Commit graph

472 commits

Author SHA1 Message Date
Lubomir Rintel
d7591aab85 dbus: Expose availability of SHA384 on D-Bus
This lets us know whether we can attempt to use FT-EAP-SHA384.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2018-11-24 18:18:25 +02:00
Lubomir Rintel
eb7e747931 dbus: Expose availability of FT on D-Bus
This lets us know whether we can attempt to use FT-PSK, FT-EAP,
FT-EAP-SHA384, FT-FILS-SHA256 or FT-FILS-SHA384.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2018-11-24 18:18:25 +02:00
Lubomir Rintel
59d59eb0e0 Revert "D-Bus: Implement Pmf property"
This reverts commit adf8f45f8a.

It is basically all wrong. The Pmf property did exist, with a signature of
"s" as documented in doc/dbus.doxygen. It was synthesized from
global_fields[].

The patch added a duplicate one, with a signature of "u", in violation
of D-Bus specification and to bemusement of tools that are careful
enough:

  $ busctl introspect fi.w1.wpa_supplicant1 /fi/w1/wpa_supplicant1/Interfaces/666
  Duplicate property

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2018-11-24 18:03:55 +02:00
Vasyl Vavrychuk
d53401c54b dbus: Redirect signal processing to the management device if present
This fixes sending of FindStopped, GroupFormationFailure, and
InvitationReceived signals in the case of separate P2P-Device interface.
This extends the coverage of the earlier commit
745d62322b ("dbus: Redirect P2P request to
the managment device if present") to these three functions that were
missing the redirection.

Some wireless controllers might have separate P2P-Device interface, see
as example result of 'iw dev':

phy#0
        Unnamed/non-netdev interface
                ...
                type P2P-device
                ...
        Interface wlp2s0
                type managed
                ...

In this case there is separate 'struct wpa_supplicant' created for this
p2p-dev-* device as result of 'wpa_supplicant_add_iface >
wpas_p2p_add_p2pdev_interface > wpa_supplicant_add_iface'.

This instance of wpa_supplicant is not registered in D-Bus
(wpas_dbus_register_*) since for corresponding P2P device interface flag
'struct wpa_interface > p2p_mgmt' is set.

But this instance is saved in p2p_init_wpa_s and is used for handling
P2P related D-Bus commands. Therefore we should look for D-Bus path in
the parent of p2p_init_wpa_s instance.

Without this change test dbus_p2p_discovery starts failing if we set
support_p2p_device in vm-run.sh.

Signed-off-by: Vasyl Vavrychuk <vvavrychuk@gmail.com>
2018-04-02 12:02:13 +03:00
Masashi Honma
e480212765 dbus: Add FILS to global capabilities
If any of the interfaces supports FILS (and similarly for FILS-SK-PFS),
include the "fils" (and "fils_sk_pfs") capability in D-Bus information.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2018-04-02 11:56:06 +03:00
Saurav Babu
e360010c3a dbus: Add mesh to global capabilities
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2018-04-01 21:52:56 +03:00
Vasyl Vavrychuk
ebf4043739 D-Bus: Report error on starting P2P find
Signed-off-by: Vasyl Vavrychuk <vvavrychuk@gmail.com>
2018-02-03 12:25:32 +02:00
Masashi Honma
6240424a76 dbus: Add FILS key mgmt values into BSS security properties
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-12-16 13:14:37 +02:00
Saurav Babu
cdf2501494 dbus: Add new interface property to get mesh group
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-09-10 01:39:37 +03:00
Saurav Babu
190f6f1176 dbus: Add new interface property to get connected mesh peers
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-09-10 01:39:37 +03:00
Saurav Babu
a9de99b1c5 dbus: Add MeshPeerDisconnected signal
This is similar to the control interface event MESH-PEER-DISCONNECTED.

Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-09-10 01:39:37 +03:00
Saurav Babu
9b0701fbf5 dbus: Add MeshPeerConnected signal
This is similar to the control interface event MESH-PEER-CONNECTED.

Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-09-10 01:39:35 +03:00
Saurav Babu
a39b040b4c dbus: Add MeshGroupRemoved signal
This is similar to the control interface event MESH-GROUP-REMOVED.

Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-09-09 14:12:33 +03:00
Saurav Babu
89e9cd25d2 dbus: Add MeshGroupStarted signal
This introduces a new interface for mesh and adds a signal that
is similar to the control interface event MESH-GROUP-STARTED.

Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-09-09 14:01:14 +03:00
Nishant Chaprana
9f49474669 dbus: Add method to disable channel switching with a TDLS peer
This patch adds "TDLSCancelChannelSwitch" dbus method on
"fi.w1.wpa_supplicant1.Interface" interface to disable channel switching
with a TDLS peer.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2017-05-07 22:08:43 +03:00
Nishant Chaprana
2a57b4b821 dbus: Add method to enable channel switching with a TDLS peer
This patch adds "TDLSChannelSwitch" dbus method on
"fi.w1.wpa_supplicant1.Interface" interface to enable channel switching
with a TDLS peer.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2017-05-07 22:08:43 +03:00
Saurav Babu
1939505419 dbus: Add AbortScan method to abort ongoing scan
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-05-07 22:08:43 +03:00
Johannes Berg
a1f11e34c4 Use os_memdup()
This leads to cleaner code overall, and also reduces the size
of the hostapd and wpa_supplicant binaries (in hwsim test build
on x86_64) by about 2.5 and 3.5KiB respectively.

The mechanical conversions all over the code were done with
the following spatch:

    @@
    expression SIZE, SRC;
    expression a;
    @@
    -a = os_malloc(SIZE);
    +a = os_memdup(SRC, SIZE);
    <...
    if (!a) {...}
    ...>
    -os_memcpy(a, SRC, SIZE);

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-07 13:19:10 +02:00
Saurav Babu
d02989f2e4 D-Bus: Notify mesh capability if driver supports it
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-02-26 12:05:40 +02:00
Saurav Babu
213eb18851 dbus: Set mode to mesh in bss properties when mesh is supported
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-02-20 22:14:19 +02:00
Jouni Malinen
117875db33 D-Bus: Add GroupMgmt entry into the interface Capabilities dict
This can be used to determine whether the driver supports PMF and if so,
with which group management cipher suites. In addition, add the missing
pairwise and group cipher suite values to the documentation while adding
this new entry there as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-14 17:41:20 +02:00
Stijn Tintel
3cdb4ac074 D-Bus: Add pmf to global capabilities
This indicates that the wpa_supplicant binary has been compiled with PMF
support.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-14 17:29:22 +02:00
Stijn Tintel
adf8f45f8a D-Bus: Implement Pmf property
The Pmf property is documented in doc/dbus.doxygen, but does not exist,
so implement it.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-14 17:28:00 +02:00
Jouni Malinen
29065686ac D-Bus: Fix BSS Mode getter for invalid DMG BSS
Previous version could have used uninitialized char* when a DMG with
invalid capabilities were added to BSS table from scan results.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-08 18:39:24 +02:00
Jouni Malinen
77fcbf7ff1 D-Bus: Use a helper function to get possibly NULL strings
This type of check is used in quite a few getter functions, so add a
helper function to take care of it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-23 21:28:43 +02:00
Avichal Agarwal
dbf524946b D-Bus: Add DeviceType in WPS property
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
2016-12-23 21:28:43 +02:00
Avichal Agarwal
266097fdad D-Bus: Add device serial number in WPS property
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2016-12-23 11:02:43 +02:00
Avichal Agarwal
3ee6a3ab35 D-Bus: Add model number in WPS property
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2016-12-23 10:59:53 +02:00
Avichal Agarwal
ae66822cd8 D-Bus: Add WPS model name as property
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Signed-off-by: Kyeong-Chae Lim <kcya.lim@samsung.com>
2016-12-23 10:59:53 +02:00
Avichal Agarwal
318d4b5beb D-Bus: Add WPS manufacturer as property
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Signed-off-by: Kyeong-Chae Lim <kcya.lim@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2016-12-23 10:59:50 +02:00
Avichal Agarwal
b20f031c68 D-Bus: Add WPS device name as property
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Signed-off-by: Kyeong-Chae Lim <kcya.lim@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2016-12-23 10:51:09 +02:00
Amit Purwar
4e118c847b D-Bus: Add 'freq' option to P2P Find method to specify starting channel
This allows user to start P2P Find/Scan on a particular frequency and
then move to scanning social channels. This support is already present
on control socket.

Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
2016-12-19 13:09:31 +02:00
Nishant Chaprana
18f1611797 D-Bus: Send P2P IP address assignment info with GroupStarted event
This commit adds IP address information into GroupStarted event on the
P2P client side like it is sent over the control interface.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2016-11-21 14:45:13 +02:00
Nishant Chaprana
046fa6fd11 D-Bus: Add getter and setter for P2P IP address config parameters
This patch adds setter and getter for P2P IP address config parameters:
1. ip_addr_go
2. ip_addr_mask
3. ip_addr_start
4. ip_addr_end

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2016-11-20 12:41:39 +02:00
Nishant Chaprana
746e5c2565 Fix spelling mistakes in number of comments
Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2016-09-30 22:45:03 +03:00
Jose Blanquicet
b44d9c760f D-Bus: Add ConfigFile parameter into the interface properties
This patch aims to expose the configuration file path as an interface
property, like is done with the driver and the bridge name. Doing so,
higher layer programs become responsible to recreate interfaces with the
correct configuration file path when programs need to remove them.

Signed-off-by: Jose Blanquicet <blanquicet@gmail.com>
2016-08-29 11:43:53 +03:00
Roshan Pius
d015bb05df Move network add/remove operations to a common function
All the 3 control interfaces: socket based, dbus & binder needs to
perform the same sequence of steps for network add/remove. So, move
these to a common utility method in |wpa_supplicant.c| instead of
duplicating the code everywhere.

Signed-off-by: Roshan Pius <rpius@google.com>
2016-08-18 20:46:18 +03:00
Roshan Pius
5f040be4ff Move disconnect command handling to a common place
Move out the disconnect command handling from |ctrl_iface.c| to
|wpa_supplicant.c| so that it can be reused across the different
control interfaces (socket, dbus & binder).

Signed-off-by: Roshan Pius <rpius@google.com>
2016-08-13 21:11:04 +03:00
Jouni Malinen
fc1e2c0d91 D-Bus: Make the CurrentAuthMode property getter more robust
Now that mesh sets wpa_s->wpa_state = WPA_COMPLETED, it looks like this
getter can get called with wpa_s->current_ssid = NULL. That could result
in NULL pointer dereference, so need to protect that specific case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-24 23:49:08 +03:00
Nishant Chaprana
82b9ec3125 D-Bus: Add DeviceFoundProperties signal for discovered peers
This signal sends the peer properties to applications for discovered
peers. The signature of this event is "oa{sv}". This event is needed
because the current DeviceFound signal provides only the peer object
path. If there are many peers in range there will be many DeviceFound
signals and for each DeviceFound signal, applications would need to use
GetAll to fetch peer properties. Doing this many times would create
extra load over application as well as over wpa_supplicant, so it is
better to send peer properties in the event so that applications can
extract found peer information without extra steps.

The existing DeviceFound signal is left as-is to avoid changing its
signature.

The issue is not applicable to the control interface because the
P2P-DEVICE-FOUND event includes peer info in it, but over D-Bus
interface DeviceFound provides only the peer object.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2016-06-24 19:02:58 +03:00
Jouni Malinen
f4b4ddfdd9 D-Bus: Remove unused wpas_dbus_signal_p2p_group_started() parameter
The ssid pointer was not used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-30 17:56:41 +03:00
Nishant Chaprana
4fe50bbc8e D-Bus: Indicate whether created group is persistent or not
This adds an extra parameter in GroupStarted signal to indicate whether
the created group is Persistent or not. It is similar to the
[PERSISTENT] tag which comes in P2P-GROUP-STARTED over the control
interface.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2016-05-30 17:56:16 +03:00
Saurav Babu
e8a1b6b8e9 D-Bus: Check driver capability for IBSS in Modes property of Capabilities
Instead of hardcoding "ad-hoc" in the array of supported capabilities,
add this only if the driver indicates support for IBSS.

Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2016-05-13 18:53:04 +03:00
Naveen Singh
c7fb678f31 D-Bus: Add association response status code property for failure cases
(Re)Association Response frame with status code other than 0 is now
notified over DBUS as a part of PropertiesChanged signal. This can be
used by application in case AP is denying association with status code
17 (band steering) so that it does not interfere in the BSSID selection
logic of wpa_supplicant.

Signed-off-by: Naveen Singh <nasingh@google.com>
2016-03-06 20:44:51 +02:00
Lior David
ba307f8528 P2P: Add a separate pointer to the P2P Device instance
In many places in the code there was a reference to wpa_s->parent to get
from group interface to p2p_dev interface. These places can break if
P2P_DEVICE interface would need to be used with the primary interface as
the group interface, since the parent of the primary interface points to
itself and not the p2p_dev interface.

Fix this by adding a separate "p2pdev" pointer to wpa_supplicant,
it will be the same as parent pointer in most cases but whenever
the primary interface is used as a group interface, change it to
point to the correct p2p_dev interface.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
2016-02-27 19:37:19 +02:00
Lubomir Rintel
df9e2c2a55 D-Bus: Don't do <deny send_interface="..." /> in dbus service file
It does more than intended; apart from denying messages to that
particular interface it also denies all messages non-qualified with an
interface globally. This blocks messages completely unrelated to
wpa_supplicant, such as NetworkManager communication with the VPN
plugins.

From the dbus-daemon manual:

  Be careful with send_interface/receive_interface, because the
  interface field in messages is optional. In particular, do NOT
  specify <deny send_interface="org.foo.Bar"/>! This will cause
  no-interface messages to be blocked for all services, which is almost
  certainly not what you intended. Always use rules of the form: <deny
  send_interface="org.foo.Bar" send_destination="org.foo.Service"/>

We can just safely remove those rules, since we're sufficiently
protected by the send_destination matches and method calls are
disallowed by default anyway.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2016-02-07 11:55:09 +02:00
John Ernberg
f91e11f465 D-Bus: Fix p2p interface capability message
If the config file for the interface says "p2p_disabled=1", don't report
p2p capabilities on this interface. This helps programs like Connman to
not enable p2p when it's been disabled in wpa_supplicant.

Signed-off-by: John Ernberg <john.ernberg@actia.se>
2016-02-05 18:09:38 +02:00
Purushottam Kushwaha
bcce934755 dbus: Restrict DeviceName size to 32 characters in setter
The maximum WPS Device Name length is 32 characters and that limit was
already enforced for the control interface and configuration files.

Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
2016-01-15 20:16:13 +02:00
Jouni Malinen
70e0cb33f2 P2P: Provide group SSID, if specified, to P2P Client join step
At least one of the wpas_p2p_connect() callers (NFC join case) already
had access to the Group SSID. Pass that information through
wpas_p2p_connect() to wpas_p2p_join() so that the join operation can
filter out incorrect groups more easily.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-30 19:08:51 +02:00
Avichal Agarwal
af041f997d dbus: Add support for vendor specific elements
The new methods are
1. VendorElemAdd "i" "ay" i=integer ay=array of bytes
2. VendorElemGet "i" i=integer (output array of bytes)
3. VendorElemRem "i" "ay" i=integer ay=array of bytes

These provide functionality similar to the control interface commands
VENDOR_ELEM_ADD, VENDOR_ELEM_GET, and VENDOR_ELEM_REMOVE.

Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
Signed-off-by: Kyeong-Chae Lim <kcya.lim@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
Signed-off-by: Dilshad Ahmad <dilshad.a@samsung.com>
[VendorElemGet to return array of bytes instead of string; cleanup]
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 12:50:13 +02:00
Ahmad Kholaif
c27f4c9006 P2P: Add support for VHT 80+80 MHz and 160 MHz
The new max_oper_chwidth and freq2 arguments to P2P_CONNECT, P2P_INVITE,
and P2P_GROUP_ADD control interface commands can be used to request
larger VHT operating channel bandwidth to be used than the previously
used maximum 80 MHz.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-25 19:01:20 +02:00
MAYANK HAARIT
442cc8cc41 dbus: Fix memory leak in sending InvitationReceived signal
Free the message after message send in
wpas_dbus_signal_p2p_invitation_received() to avoid leaking memory.

Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
2015-11-17 17:20:03 +02:00
Samuel Tan
07e3653922 dbus: Do not use pointer arithmetic with a void pointer
This failed to compile on x86 gcc due to pointer arithmetic on a void
pointer.

Signed-off-by: Samuel Tan <samueltan@google.com>
2015-11-15 19:34:51 +02:00
Purushottam Kushwaha
2d0fe6bc4e dbus: Add SaveConfig to update configuration file
This is similar to SAVE_CONFIG on control interface, which allow users
to update the configuration file.

Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2015-11-15 19:04:15 +02:00
Purushottam Kushwaha
fb7e7daeff dbus: Fix a copy-paste error in debug print
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2015-11-15 18:53:51 +02:00
Jouni Malinen
a34eace204 dbus: Remove unused dict helper functions
There are no callers for these helper functions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 00:16:57 +02:00
Dan Williams
e50c50d5a0 dbus: Expose interface globals via D-Bus properties
All interface globals are now exposed as D-Bus properties of type
string, and parsed via the normal interface global parsing functions.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-28 23:41:32 +02:00
Dan Williams
1aa0fb77ea dbus: Pass property description to getters/setters
We'll use it later for global interface properties.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-28 23:40:49 +02:00
Ningyuan Wang
c143c3b72a D-Bus: Add a dbus handler for expected disconnection
Add a global D-Bus handler ExpectDisconnect for setting
wpa_s->own_disconnect_req flag. This flag will prevent wpa_supplicant
from adding blacklists and requesting incomplete scan upon the incoming
disconnection. This is mainly meant for a case where suspend/resume is
used and some external component knows about that and can provide the
information to wpa_supplicant before the disconnection happens.

Signed-off-by: Ningyuan Wang <nywang@google.com>
2015-10-12 18:03:11 +03:00
Maneesh Jain
be5ab8d4ab D-Bus: Add InvitationReceived Signal
This is equivalent to the P2P_EVENT_INVITATION_RECEIVED signal on the
control interface. It can be used to sent the Invitation Received signal
to applications written using D-Bus.

Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
2015-09-27 15:55:11 +03:00
Saurav Babu
893e2cf961 D-Bus: Add signal to notify WPS timeout event
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2015-09-27 12:47:47 +03:00
Nishant Chaprana
fd7d3c495e D-BUS: dev_passwd_id should be "q" because it uses DBUS_TYPE_UINT16
This corrects the type of dev_passwd_id in GONegotiationRequest event.
This field is packed as DBUS_TYPE_UINT16 but in
wpas_dbus_interface_signals it was "i" which is DBUS_TYPE_INT32.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2015-09-25 20:54:11 +03:00
Nishant Chaprana
2a95fac944 P2P: Add D-Bus signal GroupFormationFailure
This is similar to the control interface event
P2P-GROUP-FORMATION-FAILURE.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2015-09-05 23:01:20 +03:00
MAYANK HAARIT
80bb38742c dbus: Fix a typo in function comment
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
Signed-off-by: Dilshad Ahmad <dilshad.a@samsung.com>
2015-08-28 00:23:23 +03:00
Jiří Klimeš
98da137545 dbus: Do not quote scan_freq and freq_list in dbus_old_handlers.c
scan_freq and freq_list are not parsed correctly by
wpa_config_parse_int_array() if quoted.

Patch for dbus_old_handlers.c, the same change as done by Robert Shade
<robert.shade@gmail.com> for dbus_new_handlers.c in commit
99276998fa ('dbus: Do not quote scan_freq
and freq_list').

Signed-off-by: Jiří Klimeš <jklimes@redhat.com>
2015-08-28 00:13:26 +03:00
Jouni Malinen
dfaf11d648 P2P: Require fresh scan results for persistent group re-invocation
The P2P group is not yet operating when going through invitation
exchange for re-invocation. Previously, an old cached scan result could
be used to skip the scan immediately after the invitation exchange.
While this may result in the fastest possible connection, it does have
some issues with cases where the GO takes some time to start up. It
would also be at least theoretically possible for some of the BSS
parameters to be different, so having a fresh scan result from the new
GO instance may be desired in any case.

Add a mechanism to skip scan results that have been last updated before
a specific point in time and as the first user for this mechanism,
require chan results to be more recent than the invitation message
exchange for the P2P Client role in persistent group re-invocation case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-22 00:22:12 +03:00
Jouni Malinen
1fbff0b5c4 D-Bus: Set last_scan_req to MANUAL_SCAN_REQ on Scan() trigger paths
The D-Bus Scan() handler was setting wpa_s->scan_req = MANUAL_SCAN_REQ
on the code path that used wpa_supplicant_req_scan(). However, it did
not do anything similar for the cases where
wpa_supplicant_trigger_scan() is called directly. This could result in
unexpected wpa_s->last_scan_req value and incorrect behavior especially
when using ap_scan=2 and running a scan while operating in AP mode. Fix
this by explicitly setting wpa_s->last_scan_req = MANUAL_SCAN_REQ when
using wpa_supplicant_trigger_scan() from the Scan() handler.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-11 21:44:31 +03:00
Jouni Malinen
96e8c13da7 D-Bus: Fix dont_quote const declaration
Commit 38279bdb35 ('D-Bus: Coding style
cleanup') handled the dbus_new_handlers.c change properly, but misplaced
the second 'const' in dbus_old_handlers.c in a way that resulted in
duplicated const rather than marking the actual value const.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 16:25:06 +03:00
Purushottam Kushwaha
123df27eae D-Bus: Fix typos in debug print
Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
2015-06-26 23:01:37 +03:00
Maneesh Jain
2ba4de37cb D-Bus: Add documentation for wpas_dbus_signal_peer_groups_changed()
This is needed to add this function into Doxygen documentation.

Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
2015-06-26 22:44:41 +03:00
Maneesh Jain
e48b5e24a7 D-Bus: Fix typo in dbus signal function documentation
Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
2015-06-26 22:44:41 +03:00
Maneesh Jain
09d5048b76 D-Bus: Add function documentation for wpas_dbus_unregister_interface()
This is needed to add this function into Doxygen documentation.

Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
2015-06-26 22:44:41 +03:00
Maneesh Jain
adfbbd2b48 D-Bus: Add function documentation for wpas_dbus_register_interface()
This is needed to add this function into Doxygen documentation.

Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
2015-06-26 22:44:41 +03:00
Maneesh Jain
c5967f027a D-Bus: Fix wpas_dbus_signal_p2p_invitation_result() documentation
Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
2015-06-26 22:44:41 +03:00
Jouni Malinen
8e2a3a4c21 dbus: Do not initialize variable twice
There is no point in initializing 'success' to FALSE when the actual
value is set just below this.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 21:16:35 +03:00
Jouni Malinen
c1a14ef42f Do not check unsigned size is less than zero
The variables here are unsigned and as such, cannot have a negative
value. Use == 0 instead of <= 0 to make this cleaner.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 21:16:15 +03:00
Purushottam Kushwaha
4e7175827e dbus: Add RemoveClient method to remove a client from local GO
This is equivalent to the P2P_REMOVE_CLIENT command on control
interface. This can be used to remove the specified client [as object
path or string format interface address] from all groups (operating and
persistent) from the local GO.

Argument(s): peer[object path] OR iface[string format MAC address]

Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
Signed-off-by: Jijo Jacob <jijo.jacob@samsung.com>
2015-06-19 12:55:54 +03:00
Maneesh Jain
f0a79c9403 D-Bus: Fix wpas_dbus_register_peer() documentation
Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
2015-06-19 12:40:29 +03:00
Maneesh Jain
95d62a6c20 D-Bus: Add missing params in WPS function documentation
This adds missing parameters in all WPS events related function
documentation.

Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
2015-06-19 12:38:11 +03:00
Maneesh Jain
790429b520 D-Bus: Fix function documentation for wpas_dbus_signal_p2p_go_neg_resp()
Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
2015-06-19 12:35:40 +03:00
Maneesh Jain
92fe746e19 D-Bus: Add function documentation for wpas_dbus_signal_p2p_go_neg_req()
This is needed to add this function into Doxygen documentation.

Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
2015-06-19 12:31:28 +03:00
MAYANK HAARIT
b649c0afd4 dbus: Add Reconnect command to D-Bus Interface
This has same behavior as the ctrl_iface RECONNECT command.

Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
2015-06-14 11:33:54 +03:00
Avichal Agarwal
1a2f7ca1b8 D-Bus: Add WPS pbc-overlap Event
This sends an Event D-Bus signal with name "pbc-overlap" for
WPS-EVENT-OVERLAP.

Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
2015-06-10 20:51:30 +03:00
Amit Khatri
4f369652da P2P: Add ModelNumber and SerialNumber info into D-Bus peer interface
Signed-off-by: Amit Khatri <amit.khatri@samsung.com>
Signed-off-by: Rahul Jain <rahul.jain@samsung.com>
2015-06-10 19:11:12 +03:00
Amit Khatri
2899cba622 P2P: Add ModelName info into D-Bus peer interface
Signed-off-by: Amit Khatri <amit.khatri@samsung.com>
Signed-off-by: Rahul Jain <rahul.jain@samsung.com>
2015-06-10 19:06:54 +03:00
MAYANK HAARIT
aa2b12562b P2P: Add GO Intent of connecting device in GO Negotiation Request event
Add GO Intent information of connecting device in GO Negotiation Request
event which will help applications to decide its own GO intent value in
advance and can avoid failure cases when both devices use GO Intent 15
depending on application requirement.

Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2015-06-06 18:16:39 +03:00
Amit Khatri
dc1a341dec P2P: Add manufacturer info into D-Bus peer interface
Allow the Manufacturer information for a found P2P peer device to be
fetched through the D-Bus interface similarly to p2p_peer <mac address>
on ctrl interface.

Signed-off-by: Amit Khatri <amit.khatri@samsung.com>
Signed-off-by: Rahul Jain <rahul.jain@samsung.com>
Signed-off-by: Ashutosh Kaushik <k.ashutosh@samsung.com>
2015-05-29 21:28:26 +03:00
Nishant Chaprana
333039596e P2P: Add P2P Cancel method over D-Bus interface
This patch adds P2P Cancel method over
fi.w1.wpa_supplicant1.Interface.P2PDevice dbus interface.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2015-05-29 21:05:17 +03:00
Nishant Chaprana
87d3c62835 WPS: Add WPS Cancel method over D-Bus interface
Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2015-05-29 20:55:08 +03:00
Ilan Peer
b4342ca4d8 P2P: Use p2p_init_wpa_s for P2P command redirection over D-Bus
D-Bus used the p2p_dev member in struct wpa_supplicant to track the
interface used for P2P Device operations. However, this is not needed as
the interface used for P2P Device operations is stored in struct
wpa_global->p2p_init_wpa_s.

Replace all the redirections to wpa_s->p2p_dev with redirections to
wpa_s->global->p2p_init_wpa_s and removed this member as it is no
longer needed.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-05-25 18:31:09 +03:00
Jouni Malinen
96512a00d0 P2P: Fix D-Bus PresenceRequest to use group interface
This command is for a specific P2P group, not for the P2P Device
instance and as such, wpa_s pointer must not be replaced with the
interface that is used for P2P Device management.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-25 18:31:09 +03:00
Nishant Chaprana
7b642dc80b P2P: Add D-Bus FindStopped to notify P2P-FIND-STOPPED event
Add D-Bus notification mechanism of P2P-FIND-STOPPED event on
fi.w1.wpa_supplicant1.Interface.P2PDevice interface.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2015-05-25 18:31:09 +03:00
Avraham Stern
a5da657445 dbus: Stop ongoing scheduled scan when scan is requested
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-05-03 17:34:54 +03:00
Jouni Malinen
e8181e26ef dbus: Add a debug print on fill_dict_with_properties() getter failures
This makes it easier to debug issues with D-Bus property getter
operations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-29 20:43:23 +03:00
Jouni Malinen
8a78e227df D-Bus: Fix operations when P2P management interface is used
Commit 21efc940f6 ('wpa_supplicant: Do not
register a P2P management interface on DBus') hides the special P2P
management interface from D-Bus. However, it did not take into account
the possibility of wpa_s->dbus_path and wpa_s->dbus_new_path being NULL
in such cases on number of code paths within the D-Bus handlers. This
could result in invalid arguments (NULL path) being provided to D-Bus
functions (mainly, dbus_message_iter_append_basic) and NULL pointer
dereference when iterating over all interfaces. Either of these could
make wpa_supplicant process terminate.

Fix this by explicitly checking that the interface-specific D-Bus path
has been registered before using it anywhere with D-Bus handlers. In
addition, find the correct wpa_s instance to fix P2P operations through
D-Bus when the P2P Device interface is used.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-29 20:42:25 +03:00
Jouni Malinen
eaa8eefed1 Replace MAX_SSID_LEN with SSID_MAX_LEN
This makes source code more consistent. The use within Android driver
interface is left as-is to avoid changes in the old PNO interface
definition.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:44:18 +03:00
Floris Bos
8e2c5f1a20 dbus: Fix WPS property of fi.w1.wpa_supplicant1.BSS interface
The dbus interface documentation says the following about the
WPS property of the fi.w1.wpa_supplicant1.BSS interface:

==
WPS information of the BSS. Empty dictionary indicates no WPS support.
Dictionary entries are:

Type	s	"pbc", "pin", ""
==

However the implementation returns "type" => "" for BSSes
that do not support WPS.

Fix the implementation to match the documentation.
Return empty dictionary if there is no WPS support.
And "type" => "" if WPS is supported, but is not in progress
right now.

Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
2015-04-13 15:08:46 +03:00
Jouni Malinen
1772d348ea P2P: Fix interface deinit for failed group interface initialization
wpa_supplicant_deinit_iface() ends up removing all P2P groups if the
removed interface is the parent interface. This is correct behavior in
general, but this resulted in issues in the new group interface
initialization error path since wpa_s->parent was not assigned before
hitting this check. Fix this by assigning wpa_s->parent as part of
wpa_supplicant_add_iface().

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 22:36:53 +02:00
Daisuke Niwa
fa9f381f20 P2P: Allow a specific channel to be specified in P2P_FIND
The optional freq=<MHz> can now be used with the P2P_FIND command to
specify a single channel to scan during the first round of P2P search.
For example, this can be used to replace the full initial scan with a
single channel scan of a known operation channel.

Signed-off-by: Daichi Ueura <daichi.ueura@sonymobile.com>
2015-02-28 21:52:56 +02:00
Krishna Vamsi
6d9085145c P2PS: Process P2PS provisioning commands
This extends wpas_p2p_prov_disc() implementation to accept P2PS
parameters. None of the callers are yet using this functionality; the
following commit introduces a user.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:07 +02:00