Commit graph

377 commits

Author SHA1 Message Date
Kyeyoon Park
ec8f36afca AP: Add support for BSS load element (STA Count, Channel Utilization)
The new "bss_load_update_period" parameter can be used to configure
hostapd to advertise its BSS Load element in Beacon and Probe Response
frames. This parameter is in the units of BUs (Beacon Units).

When enabled, the STA Count and the Channel Utilization value will be
updated periodically in the BSS Load element. The AAC is set to 0 sinze
explicit admission control is not supported. Channel Utilization is
calculated based on the channel survey information from the driver and
as such, requires a driver that supports providing that information for
the current operating channel.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-21 23:25:48 +03:00
Bob Copeland
6c1664f605 nl80211: Add new commands to support mesh interfaces
Create init_mesh, mesh_join, and mesh_leave actions to kernel.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Bob Copeland
f7072600be Implement RFC 5297 AES-SIV
Add an implementation of Synthetic Initialization Vector (SIV)
Authenticated Encryption Using the Advanced Encryption Standard (AES).

This mode of AES is used to protect peering frames when using
the authenticated mesh peering exchange.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:43:38 +03:00
Jouni Malinen
2d4e9c2eb8 Include ieee802_11_common.c in wpa_supplicant build unconditionally
This is needed for number of items and it was possible to make a build
configuration that did not include ieee802_11_common.c while still
trying to use functions from there. While it would be possible to add
NEED_80211_COMMON=y to all the cases where this file is needed, the
extra complexity from this is not really justifiable anymore, so include
the file unconditionally.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 17:03:25 +03:00
Jouni Malinen
01b3bbfc66 test: Remove driver_test.c
The driver_test.c driver wrapper (-Dtest in wpa_supplicant and
driver=test in hostapd) was previously used for testing without real
Wi-Fi hardware. mac80211_hwsim-based tests have practically replaced all
these needs and there has been no improvements or use for driver_test.c
in a long while. Because of this, there has not really been any effort
to maintain this older test tool and no justification to change this
either. Remove the obsoleted test mechanism to clean up the repository.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-11 17:46:04 +03:00
Jouni Malinen
fa21e6c35b Fix CONFIG_MODULE_TESTS=y build without CONFIG_P2P=y
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-15 19:35:22 +03:00
Amit Khatri
9a17b36e55 tests: Makefile change avoiding compiler error for module test
wpa_supplicant was giving below error when "CONFIG_MODULE_TESTS=y" and
"CONFIG_P2P=y" are in .config file:
"wpas_module_tests.c:84: undefined reference to `wps_module_tests'"

This error is coming because "CONFIG_WPS=y" is commented out in .config
file but CONFIG_WPS is getting enabled by CONFIG_P2P in Makefile.

Signed-off-by: Amit Khatri <amit.khatri@samsung.com>
2014-05-31 13:36:59 +03:00
Jouni Malinen
2d2dd488be tests: Add module tests for src/common
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-28 00:56:13 +03:00
Jouni Malinen
8860e0f47c tests: Add printf encoding/decoding module tests
This replaces tests/test-printf.c.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-26 17:21:44 +03:00
Masashi Honma
f0356ec85c eloop: Add epoll option for better performance
This patch adds epoll option for the eloop implementation. This can be
selected with the CONFIG_ELOOP_EPOLL=y build option.

[merit]
See Table1.

Table1. comparison table
+--------+--------+-----------+------------+-------------+
|        | add fd | remove fd | prepare fd | dispatch fd |
+--------+--------+-----------+------------+-------------+
| select | O(1)   | O(1)      | O(N)       | O(N)        |
+--------+--------+-----------+------------+-------------+
| poll   | O(1)   | O(1)      | O(N)       | O(N)        |
+--------+--------+-----------+------------+-------------+
| epoll  | O(1)   | O(1)      | 0          | O(M)        |
+--------+--------+-----------+------------+-------------+
"add fd" is addition of fd by eloop_sock_table_add_sock().
"remove fd" is removal of fd by eloop_sock_table_remove_sock().
"prepare fd" is preparation of fds before wait in eloop_run().
"dispatch fd" is dispatchment of fds by eloop_sock_table_dispatch().
"N" is all watching fds.
"M" is fds which could be dispatched after waiting.

As shown in Table1, epoll option has better performance on "prepare fd" column.
Because select/poll option requires setting fds before every select()/poll().
But epoll_wait() doesn't need it.

And epoll option has also better performance on "dispatch fd" column.
Because select/poll option needs to check all registered fds to find out
dispatchable fds. But epoll option doesn't require checking all registered fds.
Because epoll_wait() returns dispatchable fd set.

So epoll option is effective for GO/AP functionality.

[demerit]
The epoll option requires additional heap memory. In case of P2P GO, it is
about 8K bytes.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-05-16 18:25:51 +03:00
Hu Wang
dd10abccc8 MACsec: wpa_supplicant integration
Add MACsec to the wpa_supplicant build system and configuration file.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-09 20:42:44 +03:00
Jouni Malinen
128cc37558 eap_proxy: Use unique Makefile names for Android and non-Android
Rename the eap_proxy_*.mk file to eap_proxy_*.mak for non-Android builds
so that the same eap_proxy implementation can be more easily included in
the same directory for both cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-15 13:02:25 +03:00
Jouni Malinen
c201f93a9e WPS: Enable WSC 2.0 support unconditionally
There is not much point in building devices with WPS 1.0 only supported
nowadays. As such, there is not sufficient justification for maintaining
extra complexity for the CONFIG_WPS2 build option either. Remove this by
enabling WSC 2.0 support unconditionally.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-25 18:33:21 +02:00
Jouni Malinen
09eef142ea Use internal FIPS 186-2 PRF if needed
Previously, EAP-SIM/AKA/AKA' did not work with number of crypto
libraries (GnuTLS, CryptoAPI, NSS) since the required FIPS 186-2 PRF
function was not implemented. This resulted in somewhat confusing error
messages since the placeholder functions were silently returning an
error. Fix this by using the internal implementation of FIP 186-2 PRF
(including internal SHA-1 implementation) with crypto libraries that do
not implement this in case EAP-SIM/AKA/AKA' is included in the build.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-11 16:44:22 +02:00
Jouni Malinen
a5d75636f9 HS 2.0R2: Add common OSEN definitions
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:23 +02:00
Janusz Dziedzic
4db216fcf7 wpa_supplicant: Add support for IPv6 with UDP ctrl_iface
Add IPv6 support when using udp/udp-remote control interface using the
following new build configuration options:

CONFIG_CTRL_IFACE=udp6
CONFIG_CTRL_IFACE=udp6-remote

This is useful for testing, while we don't need to assign IPv4 address
(static or using DHCP) and can just use auto configured IPv6 addresses
(link local, which is based on the MAC address). Also add scope id
support for link local case.

For example,
./wpa_cli
./wpa_cli -i ::1,9877
./wpa_cli -i fe80::203:7fff:fe05:69%wlan0,9877

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-02-25 16:43:01 +02:00
Jouni Malinen
3cdcb3a4b3 tests: Add module tests for WPS attribute parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 13:41:30 +02:00
Jouni Malinen
ea449b5bfe tests: Add a module test integration to hwsim tests
CONFIG_MODULE_TESTS=y build option can now be used to build in module
tests into hostapd and wpa_supplicant binaries. These test cases will be
used to get better testing coverage for various details that are
difficult to test otherwise through the control interface control. A
single control interface command is used to executed these tests within
the hwsim test framework. This commit adds just the new mechanism, but no
module tests are yet integrated into this mechanism.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 13:08:08 +02:00
Roger Zanoni
848905b12a Avoid undefined references with CONFIG_WPA_TRACE_BFD=y
libdl, libiberty, and libzlib are dependencies for libbfd.

Signed-off-by: Roger Zanoni <roger.zanoni@openbossa.org>
2014-02-20 16:32:26 +02:00
Roger Zanoni
b7cac41254 Fix hostapd and wpa_supplicant build with binutils >= 2.24.x
Using binutils >= 2.24.x and setting
CONFIG_WPA_TRACE/CONFIG_WPA_TRACE_BDF causes both builds to fail with
"#error config.h must be included before this header" message.

Since version 2.24.x, the bfd header checks for PACKAGE and
PACKAGE_VERSION macros.

As suggested in http://sourceware.org/bugzilla/show_bug.cgi?id=14243
projects that use bfd and don't use autotools should define a PACKAGE
macro.

Signed-off-by: Roger Zanoni <roger.zanoni@openbossa.org>
2014-02-19 14:10:12 +02:00
Jouni Malinen
25ef8529c1 P2P: Add support for IP address assignment in 4-way handshake
This new mechanism allows P2P Client to request an IPv4 address from the
GO as part of the 4-way handshake to avoid use of DHCP exchange after
4-way handshake. If the new mechanism is used, the assigned IP address
is shown in the P2P-GROUP-STARTED event on the client side with
following new parameters: ip_addr, ip_mask, go_ip_addr. The assigned IP
address is included in the AP-STA-CONNECTED event on the GO side as a
new ip_addr parameter. The IP address is valid for the duration of the
association.

The IP address pool for this new mechanism is configured as global
wpa_supplicant configuration file parameters ip_addr_go, ip_addr_mask,
ip_addr_star, ip_addr_end. For example:

ip_addr_go=192.168.42.1
ip_addr_mask=255.255.255.0
ip_addr_start=192.168.42.2
ip_addr_end=192.168.42.100

DHCP mechanism is expected to be enabled at the same time to support P2P
Devices that do not use the new mechanism. The easiest way of managing
the IP addresses is by splitting the IP address range into two parts and
assign a separate range for wpa_supplicant and DHCP server.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:44:26 +02:00
Jouni Malinen
9d2cb3ec94 Make CONFIG_TESTING_OPTIONS=y enable all testing options
This makes it easier to enable various testing parameters and
functionality in build configuration.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-12-26 20:50:28 +02:00
Jouni Malinen
a4cfb48694 Add make lcov-html to generate code coverage report
In addition, update build rules to compile object files in the same
directory as the source code file if CONFIG_CODE_COVERAGE=y is set to
make lcov find the source code files.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 13:37:06 +02:00
Jouni Malinen
7feff06567 Add CONFIG_CODE_COVERAGE=y option for gcov
This can be used to measure code coverage from test scripts.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 19:16:12 +02:00
Johannes Berg
594516b4c2 Use monotonic clock for relative time for eloop if available
Relative time shouldn't be calculated based on gettimeofday
because that clock can jump (e.g., when the time is adjusted
by the system administrator.)

On systems where that is available, use CLOCK_BOOTTIME (on
fairly recent Linux systems, this clock takes into account
the time spend suspended) or CLOCK_MONOTONIC (on Linux and
some POSIX systems, this clock is just freely running with
no adjustments.)

Reported-by: Holger Schurig <holgerschurig@gmail.com>
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-11-20 23:52:56 +02:00
Eliad Peller
f2112b2ac8 wpa_supplicant: Add CONFIG_IEEE80211AC
In order to support P2P GO with 11ac support, add CONFIG_IEEE80211AC
config option support to the Makefile.

Signed-hostap: Eliad Peller <eliadx.peller@intel.com>
2013-10-27 19:32:03 +02:00
Janusz Dziedzic
e76da50529 hostapd: Add AP DFS support
Add DFS structures/events handlers, CAC handling, and radar detection.
By default, after radar is detected or the channel became unavailable, a
random channel will be chosen.

This patches are based on the original work by Boris Presman and
Victor Goldenshtein. Most of the DFS code is moved to a new dfs.c/dfs.h
files.

Cc: Boris Presman <boris.presman@ti.com>
Cc: Victor Goldenshtein <victorg@ti.com>

Signed-hostap: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-17 21:05:15 +03:00
Jouni Malinen
7e7610d788 EAP-EKE: Add peer implementation
This adds a new password-based EAP method defined in RFC 6124.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-07 20:30:10 +03:00
Jouni Malinen
aa20e1a1fb Remove CONFIG_NO_WPA2 build parameter
There is not much use for enabling WPA without WPA2 nowadays since most
networks have been upgraded to WPA2. Furthermore, the code size savings
from disabling just WPA2 are pretty small, so there is not much
justification for maintaining this build option. Remove it to get rid of
undesired complexity.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 20:13:25 +03:00
Johannes Berg
e9ee8dc394 wpa_supplicant: Support VHT capability overrides
Add support for VHT capability overrides to allow testing connections
with a subset of the VHT capabilities that are actually supported by
the device. The only thing that isn't currently supported (by mac80211
and this code) is the RX/TX highest rate field.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-03-10 18:04:39 +02:00
Deepthi Gowri
45f4a97a3a eap_proxy: Add mechanism for allowing EAP methods to be offloaded
In addition to the offload mechanism, the Android configuration and
makefiles are extended to allow this to be configured for the build by
dropping in platform specific configuration files and makefile without
having to modify any existing files.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-08 11:54:01 +02:00
Jouni Malinen
90d215b264 Fix wpa_priv build
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 19:06:53 +02:00
Jouni Malinen
a13e1cc345 Fix EAP-pwd server file name for wpa_supplicant AP builds
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 19:06:53 +02:00
Jouni Malinen
fbfb0e65bf SAE: Add support for FFC groups
This allows FFC groups to be used with SAE. Though, these groups are not
included in the default sae_groups value based on what is available
since the FFC groups have the additional requirement of using a safe
prime with the current implementation (or specification of the group
order).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:54 +02:00
Jouni Malinen
aadabe7045 SAE: Use crypto wrappers instead of direct OpenSSL calls
This makes the SAE implementation independent of the crypto/bignum
library.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:52 +02:00
Jouni Malinen
8e31e9550a SAE: Add generation of the commit message fields
This adds derivation of PWE and the needed commit values so that the
full SAE commit message can be built.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:52 +02:00
Jouni Malinen
41014724e2 Fix CONFIG_NO_WPA build with TLS
The SHA1 and MD5 functions need to be included in builds that use TLS
even if WPA support is removed.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-18 15:16:00 +02:00
Jouni Malinen
5d247692f6 Fix wpa_supplicant CONFIG_AP=y build with WNM enabled
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-16 19:31:36 +02:00
Jouni Malinen
ad3872a372 WNM: Use CONFIG_WNM more consistently
Replace CONFIG_IEEE80211V with CONFIG_WNM to get more consistent build
options for WNM-Sleep Mode operations. Previously it was possible to
define CONFIG_IEEE80211V without CONFIG_WNM which would break the build.
In addition, IEEE 802.11v has been merged into IEEE Std 802.11-2012 and
WNM is a better term to use for this new functionality anyway.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-16 18:22:54 +02:00
Jouni Malinen
2dfb9a447c WNM: Fix CONFIG_WNM use in Makefile
This code was within ifdef CONFIG_AP and did not get included unless
AP mode support was also enabled.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-12-16 12:28:19 +02:00
Vladimir Kondratiev
9c6f8cb9c8 Fix wpa_supplicant compilation after adding eap_user database
Commit ee431d77a5 broke wpa_supplicant
compilation:

../src/ap/ieee802_1x.o: In function `ieee802_1x_get_eap_user':
/../src/ap/ieee802_1x.c:1689: undefined reference to `hostapd_get_eap_user'
collect2: error: ld returned 1 exit status
make: *** [wpa_supplicant] Error 1

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
2012-11-21 17:49:47 +02:00
Jouni Malinen
207fb86411 WPS: Remove deprecated UFD config method and OOB ctrl_iface
The UFD (USB flash drive) configuration method was deprecated in WSC
2.0. Since this is not known to be used, remove the UFD implementation
from hostapd and wpa_supplicant to allow the WPS implementation to be
cleaned up. This removes the now unused OOB operations and ctrl_iface
commands that had already been deprecated by the new NFC operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-11 13:01:06 +02:00
Jouni Malinen
9f36eac6e5 WPS: Remove old OOB NFC interface
The old WPS interface for using NFC has no known deployments and even
the binary libraries referenced here are not easily available anymore.
Since the new interface for using NFC with WPS covers the same
functionality, remove the old implementation to clean up WPS
implementation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-10-28 18:20:03 +02:00
Jouni Malinen
c10347f246 Add initial parts for SAE
This introduces new AKM for SAE and FT-SAE and adds the initial parts
for going through the SAE Authentication frame exchange. The actual SAE
algorithm and new fields in Authentication frames are not yet included
in this commit and will be added separately. This version is able to
complete a dummy authentication with the correct authentication
algorithm and transaction values to allow cfg80211/mac80211 drivers to
be tested (all the missing parts can be handled with
hostapd/wpa_supplicant changes).

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-30 19:51:07 +03:00
Jouni Malinen
9675ce354a WFD: Add Wi-Fi Display support
This commit adds control interface commands and internal storage of
Wi-Fi Display related configuration. In addition, WFD IE is now added
to various P2P frames, Probe Request/Response, and (Re)Association
Request/Response frames. WFD subelements from peers are stored in the
P2P peer table.

Following control interface commands are now available:
SET wifi_display <0/1>
GET wifi_display
WFD_SUBELEM_SET <subelem> [hexdump of length+body]
WFD_SUBELEM_GET <subelem>

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-29 19:51:29 +03:00
Jouni Malinen
065d2895b4 Add UNAUTH-TLS vendor specific EAP type
This EAP type uses a vendor specific expanded EAP header to encapsulate
EAP-TLS with a configuration where the EAP server does not authenticate
the EAP peer. In other words, this method includes only server
authentication. The peer is configured with only the ca_cert parameter
(similarly to other TLS-based EAP methods). This method can be used for
cases where the network provides free access to anyone, but use of RSN
with a securely derived unique PMK for each station is desired.

The expanded EAP header uses the hostapd/wpa_supplicant vendor
code 39068 and vendor type 1 to identify the UNAUTH-TLS method.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-22 22:34:11 +03:00
Jouni Malinen
44ec48ebfd FIPS: Remove md5-non-fips.c
Commit c9e08af24f removed the only user of
the special case MD5 use that would be allowed in FIPS mode in
tls_prf_sha1_md5(). Commit 271dbf1594
removed the file from the build, but left the implementation into the
repository. To clean things up even further, remove this functionality
completely since it is not expected to be needed for FIPS mode anymore.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 16:53:15 +03:00
Jouni Malinen
26a379224c OpenSSL: Implement SHA256 HMAC functions using HMAC API
Use the OpenSSL HMAC implementation instead of the internal sha256.c
implementation of HMAC with SHA256.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 22:34:35 +03:00
Jouni Malinen
ab637dcb37 Move SHA256-based PRF function into a separate C file
This makes it easier to conditionally build in SHA256 functions based
on which TLS/crypto library is used.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 22:24:11 +03:00
Jouni Malinen
0b5e98557e FIPS: Use OpenSSL CMAC implementation instead of aes-omac1.c
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 22:19:53 +03:00
Jouni Malinen
982bafedaf FIPS: Mix in OpenSSL RAND_bytes() into random_get_bytes()
Make sure that the OpenSSL DRBG gets used when generating
random numbers in FIPS mode.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 21:49:41 +03:00
Jouni Malinen
030d062fac OpenSSL: Implement SHA1 HMAC functions using HMAC API
Use the OpenSSL HMAC implementation instead of the internal sha1.c
implementation of HMAC with SHA1.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 20:38:25 +03:00
Jouni Malinen
d6150094e0 Move SHA1-based PRF function into a separate C file
This makes it easier to conditionally build in SHA1 functions based
on which TLS/crypto library is used.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 20:26:16 +03:00
Jouni Malinen
e40c86ad27 OpenSSL: Use library function for PBKDF2 passphrase-to-PSK
Use the OpenSSL PKCS5_PBKDF2_HMAC_SHA1() function instead of the
internal implementation in sha1-pbkdf2.c.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 20:26:16 +03:00
Jouni Malinen
6e6909a97e FIPS: Remove MD5 from the CONFIG_FIPS=y build
When CONFIG_FIPS=y is used, do not include MD5 in the build and disable
EAPOL-Key frames that use MD5 (WPA/TKIP and dynamic WEP with IEEE
802.1X).

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 20:03:17 +03:00
Jouni Malinen
271dbf1594 FIPS: Do not build md5-non-fips.o unless really needed
This is not needed anymore when using OpenSSL keying exporter
functionality for PRF.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 19:58:15 +03:00
Jouni Malinen
c9e08af24f Do not export TLS keys in FIPS mode
Only allow the TLS library keying material exporter functionality to be
used for MSK derivation with TLS-based EAP methods to avoid exporting
internal TLS keys from the library.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 19:38:15 +03:00
Jouni Malinen
411f567050 Allow libdl to be linked in after OpenSSL
OpenSSL-based builds may need libdl in the linker line after the OpenSSL
library. CONFIG_TLS_ADD_DL=y can now be used to force that if needed.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 19:34:38 +03:00
Jouni Malinen
e001191837 Add "make fips" for wpa_supplicant builds with OpenSSL
This can be used for convenience to build wpa_supplicant with OpenSSL
FIPS object module. CONFIG_FIPS=y is expected to be used in
wpa_supplicant/.config when using this option.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 17:53:05 +03:00
Janusz Dziedzic
afadf423db wpa_supplicant: Add optional remote access for ctrl_iface
Add new option for ctrl iface: CONFIG_CTRL_IFACE=udp-remote. This
enables remote access to control interface via UDP port(s). This should
be used for testing purpose only since there is no authentication or
access control on the commands.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2012-08-05 20:01:07 +03:00
Jouni Malinen
306ae22556 EXT PW: Add framework for supporting external password storage
This new mechanism can be used to make wpa_supplicant using external
storage (e.g., key store in the operating system) for passwords,
passphrases, and PSKs. This commit is only adding the framework part
needed to support this, i.e., no actual configuration parameter can
yet use this new mechanism. In addition, only a simple test backend
is added to allow developer testing of the functionality.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-03 22:15:42 +03:00
Xi Chen
75cad1a0d4 WNM: Add WNM-Sleep Mode for station mode
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-01 13:21:27 +03:00
Jay Katabathuni
19a8ad9944 HS 2.0: Add Hotspot 2.0 Indication for AP
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-07-30 18:23:38 +03:00
Jouni Malinen
40a5e3bfde WPS: Add a standalone tool for building NFC password tokens
nfc_pw_token can be used to build random NFC password token for WPS.
This tool prints out the wpa_supplicant.conf (or hostapd.conf)
parameters and the hexdump of the WPS password token (with and without
NDEF encapsulation) so that it can be written to a NFC tag with an
external program.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-28 21:01:37 +03:00
Tomasz Bursztyka
e3659c89d2 Add a simple periodic autoscan module
This module will sets a fixed scanning interval. Thus, the parameter to
this module is following this format: <fixed interval>

Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 19:28:21 +03:00
Tomasz Bursztyka
c0fba2b38d Add autoscan module named exponential
This module will compute the interval on a base exponential. Thus,
params to this module are following this format: <base>:<limit>

Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 19:22:56 +03:00
Tomasz Bursztyka
7c865c6853 Add automatic scanning support
Like bgscan, autoscan is an optional module based feature to automate
scanning but while disconnected or inactive.

Instead of requesting directly a scan, it only sets the scan_interval
and the sched_scan_interval. So, if the driver supports sched_scan,
autoscan will be able to tweak its interval. Otherwise, the tweaked
scan_interval will be used. If scan parameters needs to be tweaked, an
autoscan_params pointer in wpa_s will provide those. So req_scan /
req_sched_scan will not set the scan parameters as they usually do, but
instead will use this pointer.

Modules will not have to request a scan directly, like bgscan does.
Instead, it will need to return the interval it wants after each
notification.

Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 18:55:41 +03:00
Jouni Malinen
b6668734ab WNM: Add advertisement of BSS max idle period
If WNM is enabled for the build (CONFIG_WNM=y), add BSS max idle period
information to the (Re)Association Response frame from the AP and parse
this information on the station. For SME-in-wpa_supplicant case, add a
timer to handle periodic transmission of the keep-alive frame. The
actual request for the driver to transmit a frame is not yet
implemented.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-27 17:35:00 -07:00
Jay Katabathuni
25471fe3b9 HS 2.0: Add Hotspot 2.0 ANQP routines
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-08 23:29:40 +03:00
Johannes Berg
4f68895e92 debug: Add option to log to Linux tracing
Add the option (-T) to wpa_supplicant to log all debug messages into the
kernel tracing, allowing to aggregate kernel debugging with
wpa_supplicant debugging and recording all with trace-cmd.

Since tracing has relatively low overhead and can be filtered
afterwards, record all messages regardless of log level. However, it
will honor the -K option and not record key material by default.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-03-31 13:55:33 +03:00
Jouni Malinen
1d4839ee85 Fix CONFIG_AP + CONFIG_INTERWORKING build
Need to include gas_serv.o in the build to get all the needed symbols.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-27 16:21:50 +02:00
Ben Greear
2df4c4ef2f eloop: Support poll() in eloop
When using more than around 200 virtual stations, we start hitting the
max number of file descriptors supported by select(). This patch adds
support for poll(), which has no hard upper limit.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2012-02-12 21:12:22 +02:00
Ben Greear
80e8a5eef1 Support HT capability overrides
This allows HT capabilities overrides on kernels that
support these features.

MCS Rates can be disabled to force to slower speeds when using HT.
Rates cannot be forced higher.

HT can be disabled, forcing an 802.11a/b/g/n station to act like
an 802.11a/b/g station.

HT40 can be disabled.

MAX A-MSDU can be disabled.
A-MPDU Factor and A-MPDU Density can be modified.

Please note that these are suggestions to the kernel. Only mac80211
drivers will work at all. The A-MPDU Factor can only be decreased and
the A-MPDU Density can only be increased currently.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2012-01-29 21:01:31 +02:00
Jouni Malinen
ea5cb06ef9 Install only the binaries into BINDIR
There is no point in installing *.service files into BINDIR.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-01-29 14:20:41 +02:00
Grant Erickson
b111764384 build: Fix install target parent directory prerequisites
This changes the install target such that parent directories of
installed paths area created and each path is only installed
on a dependency basis.

Signed-off-by: Grant Erickson <marathon96@gmail.com>
2012-01-29 14:18:22 +02:00
Jouni Malinen
9013edc300 dbus: Remove unused D-Bus version defines
These have not been used since commit
8ddef94bd4.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-01-29 12:53:12 +02:00
Jouni Malinen
6897ce14a4 Rename systemd template files to avoid @ in the file name
Perforce does not like @ in the file name and since these template files
do not really need to have that in the name, make the files in
repository friendlier to Perforce. The generated *.service file will
maintain their old names.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-01-28 17:12:30 +02:00
Jouni Malinen
48f24f93a5 wpa_passphrase: Include SHA256 objects to fix some build combinations
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 22:17:41 +02:00
Jouni Malinen
ca84eed7ad TLS: Add build configuration for TLS v1.2 support
This allows the internal TLS implementation to be built for TLS v1.2
support. In addition to the build option, this changes the TLS PRF
based on the negotiated version number. Though, this commit does not
yet complete support for TLS v1.2.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 21:45:07 +02:00
Jouni Malinen
8307489840 Add implementation of TLS v1.2 PRF (P_SHA256)
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 21:10:06 +02:00
Alan T. DeKok
8205c82a48 wpa_supplicant: Make objects depend on the .config file
The source code compiles into different objects depending on
the contents of .config. Therefore, the objects should depend
on .config.

Previously, only the executables depended on .config. This meant
that they were re-linked when .config changed. But that relink
process used the old (and now wrong) objects.
2011-11-19 11:46:39 +02:00
Jouni Malinen
aea855d752 Move wpa_scan_results_free() into shared C file
Replace the inline helper function with a new C file that can be used
for common driver API related function.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-13 18:56:26 +02:00
Jouni Malinen
67a5206482 Remove obsoleted Qt3-based wpa_gui
This code has not been maintained for years and there is no plan on
doing so either in the future. The Qt4-based wpa_gui-qt4 version can be
used as a replacement for this older wpa_gui version.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-03 17:48:31 +02:00
Jouni Malinen
a624f20bcd wpa_cli: Add completion functions for P2P peers and BSSes
Keep a local list of found P2P peers and BSS entries and use those
to complete arguments for p2p_peer, p2p_connect, and bss commands.
2011-10-28 23:50:37 +03:00
Jouni Malinen
8271f14a4d Automatically include WPS and AP support if P2P is enabled
CONFIG_WPS=y and CONFIG_AP=y are required if CONFIG_P2P=y so
we may as well enable them automatically in that case.
2011-10-28 21:17:08 +03:00
Arik Nemtsov
ba3936d990 TDLS: Support setting CONFIG_TDLS_TESTING in .config
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
2011-10-23 22:14:31 +03:00
Jouni Malinen
17fbb751e1 Remove user space client MLME
This code was used only with driver_test.c to allow MLME operations
in hostapd to be tested without having to use a real radio. There
are no plans on extending this to any other use than testing and
mac80211_hwsim has now obsoled the need for this type of testing.
As such, we can drop this code from wpa_supplicant to clean up the
implementation of unnecessary complexity.
2011-10-22 22:45:38 +03:00
Andrii Bordunov
d5695081c2 wpa_priv: Link in trace.o to fix CONFIG_WPA_TRACE build 2011-10-22 22:18:54 +03:00
Jouni Malinen
8d2639127f wpa_priv: Link in ieee802_11_common.o if driver_nl80211 is used 2011-10-22 22:17:41 +03:00
Jouni Malinen
062390efd4 Start deprecating various AP mode driver_ops
The preferred way of configuring AP mode will be to use set_ap() instead
of number of separate operations hostapd has collected over the years.
2011-10-17 18:35:25 +03:00
Mahesh Palivela
d4370eac2e Move SA Query mechanism into a file that can be shared more easily
This is the first step in allowing SA Query mechanism in hostapd to be
used with drivers that implement authentication and association MLME/SME
(i.e., do not use ieee802_11.c).
2011-10-17 17:33:17 +03:00
Jouni Malinen
afc064fe7a Interworking: Add ANQP query requests
Add mechanism for using GAS/ANQP to query Interworking related
information from APs. The received information is stored in the BSS
table and can be viewed with ctrl_iface BSS command.

New ctrl_iface command ANQP_GET can be used to fetch ANQP elements from
a specific AP. Additional commands FETCH_ANQP and STOP_FETCH_ANQP can be
used to initiate and stop an iteration through all APs in the BSS table
that indicate support Interworking to fetch ANQP elements from them.
2011-10-16 23:55:34 +03:00
Jouni Malinen
46ee0427b1 IEEE 802.11u: Allow Interworking and HESSID to be configured
The new wpa_supplicant.conf file global parameters interworking and
hessid can be used to configure wpa_supplicant to include
Interworking element in Probe Request frames.
2011-10-16 23:55:34 +03:00
Jouni Malinen
24f6497c34 GAS: Use off-channel operations for requests
This separates off-channel Action frame TX/RX from P2P into a generic
implementation that can now be used both for P2P and GAS needs.
2011-09-29 22:19:51 +03:00
Jouni Malinen
04ea7b7947 GAS: Add a generic GAS query module
This implements GAS request mechanism that is aimed at being used to
replace use case specific GAS/ANQP implementations in the future.
Compared to the earlier implementation in P2P SD, this implementation
includes support for multiple concurrent requests and more thorough
validation of frames against the pending query data.

GAS header processing, including comeback and reassembly, are handled
within gas_query.c and the users of this module will only need to
provide the Query Request and process the (possibly reassembled)
Query Response.
2011-09-29 22:19:15 +03:00
Jouni Malinen
0c840c33f7 Move GAS/ANQP build routines to a separate file from P2P
GAS/ANQP is a generic protocol and in no way specific to P2P, so move
routines used to build GAS/ANQP frames to a separate file that can be
shared for other uses than just P2P service discovery.
2011-09-29 22:18:46 +03:00
Jouni Malinen
fd2f2d0489 Remove EAP-TTLSv1 and TLS/IA
These protocols seem to be abandoned: latest IETF drafts have expired
years ago and it does not seem likely that EAP-TTLSv1 would be
deployed. The implementation in hostapd/wpa_supplicant was not complete
and not fully tested. In addition, the TLS/IA functionality was only
available when GnuTLS was used. Since GnuTLS removed this functionality
in 3.0.0, there is no available TLS/IA implementation in the latest
version of any supported TLS library.

Remove the EAP-TTLSv1 and TLS/IA implementation to clean up unwanted
complexity from hostapd and wpa_supplicant. In addition, this removes
any potential use of the GnuTLS extra library.
2011-09-25 21:28:32 +03:00
Jouni Malinen
5c47af9a7a TLS: Add support for TLS v1.1 (RFC 4346) with internal TLS
This is disabled by defautl and can be enabled with CONFIG_TLSV11=y
build configuration parameter.
2011-09-25 17:24:46 +03:00
Jouni Malinen
5e67037b3a Fix SIM/USIM simulator build to include AES encryption function 2011-09-07 16:17:08 +03:00
Henry Gebhardt
f0573c7989 wpa_supplicant: Edit BINDIR in dbus and systemd service files
This is useful, since in Gentoo BINDIR=/usr/sbin.
2011-07-15 12:25:02 +03:00
Paul Stewart
572a171f4f wpa_supplicant: Respect PKG_CONFIG variable if set in the environment
This is required for cross-compilation support on certain
platforms to avoid changing the pkg-config files themselves.

Signed-off-by: David James <davidjames@chromium.org>
Signed-off-by: Paul Stewart <pstew@chromium.org>
2011-07-04 20:35:38 +03:00
Jouni Malinen
62b98282ba Fix CONFIG_NO_WPA_PASSPHRASE=y build
Need to define CONFIG_NO_PBKDF2 even though the crypto cleanup moved
the function to a separate file since there is conditional code in
wpa_supplicant/config.c. In addition, wpa_passphrase should not be
built at all if passphrase functionality is removed.
2011-06-23 19:53:45 +03:00
Johannes Berg
9abafccc0d DBus: Add support for P2P primitives
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-12 15:08:19 -07:00
Sam Leffler
3e1996216e Add support for setting the syslog facility from the config file
This enables setting the syslog facility at build time.
2011-03-20 11:48:42 +02:00
Jouni Malinen
586bad514b Make the link process quieter unless V=1 is specified
Hide the long command lines used for linking the binaries in the
default build. "make V=1" can be used to show the actual commands
if needed.
2011-03-17 12:31:38 +02:00
Ganesh Prasadh
281ff0aa76 TDLS: Add initial support for TDLS (IEEE Std 802.11z-2010) 2011-03-06 14:53:49 +02:00
Jouni Malinen
f981eabcf0 WPS: Add option to disable open networks by default
CONFIG_WPS_REG_DISABLE_OPEN=y can be used to configure wpa_supplicant
to disable open networks by default when wps_reg command is used to
learn the current AP settings. When this is enabled, there will be a
WPS-OPEN-NETWORK ctrl_iface event and the user will need to explicitly
enable the network (e.g., with "select_network <id>") to connect to
the open network.
2010-12-30 12:28:13 +02:00
Jouni Malinen
34dbfc0cb3 Fix CONFIG_AP=y build without NEED_AP_MLME driver 2010-11-25 23:41:32 +02:00
Jouni Malinen
bbb921daaa Maintain internal entropy pool for augmenting random number generation
By default, make hostapd and wpa_supplicant maintain an internal
entropy pool that is fed with following information:

hostapd:
- Probe Request frames (timing, RSSI)
- Association events (timing)
- SNonce from Supplicants

wpa_supplicant:
- Scan results (timing, signal/noise)
- Association events (timing)

The internal pool is used to augment the random numbers generated
with the OS mechanism (os_get_random()). While the internal
implementation is not expected to be very strong due to limited
amount of generic (non-platform specific) information to feed the
pool, this may strengthen key derivation on some devices that are
not configured to provide strong random numbers through
os_get_random() (e.g., /dev/urandom on Linux/BSD).

This new mechanism is not supposed to replace proper OS provided
random number generation mechanism. The OS mechanism needs to be
initialized properly (e.g., hw random number generator,
maintaining entropy pool over reboots, etc.) for any of the
security assumptions to hold.

If the os_get_random() is known to provide strong ramdom data (e.g., on
Linux/BSD, the board in question is known to have reliable source of
random data from /dev/urandom), the internal hostapd random pool can be
disabled. This will save some in binary size and CPU use. However, this
should only be considered for builds that are known to be used on
devices that meet the requirements described above. The internal pool
is disabled by adding CONFIG_NO_RANDOM_POOL=y to the .config file.
2010-11-24 01:29:40 +02:00
Jouni Malinen
e8ecb5fb49 Move wpa_cli readline integration into src/utils/edit_readline.c
All three line editing options are now located in src/utils/edit*.c
and provide the same API to allow easy build time selection.
2010-11-14 22:37:43 +02:00
Jouni Malinen
82a855bda8 Move command line editing routines into src/utils/edit*.[ch]
This allows the same routines to be shared with other programs
since these are not really specific to wpa_cli.
2010-11-14 20:59:29 +02:00
Jouni Malinen
aee680e8b2 wpa_cli: Add internal line edit implementation
CONFIG_WPA_CLI_EDIT=y can now be used to build wpa_cli with internal
implementation of line editing and history support. This can be used
as a replacement for CONFIG_READLINE=y.
2010-11-14 19:15:23 +02:00
Jouni Malinen
cd10156798 wpa_cli: Replace CONFIG_WPA_CLI_FORK design with eloop
Instead of using a separate process to receive and print event
messages, use a single-process design with eloop to simply
wpa_cli and interaction with readline.
2010-11-14 13:16:51 +02:00
Jouni Malinen
b4e34f2fdf WPS: Make testing operations configurable at runtime
Instead of build time options (CONFIG_WPS_TESTING_EXTRA_CRED and
CONFIG_WPS_EXTENSIBILITY_TESTING), use a single build option
(CONFIG_WPS_TESTING) and runtime configuration of which testing
operations are enabled. This allows a single binary to be used
for various tests.

The runtime configuration can be done through control interface
with wpa_cli/hostapd_cli commands:
Enable extensibility tests:
set wps_version_number 0x57
Disable extensibility tests (WPS2 build):
set wps_version_number 0x20
Enable extra credential tests:
set wps_testing_dummy_cred 1
Disable extra credential tests:
set wps_testing_dummy_cred 0
2010-09-21 19:51:23 -07:00
Dan Harkins
df684d82ff EAP-pwd: Add support for EAP-pwd server and peer functionality
This adds an initial EAP-pwd (RFC 5931) implementation. For now,
this requires OpenSSL.
2010-09-14 21:51:40 -10:00
Jouni Malinen
b22128efdc P2P: Add initial version of P2P Module 2010-09-09 07:17:17 -07:00
Jouni Malinen
cae67937ca WPS: Fix CONFIG_WPS_STRICT build option
This was not supposed to be depending on CONFIG_WPS_NFC.
2010-09-09 06:07:49 -07:00
Jouni Malinen
53587ec183 WPS 2.0: Make WSC 2.0 support to be build option (CONFIG_WPS2)
For now, the default build will only include WSC 1.0 support.
CONFIG_WPS2=y can be used to add support for WSC 2.0.
2010-09-09 06:07:48 -07:00
Jouni Malinen
54f489be45 WPS 2.0: Validate WPS attributes in management frames and WSC messages
If CONFIG_WPS_STRICT is set, validate WPS IE(s) in management frames and
reject the frames if any of the mandatory attributes is missing or if an
included attribute uses an invalid value. In addition, verify that all
mandatory attributes are included and have valid values in the WSC
messages.
2010-09-09 06:07:48 -07:00
Jouni Malinen
c4d71c2505 bgscan: Add starting point for more advanced bgscan module: learn
This is based on the bgscan "simple" module and this initial commit
does not add any new functionality.
2010-07-10 15:55:48 -07:00
Jouni Malinen
25c226ea45 Fix CONFIG_AP=y build without CONFIG_IEEE8021X_EAPOL=y 2010-05-23 12:18:47 +03:00
Masashi Honma
37a86b7b36 Fix: AP mode wpa_supplicant build
The wpa_supplicant compilation with CONFIG_AP option and without
CONFIG_IEEE80211R, CONFIG_WPS, NEED_SME, CONFIG_CLIENT_MLME options
results in following messages.

../src/ap/drv_callbacks.o: In function `hostapd_notif_assoc':
../src/ap/drv_callbacks.c:59: undefined reference to
`ieee802_11_parse_elems'
gmake: *** [wpa_supplicant] Error 1
2010-05-23 12:12:40 +03:00
Jouni Malinen
0b86f67a29 Add wpa_gui-qt4 translation files into build 2010-04-18 19:15:07 +03:00
Masashi Honma
5008cb5e55 Support for Solaris default shell restriction
Some shells (like Solaris default /bin/sh) doesn't allow -e
option for file existence check. Use -f instead.
2010-04-17 17:15:23 +03:00
Jouni Malinen
20e26395c8 SME: Fix build without 802.11r or WPS 2010-04-12 09:39:36 +03:00
Jouni Malinen
94d9bfd59b Rename EAP server source files to avoid duplicate names
This makes it easier to build both EAP peer and server functionality
into the same project with some toolchains.
2010-02-19 18:54:07 +02:00
Jouni Malinen
00468b4650 Add TLS client events, server probing, and srv cert matching
This allows external programs (e.g., UI) to get more information
about server certificate chain used during TLS handshake. This can
be used both to automatically probe the authentication server to
figure out most likely network configuration and to get information
about reasons for failed authentications.

The follow new control interface events are used for this:
CTRL-EVENT-EAP-PEER-CERT
CTRL-EVENT-EAP-TLS-CERT-ERROR

In addition, there is now an option for matching the server certificate
instead of the full certificate chain for cases where a trusted CA is
not configured or even known. This can be used, e.g., by first probing
the network and learning the server certificate hash based on the new
events and then adding a network configuration with the server
certificate hash after user have accepted it. Future connections will
then be allowed as long as the same server certificate is used.

Authentication server probing can be done, e.g., with following
configuration options:
    eap=TTLS PEAP TLS
    identity=""
    ca_cert="probe://"

Example set of control events for this:
CTRL-EVENT-EAP-STARTED EAP authentication started
CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21
CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected
CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' hash=5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a
CTRL-EVENT-EAP-TLS-CERT-ERROR reason=8 depth=0 subject='/C=US/ST=California/L=San Francisco/CN=Server/emailAddress=server@kir.nu' err='Server certificate chain probe'
CTRL-EVENT-EAP-FAILURE EAP authentication failed

Server certificate matching is configured with ca_cert, e.g.:
    ca_cert="hash://server/sha256/5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a"

This functionality is currently available only with OpenSSL. Other
TLS libraries (including internal implementation) may be added in
the future.
2010-02-13 11:14:23 +02:00
Jouni Malinen
d1f9c410c1 Remove src/drivers/scan_helpers.c
Most of this file was already moved into wpa_supplicant/scan.c and
we can remove the file completely by having couple of small helper
functions copied to the remaining users outside core wpa_supplicant
code.
2010-01-03 20:27:32 +02:00
Jouni Malinen
ce4f7fdbdd dbus: Get rid of libxml2 dependency with introspection
The XML used in D-Bus introspection is simple and there is no need to use
libxml2 to generate it. This gets rid of the dependency on the large
library by using internal XML generation.
2010-01-01 17:51:15 +02:00
Jouni Malinen
04551ee6d6 dbus: Move introspection support into a separate file 2010-01-01 14:03:00 +02:00
Jouni Malinen
bacfd05fe5 dbus: Rename old D-Bus API files to include "_old"
This makes it easier to figure out which file is used by which
D-Bus interface.
2009-12-31 21:55:32 +02:00
Jouni Malinen
8ddef94bd4 dbus: Share common initialization code for both old and new interface
This was mostly identical code that had been copied for the new D-Bus
API implementation and as such, should really have been shared from
the beginning. In addition, the copied code ended up generating
interesting stack traces since the actual D-Bus connection was being
shared even though the pointer to it was stored in two distinct
data structures. The old D-Bus code ended up dispatching some
D-Bus callbacks which ended up running the new D-Bus code.

Since the private context pointers were mostly identical, everything
seemed to more or less work, but this design was just making things
more complex and potentially very easy to break.
2009-12-31 00:15:56 +02:00
Jouni Malinen
34359a3fb1 Include BSS table unconditionally in the wpa_supplicant build
This will allow more cleanup to be done for scan results processing
since all code can now be made to depend on the BSS table instead of
the temporary scan results.

Once remaining code has been converted to use the BSS table, the new
scan results can be freed immediately after the BSS table has been
updated. In addition, filtering of BSS information should be added
to better support systems with limited resources. For now, memory
use can be limited by defining WPA_BSS_MAX_COUNT to be smaller.
Anyway, better filtering of results to only the configured networks
should be added to improve this.
2009-12-28 01:14:56 +02:00
Jouni Malinen
83922c2d34 Add BSS table to track scan results without dropping information
Collect information from scan results into a BSS table that will not
expire information as quickly as scan results where every new scan,
no matter for how limited set of channels/SSIDs, clears all old
information.

For now, this is only used for D-Bus BSS added/removed notifications,
but this will likely be extended to be used internally instead of the
scan results to better support partial scans.
2009-12-27 21:07:47 +02:00
Jouni Malinen
6226e38d00 Rename some src/ap files to avoid duplicate file names
Doxygen and some build tools may get a bit confused about same file
name being used in different directories. Clean this up a bit by
renaming some of the duplicated file names in src/ap.
2009-12-26 00:05:40 +02:00
Jouni Malinen
70db2ab308 Move rest of the generic AP mode functionality into src/ap 2009-12-25 20:06:07 +02:00
Jouni Malinen
c442055ecf Move WPA authenticator glue code into a separate file 2009-12-25 14:02:17 +02:00
Jouni Malinen
2586bc64d0 Move authentication server setup into separate file 2009-12-25 13:43:43 +02:00
Jouni Malinen
0e2d35c614 Move ctrl_iface_ap.c into src/ap 2009-12-25 12:25:55 +02:00
Jouni Malinen
32da61d9c9 Move wps_hostapd.c into src/ap 2009-12-25 01:26:37 +02:00
Jouni Malinen
1057d78eb8 Move generic AP functionality implementation into src/ap
This code can be shared by both hostapd and wpa_supplicant and this
is an initial step in getting the generic code moved to be under the
src directories. Couple of generic files still remain under the
hostapd directory due to direct dependencies to files there. Once the
dependencies have been removed, they will also be moved to the src/ap
directory to allow wpa_supplicant to be built without requiring anything
from the hostapd directory.
2009-12-25 01:12:50 +02:00
Jouni Malinen
bf65bc638f hostapd: Use separate driver operations abstraction
It would be bettet to avoid including driver_i.h, i.e., direct driver
operation calls from hostapd components. This is an initial step in
that direction for WPS IE updates.
2009-12-24 16:15:22 +02:00
Jouni Malinen
f2f7d965b8 Add option libbfd support for tracing code
CONFIG_WPA_TRACE=y and CONFIG_WPA_TRACE_BFD=y can now be used to get
even more complete symbols (func/file/line and inline functions) for
backtraces.
2009-12-20 23:35:06 +02:00
Jouni Malinen
a206a29a54 dbus: Remove the confusing "ctrl_iface_" prefix from file names
The D-Bus interface does not really have anything to do with the
wpa_supplicant ctrl_iface interface and as such, this prefix in
dbus files is both confusing and unnecessarily. Make the file names
shorter by removing this prefix.
2009-12-20 21:11:35 +02:00
Jouni Malinen
36da1358bc dbus: Move some of conditional WPS code into separate files 2009-12-20 21:04:40 +02:00
Jouni Malinen
eb3b34ceea dbus: Clean dbus build files on wpa_supplicant 'make clean'
In addition, add preliminary build rules for build libwpadbus.a.
2009-12-20 20:29:09 +02:00
Jouni Malinen
19b3211d19 Move D-Bus related files into their own subdirectory 2009-12-20 20:11:14 +02:00
Jouni Malinen
94c3e91fc5 Add empty FIPS PRF wrapper for CryptoAPI 2009-12-20 18:14:20 +02:00
Jouni Malinen
fb4baa688b Add memory allocation analyzer to verify OS wrapper use
WPA_TRACE=y builds will now verify that memory allocation in done
consistently using os_{zalloc,malloc,realloc,strdup,free} (i.e., no
mixing of os_* functions and unwrapper functions). In addition, some
common memory allocation issues (double-free, memory leaks, etc.) are
detected automatically.
2009-12-19 21:47:56 +02:00
Jouni Malinen
930f704aac Add backtrace support for debugging
WPA_TRACE=y can now be used to enable internal backtrace support that
will provide more details about implementation errors, e.g., when some
resources are not released correctly. In addition, this will print out
a backtrace automatically if SIGSEGV is received.
2009-12-19 18:40:54 +02:00