03-06 14:54:27 +02:00
Jouni Malinen
c61f3e5544 TDLS: Remove unnecessary storing of Link ID IE in peer data 2011-03-06 14:54:24 +02:00
Jouni Malinen
3f466ec9e3 TDLS: Fix terminology to match with IEEE 802.11z 2011-03-06 14:54:22 +02:00
Jouni Malinen
a4c3e4b194 TDLS: Move TPK M1 sending to a separate function
Now all there TPK handshake messages are sent in similar functions
and are easier to find from the source code.
2011-03-06 14:54:20 +02:00
Jouni Malinen
2e1d335e44 TDLS: Allow unencrypted network negotiation through wpa_supplicant
This allows the same code path to be used for both protected and
unprotected configurations to limit need for duplicated code in
both the driver and wpa_supplicant.
2011-03-06 14:54:18 +02:00
Jouni Malinen
9fe6e4b4db TDLS: Clean up and fix Key Lifetime processing
This adds code for validating that the same Key Lifetime is used
throughout TPK handshake and enables TPK lifetime expiration and
renewal/teardown. These part seem to be working, but the actual
handling of TDLS Setup Confirm and renewal are not fully
functional yet.
2011-03-06 14:54:16 +02:00
Jouni Malinen
6b192bc346 TDLS: Add new testing modes for TPK lifetime testing
tdls_testing bits:
bit 3 = use short TPK lifetime (301 seconds)
bit 4 = use wrong TPK lifetime in TDLS Setup Response
bit 5 = use wrong TPK lifetime in TDLS Setup Confirm
2011-03-06 14:54:01 +02:00
Jouni Malinen
40cf22e6ff TDLS: Clear peer entries on association/disassociation
Since the TDLS links are allowed only to STAs that are in the same
BSS with us, clear all peer data whenever the BSS may have changed.
2011-03-06 14:53:58 +02:00
Jouni Malinen
5b0e6ece54 TDLS: Add a special testing feature for changing TDLS behavior
These special test cases can be configured at run time with "wpa_cli
tdls_testing <value>" where <value> is an integer (either as a decimal
or as a hex value with 0x prefix) bitmap of special features with
following bits available at this point:
bit 0 = long frame (add dummy subelement to make FTIE very long)
bit 1 = use alternative RSN IE (different RSN capab value and no extra
replay counters)
bit 2 = send incorrect BSSID in Link Identifier of TDLS Setup Request
(e.g., 1 = long FTIE, 2 = different RSN IE, 3 = both of those)

This is disabled by default and can be enabled for the build by
adding the following line to .config:
CFLAGS += -DCONFIG_TDLS_TESTING
2011-03-06 14:53:54 +02:00
Ganesh Prasadh
281ff0aa76 TDLS: Add initial support for TDLS (IEEE Std 802.11z-2010) 2011-03-06 14:53:49 +02:00
Jouni Malinen
23ab8e863f Clear PeerKey pointer on deinit 2011-03-06 14:52:52 +02:00
Shan Palanisamy
a4dc6e1934 atheros: Add support for setting RSN/WPS IEs in Beacon/Probe Resp 2011-03-06 14:31:59 +02:00
Shan Palanisamy
39b08b5fc0 Indicate assoc vs. reassoc in association event
This allows driver wrappers to indicate whether the association was
done using Association Request/Response or with Reassociation
Request/Response frames.
2011-03-06 14:31:46 +02:00
Shan Palanisamy
d7956add9c FT: Make FT-over-DS configurable (hostapd.conf ft_over_ds=0/1) 2011-03-06 14:31:42 +02:00
Jouni Malinen
c0647147c1 Add defines for Valgrind client requests
CFLAGS += -DCONFIG_VALGRIND can now be used to enable support for
Valgrind client requests to help in removing some non-issues from
Valgrind reports. This is mainly aimed at allowing unknown ioctl
results to be marked as defined data.
2011-03-06 14:31:26 +02:00
Jouni Malinen
0fa0ad4e17 eloop: Fix integer overflow in long timeouts
If the os_time_t variable used for the expiration time (seconds)
overflows when the registered timeout value is being added,
assume that the event would happen after an infinite time, i.e.,
would not really happen in practice. This fixes issues with
long key timeouts getting converted to immediate expiration due
to the overflow.
2011-03-06 14:31:20 +02:00
Dmitry Shmidt
9fc6aa9f95 Add Android make files for hostapd and wpa_supplicant 2011-02-27 19:19:43 +02:00
Iain Hibbert
8ce58ceb25 Avoid preprocessor directives in macro arguments
os_snprintf() can be a preprocessor macro and according to
C99 (6.10.3 clause 11) the results of having preprocessor directives
inside the macro arguments is undefined.
2011-02-27 18:59:26 +02:00
Jouni Malinen
73304dbf65 Allow client control socket location to be overridden
Build options can now be used to replace the location of client
sockets for UNIX domain socket control interface:

CFLAGS += -DCONFIG_CTRL_IFACE_CLIENT_DIR=\"/tmp\"
CFLAGS += -DCONFIG_CTRL_IFACE_CLIENT_PREFIX=\"wpa_ctrl_\"
2011-02-27 18:35:33 +02:00
Dmitry Shmidt
b3f3865e0e Use Android reserved namespace for control interface
On Android, use a special reserved namespace for the UNIX domain
socket.
2011-02-27 18:19:17 +02:00
Dmitry Shmidt
1480633f96 Use longer timeout in wpa_ctrl_request()
Wait longer for control interface response from wpa_supplicant to
avoid issues with some drivers that have long blocking operations.
2011-02-27 17:08:15 +02:00
Dmitry Shmidt
36fde1e79c Make wpa_ctrl_close() handle unopened connection 2011-02-27 17:07:07 +02:00
Masashi Honma
28878f8b0e bsd: Use correct size for routing socket
The buffer size for routing socket is fixed to 2048.
This patch fix it to obtain the size from OS.

This patch worked on x86 platform with NetBSD 5.0.2.
2011-02-27 14:01:39 +02:00
Jouni Malinen
0ed3f41a5b One more year update for copyright notices 2011-02-27 12:56:12 +02:00