Commit graph

15298 commits

Author SHA1 Message Date
Edayilliam Jayadev
bf185bfd5d QCA vendor attributes to indicate BW-based agile spectral capability
Some chipsets don't have the capability to run agile spectral scan with
160/80+80 MHz modes. Add separate agile spectral scanning capability
flags for 160, 80+80, and non-160 MHz modes to cover such cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Sunil Dutt
1317ea2c0e nl80211: Allow external auth based on SAE/FT-SAE key mgmt
In the SME-in-driver case, wpa_supplicant used only the selected SAE
auth_alg value as the trigger for enabling external authentication
support for SAE. This prevented the driver from falling back to full SAE
authentication if PMKSA caching was attempted (Open auth_alg selected)
and the cached PMKID had been dropped.

Enable external auth based on SAE/FT-SAE key_mgmt, rather than doing
this based on SAE auth_alg, so that the driver can go through full SAE
authentication in cases where PMKSA caching is attempted and it fails.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Dedy Lansky
cdb5774f42 FST: Update FST about MAC address change
Notify FST module upon MAC address change. FST module will update the
Multiband IE accordingly.

Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
2019-10-15 15:39:22 +03:00
Andrei Otcheretianski
49e95ee1ee AP: Publish only HE capabilities and operation IEs on 6 GHz band
When operating on the 6 GHz band, add 6 GHz Operation Information inside
the HE Operation element and don't publish HT/VHT IEs.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>

- Replace HOSTAPD_MODE_IEEE80211AX mode checks with is_6ghz_op_class()

Signed-off-by: Vamsi Krishna <vamsin@codeaurora.org>
2019-10-15 15:39:22 +03:00
Andrei Otcheretianski
d7c2c5c98c AP: Add initial support for 6 GHz band
Add support for new hardware mode for 6 GHz band. 6 GHz operation is
defined in IEEE P802.11ax/D4.3. 6 GHz band adds global operating classes
131-135 that define channels in frequency range from 5940 MHz to 7105
MHz.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>

- Remove HOSTAPD_MODE_IEEE80211AX mode
- Replace check for HOSTAPD_MODE_IEEE80211AX with is_6ghz_freq()
- Move center_idx_to_bw_6ghz() to ieee802_11_common.c file

Signed-off-by: Vamsi Krishna <vamsin@codeaurora.org>
2019-10-15 15:39:22 +03:00
Liangwei Dong
a5b2faa714 AP: Add op_class config item to specify 6 GHz channels uniquely
Add hostapd config option "op_class" for fixed channel selection along
with existing "channel" option. "op_class" and "channel" config options
together can specify channels across 2.4 GHz, 5 GHz, and 6 GHz bands
uniquely.

Signed-off-by: Liangwei Dong <liangwei@codeaurora.org>
Signed-off-by: Vamsi Krishna <vamsin@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
89450024a8 wpa_supplicant: Pass in operating class for channel validity checks
This is needed to allow the 6 GHz operating classes to be compared
against the driver support channels since the channel numbers are not
really unique identifiers of a channel even within a single band.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
3fa701b5ce tests: SAE PWE derivation methods
Verify behavior with sae_pwe configuration values 0..2, i.e., test the
new hash-to-element mechanism for deriving PWE and negotiation for which
method to use.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
032c8264d4 SAE: Check that peer's rejected groups are not enabled in AP
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
a5dc2a5c1a SAE: H2E version of SAE commit message handling for AP
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
43b20b4370 SAE: Derive H2E PT in AP when starting the AP
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
444d76f74f SAE: Check that peer's rejected groups are not enabled
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
cfe1ea5c9c SAE: H2E version of SAE commit message handling for STA
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
447cd5f2df SAE: Collect list of rejected groups for H2E in STA
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
05a2fb0d11 SAE: Derive H2E PT in STA before connection
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
146889e3ca RSN: Verify RSNXE match between Beacon/ProbeResp and EAPOL-Key msg 3/4
If the AP advertises RSN Extension element, it has to be advertised
consistently in the unprotected (Beacon and Probe Response) and
protected (EAPOL-Key msg 3/4) frames. Verify that this is the case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
3134bb13a8 SAE: Advertise Extended RSN Capabilities when H2E is enabled
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
293a01f3b3 SAE: Handle BSS membership selector indication for H2E-only in STA mode
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
cc0da0ff4c SAE: Advertise BSS membership selector for H2E-only case
If hostapd is configured to enable only the hash-to-element version of
SAE PWE derivation (sae_pwe=1), advertise BSS membership selector to
indicate this.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
85e64e634d SAE: Add sae_pwe configuration parameter for wpa_supplicant
This parameter can be used to specify which PWE derivation mechanism(s)
is enabled. This commit is only introducing the new parameter; actual
use of it will be address in separate commits.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
a36e13a7cd SAE: Add sae_pwe configuration parameter for hostapd
This parameter can be used to specify which PWE derivation mechanism(s)
is enabled. This commit is only introducing the new parameter; actual
use of it will be address in separate commits.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
af4487148a tests: Module test for SAE hash-to-element crypto routines
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
cf84246ebb SAE: Add Rejected Groups element into H2E Commit
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
efd4285299 SAE: Hash algorithm selection for H2E KCK/CN()
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:19 +03:00
Jouni Malinen
aeb022f8e5 SAE: Implement hash-to-element PT/PWE crypto routines
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:01:53 +03:00
Jouni Malinen
ecd7114072 SAE: Parse Rejected Groups element from H2E SAE commit
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-14 19:38:41 +03:00
Jouni Malinen
86f6084862 SAE: Tell sae_parse_commit() whether H2E is used
This will be needed to help parsing the received SAE commit.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-14 19:38:41 +03:00
Jouni Malinen
316156739c SAE: H2E protocol defines
These are the defined values/identifiers for SAE hash-to-element
mechanism from IEEE P802.11-REVmd/D3.0.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-14 19:38:41 +03:00
Jouni Malinen
1766e608ba wolfSSL: Fix crypto_bignum_sub()
The initial crypto wrapper implementation for wolfSSL seems to have
included a copy-paste error in crypto_bignum_sub() implementation that
was identical to crypto_bignum_add() while mp_sub() should have been
used instead of mp_add().

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-14 19:38:41 +03:00
Jouni Malinen
2a1c84f4e5 crypto: Add more bignum/EC helper functions
These are needed for implementing SAE hash-to-element.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-14 19:38:41 +03:00
Jouni Malinen
960cfee506 tests: PMF AP sending valid deauth/disassoc without dropping SA
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-11 18:18:43 +03:00
Jouni Malinen
34a9cd8ffa tests: WPA2-PSK PMF AP dropping SA
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-11 17:53:04 +03:00
Jouni Malinen
131c2600f4 tests: sigma_dut DPP TCP Enrollee as initiator
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-11 13:27:49 +03:00
Jouni Malinen
377d5f7cc2 tests: sigma_dut DPP TCP Configurator (Controller) as responder
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-11 13:07:39 +03:00
Jouni Malinen
9c08bfbd91 DPP: Fix confusing debug entry from Configurator
The logic for displaying the message about no configuration being
available for the Enrollee was reversed when support for multiple Config
Objects was added. This was supposed to be shown only if the first
Config Object fails (i.e., when no configuration is available); not when
second attempt fails (since the first one had already been successful in
that case).

Fixes: 7eb06a3369 ("DPP2: Allow multiple Config Objects to be build on Configurator")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-11 13:04:42 +03:00
Jouni Malinen
d905c8f7a7 tests: sigma_dut controlled SAE association with PMKID
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-10 16:21:10 +03:00
Jouni Malinen
4dda07ba98 tests: sigma_dut controlled AP with SAE Confirm immediate
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-10 15:56:01 +03:00
Jouni Malinen
8a9658dbb5 tests: SAE and AP sending Confirm message without waiting STA
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-10 15:42:11 +03:00
Jouni Malinen
f7fe055224 SAE: Allow AP behavior for SAE Confirm to be configured
hostapd is by default waiting STA to send SAE Confirm before sending the
SAE Confirm. This can now be configured with sae_confirm_immediate=1
resulting in hostapd sending out SAE Confirm immediately after sending
SAE Commit.

These are the two different message sequences:

sae_confirm_immediate=0
STA->AP: SAE Commit
AP->STA: SAE Commit
STA->AP: SAE Confirm
AP->STA: SAE Confirm
STA->AP: Association Request
AP->STA: Association Response

sae_confirm_immediate=1
STA->AP: SAE Commit
AP->STA: SAE Commit
AP->STA: SAE Confirm
STA->AP: SAE Confirm
STA->AP: Association Request
AP->STA: Association Response

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-10 15:38:26 +03:00
Jouni Malinen
d6a7de60c8 wpa_cli: Clean up unnecessarily complex CONFIG_MESH use
There is no need for #ifdef/#else/#endif construction in
network_fields[] to cover "mode" (which is completely independent of
CONFIG_MESH) or two separate conditional blocks for mesh related network
fields, so move these into a single conditionally included block.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-07 17:20:41 +03:00
Alexei Avshalom Lazar
8b426ab1e7 wpa_supplicant: Pass AP mode EDMG config to hostapd struct
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 17:20:41 +03:00
Alexei Avshalom Lazar
a82aee1f40 wpa_supplicant: Add support for EDMG channels
As part of a connection request, set EDMG parameters for the driver to
use in the association. The EDMG parameters are based on EDMG IE
received from the AP's Probe Response frames, the driver's EDMG
capability, and the EDMG configuration from the configuration.

As part of starting an AP, set EDMG parameters for the driver to use for
AP operation. The EDMG parameters are based on the driver's EDMG
capability and the EDMG configuration from the configuration.

This implementation is limited to CB2 (channel bonding of 2 channels)
and the bonded channels must be adjacent, i.e., the supported values for
edmg_channel are 9..13.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 17:20:41 +03:00
Alexei Avshalom Lazar
35aed771f9 Indicate EDMG in scan results
Add [EDMG] flag to scan results.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 17:20:41 +03:00
Alexei Avshalom Lazar
f6f8c6ade9 AP: Show EDMG channel info in STATUS output
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 17:20:41 +03:00
Alexei Avshalom Lazar
241dd76cfd hostapd: Check EDMG configuration against capability
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 17:20:41 +03:00
Alexei Avshalom Lazar
dc3457cc4a hostapd: Check usability of EDMG channel
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 17:02:12 +03:00
Alexei Avshalom Lazar
bebd91e9c4 Add EDMG parameters to set_freq functions
This updates the frequency parameter setting functions to include
argument for EDMG.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 16:59:23 +03:00
Alexei Avshalom Lazar
fdd0fef2c6 EDMG: Helper functions for parameter encoding/checking
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 16:59:21 +03:00
Alexei Avshalom Lazar
e8ff22f471 wpa_supplicant: Add EDMG channel configuration parameters
Add two new configuration parameters for wpa_supplicant:
enable_edmg: Enable EDMG capability for STA/AP mode
edmg_channel: Configure channel bonding. In AP mode it defines the EDMG
channel to start the AP on. In STA mode it defines the EDMG channel to
use for connection.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 16:50:06 +03:00
Alexei Avshalom Lazar
5c5ff22efc hostapd: Add EDMG channel configuration parameters
Add two new configuration parameters for hostapd:
enable_edmg: Enable EDMG capability for AP mode in the 60 GHz band
edmg_channel: Configure channel bonding for AP mode in the 60 GHz band

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 16:46:29 +03:00