Commit graph

25 commits

Author SHA1 Message Date
Jouni Malinen
56a04ae1a1 wlantest: Support TK list for Management frame decryption
Use the TKs from the PTK file (-T command line argument) to try to
decrypt encrypted Management frames if no BSS/STA key can be found based
on addresses.

Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-07 11:37:58 +02:00
Jouni Malinen
420989085d wlantest: Ethernet interface capture
Allow option (command line argument -e) to capture Ethernet headers
instead of IEEE 802.11 so that wlantest can be used as a replacement for
tcpdump/dumpcap for capturing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-27 23:16:45 +02:00
Jouni Malinen
6c29d95a90 wlantest: Support variable length PMK
This is needed to be able to handle key derivation for FILS
authentication.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-09-05 19:05:15 +03:00
Jouni Malinen
f58afccddd wlantest: Add initial support for FT-EAP decryption
Add second half of MSK as XXKey for FT-EAP.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-26 21:13:17 +03:00
Jouni Malinen
e929eb39d6 wlantest: Add -N command line argument to remove write buffering
This makes it easier to do live parsing of captured pcap files from
wlantest without having to rename and restart the capture file. Packet
writes are flushed to disk after each packet if -N is included in the
command line.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 00:10:53 +02:00
Jouni Malinen
98cd3d1c3b Preparations for variable length KCK and KEK
This modifies struct wpa_ptk to allow the length of KCK and KEK to be
stored. This is needed to allow longer keys to be used, e.g., with
Suite B 192-bit level.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:26:49 +02:00
Jouni Malinen
0187c41d88 Declare wpa_debug_* variables in src/utils/wpa_debug.h
These were somewhat more hidden to avoid direct use, but there are now
numerous places where these are needed and more justification to make
the extern int declarations available from wpa_debug.h. In addition,
this avoids some warnings from sparse.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:29:52 +02:00
Jouni Malinen
a0530dff5b wlantest: Allow additional PTKs to be specified from a file
A text file with a hexdump of PTK (KCK|KEK=TK with 48 octets for CCMP or
64 octets for TKIP or alternative 16 or 32 octet TK for CCMP/TKIP) can
now be read from a file specified with the -T command line argument. If
the current known PTK fails to decrypt a frame (or if no current PTK is
known) all listed PTKs are iterated to see if any of them matches.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 23:09:38 +02:00
Jouni Malinen
de8bb171f6 wlantest: Add support for debug log timestamps
The new command line argument -t can now be used to request wlantest to
include a timestamp in the log entries.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 21:45:32 +02:00
Jouni Malinen
d33fef57a4 wlantest: Add support for log output into a file
This allows wlantest debug log output to be directed to a file so that
RELOG command can be used to rotate files more easily than stdout.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 21:40:17 +02:00
Jouni Malinen
c99a721e5b wlantest: Add RELOG command to reopen log/capture files
This can be used similarly to the wpa_supplicant RELOG command to
rotate log and capture files.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 21:39:22 +02:00
Jouni Malinen
ba2beacc97 wlantest: Add support for writing pcapng files
The new -n<file> command line argument can be used to request wlantest
to write all read or captured frames into a pcapng file. This is similar
to the -w argument, but with pcapng allowing per-frame comments to be
embedded in the file.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-26 20:58:42 +03:00
Jouni Malinen
2531517600 wlantest: Add -F option for assuming FCS is included
When using DLT_IEEE802_11 datalink type in a pcap file, wlantest can now
be instructed to assume there is an FCS included in the frame by adding
the new -F command line argument. This will make wlantest validate the
FCS and strip it from the frame before processing.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-01-17 12:55:30 +02:00
Jouni Malinen
0f3d578efc Remove the GPL notification from files contributed by Jouni Malinen
Remove the GPL notification text from the files that were
initially contributed by myself.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-11 19:39:36 +02:00
Jouni Malinen
219fd441fd wlantest: Allow MSK/PMK list to be read from a text file
A text file with MSK/PMK entries (one key per line in hexdump format)
can be read into wlantest (-f<path to file>) to initialize list of
known PMKs.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-09 00:12:27 +02:00
Jouni Malinen
9a994178f1 wlantest: Add command for adding WEP keys during run time 2011-01-28 13:33:21 +02:00
Jouni Malinen
2e479416d1 wlantest: Add support for decrypting WEP frames 2011-01-14 17:43:17 +02:00
Jouni Malinen
d356bd630b wlantest: Add flush command for dropping all BSS data 2010-11-18 17:36:08 +02:00
Jouni Malinen
644fb8c8a0 wlantest: Add control interface and wlantest_cli
This can be used to manage wlantest operation during run time.
2010-11-13 18:38:19 +02:00
Jouni Malinen
64f45d070b wlantest: Add option for writing a PCAP dump file
The output file includes all the capture (or read from wireless PCAP
file) frames in their original contents and another copy of each
frame that is decrypted in wlantest (including EAPOL-Key Key Data
field).
2010-11-12 01:00:31 +02:00
Jouni Malinen
d06df64d14 wlantest: Derive PMK from RADIUS exchange
Decrypt MPPE keys and derive PMK from RADIUS exchange if RADIUS
shared secret is known. Use the derived PMK when trying to derive
PTK during 4-Way Handshake.
2010-11-07 23:29:02 +02:00
Jouni Malinen
3215df77ee wlantest: Add capturing and parsing of RADIUS messages
Another interface (-I) or pcap file (-R) can now be specified as a
source of RADIUS packets. These packets are now parsed, but the
MSK is not yet derived for PMK use.
2010-11-07 23:29:02 +02:00
Jouni Malinen
53650bcab4 wlantest: Add PTK derivation based on passphrases
Allow pre-configuration of passphrases (-p<passphrase>) to provide
enough information for wlantest to be able to derive PMK for each
BSS and PTK for each STA going through 4-Way Handshake (at least
message 2 and 3 needs to be received).
2010-11-07 23:29:01 +02:00
Jouni Malinen
d84d389351 wlantest: Maintain table of BSS information
Whenever a Beacon or Probe Response frame is observed, add or update
a BSS entry to maintain current information about the active BSSes.
2010-11-07 23:29:00 +02:00
Jouni Malinen
a149fcc77d wlantest: Add preliminary version of IEEE 802.11 protocol testing tool
This tool can be used to capture IEEE 802.11 frames either from a
monitor interface for realtime capturing or from pcap files for
offline analysis. This version is only adding basic infrastructure for
going through the frames and parsing their headers.
2010-11-07 23:29:00 +02:00