Commit graph

2109 commits

Author SHA1 Message Date
Jonathan Afek
5b45f478c2 tests/remote: Fix style and typos
Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-28 16:34:02 +03:00
Jonathan Afek
a73cdd69c7 tests/remote: Extend get_monitor_params() to support P2P interfaces
This function is used for remote tests when a monitor interface is
needed on the channel on which the AP operates. This change enables us
to also query P2P interfaces for the channel information to use for
monitor interfaces.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-28 16:33:56 +03:00
Jonathan Afek
04fd8ea1ba tests/remote: Use a function to add a log file to a remote host
Instead of accessing the logs list member of the remote host directly,
use a function to add logs to the remote host to be collected after the
test. This enables us to later have different implementation of remote
hosts or logs collection without requiring to have this list as the
implementation.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-28 16:33:48 +03:00
Jonathan Afek
e2f3f0232f tests: Use 10 retries for over-the-air broadcast connectivity
The regular hwsim tests use both unicast and broadcast frames to test
the connectivity between 2 interfaces. For real hardware (remote hwsim
tests) the broadcast frames will sometimes not be seen by all connected
stations since they can be in low power mode during DTIM or because
broadcast frames are not ACKed. Use 10 retries for broadcast
connectivity tests for real hardware so that the test will pass if we
successfully received at least one of them.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-28 16:33:41 +03:00
Jouni Malinen
90b4c73fdf tests: Fix ap_wpa2_eap_fast_prf_oom with the updated PRF implementation
This is needed to work with the tls_openssl.c changes that renamed the
function that is used for deriving the EAP-FAST keys.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-23 20:40:14 +03:00
Jouni Malinen
7f03ecc884 tests: Scan failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-23 18:43:58 +03:00
Jouni Malinen
a68a749322 tests: P2P group formation using P2PS method without specifying PIN
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-20 23:37:51 +03:00
Jouni Malinen
f260ce4be8 tests: wpa_supplicant AP mode - WPS disabled
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-14 19:43:30 +03:00
Jouni Malinen
50d06776c6 tests: Fix WEXT testing
Commit afb2e8b891 ('tests: Store P2P
Device ifname in class WpaSupplicant') did not take into account the
possibility of capa.flags not existing in get_driver_status() and broke
WEXT test cases. Fix this by checking that capa.flags is present before
looking at its value.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-14 18:59:47 +03:00
Janusz Dziedzic
a185e9b10b tests/remote: Add hwsim wrapper
This allow to run hwsim test cases.

duts go to apdev while refs go to dev

For now I tested:
./run-tests.py -d hwsim0 -r hwsim1 -h ap_open -h dfs
./run-tests.py -r hwsim0 -r hwsim1 -h ibss_open -v
./run-tests.py -r hwsim0 -r hwsim1 -r hwsim2 -d hwsim3 -d hwsim4 -h ap_vht80 -v
./run-tests.py -r hwsim0 -r hwsim1 -r hwsim2 -d hwsim3 -d hwsim4 -h all -k ap -k vht

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-05-14 17:56:37 +03:00
Janusz Dziedzic
ff9bb8a210 tests/remote: Add test_example.py
This is simple example how to write a simple test case.

modprobe mac80211_hwsim radios=4
run example:
./run-tests.py -d hwsim0 -r hwsim1 -t example

run example with monitors:
./run-tests.py -d hwsim0 -r hwsim1 -t example -m all -m hwsim2

run example with trace record:
./run-tests.py -d hwsim0 -r hwsim1 -t example -T

run example with trace and perf:
./run-tests.py -d hwsim0 -r hwsim1 -t example -T -P

restart hw before test case run:
./run-tests.py -d hwsim0 -r hwsim1 -t example -R

run example verbose
./run-tests.py -d hwsim0 -r hwsim1 -t example -v

For perf/trace you need to write own hw specyfic scripts:
trace_start.sh, trace_stop.sh
perf_start.sh, perf_stop.sh

In any case you will find logs in the logs/current/ directory.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-05-14 17:56:37 +03:00
Janusz Dziedzic
a73fa13be2 tests/remote: Add utils file
Add rutils.py for remote tests.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-05-14 17:56:37 +03:00
Janusz Dziedzic
ede4719718 tests/remote: Add monitor.py
Add monitor support. This supports monitors added to the current
interfaces. This also support standalone monitor with multi interfaces
support. This allows to get logs from different channels at the same
time to one pcap file.

Example of t3-monitor added to config.py file.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-05-14 17:56:37 +03:00
Janusz Dziedzic
5865186e31 tests: Add remote directory to tests
Add tests/remote directory and files:
config.py - handle devices/setup_params table
run-tests.py - run test cases
test_devices.py - run basic configuration tests

You can add own configuration file, by default this is cfg.py, and put
there devices and setup_params definition in format you can find in
config.py file. You can use -c option or just create cfg.py file.

Print available devices/test_cases:
./run-tests.py

Check devices (ssh connection, authorized_keys, interfaces):
./run-test.py -t devices

Run sanity tests (test_sanity_*):
./run-test.py -d <dut_name> -t sanity

Run all tests:
./run-tests.py -d <dut_name> -t all

Run test_A and test_B:
./run-tests.py -d <dut_name> -t "test_A, test_B"

Set reference device, and run sanity tests:
./run-tests.py -d <dut_name> -r <ref_name> -t sanity

Multiple duts/refs/monitors could be setup:
e.g.
./run-tests.py -d <dut_name> -r <ref1_name> -r <ref2_name> -t sanity

Monitor could be set like this:
./run-tests.py -d <dut_name> -t sanity -m all -m <standalone_monitor>

You can also add filters to tests you would like to run
./run-tests.py -d <dut_name> -t all -k wep -k g_only
./run-tests.py -d <dut_name> -t all -k VHT80

./run-test.py doesn't start/terminate wpa_supplicant or hostpad,
test cases are resposible for that, while we don't know test
case requirements.

Restart (-R) trace (-T) and perf (-P) options available.
This request trace/perf logs from the hosts (if possible).

As parameters each test case get:
- devices - table of available devices
- setup_params
- duts - names of DUTs should be tested
- refs - names of reference devices should be used
- monitors - names of monitors list

Each test could return append_text.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-05-14 17:56:35 +03:00
Janusz Dziedzic
6a003eb2a6 tests: remotehost.py use join
Use join instead of for.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-05-14 17:19:59 +03:00
Jouni Malinen
df49b90e35 tests: Secure mesh and the first plink Open dropped
This is a regression test case to verify that MTK is calculated properly
also in this unexpected sequence.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-13 20:54:51 +03:00
Jouni Malinen
9524e7e5a4 tests: Open network connection with pmf=2
This verifies that pmf=2 is ignored for a non-RSN network while a
network profile specific ieee80211w=2 is enforced.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-06 00:35:08 +03:00
Jouni Malinen
2dc754e170 tests: wpa_supplicant config file parsing of arbitrary global values
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-02 11:08:25 +03:00
Jouni Malinen
596a3fef83 tests: Use \t instead of \n in discovery_ctrl_char_in_devname
This is needed to allow the SET command to be modified to reject newline
characters.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-02 11:08:25 +03:00
Jouni Malinen
8721af54e4 tests: wpa_supplicant config parsing of arbitrary cred values
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-02 11:08:25 +03:00
Jouni Malinen
5594df44c7 tests: wpa_supplicant config file writing with arbitrary PSK value
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-02 11:08:25 +03:00
Jouni Malinen
f529c0d908 tests: wpa_supplicant config file parsing/writing with WPS
This verifies that a WPA2PSK passphrase with control characters gets
rejected in a WPS Credential and that control characters in SSID get
written as a hexdump.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-02 11:08:25 +03:00
Jouni Malinen
0663ae22ff tests: Do not use tabs for indentation
Be more consistent with indentation (always uses spaces in Python
files).

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-25 00:19:40 +03:00
Andrei Otcheretianski
a274b1bcbb tests: Test configuration propagation to group interface
When a dedicated P2P Device interface is used, its configuration should
be cloned to the group interface. Add a test that covers this both when
a separate group interface is used and not.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2016-04-25 00:15:35 +03:00
Andrei Otcheretianski
597cbc0075 tests: Fix persistent_group_peer_dropped tests
Use the global control interface to remove P2P network blocks, to
support cases when a dedicated P2P Device interface is used.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2016-04-25 00:06:20 +03:00
Andrei Otcheretianski
aa713e71e9 tests: Don't use proxy in urllib.urlopen()
Some environments define default system wide HTTP proxy. Using default
system configuration may result in a failure to open some HTTP URLs. Fix
this by ensuring that no proxies are used.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2016-04-25 00:05:34 +03:00
Andrei Otcheretianski
fc30cc10ac tests: Use global control interface for P2P configurations
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2016-04-25 00:03:40 +03:00
Ilan Peer
9c01d6a965 tests: Use global control interface to set p2p_no_group_iface
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-04-24 23:47:29 +03:00
Ilan Peer
463b7f3511 tests: Parse group results in a couple of p2p_channel tests
In p2p_channel_vht80_autogo and p2p_channel_vht80p80_autogo, parse the
P2P-GROUP-STARTED event prior to calling the group_request() method, as
otherwise the group ifname is not set.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-04-24 23:45:57 +03:00
Avraham Stern
af93c61450 tests: Modify use of GET command to support P2P Device interface
Support configurations that use a dedicated P2P Device interface by
using the global control interface and specifying the interface name for
the GET commands fetching the ip_addr_go parameter.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-04-24 23:45:19 +03:00
Avraham Stern
5e65346ade tests: persistent_group_profile_add to support P2P Device interface
Modify the persistent_group_profile_add test to support configurations
that use a dedicated P2P Device interface by sending the ADD_NETWORK and
SET_NETWORK commands on the global control interface and specifying the
P2P Device interface name.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-04-24 23:45:16 +03:00
Avraham Stern
afb2e8b891 tests: Store P2P Device ifname in class WpaSupplicant
Add an attribute to class WpaSupplicant with the name of the
P2P Device interface. If a separate interface is not used for
P2P Device, this attribute will hold the name of the only used
interface (with functions also as the P2P Device management
interface).

This attribute will be used to direct P2P related commands to the
P2P Device interface, which is needed for configurations that use
a separate interface for the P2P Device.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-04-24 23:24:06 +03:00
Avraham Stern
d43fc7c6b0 tests: Modify p2p_msg_long_ssid to support P2P Device interface
Waiting for the P2P-DEVICE-FOUND event should be done on the global
control interface to support configurations that use a dedicated P2P
Device interface.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-04-24 23:13:14 +03:00
Avraham Stern
a7efe6c386 tests: Modify autogo_scan to support P2P Device interface
Support configurations that use a dedicated P2P Device interface by
sending the P2P_CONNECT command on the global control interface.

In addition, when a dedicated P2P Device interface is used, there is no
need to manually respond to the Provision Discovery Request since the
request is processed by the P2P Device interface and this interface was
not set for external RX management frames handling.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-04-24 23:11:13 +03:00
Ilan Peer
12de787527 tests: Fix error message in test_p2ps_connect_p2ps_method_4()
This fixes commit 2f0f69a9ec ('tests: Use
p2ps_provision() and p2ps_connect_pd() in p2ps_connect_p2ps_method()').

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-04-24 23:00:44 +03:00
Ilan Peer
fed0a9f519 tests: Add couple of roam failure tests
1. Fail roaming to an AP which exceeded its number of allowed stations.
2. Fail roaming due to passphrase mismatch.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-04-24 22:56:39 +03:00
Jouni Malinen
b3a27c8a30 tests: Remove unused eap_connect import
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-24 20:16:30 +03:00
Jouni Malinen
5a766accee tests: Convert Host() class to use list of arguments instead of string
It is better to use a list of command line arguments for the local
execution case and convert that to a space-separated string for the
remote case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-24 20:16:30 +03:00
Janusz Dziedzic
2147b3a7f8 tests: Print traceback if test fails
This is useful in case we hit a problem in test code.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 20:16:30 +03:00
Janusz Dziedzic
5148b392ab tests: Use hapd from hostapd.add_bss()
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 20:16:30 +03:00
Janusz Dziedzic
6f334bf7a0 tests: Use hapd from hostapd.add_ap()
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 20:16:29 +03:00
Janusz Dziedzic
4063590525 tests: Use hapd from hostapd.add_ap() in start_ap_er()
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 20:16:29 +03:00
Janusz Dziedzic
63e6e62f23 tests: Use hapd from hostapd.add_ap() in TDLS
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 20:16:29 +03:00
Janusz Dziedzic
c8ef2f6ef4 tests: Pass apdev to HostapdGlobal() in ap_add_with_driver
This is needed for running the test with a remote host.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 20:16:29 +03:00
Janusz Dziedzic
3b3e26875a tests: Use hapd from hostapd.add_ap() in eap_connect()
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 20:06:17 +03:00
Janusz Dziedzic
50e49cd240 tests: Use hapd from hostapd.add_iface()
Since add_iface() now returns the correct hapd, just use it.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 19:26:25 +03:00
Janusz Dziedzic
dc6342de92 tests: Pass apdev to HostapdGlobal()
This can be used to work with remote hosts.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 19:26:11 +03:00
Janusz Dziedzic
1728a2e73c tests: Replace HostapdGlobal() + remove() with hostapd.remove_bss()
This can be used to work with remote hosts.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 19:25:12 +03:00
Janusz Dziedzic
b29c46beb9 tests: Use hostapd.add_ap() instead of HostapdGlobal() (DFS)
This makes the DFS test cases that use start_dfs_ap() more usable for
testing with remote hosts.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 19:25:06 +03:00
Janusz Dziedzic
01703a9f2f tests: Use hostapd.remove_bss() instead of HostapdGlobal() (WPS)
This makes ap_wps_twice more usable for testing with remote hosts.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 19:24:55 +03:00