Commit graph

129 commits

Author SHA1 Message Date
Jouni Malinen
54c20c9b43 tests: Make discovery_group_client more robust
Allow three P2P_FIND attempts for discovering the GO on a non-social
channels since the single Probe Response frame can be missed easily
under heavy CPU load.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 18:38:11 +03:00
Jouni Malinen
655bc8bfd6 tests: Make FT test cases more robust
Scan explicitly for the AP that may be started during the test case
execution. This is needed to work around issues where under heavy CPU
load, the single active scan round may miss the delayed Probe Response
from the second AP. In addition, check for ROAM/FT_DS failures to be
able to report errors more clearly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:59 +03:00
Jouni Malinen
841bed04de tests: Make HS 2.0 test cases more robust
Scan explicitly for the AP that may be started during the test case
execution. This is needed to work around issues where under heavy CPU
load, the single active scan round may miss the delayed Probe Response
from the second AP.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:49 +03:00
Jouni Malinen
c126cb4d1c tests: Make pmksa_cache_on_roam_back more robust
The single channel scan while associated to another AP and immediately
after starting the second AP can miss the Probe Response frame
especially under heavy CPU load. Avoid false error reports by allowing
multiple scan rounds to be performed. wpas_ctrl_bssid_filter is also
modified to take into account different get_bss() behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:45 +03:00
Jouni Malinen
521b7e7925 tests: Verify global control interface before starting each test
This allows control interface issues to be caught in a bit more readable
way in the debug logs. In addition, dump pending monitor socket
information more frequently and within each test case in the log files
to make the output clearer and less likely to go over the socket buffer
limit.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-29 15:20:23 +03:00
Jouni Malinen
26cf800d11 tests: id_str in network configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
bd6bb3e37b tests: HT 20/40 co-ex functionality during BSS lifetime
Verify that AP acts on 40 MHz intolerant STA association/disassociation
and on 20/40 co-ex report indicating 40 MHz intolerant AP showed up and
removed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-29 12:52:10 +03:00
Jouni Malinen
117caa4a0c tests: wpa_supplicant configuration file reading/writing
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-16 01:45:13 +03:00
Jouni Malinen
bdc4476476 tests: P2P group formation using parameters from persistent group
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-15 01:16:32 +03:00
Jouni Malinen
08429720a7 tests: HT capability overrides
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
5070b14a51 tests: p2p_find with progressive scan
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
543f9f7ead tests: auto_interworking=1
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
b3ec107c8b tests: BSS_EXPIRE_COUNT/AGE
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:52 +03:00
Jouni Malinen
31ec9faf47 tests: bgscan test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:52 +03:00
Jouni Malinen
f44c45ac7f tests: Verify STATUS-WPS passphrase on GO
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-07 00:56:04 +03:00
Jouni Malinen
861671b6ca tests: Use random WPS PIN
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-07 00:56:04 +03:00
Jouni Malinen
538da4f4d2 tests: TDLS setup failure due to BSSID mismatch
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-05 20:42:12 +03:00
Jouni Malinen
ca4fd18290 tests: Speed up IBSS test using single channel scan on SELECT_NETWORK
This removes unnecessary waits and adds test coverage for SELECT_NETWORK
freq parameter.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-04 23:13:49 +03:00
Jouni Malinen
aa45859eba tests: Extend wpas_ctrl_cred to cover most cred block operations
This verifies the new cred modification events and GET_CRED.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-04 22:50:46 +03:00
Jouni Malinen
145f35bf30 tests: Verify HT/VHT required rejection
Previously, only the case of STA supporting HT/VHT was tested. Now both
cases are verified.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-23 19:49:12 +02:00
Jouni Malinen
3b80894541 tests: Negative FT RRB test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-23 19:28:53 +02:00
Jouni Malinen
44bb91066b tests: wpa_supplicant MIB command
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-16 00:18:03 +02:00
Jouni Malinen
fb5c8cea95 tests: Supplicant-enforced PTK rekey
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-16 00:13:23 +02:00
Jouni Malinen
daf3806d1d tests: Protocol tests for unexpected/invalid GO Neg Resp
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-09 01:18:42 +02:00
Jouni Malinen
08e4bd8751 tests: PD-before-GO-Neg workaround
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-05 12:00:20 +02:00
Jouni Malinen
e2afdef223 tests: Verify excluded_ssid with all credential types
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:34 +02:00
Jouni Malinen
9714fbcdcc tests: HS 2.0 minimum bandwidth policy
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:33 +02:00
Jouni Malinen
a96066a5d3 tests: Verify cred vs. network block priority selection
This verifies that 'INTERWORKING_SELECT auto' is able to pick the
correct network based on priority configuration when connected to a
lower priority network.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-27 14:17:31 +02:00
Jouni Malinen
1815317906 tests: Verify req_conn_capab as cred parameter
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-27 00:49:52 +02:00
Jouni Malinen
5f1e31cfc8 tests: Add update_identifier to one of the HS 2.0 test cases
This allows debug logs to be used to verify byte order in the
PPS MO ID fields.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
19839f8efc tests: HS 2.0 maximum BSS Load constraint
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
2253ea44c2 tests: HS 2.0 roaming partner preference
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
078683ac2b tests: Verify multi-cred sp_priority use
test_ap_hs20_multi_cred_sp_prio verifies that two credentials
provisioned by a single SP are selected properly based on sp_priority
when a single BSS matches both credentials.
test_ap_hs20_multi_cred_sp_prio2 does the same when there a separate BSS
for each credential.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:25 +02:00
Jouni Malinen
d369bdcad9 tests: Clear pmf parameter on reset()
This is in preparation of removing pmf parameter reset on the FLUSH
command.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-26 01:24:22 +02:00
Jouni Malinen
12c587a517 tests: Verify domain_suffix_match in a cred block
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-25 23:40:29 +02:00
Jouni Malinen
b2210bd289 tests: Stop WPS ER on station reset
This seems to be needed in some cases to avoid issues in test cases that
assume there are no other ERs running.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-24 13:56:42 +02:00
Jouni Malinen
5be9dcbb86 tests: Remove unnecessary interpreter line from most python files
Only run-tests.py is actually executed, so there is no need to specify
the interpreter in all the helper files and test script files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 20:21:53 +02:00
Jouni Malinen
6f939e591e tests: Convert connect() to use kwargs
This makes it more convenient to add new network block parameters.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 21:58:09 +02:00
Jouni Malinen
242219c563 tests: Set dh_file on EAP client
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 10:42:56 +02:00
Jouni Malinen
e01929c668 tests: Report unexpected STATUS lines instead of stopping
It looks like get_status() has failed in some test runs because of a
STATUS command returning an line without '=' on it. Instead of stopping
there on exception, report the unexpected line in the log and ignore it
to allow test to continue.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-04 13:23:35 +02:00
Jouni Malinen
ca5b81a5bb tests: wpa_supplicant ctrl_iface
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-04 13:10:57 +02:00
Jouni Malinen
e1a5e09ab7 tests: AP mode operations with wpa_supplicant
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-04 13:10:57 +02:00
Jouni Malinen
da10266224 tests: WEP
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:10:57 +02:00
Jouni Malinen
c9dc56231b tests: Add test cases for P2P+NFC
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 22:08:13 +02:00
Jouni Malinen
b21df6e779 tests: Run dump_monitor() again if scan was pending
In addition to running the FLUSH command again, the pending monitor
interface events need be cleared in case the driver was running a scan
when reset() is called. This avoids issues, e.g., with discovery_dev_id
failing due to an unexpected P2P-DEVICE-FOUND event that was generated
by the pending scan operation that had not yet complete when the first
dump_monitor() call in reset() happened.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-15 00:09:56 +02:00
Jouni Malinen
7559ad7af6 tests: Double the connection timeout for EAP cases
It looks like slow virtual machines may have issues to complete some EAP
authentication cases (e.g., EAP-EKE in ap_ft_eap) within the 10 second
timeout under load. Double the timeout to avoid incorrect test failures.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-13 20:47:01 +02:00
Jouni Malinen
c57c1ed6b3 tests: Clear data from ongoing scan on reset()
It was possible for the previous test case to leave unexpected BSS or
P2P peer table entries if a scan was in progress when the FLUSH command
was used. This could result in test failures, e.g., when running
discovery_dev_type_go followed by discovery_group_client where a P2P
peer was discovered on another channel at the end of the former test
case from a scan that was running durign the FLUSH operation that was
supposed to remove all P2P peers. This could result in
discovery_group_client failing due to dev[2] trying to send the
discoverability frame on incorrect channel (the one learned in the
previous test case) since discover_peer() skipped a new device
discovery. Fix this by running FLUSH operation again if a pending scan
operation is detected during the first FLUSH operation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-13 20:26:22 +02:00
Jouni Malinen
c70ebce0ba tests: P2P device discovery filtering on Device ID and Device Type
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 22:25:58 +02:00
Jouni Malinen
d4c7a2b9e6 tests: EAP-TLS with OCSP
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 17:45:56 +02:00
Jouni Malinen
2d10eb0efd tests: PKCS#12 use for EAP-TLS
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-08 17:18:22 +02:00