Commit graph

50 commits

Author SHA1 Message Date
Benjamin Berg
99eb150deb tests: Test p2p_long_listen longer than remain-on-channel
This tests an error, where the p2p_long_listen information from the
wrong device was used internally in wpa_supplicant when using the
separate P2P Device interface.

Signed-off-by: Benjamin Berg <bberg@redhat.com>
2020-01-04 23:07:31 +02:00
Jouni Malinen
1f8fc6bebb tests: Fix p2p_stop_find() calls in discovery
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-19 00:21:47 +03:00
Jouni Malinen
fab49f6145 tests: Python coding style cleanup (pylint3 bad-whitespace)
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-16 18:52:09 +02:00
Jouni Malinen
8aacbc1fb7 tests: P2P device discovery and p2p_find restart
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-14 20:41:51 +02:00
Jouni Malinen
52358b08f5 tests: P2P device discovery and peer changing device name
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-11 12:45:08 +02:00
Jouni Malinen
82fff2c711 tests: P2P provision discovery while GO/CLI
These test cases verify that there is no duplicate processing of P2P
Action frames while operating in a P2P group.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-03 10:58:39 +02:00
Jouni Malinen
a39a54517a tests: Long P2P_LISTEN and offchannel TX
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-27 00:43:27 +03:00
Jonathan Afek
9fd6804d61 tests: Mark 525 tests as remote compatible
After successfully passing the 525 tests on a remote setup mark the
tests as remote compatible.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:47:37 +03:00
Jouni Malinen
596a3fef83 tests: Use \t instead of \n in discovery_ctrl_char_in_devname
This is needed to allow the SET command to be modified to reject newline
characters.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-02 11:08:25 +03:00
Ilan Peer
d4b521a38b tests: Handle different delays in discovery_and_interface_disabled
Test different delay intervals between the INTERFACE_DISABLED event
and the INTERFACE_ENABLED event for discovery_and_interface_disabled.

Previously, only a delay of 1 second was used, in which case the
scan results for the P2P_FIND operation were received after the
interface was enabled again, and the case the scan results were
received while the interface was disabled was not covered.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-03-03 17:10:26 +02:00
Jouni Malinen
8251be17be tests: Speed up discovery_group_client and nfc_p2p_client
There is no need for these to go through a full scan when the GO
operating channel is known.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-01-06 18:56:31 +02:00
Jouni Malinen
de8a45b6ce tests: Make P2P discovery on non-social channel cases more robust
The test cases discovery_ctrl_char_in_devname and discovery_group_client
tried to allow three P2P_FIND instances to be used before reporting an
error. However, this did not really work properly since the second and
third attempts would likely fail to start the initial special P2P_FIND
scan due to an already ongoing p2p_scan operation. Fix this by stopping
the previous P2P_FIND and waiting for the scan to complete if a retry is
needed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-01-04 23:25:26 +02:00
Jouni Malinen
700c5d0b16 tests: P2P_LISTEN immediately followed by P2P_FIND
This verifies that the previous commit works correctly by forcing a
P2P_LISTEN command execution to be interupted by a P2P_FIND command
timed in a manner that forces it to show up before the kernel ROC has
started for the Listen.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-31 00:37:45 +02:00
Jouni Malinen
3bba9c71c5 tests: P2P device discovery after fragmented GAS/ANQP exchange
This verifies cfg80211/mac80211 offchannel TX cancellation steps.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 12:37:12 +02:00
Jouni Malinen
7f2fea59ea tests: P2P device discovery and control character in Device Name
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-26 23:43:45 +02:00
Jouni Malinen
926404a6b2 tests: WPS config method update for WPS and P2P
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 21:58:18 +03:00
Jouni Malinen
24b7f2822e tests: More WPS/HTTP test coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-31 17:25:20 +03:00
Jouni Malinen
f751368ec3 tests: Make discovery_auto more robust
This test case could fail if there were old BSS entries remaining in
cfg80211 scan results. That happened, e.g., when running test cases in
the following sequence: "discovery_social_plus_one discovery_auto".

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:45:14 +03:00
Ilan Peer
4ef05faf43 tests: Modify test_p2p_discovery to use global and group interfaces
Modify the tests in test_p2p_discovery to use the global
control interface and group interface.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-07 15:37:13 +02:00
Ilan Peer
e9986d8b0b tests: Modify test_p2p_discovery to use global control interface
1. Modify discovery_stop to use global control interface when calling
   P2P_FLUSH.
2. Modify p2p_listen_and_offchannel_tx to use the global control
   interface when waiting for P2P PD event.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:48:40 +02:00
Ilan Peer
098a687ffb tests: Use global control interface in discovery_dev_id
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:38:10 +02:00
Jouni Malinen
2acd2985c6 tests: P2P_PROV_DISC error case
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 16:30:27 +02:00
Jouni Malinen
5f35a5e27f tests: Add wait_connected() and wait_disconnected() helpers
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:10:09 +02:00
Jouni Malinen
ed930f064c tests: P2P_LISTEN and scan
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-19 23:17:06 +02:00
Jouni Malinen
7c5c1ba7b4 tests: P2P_LISTEN behavior with offchannel TX
This verifies that offchannel TX (PD in this specific case) does not
stop ongoing long P2P_LISTEN operation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:41:40 +02:00
Jouni Malinen
7b7b201785 tests: Additional P2P_PEER coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-10 00:46:11 +02:00
Jouni Malinen
ca9b78add8 tests: Additional coverage for P2P_PROV_DISC
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 21:13:17 +02:00
Jouni Malinen
7457c63538 tests: Additional P2P_FIND parameter coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 17:56:47 +02:00
Jouni Malinen
70892f697f tests: P2P_STOP_FIND/P2P_FLUSH to ignore new results
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-31 00:50:01 +02:00
Jouni Malinen
7c33a65671 tests: P2P_PROV_DISC auto
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-28 18:56:06 +03:00
Jouni Malinen
d6df0d7e62 tests: Verify that sec_dev_type gets reported for P2P peer
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-08-27 16:22:53 +03:00
Jouni Malinen
33714def3a tests: Verify P2P_FIND operation when interface gets disabled
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-15 21:35:09 +03:00
Jouni Malinen
54c20c9b43 tests: Make discovery_group_client more robust
Allow three P2P_FIND attempts for discovering the GO on a non-social
channels since the single Probe Response frame can be missed easily
under heavy CPU load.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 18:38:11 +03:00
Jouni Malinen
d7fb9e4819 tests: Fix progressive p2p_find to actually use progressive part
It turned out that the initial test case found the GO based on the
initial full scan instead of the progressive search part. Fix this by
started the GO only after the initial full scan.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-15 01:16:32 +03:00
Jouni Malinen
5070b14a51 tests: p2p_find with progressive scan
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
b1d5134e5b tests: P2P_LISTEN with timeout
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:52 +03:00
Jouni Malinen
26e0c68f10 tests: P2P PD retries and timeout
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 22:23:52 +02:00
Jouni Malinen
5be9dcbb86 tests: Remove unnecessary interpreter line from most python files
Only run-tests.py is actually executed, so there is no need to specify
the interpreter in all the helper files and test script files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 20:21:53 +02:00
Jouni Malinen
da63ee073f tests: Add more time for P2P discovery tests
It looks like some of the discovery_* test cases have been failing every
now and then on the virtual server and the one second timeout could have
been a bit too short to cover some possible timing cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-17 11:42:43 +02:00
Jouni Malinen
c70ebce0ba tests: P2P device discovery filtering on Device ID and Device Type
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 22:25:58 +02:00
Jouni Malinen
9a170ed244 tests: Add some coverage for Device Discoverability exchange
This is not really perfect, but something to get a bit more testing
coverage.. For proper discoverability mechanism validation, the P2P
client would need to go to sleep to avoid acknowledging the GO
Negotiation Request frame. Offchannel Listen mode operation on the P2P
Client with mac80211_hwsim is apparently not enough to avoid the
acknowledgement on the operating channel, so need to disconnect from the
group which removes the GO-to-P2P Client part of the discoverability
exchange in practice.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-01 17:37:08 +02:00
Jouni Malinen
c9aa430896 tests: Split run-tests.py logger info into per test case files
The run-tests.py -l argument does not take an argument value anymore.
Instead, debug output is directed to a separate file <test>.log for each
test case.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 12:51:08 +02:00
Jouni Malinen
0fa28afe35 tests: Use wpa_supplicant global control interface for P2P
This allows more consistent interface to be used regardless of which
P2P driver design is used (especially for P2P management operations
over netdev vs. dedicated P2P_DEVICE).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-01 00:36:33 +03:00
Jouni Malinen
fde43cddb9 tests: Fix test_discovery to force full device discovery
P2P_PROV_DISC fails if the peer is not fully discovered and the previous
version of the test cases did not force this (i.e., it could have
started PD just based on having seen a Probe Request frame from the
peer).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 20:31:22 +02:00
Jouni Malinen
5924d4c105 P2P: Add a test case for discovering a P2P client in a group
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 20:17:11 +02:00
Jouni Malinen
b12b7c7a1f tests: Make test_discovery report PD failures with more detail
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 16:10:04 +02:00
Jouni Malinen
894541ea9c tests: Get rid of the unnecessary add_tests() functions
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 21:03:55 +02:00
Jouni Malinen
4441b9d571 tests: Use social channel scan to speed up tests
The discovery and group formation test cases do not need to run the full
scan as the first step, so get rid of it to make the tests complete more
quickly.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-18 17:36:12 +02:00
Jouni Malinen
47c34473f9 tests: Give document string for each test case as a description
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-17 11:19:24 +02:00
Jouni Malinen
5743006d36 tests: Add P2P device discovery and provision discovery test case
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-17 10:58:48 +02:00