Commit graph

5527 commits

Author SHA1 Message Date
Swaroop Golti
63ce59dea8 P2P: Increase Invitation Request timeouts
In noisy environment peer may take more time to send Invitation
Response so increase Invitation Response timeout to 500 ms in success
case and also increase Invitation Request action wait time to 500 ms.
This makes the Invitation Request case use the same timeout with GO
Negotiation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-05 18:14:33 -07:00
Deepthi Gowri
acdd0fc84f P2P: Clear p2p_group_formation and p2p_in_provisioning on group removal
Commit 41f853235f extends group formation
timeout for the first data connection to complete and resets
p2p_go_group_formation_completed flag due to which p2p_in_provisioning
and p2p_group_formation flags are not cleared when
wpas_group_formation_completed() is called. This can result in both
station scan and p2p_find failures in the case where separate P2P group
interface is not used and the client does not complete 4-way handshake.
Fix this by clearing p2p_group_formation and p2p_in_provisioning when
such a P2P group is deleted.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-05 17:54:52 -07:00
Arif Hussain
8b3b803ab9 Include Extended Capabilities element based on scan results
Add Extended Capabilities element to association request only if the AP
included this element in Beacon/Probe Response frames. This is a
workaround to address interoperability issues with some older APs that
do not seem to be able to handle Extended Capabilities element in
(Re)Association Request frames.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-02 08:09:05 -07:00
Deepthi Gowri
6903ee6f62 P2P Extend postponing of concurrent scans for persistent GO
Update the p2p_go_wait_client timestamp in p2p_go_configured() to
address the case where the group is set up without the provisioning
step.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-02 07:32:17 -07:00
Sunil Dutt
5bfd7e9168 TDLS: Do not start concurrent TDLS setup
A new TDLS request shall transmit TPK M1 frame with a unique INonce.
Thus a new explicit request would fail an ongoing TDLS negotiation with
the error "TDLS: FTIE SNonce in TPK M3 does not match with FTIE SNonce
used in TPK M1" if the peer happens to receive two M1 frames before an
M3 frame. Check for the ongoing negotiation with the peer and do not
start a new one if we are already in a setup negotiation with the peer.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-30 17:38:41 +03:00
Sunil Dutt
33d85b63b5 TDLS: Use wpa_tdls_disable_peer_link() in TPK M1 processing
This function is used only with external setup, so this can cleaned up
to use simpler design.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-30 17:36:26 +03:00
Sunil Dutt
1a0a2ce39c TDLS: Use wpa_tdls_disable_peer_link() to avoid peer search
There is no need to go through the peer list when we already have a
pointer to the specific peer entry.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-30 17:34:13 +03:00
Sunil Dutt
83d3fdb7c6 TDLS: Use helper function for disable link operation
This is called from number of locations and it is more efficient to use
a new helper function instead of wpa_tdls_disable_link() that would do
peer address search from the list of peers.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-30 17:29:05 +03:00
Sunil Dutt
f130b105ec TDLS: Clean up wpa_tdls_teardown_link() uses
Making this function be used only for external setup case simplifies the
implementation and makes core wpa_supplicant calls in ctrl_iface.c and
events.c consistent.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-30 17:10:18 +03:00
Jouni Malinen
f9174c3b4e tests: Flush stdout after each status line print
This makes it more convenient to follow live test execution status.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 20:42:37 +03:00
Jouni Malinen
9626962d2f tests: Add test cases for WPA2-Enterprise
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 20:35:26 +03:00
Jouni Malinen
479cbb3892 tests: Start RADIUS authentication server
This can be used to run WPA2-Enterprise test cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 19:14:16 +03:00
Jouni Malinen
77e3094bb7 hlr_auc_gw: Fix max_chal value validation
This was supposed to be at maximum EAP_SIM_MAX_CHAL (3).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 18:47:26 +03:00
Jouni Malinen
3e6547b5e8 hlr_auc_gw: Add support for processing command line operations
This allows hlr_auc_gw to be used to run a single operation without
having to use it as a server. This can be useful, e.g., for generating
GSM authentication triplets for external programs. For example:
./hlr_auc_gw -m hlr_auc_gw.milenage_db "SIM-REQ-AUTH 232010000000000"

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 18:42:37 +03:00
Jouni Malinen
2b5b875f34 EAP-AKA server: Fix AUTS processing
Commit 8a9f58f2cc ("EAP-AKA server: Store
permanent username in session data") broke AUTS processing by skipping
new authentication triplet fetch after having reported AUTS. Fix this by
started new full authentication sequence immediately after reporting
AUTS so that the updated parameters are available for the Challenge
message.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 18:39:14 +03:00
Jouni Malinen
9a50ee6d25 hlr_auc_gw: Update file comments to mention Milenage
The notes about using only fixed GSM authentication triplets were not
really up-to-date with the implementation. Milenage and GSM-Milenage
were available for EAP-SIM, EAP-AKA, and EAP-AKA'.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 17:29:44 +03:00
Jouni Malinen
997ebcfa5c tests: Auto detect group name
Some older systems used admin group, but adm group seems to be more
common nowadays, so detect this automatically rather than assume admin
group is used.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 16:41:17 +03:00
Jouni Malinen
66767f0f4a tests: Merge start-p2p-concurrent.sh functionality into start.sh
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 16:37:25 +03:00
Jouni Malinen
0d84c400f9 tests: Add mechanism for test cases to indicate a skipped run
This can be used by test cases that depend on some external component
that may not always be available to indicate clearly that a test case
was skipped rather than passed or failed.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 16:21:42 +03:00
Jouni Malinen
9b00f24a76 tests: run-tests.py -L to print out list of test cases
This can be used to get a summary of all the available test cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 16:11:48 +03:00
Jouni Malinen
48d8a43a28 tests: Adjust debug verbosity levels to get rid of extra info
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 16:07:01 +03:00
Jouni Malinen
883ab1b9f1 tests: Document automated mac80211_hwsim test setup
This provides guidance on how to build the test setup, how to run the
tests, and how to add new test cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 15:55:43 +03:00
Jouni Malinen
5f3eddac8e tests: Add test cases for P2P service discovery
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 13:15:26 +03:00
Jouni Malinen
7ebf841fc5 tests: Test GO functionality with legacy STAs
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 12:42:05 +03:00
Jouni Malinen
5388dc97e0 Document use of Linux capabilities instead of privileged process
Linux capabilities cap_net_admin and cap_net_raw can be used to replace
need for running wpa_supplicant as a root process.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 12:04:40 +03:00
Jouni Malinen
d85bb75d47 tests: Make run-tests.py command argument parser more flexible
This allow -e, -r, and -f arguments to be given in any order.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-28 18:35:17 +03:00
Jouni Malinen
3b7475d365 tests: Write test case result summary into a file
This can be used to build statistics from test execution without having
to go through number of log files.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-28 18:31:00 +03:00
Jouni Malinen
1fc114a16a tests: Add test duration and time to PASS/FAIL reports
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-28 18:20:32 +03:00
Jouni Malinen
8d0825d655 tests: Exit early if startup fails
There is no point trying to go through the tests if hostapd and
wpa_supplicant processes cannot be started properly.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-28 18:19:38 +03:00
Jouni Malinen
6ca3a98bc2 tests: Wait for driver scan state to clear between tests
cfg80211/mac80211 seems to getting stuck with scans every now and then.
Check for this special state and delay return from reset() until the
driver has stopped the scan operation. This reduces likelihood of
failing multiple test cases in a row because of a single error.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-28 18:18:33 +03:00
Jouni Malinen
a771c07dfc Add driver status information to control interface
STATUS-DRIVER command can now be used to fetch driver interface status
information. This is mainly for exporting low-level driver interface
information for debug purposes.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-28 17:19:30 +03:00
Jouni Malinen
739faee2a9 nl80211: Add some more debug prints for mgmt frame TX
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-28 12:10:57 +03:00
Jouni Malinen
ef2bd5a344 tests: Add a test case for P2P invitation
test_p2p_go_invite verifies that GO can invite a peer in a case where
the operating channel and peer's listen channel are different.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-28 12:09:40 +03:00
Jouni Malinen
f78f278520 nl80211: Fix off-channel Action frame TX from GO with use_monitor
TX frequency gets lost when going through the monitor send MLME option
and this resulted in P2P operations like invitation from a GO failing
when the driver needs monitor socket, but would support offchannel TX.
Fix this by using frame_cmd path instead in case the monitor socket
would have been hit for action frame TX.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-28 12:08:19 +03:00
Jouni Malinen
d3b082371d tests: Speed up stop-wifi.sh
Split the long waits to iterations of shorter waits that can be stopped
based on processes having died.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-28 11:06:46 +03:00
Jouni Malinen
53b63a0a3f tests: Add support for using Linux kernel tracing functionality
run-all.sh and start.sh scripts can now take 'trace' command line
argument to request Linux tracing information from mac80211, cfg80211,
and wpa_supplicant to be recorded.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-28 11:06:46 +03:00
Jouni Malinen
298f51857d Get rid of compiler warning in no-CONFIG_CTRL_IFACE builds
no_ctrl_interface parsing was declared within ifdef CONFIG_CTRL_IFACE
block, so the parser function needs to be marked similarly.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-27 23:42:37 +03:00
Jouni Malinen
ea61aa1de1 Add no_ctrl_interface config param to clear ctrl_interface
This can be used to override previously set ctrl_interface value in a
way that clears the variable to NULL instead of empty string. The only
real use case for this is to disable per-interface ctrl_interface from
the additional control file (-I<file>) in case ctrl_interface was set in
the main configuration file. It should be noted that zero-length
ctrl_interface parameter can be used to initiate some control interface
backends, so simpler designs were not available for this.

The format of the new parameter is not exactly cleanest due to
configuration file parsing assumptions. For example:

ctrl_interface=....
no_ctrl_interface=

would end up with ctrl_interface=NULL.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-27 23:34:35 +03:00
Jouni Malinen
25b65a142d Make sure updated BSS entry does not get added twice to the list
When the BSS table is being updated based on new scan results, a BSS
entry could end up getting added into last_scan_res list multiple times
if the scan results from the driver includes duplicated values. This
should not happen with driver_nl80211.c since it filter outs duplicates,
but in theory, other driver wrappers could indicate such scan results.
Anyway, it is safer to make sure this cannot happen by explicitly
verifying the last_scan_res list before adding an updated BSS entry
there. A duplicated entry in the list could potentially result in freed
memory being used if there is large enough number of BSSes in the scan
results to cause removal of old BSS entries.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-27 16:00:50 +03:00
Jouni Malinen
a3cbf82e6d Fix possible freed-memory use in BSS table updates
If there are large number of BSSes in the scan results, BSS table update
could have added a BSS entry to the last_scan_res in a case where that
BSS entry got just deleted. This would happen only if there are more
than bss_max_count (by default 200) BSSes and if at least bss_max_count
of those BSSes are known (match a configured network). In such a case,
wpa_bss_add() could end up allocating a new BSS entry and return a
pointer to that entry even if it was the one that ended up getting freed
to keep the BSS table length within the limit. This could result in
freed memory being used and the process crashing (likely with segfault)
when trying to access information from that BSS entry.

Fix the issue by removing the oldest BSS entry before linking the new
entry to the table. This makes sure the newly added entry will never get
picked up as the one to be deleted immediately.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-27 15:56:06 +03:00
Jouni Malinen
bbc6c729a5 P2P: Use group formation timeout on persistent group GO
Previously, GO considered the group to be fully re-invoked after
starting beaconing on successful invitation exchange. This would leave
the group running until idle timeout (which may not be enabled) or
explicit removal if the client fails to connect for any reason. Since
the client is expected to connect immediately after the invitation
exchange that ends with status=0 (i.e., either client initiated the
exchange or it responded with success), extend group formation timeout
to cover that period until the first successfully completed data
connection. This allows the GO to remove the group automatically if the
client devices does not connect within
P2P_MAX_INITIAL_CONN_WAIT_GO_REINVOKE (15) seconds.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-26 21:24:09 +03:00
Jouni Malinen
41f853235f P2P: Extend group formation timeout on GO to first data connection
Previously, GO considered the group to be fully formed at the completed
of WPS provisioning step. This would leave the group running until idle
timeout (which may not be enabled) or explicit removal if the client
fails to connect for any reason. Since the client is expected to connect
immediately after the WPS provisioning step, extend group formation
timeout to cover that period until the first successfully completed data
connection. This allows the GO to remove the group automatically if the
client devices does not connect within P2P_MAX_INITIAL_CONN_WAIT_GO (10)
seconds.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-26 20:32:44 +03:00
Jouni Malinen
20625e9753 P2P: Remove P2P groups on process termination
Killing the wpa_supplicant process or using TERMINATE ctrl_iface command
resulted in the process existing without cleaning up possibly added
dynamic P2P group interfaces. Clean this up by stopping each P2P group
before stopping eloop.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-26 01:38:30 +03:00
Jouni Malinen
76fe79ef2d Register wpa_msg callback even if only global ctrl_iface is used
Previously, wpa_msg_register_cb() was called only from successful
completion of per-interface control interface initialization. This would
leave the callback unregistered in case only the global control
interface is used which would result in not delivering control interface
events on the global interface. Fix this by registering the callback
handler also from successful initialization of the global control
interface.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-26 01:31:32 +03:00
Jouni Malinen
af96448488 nl80211: Add more debug prints for send_mlme operations
This makes it easier to debug issues in incorrect channel use in
management frame transmission.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-25 23:18:33 +03:00
Jouni Malinen
5d4c78fb1f nl80211: Reset nlmode to station on leaving IBSS
Previously, IBSS mode (NL80211_IFTYPE_ADHOC) was left in drv->nlmode
when leaving IBSS. This causes issues for send_mlme() handler for P2P
Probe Response transmission in Listen state. Fix this by clearing nlmode
back to NL80211_IFTYPE_STATION on leaving IBSS so that following P2P
operations can be executed correctly. Previously, this was fixed only
when the next authentication/association attempt in station mode
occured.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-25 23:14:41 +03:00
Jouni Malinen
0249c12596 Avoid compiler warning with CONFIG_NO_STDOUT_DEBUG=y
There is no need to use the bss variable which is used only within a
wpa_printf() call that can be conditionally removed from the build.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-25 19:24:17 +03:00
Jouni Malinen
ed1bf011da Allow hostapd config file for dynamically added interface
This extends hostapd global control interface command "ADD" to use a
configuration file instead of requiring configuration to be built using
SET command.

The command format is now following:
ADD <ifname> <control path|config=<path to config>>

For example:

ADD wlan0 /var/run/hostapd
ADD wlan0 config=/tmp/hostapd.conf

When using the configuration file option, ctrl_interface parameter in
the file needs to be set to allow ENABLE command to be issued on the new
interface.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-25 19:07:29 +03:00
Jouni Malinen
97bacf7cf6 Do not clear hostapd configuration parameters on disable-iface
There was a comment about the the cleanup steps being from
hostapd_cleanup_iface(). However, the operations that cleared some
security parameters do not seem to exist elsewhere and do not make sense
here. Remove them to avoid changing configuration with DISABLE followed
by ENABLE.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-25 18:35:32 +03:00
Jouni Malinen
66f4dd1550 hostapd: Fix couple of deinit path cases to clear pointers
This fixes some issues where dynamic interface enable/disable cycles
could end up trying to free resources twice and crash the process while
doing so.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-25 18:14:13 +03:00