Commit graph

244 commits

Author SHA1 Message Date
Janusz Dziedzic
89b781bc89 hostapd: Use common functions for ctrl_iface
Use the common functions, structures when UNIX socket ctrl_iface used.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:15:05 +02:00
Avraham Stern
c0e2a172a7 hostapd: Add MBO IE to BSS Transition Management Request frame
Add an option to add MBO IE to BSS Transition Management Request frame.
The MBO IE includes the transition reason code, cellular data connection
preference, and, if the disassoc imminent bit is set, it may also
include re-association retry delay. Otherwise, the re-association retry
delay should be set to zero.

The additional BSS_TM_REQ argument uses the following format:
mbo=<reason>:<reassoc delay>:<cell pref>
reason: 0-9
reassoc delay: 0-65535 (seconds; 0 = disabled)
cell pref: 0, 1, 255

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-02-22 19:53:04 +02:00
Avraham Stern
fb9a1c3e28 hostapd: Add MBO IE to Beacon, Probe Response, Association Response
Add MBO IE with AP capability attribute to Beacon, Probe Response, and
(Re)Association Response frames to indicate the AP supports MBO.

Add option to add Association Disallowed attribute to Beacon, Probe
Response, and (Re)Association Response frames. Usage:

SET mbo_assoc_disallow <reason code>

Valid reason code values are between 1-5. Setting the reason code to
0 will remove the Association Disallowed attribute from the MBO IE
and will allow new associations.

MBO functionality is enabled by setting "mbo=1" in the config file.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-02-22 19:53:04 +02:00
Roy Marples
640b0b933a ctype functions require an unsigned char
Ensure that characters are represented as unsigned char when using
isblank() and isspace(). These function take in a "int c" argument, but
it needs to be unsigned for the cases where EOF is not indicated.

Signed-off-by: Roy Marples <roy@marples.name>
2016-02-18 17:39:00 +02:00
Michael Braun
1889af2e0f VLAN: Separate station grouping and uplink configuration
Separate uplink configuration (IEEE 802.1q VID) and grouping of stations
into AP_VLAN interfaces.

The int vlan_id will continue to identify the AP_VLAN interface the
station should be assigned to. Each AP_VLAN interface corresponds to an
instance of struct hostapd_vlan that is uniquely identified by int
vlan_id within an BSS.

New: Each station and struct hostapd_vlan holds a struct
vlan_description vlan_desc member that describes the uplink
configuration requested. Currently this is just an int untagged IEEE
802.1q VID, but can be extended to tagged VLANs and other settings
easily.

When the station was about to be assigned its vlan_id, vlan_desc and
vlan_id will now be set simultaneously by ap_sta_set_vlan(). So
sta->vlan_id can still be tested for whether the station needs to be
moved to an AP_VLAN interface.

To ease addition of tagged VLAN support, a member notempty is added to
struct vlan_description. Is is set to 1 if an untagged or tagged VLAN
assignment is requested and needs to be validated. The inverted form
allows os_zalloc() to initialize an empty description.

Though not depended on by the code, vlan_id assignment ensures:
  * vlan_id = 0 will continue to mean no AP_VLAN interface
  * vlan_id < 4096 will continue to mean vlan_id = untagged vlan id
    with no per_sta_vif and no extra tagged vlan.
  * vlan_id > 4096 will be used for per_sta_vif and/or tagged vlans.

This way struct wpa_group and drivers API do not need to be changed in
order to implement tagged VLANs or per_sta_vif support.

DYNAMIC_VLAN_* will refer to (struct vlan_description).notempty only,
thus grouping of the stations for per_sta_vif can be used with
DYNAMIC_VLAN_DISABLED, but not with CONFIG_NO_VLAN, as struct
hostapd_vlan is still used to manage AP_VLAN interfaces.

MAX_VLAN_ID will be checked in hostapd_vlan_valid and during setup of
VLAN interfaces and refer to IEEE 802.1q VID. VLAN_ID_WILDCARD will
continue to refer to int vlan_id.

Renaming vlan_id to vlan_desc when type changed from int to struct
vlan_description was avoided when vlan_id was also used in a way that
did not depend on its type (for example, when passed to another
function).

Output of "VLAN ID %d" continues to refer to int vlan_id, while "VLAN
%d" will refer to untagged IEEE 802.1q VID.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-02-17 11:46:11 +02:00
Jouni Malinen
a65a9b8d67 hostapd: Add mechanism to track unconnected stations
hostapd can now be configured to track unconnected stations based on
Probe Request frames seen from them. This can be used, e.g., to detect
dualband capable station before they have associated. Such information
could then be used to provide guidance on which colocated BSS to use in
case of a dualband AP that operates concurrently on multiple bands under
the control of a single hostapd process.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 17:11:11 +03:00
Jouni Malinen
137b293963 Remove unnecessary NULL check from LOG_LEVEL handler
cmd cannot be NULL here, so there is no need to check it before calling
os_strlen().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-22 00:22:12 +03:00
Srinivas Dasari
5c4f0511a2 hostapd: Add support to configure debug log level at runtime
Add support to read/configure log_level using hostapd control interface
LOG_LEVEL command similarly to what was already supported in
wpa_supplicant.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-03 17:50:09 +03:00
Jouni Malinen
ff7a4bd13f FST: Do not replace previous attachment
hapd->iface->fst must not be overridden if it is already pointing to FST
instance. Without this, duplicated FST-ATTACH could result in memory
leak and process termination.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-25 19:52:27 +03:00
Jouni Malinen
ceb8a79c33 FST: Use -EINVAL instead of EINVAL as return value
This is more consistent with other error cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-25 19:50:43 +03:00
Jouni Malinen
63e169e149 hostapd: Mark config parameter name const
The functions parsing configuration parameters do not modify the name of
the parameter, so mark that function argument constant. In theory, the
value should also be const, but at least for now, number of the parser
functions end up modifying this to simplify parsing.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-21 13:56:19 +03:00
Anton Nayshtut
748febf344 hostapd: Add DUP_NETWORK global control interface command
This adds a new global control interface command DUP_NETWORK with the
following syntax:

DUP_NETWORK src_ifname dst_ifname param

The currently supported parameters:
  wpa
  wpa_key_mgmt
  wpa_pairwise
  rsn_pairwise
  wpa_passphrase
  wpa_psk

The specified configuration parameter is copied from the source
interface to the destination interface. The main use for this is to
allow cloning of security configuration without having to expose the
keys from the hostapd process.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-21 13:42:16 +03:00
Anton Nayshtut
c497a024a2 hostapd: Introduce hostapd_ctrl_iface_get_key_mgmt()
This function will be used in DUP_NETWORK command implementation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-21 13:33:21 +03:00
Anton Nayshtut
b328145296 hostapd: Introduce hostapd_interfaces_get_hapd()
This function will be used in DUP_NETWORK command implementation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-21 13:24:36 +03:00
Mohammed Shafi Shajakhan
de7581ef68 hostapd: Add current wpa parameter into GET_CONFIG output
This can be used, e.g., by an action script to update new WPS
settings for the AP.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
2015-07-18 00:17:34 +03:00
Jouni Malinen
780753fab2 FST: Clear hostapd fst_ies on FST-DETACH to avoid use of freed memory
This is needed in the corner case of FST-DETACH being used without
stopping the AP instance.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 16:29:20 +03:00
Anton Nayshtut
6990d41a74 hostapd: Add global to local control interface redirection
This patch implements global to local control interface redirection in
the same way as it's done for wpa_supplicant. Any global control
interface command beginning with "IFNAME=..." will be routed to the
corresponding local control interface handler.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 20:21:18 +03:00
Anton Nayshtut
585478e2b9 hostapd: Add hostapd_ctrl_iface_receive_process()
The newly introduced function will be used in followup commits to handle
requests redirected from the global control interface.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 20:21:00 +03:00
Anton Nayshtut
8e9a8b0f8c FST: hostapd control interface
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Anton Nayshtut
ee1e3f57b5 hostapd: Global control interface notifications
This commit implements hostapd global control interface notifications
infrastructure. hostapd global control interface clients issue
ATTACH/DETACH commands to register and deregister with hostapd
correspondingly - the same way as for any other hostapd/wpa_supplicant
control interface.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 12:33:29 +03:00
Jouni Malinen
3722c0f4aa Add EAPOL_SET hostapd command to configure EAPOL parameters
This new control interface command "EAPOL_REAUTH <MAC address>
<parameter> <value>" can be used to implement the IEEE 802.1X PAE
Set Authenticator Configuration operation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-12 11:34:18 +03:00
Jouni Malinen
cfb5c08f21 Add EAPOL_REAUTH hostapd command to trigger EAPOL reauthentication
This new control interface command "EAPOL_REAUTH <MAC address>" can be
used to implement the IEEE 802.1X PAE Reauthenticate operation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-12 11:33:33 +03:00
Jouni Malinen
66f1e078e7 DATA_TEST_TX: Avoid ubsan warning on 0x80<<24 not fitting in int
Use unsigned constant instead of signed to avoid warning with the LSB
being set in an int.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 16:25:06 +03:00
Jouni Malinen
75352270fa Avoid misaligned IPv4 header accesses in DATA_TEST_* commands
The IPv4 header after the Ethernet header is not 32-bit aligned and the
previous version ended up accessing 32-bit members at misaligned
addresses.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 16:25:06 +03:00
Jouni Malinen
2da525651d Add backtrace-based error path testing mechanism
The new TEST_FAIL and GET_FAIL control interface commands can be used
similarly to the earlier TEST_ALLOC_FAIL/GET_ALLOC_FAIL design. The new
version is more generic framework allowing any function to be annotated
for failure testing with the TEST_FAIL() macro. This mechanism is only
available in builds with CONFIG_WPA_TRACE_BFD=y and
CONFIG_TESTING_OPTIONS=y. For other builds, the TEST_FAIL() macro is
defined to return 0 to allow the compiler to remove the test code from
normal production builds.

As the first test site, allow os_get_random() to be marked for failing
based on call backtrace.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-29 23:23:56 +03:00
Jouni Malinen
995a3a06f4 Document the wpa_msg_cb "global" parameter
Instead of an int variable with magic values 0, 1, 2, use an enum that
gives clearer meaning to the values now that the original boolean type
global argument is not really a boolean anymore.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-10 16:02:00 +03:00
Jouni Malinen
9ff8dda12f Add hostapd UPDATE_BEACON ctrl_iface command
This can be used to ask Beacon frames to be updated explicitly, e.g.,
after a dynamic configuration parameter change. This can also be used to
start beaconing on an interface that was started with start_disabled=1.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-09 19:56:32 +02:00
Jouni Malinen
99650cadc9 Add STOP_AP control interface command
This is mainly for testing purposes to allow beaconing to be stopped
without clearing AP state in hostapd.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 13:35:49 +02:00
Jouni Malinen
5e3b5197cc Add Suite B 192-bit AKM
WPA-EAP-SUITE-B-192 can now be used to select 192-bit level Suite B into
use as the key management method.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:43:52 +02:00
Jouni Malinen
a16514516b Add "GET tls_library" to provide information on TLS library and version
This new wpa_supplicant and hostapd control interface command can be
used to determine which TLS library is used in the build and what is the
version of that library.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-12 00:19:21 +02:00
Jouni Malinen
86a7fbb2c1 Verify that eloop_register_read_sock() succeeds for ctrl_iface setup
This allows faster detection of a case where a memory allocation fails
within eloop.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-08 02:34:08 +02:00
Jouni Malinen
a156ffda61 Add support for testing memory allocation failures
The new control interface command TEST_ALLOC_FAIL and GET_ALLOC_FAIL can
now be used to trigger memory allocation failures for testing purposes.
TEST_ALLOC_FAIL sets a failure conditions with
<count>:func[;func][;func]... string and GET_ALLOC_FAIL returns the
current state using the same format. Whenever an allocation is made with
a matching backtrace of calling functions, the count is decremented by
one and once zero is reached, the allocation is forced to fail.

Function names can be prefixed with either '=' or '?' to get different
matching behavior. '=' requires this specific function to be the next
one in the backtrace (i.e., do not skip any other functions in the list
which is the default behavior). '?' allows the function to be optionally
present in the backtrace.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-07 13:19:43 +02:00
Jouni Malinen
a193231dfb Clean up debug prints to use wpa_printf()
This converts most of the remaining perror() and printf() calls from
hostapd and wpa_supplicant to use wpa_printf().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-26 13:20:57 +02:00
Jouni Malinen
2c6411edd0 ERP: Add ERP_FLUSH for hostapd
This can be used to drop any pending ERP key from both the internal AP
authentication server and RADIUS server use of hostapd.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 15:47:04 +02:00
Jouni Malinen
d85e1fc8a5 Check os_snprintf() result more consistently - automatic 1
This converts os_snprintf() result validation cases to use
os_snprintf_error() where the exact rule used in os_snprintf_error() was
used. These changes were done automatically with spatch using the
following semantic patch:

@@
identifier E1;
expression E2,E3,E4,E5,E6;
statement S1;
@@

(
  E1 = os_snprintf(E2, E3, ...);
|
  int E1 = os_snprintf(E2, E3, ...);
|
  if (E5)
	E1 = os_snprintf(E2, E3, ...);
  else
	E1 = os_snprintf(E2, E3, ...);
|
  if (E5)
	E1 = os_snprintf(E2, E3, ...);
  else if (E6)
	E1 = os_snprintf(E2, E3, ...);
  else
	E1 = 0;
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	return -1;
  }
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else if (E6) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	return -1;
  }
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	E1 = os_snprintf(E2, E3, ...);
  }
)
? os_free(E4);
- if (E1 < 0 || \( E1 >= E3 \| (size_t) E1 >= E3 \| (unsigned int) E1 >= E3 \| E1 >= (int) E3 \))
+ if (os_snprintf_error(E3, E1))
(
  S1
|
{ ... }
)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Jouni Malinen
85660d312a Add DATA_TEST_FRAME for testing Data frame processing on AP side
The new hostapd control interface command can be used in automated
testing to verify how AP processes Data frames with arbitrary contents.
This is enabled only in builds with CONFIG_TESTING_OPTIONS=y.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 22:37:05 +02:00
Jouni Malinen
527d2378ac hostapd: Allow DATA_TEST_CONFIG to configure ifname
This allows the device-based data connectivity tests to be extended for
bridge and VLAN interface cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-27 14:02:18 +02:00
Jouni Malinen
a30dff07fb Add BSS_TM_REQ command to send BSS Transition Management Request
hostapd control interface can now be used to request transmission of a
BSS Transition Management Request frame to a specified station.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-22 16:34:34 +02:00
Jouni Malinen
666497c8e6 Suite B: Add AKM 00-0F-AC:11
This adds definitions for the 128-bit level Suite B AKM 00-0F-AC:11. The
functionality itself is not yet complete, i.e., this commit only
includes parts to negotiate the new AKM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 13:20:51 +02:00
Jouni Malinen
4a6cc86272 Add data test functionality
It is now possible to run hwsim_test like data connectivity test through
wpa_supplicant/hostapd control interface if CONFIG_TESTING_OPTIONS=y is
used for the build. Test functionality is enabled/disabled at runtime
with "DATA_TEST_CONFIG <1/0>". The "DATA_TEST_TX <dst> <src> <tos>"
command can be used to request a test frame to be transmitted.
"DATA-TEST-RX <dst> <src>" event is generated when the test frame is
received.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 20:51:45 +03:00
Jouni Malinen
8e3e0b3f57 Report sendto() failures for hostapd ctrl_iface
This makes issues with control interface operations more easily
debuggable (CID 72681, CID 72686).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-11 19:43:26 +03:00
Jouni Malinen
9d4ff04af3 Add external EAPOL transmission option for testing purposes
The new ext_eapol_frame_io parameter can be used to configure hostapd
and wpa_supplicant to use control interface for receiving and
transmitting EAPOL frames. This makes it easier to implement automated
test cases for protocol testing. This functionality is included only in
CONFIG_TESTING_OPTIONS=y builds.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-10 18:40:57 +03:00
Jouni Malinen
10e7948f76 Fix hostapd GET_CONFIG wpa_pairwise_cipher value
Copy-paste error ended up getting rsn_pairwise_cipher value for both
rsn_pairwise_cipher and wpa_pairwise_cipher (CID 72693).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-07 18:40:05 +03:00
Michal Kazior
ccac7c61cf hostapd: Make chan_switch command per-interface not per-BSS
Currently hostapd data structures aren't ready for multi-channel BSSes,
so make the command work now at least with single-channel multi-BSS
channel switching.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
2014-06-28 11:06:44 +03:00
Jouni Malinen
18a8e55fcd Notify STA of disconnection based on ACL change
ap_sta_deauthenticate() does not necessarily send a Deauthentication
frame to the STA. Use ap_sta_disconnect() to drop the association so
that the notification frame goes out.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-30 17:06:34 +03:00
Avraham Stern
3ae8b7b7a2 hostapd: Add vendor command support
Add support of vendor command to hostapd ctrl_iface.
Vendor command's format:
VENDOR <vendor id> <sub command id> [<hex formatted data>]

The 3rd argument will be converted to binary data and then passed as
argument to the sub command.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-03-27 15:28:44 +02:00
Jouni Malinen
be4e5af741 Add SAE and FT-SAE key_mgmt to hostapd GET_CONFIG
These options were missing from the current key_mgmt values.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-22 19:01:34 +02:00
Jouni Malinen
8e1146d9da HS 2.0R2 AP: Add support for deauthentication request
If the RADIUS server includes deauthentication request in Access-Accept,
send a WNM-Notification frame to the station after 4-way handshake and
disconnect the station after configurable timeout.

A new control interface command, WNM_DEAUTH_REQ, is added for testing
purposes to allow the notification frame to sent based on local request.
This case does not disconnect the station automatically, i.e., a
separate control interface command would be needed for that.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:24 +02:00
Jouni Malinen
3fb17a9530 HS 2.0R2 AP: Add WNM-Notification Request for Subscription Remediation
Subscription remediation notification can now be sent from hostapd with:
hostapd_cli hs20_wnm_notif 02:00:00:00:00:00 http://example.com/foo/

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:24 +02:00
Emanuel Taube
e2364d162a hostapd: Deauthenticate clients forbidden by maclist changes
After adding or removing a MAC address from a list, the
corresponding station was not deauthenticated as expected.

Signed-off-by: Emanuel Taube <emanuel.taube@gmail.com>
2014-02-25 16:18:48 +02:00
Jouni Malinen
ea449b5bfe tests: Add a module test integration to hwsim tests
CONFIG_MODULE_TESTS=y build option can now be used to build in module
tests into hostapd and wpa_supplicant binaries. These test cases will be
used to get better testing coverage for various details that are
difficult to test otherwise through the control interface control. A
single control interface command is used to executed these tests within
the hwsim test framework. This commit adds just the new mechanism, but no
module tests are yet integrated into this mechanism.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 13:08:08 +02:00
Jouni Malinen
91226e0d12 WPS: Add testing option to corrupt public key hash
If CONFIG_WPS_TESTING=y is enabled in build configuration, the new
wps_corrupt_pkhash parameter (similar to wps_testing_dummy_cred) can be
used to request public key hash to be corrupted in all generated OOB
Device Password attributes. This can be used for testing purposes to
validate public key hash validation steps.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:44:31 +02:00
Jouni Malinen
3189ca055d WPS NFC: Add AP mode connection handover report
The new NFC connection handover design requires the AP/Registrar to
process the connection handover request message received from the
Enrollee. Add control interface commands for handling this.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
f0cbb986ff Add DRIVER-STATUS command for hostapd
This is just like the same command in wpa_supplicant, i.e., "hostapd_cli
status driver" can be used to fetch information about the driver status
and capabilities.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:12 +02:00
Jouni Malinen
4c03a2b3e1 Make RADIUS server MIB available through control interface
"MIB radius_server" control interface can now be used to fetch the
RADIUS server MIB data from hostapd.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-02 17:19:04 +02:00
Jouni Malinen
8d321a7d4c WNM: Move disassociation imminent sending to wnm_ap.c
This gets all WNM BSS Transition Management frame building and sending
within hostapd into the same location.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-27 19:57:47 +02:00
Jouni Malinen
2025cad9b8 WNM: Move ESS Disassoc Imminent sending to a helper function
This makes it easier to trigger the ESS Disassociation Imminent
operation from different sources.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-12-27 18:48:04 +02:00
Jouni Malinen
93827f456a hostapd: Allow external management frame processing or testing
This enables more convenient protocol testing of station side
functionality in various error cases and unexpected sequences without
having to implement each test scenario within hostapd.
ext_mgmt_frame_handle parameter can be set to 1 to move all management
frame processing into an external program through control interface
events (MGMT-RX and MGMT-TX-STATUS) and command (MGMT_TX).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Andrei Otcheretianski
334bf36ac5 Add chan_switch to ctrl interface of wpa_supplicant and hostapd
Add chan_switch to the control interface of wpa_supplicant and hostapd,
and also to wpa_cli and hostapd_cli.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-11-17 17:12:58 +02:00
Jouni Malinen
8540e0b520 hostapd: Fix DETACH command debug prints to avoid use of freed memory
In case a control interface socket is detached because of sendmsg()
failing for the socket, function call to detach the socket uses a
pointer to the socket information in the structure to be freed. Reorder
code to print socket info before freeing the data to avoid use of freed
memory in case debug prints are enabled.

This is similar to the earlier wpa_supplicant fix in commit
a235aca316.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 01:15:28 +02:00
Jouni Malinen
5ae6449ca2 hostapd: Add ctrl_iface STATUS command
This can be used to fetch runtime information about hostapd interfaces.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
ddf551747c hostapd: Add control interface test commands for radar detection
If hostapd is build with CONFIG_TESTING_OPTIONS=y, the RADAR control
interface command can be used to test hostapd behavior on arbitrary
driver radar events.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 11:31:48 +02:00
Jouni Malinen
3f134b4357 hostapd: Accept RELOG from global control interface
This makes it easier to recycle log file (-f) when no active interface
is in use.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-02 11:52:35 +02:00
Jouni Malinen
0cf0af2e29 WNM: Set Disassoc Imminent flag in ESS Disassoc Imminent frame
The Disassociation Timer field is only valid if Disassoc Imminent is set
to 1.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Kyeyoon Park
c551700f1f Interworking: Add support for QoS Mapping functionality for the AP
This allows QoS Map Set element to be added to (Re)Association Response
frames and in QoS Map Configure frame. The QoS Mapping parameters are
also made available for the driver interface.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Jouni Malinen
2c6f8cf6c8 Replace perror() with wpa_printf(strerror) in ctrl_iface calls
This replaces number of perror() calls with wpa_printf() to get the
error messages embedded within rest of the debug messages in the same
stream instead of pushing these to stderr which may get directed to
another location.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-26 11:46:21 +03:00
Jeffin Mammen
3351a3847c WPS: Add control interface command for fetching latest status
The new wps_get_status command can be used to fetch the result of the
latest WPS operation and the current PBC state from hostapd.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 17:49:01 +03:00
Jouni Malinen
eb4737f6df Fix ESS_DISASSOC ctrl_iface command parser
strchr can return NULL and that needs to be checked instead of what the
pointer could be pointing to.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-25 19:55:32 +03:00
Jouni Malinen
8e1bc70231 WNM: Fix ess_disassoc timeout to be specified in TBTTs
This was previously claimed to be in ms, but the field in BSS Transition
Management Request frame is in number of TBTTs (beacon interval). Use
that unit in the ESS_DISASSOC control interface command to be able to
specify any value and just modify the timeout value to be calculated
based on beacon interval.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-23 16:50:32 +03:00
Jouni Malinen
901d1fe1e5 WNM: Remove PMKSA cache entry on ESS disassoc imminent notification
This is needed to avoid allowing the STA to reconnect using a cached
PMKSA. ESS disassoc imminent notification is normally used to indicate
that the STA session will be terminated and as such, requiring full
authentication through the authentication server after this is needed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-23 16:50:06 +03:00
Kyeyoon Park
d5b559b641 WNM: Add disassociation timeout processing for ESS_DISASSOC
The hostapd_cli ess_disassoc command now takes three arguments (STA MAC
address, timeout in ms, URL) and the STA is disconnected after the
specified timeout.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:13:40 +03:00
Jouni Malinen
47bfe49c31 Add wpa_msg_global() for global events
This function can be used instead of wpa_msg() and wpa_msg_ctrl() to
indicate that an event is not specific to a network interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 14:19:24 +03:00
Jouni Malinen
187f87f04c hostapd: Allow ctrl_iface group to be specified on command line
The new -G<group> command line argument can now be used to set the group
for the control interfaces to enable cases where hostapd is used without
a configuration file and the controlling program is not running with
root user privileges.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 17:09:31 +02:00
Jouni Malinen
e47588279a WPS: Report NFC connection handover completion differently
Instead of reporting only one connection handover message, report
completion of NFC connection handover with carrier record from both the
request and select messages.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-11 18:43:46 +02:00
Jouni Malinen
6772a90ad0 WPS: Add command for fetching carrier record for NFC handover
Control interface command "NFC_GET_HANDOVER_SEL NDEF WPS-CR" can now be
used to fetch WPS carrier record from hostapd.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 17:12:55 +02:00
Jouni Malinen
0282a8c46a Use helper function for writing cipher suite names
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 17:31:36 +02:00
Jouni Malinen
2049a875bc WNM: Additional BSS Transition Management capability
Add some more functionality for BSS Transition Management:
- advertise support for BSS Transition Management in extended
  capabilities element
- add hostapd.conf parameter bss_transition=1 for enabling support
  for BSS Transition Management
- add "hostapd_cli disassoc_imminent <STA> <num TBTTs>" for sending
  disassociation imminent notifications for testing purposes
- wpa_supplicant: trigger a new scan to find another BSS if the
  current AP indicates disassociation imminent (TODO: the old AP needs
  to be marked to use lower priority to avoid re-selecting it)

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-22 20:27:30 +02:00
Pontus Fuchs
5bbf590a58 hostapd: Android: Force group access to ctrl_iface directory
Same fix as d49ea68284 in
wpa_supplicant.

From original commit:

wpa_supplicant is started from /init.*.rc on Android and that seems
to be using umask 0077 which would leave the control interface
directory without group access. This breaks things since Wi-Fi
framework assumes that this directory can be accessed by other
applications in the wifi group. Fix this by adding group access even
if umask value would prevent this.

Signed-hostap: Pontus Fuchs <pontus.fuchs@gmail.com>
2012-12-17 16:30:44 +02:00
Pontus Fuchs
9cbd5845d0 hostapd: Don't chown control interface to root
If ctrl_interface_group in the config file is set hostapd tries to
chown the dir and socket to uid 0. This causes the chown to fail
if hostapd is run as non-root.

Signed-hostap: Pontus Fuchs <pontus.fuchs@gmail.com>
2012-12-17 16:27:04 +02:00
Jouni Malinen
207fb86411 WPS: Remove deprecated UFD config method and OOB ctrl_iface
The UFD (USB flash drive) configuration method was deprecated in WSC
2.0. Since this is not known to be used, remove the UFD implementation
from hostapd and wpa_supplicant to allow the WPS implementation to be
cleaned up. This removes the now unused OOB operations and ctrl_iface
commands that had already been deprecated by the new NFC operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-11 13:01:06 +02:00
Jouni Malinen
9f36eac6e5 WPS: Remove old OOB NFC interface
The old WPS interface for using NFC has no known deployments and even
the binary libraries referenced here are not easily available anymore.
Since the new interface for using NFC with WPS covers the same
functionality, remove the old implementation to clean up WPS
implementation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-10-28 18:20:03 +02:00
Jouni Malinen
eb7719ff22 Add support for using GCMP cipher from IEEE 802.11ad
This allows both hostapd and wpa_supplicant to be used to derive and
configure keys for GCMP. This is quite similar to CCMP key
configuration, but a different cipher suite and somewhat different rules
are used in cipher selection. It should be noted that GCMP is not
included in default parameters at least for now, so explicit
pairwise/group configuration is needed to enable it. This may change in
the future to allow GCMP to be selected automatically in cases where
CCMP could have been used.

This commit does not included changes to WPS or P2P to allow GCMP to be
used.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-29 11:52:15 +03:00
Shan Palanisamy
06bb8c62ff hostapd: Add global ctrl_iface commands for adding/removing interfaces
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-25 13:47:49 +03:00
Shan Palanisamy
7554565299 hostapd: Add ctrl_iface for enabling/reloading/disabling interface
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-25 13:47:36 +03:00
Shan Palanisamy
c90fd48514 hostapd: Add global control interface
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-25 13:47:24 +03:00
Jouni Malinen
986de33d5c Convert remaining SSID routines from char* to u8*
This makes it more explicit that the SSID is not a null terminated
C string.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-07 16:07:25 +03:00
Jouni Malinen
ffdaa05a6b WPS: Add support for NCF password token from AP
The new hostapd ctrl_iface command WPS_NFC_TOKEN can now be used to
manage AP-as-Enrollee operations with NFC password token. WPS/NDEF
parameters to this command can be used to generate a new NFC password
token. enable/disable parameters can be used to enable/disable use of
NFC password token (instead of AP PIN) for external Registrars.

A preconfigured NFS password token can be used by providing its
parameters with new hostapd.conf fields wps_nfc_dev_pw_id,
wps_nfc_dh_pubkey, wps_nfc_dh_privkey, and wps_nfc_dev_pw. This use
will also depend on WPS_NFC_TOKEN enable/disable commands, i.e., the
configured NFS password token is disabled by default.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-28 19:43:29 +03:00
Jouni Malinen
3cf7a59d4f WPS: Add new mechanism for generation NFC configuration token
The new hostapd ctrl_iface command WPS_NFC_CONFIG_TOKEN can now be used
to fetch payload for an NFC configuration token so that an external
program can be used to write this on an NFC tag.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-28 13:25:48 +03:00
Jouni Malinen
bb45b6d79a WPS: Add new mechanism for communicating NFC tag read events
hostapd ctrl_iface can now be used to deliver payload from read
operation of an NFC tag. This allows operations without having to have
low-level NFC code within hostapd. For now, the new wps_nfc_tag_read
command can be used with NFC password tokens for the case where the AP
has an NFC device that is used to read an NFC tag from the station
Enrollee.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-27 21:22:13 +03:00
Ben Greear
9d05374796 Make bind failure messages unique
This helps someone know which part of the code is complaining.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2012-04-06 12:10:36 +03:00
Anirban Sirkhell
4c374cde2f Add wps_cancel for hostapd_cli
Implement wps_cancel for hostapd similarly to how it was already
supported in wpa_supplicant AP mode.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-30 11:11:35 +03:00
Jay Katabathuni
dca30c3fb7 Interworking: Add GAS server support for AP mode
This adds GAS/ANQP implementation into hostapd. This commit brings in
the basic GAS/ANQP functionality, but only the ANQP Capability List
element is supported.

For testing purposes, hostapd control interface SET command can be used
to set the gas_frag_limit parameter dynamically.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-26 22:52:53 +02:00
Jithu Jance
e60b295186 Add wpa_supplicant AP mode STA deauthenticate/disassociate commands
Move disassociate and deauthenticate commands to ctrl_iface_ap.c, so
that they ares accessible for wpa_supplicant AP mode and wpa_cli (with
CONFIG_AP option enabled).

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2012-02-25 17:22:48 +02:00
Shan Palanisamy
9e7d033ef4 hostapd: Make sure ctrl_iface is not initialized multiple times
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-16 19:44:43 +02:00
Shan Palanisamy
31b79e1197 hostapd: Allow config parameters to be set through ctrl_iface
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-16 19:36:48 +02:00
Jouni Malinen
0f3d578efc Remove the GPL notification from files contributed by Jouni Malinen
Remove the GPL notification text from the files that were
initially contributed by myself.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-11 19:39:36 +02:00
Ben Greear
e04a163180 AP: Convert some wpa_printf to wpa_msg/dbg
This generates better log messages when running multiple
interfaces in one process.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2011-12-10 16:28:14 +02:00
Helmut Schaa
8cfa3527e1 Allow MLME frames to be sent without expecting an ACK (no retries)
In some situations it might be benefical to send a unicast frame without
the need for getting it ACKed (probe responses for example). In order to
achieve this add a new noack parameter to the drivers send_mlme callback
that can be used to advise the driver to not wait for an ACK for this
frame.

Signed-hostap: Helmut Schaa <helmut.schaa@googlemail.com>
2011-11-19 19:02:05 +02:00
Jouni Malinen
895c643407 Remove unused header file inclusion
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-17 20:01:19 +02:00
Jouni Malinen
71269b3708 WNM: Add BSS Transition Management Request for ESS Disassoc Imminent
"hostapd_cli ess_disassoc (STA addr) (URL)" can now be used to send
an ESS Dissassociation Imminent notification to the STA. This event
is shown in wpa_supplicant ctrl_iface monitors (e.g., wpa_cli):
"WNM: ESS Disassociation Imminent - session_info_url=http://example.com/session/"
2011-10-16 23:55:34 +03:00
Jouni Malinen
d601247ca9 P2P: Allow WPS_PBC command on GO to select on P2P Device Address
An optional parameter, p2p_dev_addr, can now be given to WPS_PBC
command on P2P GO to indicate that only the P2P device with the
specified P2P Device Address is allowed to connect using PBC. If
any other device tries to use PBC, a session overlap is indicated
and the negotiation is rejected with M2D. The command format for
specifying the address is "WPS_PBC p2p_dev_addr=<address>", e.g.,
WPS_PBC p2p_dev_addr=02:03:04:05:06:07

In addition, show the PBC session overlap indication as a WPS failure
event on an AP/GO interface. This particular new case shows up as
"WPS-FAIL msg=4 config_error=12".
2011-02-07 18:28:36 +02:00
Ben Greear
b41a47c03f hostapd: Allow logging to file
Also supports 'relog' CLI command to re-open the log file.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2011-02-06 20:24:16 +02:00
Jouni Malinen
51e2a27a21 hostapd_driver_ops reduction
set_sta_vlan, get_inact_sec, sta_deauth, sta_disassoc, and sta_remove
to use inline functions instead of extra abstraction.
2010-11-24 15:36:02 +02:00
Jouni Malinen
5bf49c346c Drop local stations on broadcast deauth/disassoc request
When hostapd_cli deauth/disassoc is used with ff:ff:ff:ff:ff:ff
address, drop all local STA entries in addition to sending out the
broadcast deauth/disassoc frame.
2010-11-10 17:09:31 +02:00
Jouni Malinen
acec8d3203 Add ctrl_iface command 'GET version'
This can be used to fetch the wpa_supplicant/hostapd version
string.
2010-10-31 17:07:31 +02:00
Jouni Malinen
450eddcfae hostapd: Add wps_config ctrl_interface command for configuring AP
This command can be used to configure the AP using the internal
WPS registrar. It works in the same way as new AP settings received
from an ER.
2010-10-21 16:49:41 +03:00
Jouni Malinen
2c8a4eef41 WPS: Update Beacon/ProbeResp IE on wps_version_number changes
This test command is supposed to change the WPS version number in all
places immediately, so make sure that the IEs used in management
frames get updated immediately.
2010-10-19 19:57:01 +03:00
Jouni Malinen
088a225586 Fix hostapd_cli get_config not to show key when WPA is disabled
Previously, incorrectly configured passphrase or group cipher type
could be shown even if WPA was disabled.
2010-10-08 17:36:52 +03:00
Jouni Malinen
235f69fcd6 Mark ctrl_iface RX debug for PING commands excessive
This cleans up debug log from unnecessary entries when using
wpa_cli/hostapd_cli or other ctrl_iface monitors that PING
periodically to check connectivity.
2010-09-24 15:50:13 -07:00
Jouni Malinen
403b96fe4f WPS: Add hostapd_cli get_config command
This can be used by a WPS UI to display the current AP configuration.
2010-09-23 12:02:28 -07:00
Jouni Malinen
3981cb3cb8 WPS: Add wps_check_pin command for processing PIN from user input
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
2010-09-23 10:30:52 -07:00
Jouni Malinen
b4e34f2fdf WPS: Make testing operations configurable at runtime
Instead of build time options (CONFIG_WPS_TESTING_EXTRA_CRED and
CONFIG_WPS_EXTENSIBILITY_TESTING), use a single build option
(CONFIG_WPS_TESTING) and runtime configuration of which testing
operations are enabled. This allows a single binary to be used
for various tests.

The runtime configuration can be done through control interface
with wpa_cli/hostapd_cli commands:
Enable extensibility tests:
set wps_version_number 0x57
Disable extensibility tests (WPS2 build):
set wps_version_number 0x20
Enable extra credential tests:
set wps_testing_dummy_cred 1
Disable extra credential tests:
set wps_testing_dummy_cred 0
2010-09-21 19:51:23 -07:00
Jouni Malinen
962473c136 P2P: Add preliminary P2P Manager AP support for hostapd 2010-09-09 07:17:18 -07:00
Jouni Malinen
31fcea931d WPS 2.0: Add support for AuthorizedMACs attribute
Advertize list of authorized enrollee MAC addresses in Beacon and
Probe Response frames and use these when selecting the AP. In order
to provide the list, the enrollee MAC address should be specified
whenever adding a new PIN. In addition, add UUID-R into
SetSelectedRegistrar action to make it potentially easier for an AP
to figure out which ER sent the action should there be multiple ERs
using the same IP address.
2010-09-09 06:07:47 -07:00
Jouni Malinen
5a1cc30f1a WPS: Add support for dynamic AP PIN management
A new hostapd_cli command, wps_ap_pin, can now be used to manage
AP PIN at runtime. This can be used to generate a random AP PIN and
to only enable the AP PIN for short period (e.g., based on user
action on the AP device). Use of random AP PIN that is only enabled
for short duration is highly recommended to avoid security issues
with a static AP PIN.
2010-08-24 16:35:37 +03:00
Jouni Malinen
a33c5f96b8 Fix a typo in Disassociation frame building
This did not really change any behavior since Deauthentication frame
uses the same format.
2010-07-17 20:23:20 -07:00
Jouni Malinen
b91ab76e8c Add test commands for sending deauth/disassoc without dropping state
This can be used to test 802.11w by sending a protected or unprotected
deauth/disassoc frame.

hostapd_cli deauth <dst addr> test=<0/1>
hostapd_cli disassoc <dst addr> test=<0/1>

test=0: unprotected
test=1: protected
2010-03-29 12:01:40 -07:00
Jouni Malinen
90a3206a14 Add deauthenticate/disassociate ctrl_iface commands 2010-03-29 11:14:57 -07:00
Jouni Malinen
f5455a2dbd Verify that os_get_random() success for SA Query id 2010-01-10 22:28:21 +02:00
Jouni Malinen
81f4f6195e Include header files explicitly in *.c, not via header files 2009-12-26 00:31:51 +02:00
Jouni Malinen
6226e38d00 Rename some src/ap files to avoid duplicate file names
Doxygen and some build tools may get a bit confused about same file
name being used in different directories. Clean this up a bit by
renaming some of the duplicated file names in src/ap.
2009-12-26 00:05:40 +02:00
Jouni Malinen
0e2d35c614 Move ctrl_iface_ap.c into src/ap 2009-12-25 12:25:55 +02:00
Jouni Malinen
32da61d9c9 Move wps_hostapd.c into src/ap 2009-12-25 01:26:37 +02:00
Jouni Malinen
1057d78eb8 Move generic AP functionality implementation into src/ap
This code can be shared by both hostapd and wpa_supplicant and this
is an initial step in getting the generic code moved to be under the
src directories. Couple of generic files still remain under the
hostapd directory due to direct dependencies to files there. Once the
dependencies have been removed, they will also be moved to the src/ap
directory to allow wpa_supplicant to be built without requiring anything
from the hostapd directory.
2009-12-25 01:12:50 +02:00
Jouni Malinen
74784010af Remove conditional no-RADIUS build from src/radius
Make it responsibility of the src/radius user to handle conditional
build rules.
2009-12-06 17:53:59 +02:00
Jouni Malinen
4dbfe5c58a Conver hostapd specific files to include common.h
Instead of getting this via hostapd.h, include it as the first
non-system header file in all source code files in the same way as
used in all other files.
2009-11-29 18:46:42 +02:00
Jouni Malinen
4f760fcc7c Fix hostapd wpa_msg() calls ctx for wpa_supplicant AP mode
Need to use wpa_s pointer, not hapd pointer, for these calls.
2009-09-29 21:25:14 +03:00
Jouni Malinen
ded30a6b41 Move STA list ctrl_iface handlers to a separate file
This makes it easier to share the hostapd station table query
functionality with wpa_supplicant AP mode operations.
2009-09-08 12:56:07 +03:00
Jouni Malinen
2678509dec WPS: Store device info and make it available through AP ctrl_iface
Store a copy of device attributes during WPS protocol run and make it
available for external programs via the control interface STA MIB
command for associated stations. This gives access to device name and
type which can be useful when showing user information about associated
stations.
2009-09-07 22:09:13 +03:00
Johannes Berg
fe6bdb777e Replace NEED_MLME with NEED_AP_MLME
This makes it clearer that it's about the AP, not client-side MLME, even
when built into the client (wpa_supplicant).
2009-08-14 20:01:41 +03:00
Jouni Malinen
077a781f7a WPS: Add support for setting timeout for PIN
hostapd_cli wps_pin command can now have an optional timeout
parameter that sets the PIN lifetime in seconds. This can be used
to reduce the likelihood of someone else using the PIN should an
active PIN be left in the Registrar.
2009-05-26 17:44:44 +03:00
Jouni Malinen
617d155547 Add code to re-use an existing ctrl_iface socket file
Port the code from wpa_supplicant to re-use an existing ctrl_iface
socket file if the file does not seem to be in use. This allows
hostapd to recover from unclean shutdown of the control interface.
2009-05-06 11:31:45 +03:00
Jouni Malinen
c51218372f Merge wpa_supplicant and hostapd driver wrapper implementations
This commit merges the driver_ops structures and implementations from
hostapd/driver*.[ch] into src/drivers. This is only an initial step and
there is room for number of cleanups to share code between the hostapd
and wpa_supplicant parts of the wrappers to avoid unnecessary source
code duplication.
2009-04-09 13:40:12 +03:00
Jouni Malinen
75864b7f63 Fix UNIX domain socket address handling to be more portable
Remove all fields before sun_path before printing or comparing sun_path
contents. Using offsetof should be portable. In addition, set sun_len
for FreeBSD.
2009-03-21 22:07:14 +02:00
Jouni Malinen
c5aaa01562 Detach ctrl_iface monitor if the client socket is removed
No need to wait for 10 errors when using UNIX domain socket; we can
detach the client immediately on ENOENT.
2009-03-17 16:56:30 +02:00
Masashi Honma
e1ee6b600b WPS: Add support for NFC out-of-band mechanism
The new file wps_nfc.c and ndef.c implements NFC device independent
operation, wps_nfc_pn531.c implements NFC device dependent operation.

This patch is only for the following use case:
- Enrollee = wpa_supplicant
- Registrar = hostapd internal Registrar

Following NFC methods can be used:
- Enrollee PIN with NFC
- Registrar PIN with NFC
- unencrypted credential with NFC

Encrypted credentials are not supported.

Enrollee side operation:

Registrar side operation:

Example configuration.
CONFIG_WPS=y
CONFIG_WPS_NFC=y
CONFIG_WPS_NFC_PN531=y

I used NFC device "NXP PN531". The NFC device access method is
confidential, so I used outer library. Please download below files from
https://www.saice-wpsnfc.bz/index.php

[WPS NFC Library]
WpsNfcLibrary/WpsNfc.h
WpsNfcLibrary/WpsNfcType.h
WpsNfcLibrary/WpsNfcVersion.h
WpsNfcLibrary/linux/libnfc_mapping_pn53x.dll
WpsNfcLibrary/linux/wpsnfc.dll

[NFC Reader/Writer Kernel Driver]
NFCKernelDriver-1.0.3/linux/kobj/sonyrw.ko

<WiFi test>
The hostapd/wpa_supplicant with this patch passed below tests on
"Wi-Fi WPS Test Plan Version 1.6".
4.2.5 Add device using NFC Method with password token
(I used SONY STA instead of NXP STA.)

4.2.6 Add device using NFC Method with configuration token

5.1.9 Add to AP using NFC Method with password token
through internal registrar
(I used SONY AP instead of NXP AP.)

5.1.10 Add to AP using NFC Method with configuration token
through internal registrar
2009-03-06 16:16:22 +02:00
Jouni Malinen
116f7bb0a3 WPS UFD: Build OOB functionality only if UFD is enabled 2009-02-26 22:10:21 +02:00
Masashi Honma
46bdb83acd WPS: Add UFD support (USBA out-of-band mechanism)
This patch is only for the following use case:
- Enrollee = wpa_supplicant
- Registrar = hostapd internal Registrar

Following UFD methods can be used:
- Enrollee PIN with UFD
- Registrar PIN with UFD
- unencrypted credential with UFD

Encrypted credentials are not supported.

Enrollee side operation:
wpa_cli -i ath0 wps_oob <device type> <mount point> <oob method>
    oob method = pin-e/pin-r/cred

wpa_cli -i ath0 wps_oob ufd /mnt/ pin-r

Registrar side operation:
./hostapd_cli -i ath0 wps_oob <device type> <mount point> <oob method>
    oob method = pin-e/pin-r/cred

hostapd_cli -i ath0 wps_oob ufd /mnt/ cred
2009-02-26 21:57:38 +02:00
Jouni Malinen
42d16805c9 Enable wpa_msg() for hostapd
Use wpa_msg() like wpa_supplicant in order to avoid having to use direct
hostapd_ctrl_iface_send() calls.
2009-01-21 11:45:56 +02:00
Jouni Malinen
8d06da09a4 Move generic definitions away from hostapd.h
This is an initial step in trying to make hostapd.h not needed to be
included in so many files.
2009-01-08 20:14:05 +02:00
Jouni Malinen
88b4b4246d Added ctrl_interface command for sending a SA Query request
This can be useful for testing IEEE 802.11w functionality, so provide
means for manual request to send a SA Query request.
2008-12-30 18:04:29 +02:00
Jouni Malinen
ad08c3633c Added preliminary Wi-Fi Protected Setup (WPS) implementation
This adds WPS support for both hostapd and wpa_supplicant. Both programs
can be configured to act as WPS Enrollee and Registrar. Both PBC and PIN
methods are supported.

Currently, hostapd has more complete configuration option for WPS
parameters and wpa_supplicant configuration style will likely change in
the future. External Registrars are not yet supported in hostapd or
wpa_supplicant. While wpa_supplicant has initial support for acting as
an Registrar to configure an AP, this is still using number of hardcoded
parameters which will need to be made configurable for proper operation.
2008-11-23 19:34:26 +02:00
Jouni Malinen
2fc98d02c1 Simplified RADIUS accounting id usage
Changed accounting_sta_start() to call accounting_sta_get_id()
internally in accounting.c so that external callers do not need to do
anything to allocate unique accounting id. When starting a new session,
a unique identifier is needed anyway, so no need to keep these
operations separate.
2008-11-23 11:12:17 +02:00
Jouni Malinen
6fc6879bd5 Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release 2008-02-27 17:34:43 -08:00