Commit graph

24 commits

Author SHA1 Message Date
Jouni Malinen
c1714ec08c tests: ROAM command failure cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-03 18:09:57 +02:00
Jouni Malinen
82e64f9b90 tests: Roam between two APs based on driver signal level override
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-02 20:38:04 +02:00
Jouni Malinen
938c6e7b3d tests: Wait for AP-STA-CONNECT before running connectivity test
When going through 4-way handshake, the station side reports
CTRL-EVENT-CONNECTED after having sent out EAPOL-Key msg 4/4. The AP
side reports AP-STA-CONNECT after having completed processing of this
frame. Especially when using UML with time travel, it is possible for
the connectivity test to be started before the AP side has configured
the pairwise TK if the test is triggered based on CTRL-EVENT-CONNECTED
instead of AP-STA-CONNECT.

Add explicit wait for AP-STA-CONNECT in some of these cases to reduce
likelihood of reporting failures for test cases that are actually
behaving as expected. This shows up with "dev1->dev2 unicast data
delivery failed" in the test log.

Do the same before requesting reauthentication from the station side
since that has a similar issue with the EAPOL-Start frame getting
encrypted before the AP is ready for it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-05 00:10:32 +03:00
Jouni Malinen
fab49f6145 tests: Python coding style cleanup (pylint3 bad-whitespace)
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-16 18:52:09 +02:00
Jouni Malinen
58be42b264 tests: Remove trailing semicolons from python code
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-02 12:10:53 +02:00
Andrei Otcheretianski
16b5413f2b tests: Make ap_reconnect_auth_timeout test more robust
This test starts two identical APs and assumes a connection to the first
one, though it is not necessary true. Fix that by starting the second AP
only after the connection is established.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2018-10-16 12:49:11 +03:00
Mikael Kanstrup
7137c7daee tests: Add testcase for reconnect failure due to auth timeout
Add testcase to verify a failed reconnect attempt due to authentication
timeout blacklists the correct AP. Driver capabilities are forced to
non-SME and driver roaming (BSS selection) mode.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-09-23 17:36:55 +03:00
Mikael Kanstrup
d258c70f96 tests: Add testcase for (reassoc) roam failure due to auth timeout
Add testcase to verify failed roaming attempt due to authentication
timeout blacklists the correct AP. Roaming attempt is performed
with the reassociate command and bssid_set=1. Driver capabilities
are forced to non-SME and driver roaming (BSS selection) mode.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-09-23 17:36:55 +03:00
Jouni Malinen
bc6e32880f tests: Remove extra semicolons from python scripts
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jonathan Afek
9fd6804d61 tests: Mark 525 tests as remote compatible
After successfully passing the 525 tests on a remote setup mark the
tests as remote compatible.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:47:37 +03:00
Jonathan Afek
fb120f1652 tests: Remove unused import subprocess
Number of files imported subprocess without using anything from subprocess.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:10:35 +03:00
Jouni Malinen
8f5abdb874 tests: More coverage in ap_reassociation_to_same_bss
The extra wait forces the special reattach-scan case to be reached in
wpa_supplicant_scan().

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-28 23:28:15 +03:00
Jouni Malinen
0663ae22ff tests: Do not use tabs for indentation
Be more consistent with indentation (always uses spaces in Python
files).

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-25 00:19:40 +03:00
Ilan Peer
fed0a9f519 tests: Add couple of roam failure tests
1. Fail roaming to an AP which exceeded its number of allowed stations.
2. Fail roaming due to passphrase mismatch.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-04-24 22:56:39 +03:00
Janusz Dziedzic
8b8a1864ff tests: Pass full apdev to add_ap() function (1)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (1) converts the cases where apdev[#]['ifname'] was used as
the argument to hostapd.add_ap().

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:45:57 +03:00
Jouni Malinen
5a38a7fe43 tests: Roam between two WPA2-PSK APs and try to hit a disconnection race
This is a regression test case for hostapd bug where the
disconnection/deauthentication TX status callback timeout could be
forgotten after new association if no ACK frame was received and the STA
managed to reconnect within two seconds.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-01-15 19:34:58 +02:00
Jouni Malinen
5f35a5e27f tests: Add wait_connected() and wait_disconnected() helpers
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:10:09 +02:00
Jouni Malinen
a8375c94c0 tests: Pass wpas/hapd instance to test_connectivity()
This makes it easier to replace data connectivity testing to use
something else than local hwsim_test binary on the controller device.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 17:54:49 +03:00
Jouni Malinen
a567aae4a1 tests: Roaming policy change with the bssid parameter
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-11 15:59:42 +03:00
Jouni Malinen
99cd77a8c5 tests: Verify reassociate-to-same-BSS commands
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-11 20:08:18 +02:00
Jouni Malinen
5be9dcbb86 tests: Remove unnecessary interpreter line from most python files
Only run-tests.py is actually executed, so there is no need to specify
the interpreter in all the helper files and test script files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 20:21:53 +02:00
Jouni Malinen
c9aa430896 tests: Split run-tests.py logger info into per test case files
The run-tests.py -l argument does not take an argument value anymore.
Instead, debug output is directed to a separate file <test>.log for each
test case.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 12:51:08 +02:00
Jouni Malinen
ae3ad3284a tests: Pass AP devices to test cases
This removes hardcoded assumptions about AP interfaces from test_*.py.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:31 +03:00
Jouni Malinen
5126138c9e tests: Add roaming test cases
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 11:28:39 +02:00