Commit graph

1834 commits

Author SHA1 Message Date
Jouni Malinen
4bc2ffaaf8 tests: Use logger.info() instead of print in FST test cases
It is better to get these messages into the actual debug log instead of
hoping they will be noticed from stdout.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-30 13:40:58 +02:00
Jouni Malinen
dafe0b6429 tests: Clean up at the end of connect_cmd_disconnect_event
This test case used to leave the dynamically added wlan5 interface in a
state where it was still trying to reconnect to a network. This could
result in the following test cases being unable to clear the cfg80211
scan cache. Avoid this type of issues by explicitly stopping the
connection attempt and making sure that there are no scan results in the
cache at the end of connect_cmd_disconnect_event.

The following test case sequence triggered a failure due to the
remaining BSS table entry:
connect_cmd_disconnect_event connect_cmd_wep ap_hs20_random_mac_addr

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-30 13:29:32 +02:00
Jouni Malinen
b90b3eab1f tests: Clear ignore_old_scan_res explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:48:01 +02:00
Jouni Malinen
49d51a0dcb tests: Clear p2p_pref_chan explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:43:46 +02:00
Jouni Malinen
db3070d289 tests: Clear p2p_go_intent explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:40:25 +02:00
Jouni Malinen
cf3a9d8f06 tests: Clear p2p_add_cli_chan explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:33:17 +02:00
Jouni Malinen
721ec02da5 tests: Clear p2p_no_go_freq explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:33:09 +02:00
Jouni Malinen
161c8515cc tests: Make ap_wps_probe_req_ie_oom more robust
It was possible to hit a race condition between WPS_CANCEL and
immediately following WPS_PIN command. Wait for a disconnection event to
avoid that. This was seen with the following test case sequence:
ap_wpa2_psk_supp_proto_wrong_group_key_len ap_wps_probe_req_ie_oom

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:21:08 +02:00
Jouni Malinen
33dfdcbae7 tests: wpa_supplicant AP mode with ACS
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-24 22:24:05 +02:00
Johannes Berg
be9fe3d8af tests: vm: Output everything on console
When running tests, make printk put all messages, including debug
messages, onto the serial console to go into the console file.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-24 21:27:24 +02:00
Jouni Malinen
0c8eacd1ab tests: EAP-TNC protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-24 19:16:15 +02:00
Jouni Malinen
e85bb01998 tests: Move P2P-REMOVE-AND-REFORM-GROUP cases more robust
Wait for the AP-DISABLED and AP-ENABLED group events before reading the
current group operation frequency after P2P-REMOVE-AND-REFORM-GROUP.
This reduces a possibility of a race condition making a test case fail
with the returned frequency being 0 when reading this before the
reformed group is fully up. This may help avoid false error reports for
the following test cases: p2p_go_move_reg_change p2p_go_move_scm
p2p_go_move_scm_peer_supports p2p_go_move_scm_multi.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-24 13:40:54 +02:00
Jouni Malinen
44f4394296 tests: RADIUS Accounting and non-ASCII SSID
This shows an example of Called-Station-Id in Access-Request and
Accounting-Request with non-ASCII characters.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-24 12:19:41 +02:00
Jouni Malinen
52811b8c90 tests: EAP-TLS with intermediate CAs and OCSP multi
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-24 00:54:30 +02:00
Jouni Malinen
98d125cafa tests: Minimal testing of OCSP stapling with ocsp_multi
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-23 00:32:52 +02:00
Jouni Malinen
8adce07a73 tests: Add dh_file parameter for integrated EAP server
This is needed for number of EAP test cases at least when using the
internal TLS server implementation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-22 17:51:54 +02:00
Jouni Malinen
3b6f3b37b8 tests: WPA2-Enterprise connection using EAP-EKE (many connections)
This tries to make it more likely to hit the special case of pub_len <
prime_len for additional code coverage.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-21 23:57:16 +02:00
Jouni Malinen
2fd377dea1 tests: EAP protocol tests with expanded header
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-21 23:31:15 +02:00
Jouni Malinen
47eac38a63 tests: Add AP Location Public Identifier into gas_anqp_extra_elements
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-21 11:56:56 +02:00
Jouni Malinen
f2dfb1dafa tests: GAS fragmentation and comeback delay
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 21:07:33 +02:00
Jouni Malinen
70f2a3f4ab tests: GAS fragmentation with mac80211_hwsim MCC enabled
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 21:07:33 +02:00
Jouni Malinen
35c146bc1b tests: Update gas_anqp_oom_hapd to match new implementation
Since wpa_supplicant is now retrying GAS comeback failures once, the
gas_anqp_oom_hapd test case started failing. Fix this by updating the
test case to expect success (on the retry).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 21:07:33 +02:00
Jouni Malinen
f9a9304479 tests: Modify gas_malformed_comeback_resp to allow GAS retries
This is in preparation of a wpa_supplicant change to allow GAS retries
which can result in the previous test case design showing failures due
to "unexpected" management frames (GAS Initial Request from the retry).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 21:07:33 +02:00
Jouni Malinen
d5f5d260b8 tests: EAP-PEAP phase1 TLS flags
This adds some more test coverage for phase1 parameters that had not
previously been included in any of the test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:36:51 +02:00
Jouni Malinen
5382712518 tests: EAP-TTLS with unsupported Phase 2 EAP method in configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:33:03 +02:00
Jouni Malinen
7cb27f89f2 tests: EAP-TLS and TLS Message Length in unfragmented packets
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
cef42a44e2 tests: EAP-TLS and config blob missing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
02b4fb4057 tests: Speed up TNC test cases with the use of a single channel scan
There is no need for these test cases to run a full scan.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
7789070b95 tests: TNC PEAP-SoH local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
212d6a1732 tests: TNC TTLS local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
7c7234a583 tests: Fix scan result clearing in ssid_hidden*
These test cases were supposed to clear the cfg80211 and wpa_supplicant
scan caches in the end to avoid causing issues to the following test
cases. This did not work properly after introduction of the support for
aborting a pending scan. Fix this by using the flush_scan_cache()
function and waiting within the test case until the final scan operation
completes.

This issue was triggered by ssid_hidden/ssid_hidden2 followed by
ext_password_interworking (though, not every time).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
bfdb90d40f tests: EAP-TTLS/MSCHAP with password hash
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
c44e499463 tests: EAP-TTLS local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
a551da6aae tests: EAP-PEAP local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-19 21:31:17 +02:00
Jouni Malinen
09a4404a33 tests: EAP-PEAP version forcing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-19 20:59:14 +02:00
Jouni Malinen
81e1ab85bc tests: EAP-PEAP session resumption with crypto binding
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-19 20:23:51 +02:00
Jouni Malinen
09ad98c58a tests: EAP-PEAP with peap_outer_success=0
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-19 20:05:50 +02:00
Jouni Malinen
446dd7486c tests: REQ_HS20_ICON and DEL_HS20_ICON
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-19 18:34:01 +02:00
Ilan Peer
2e99239bd9 tests: Add rfkill tests for P2P Device operations
Add a couple of tests for rfkill with P2P Device operations
(with and without P2P Device interface).

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-12-18 22:26:18 +02:00
Jouni Malinen
9f052d805d tests: Prepare ap_open_out_of_memory for modified rfkill init path
The rfkill initialization will be moved out from
wpa_driver_nl80211_drv_init() which would break one step in this OOM
test case due to the memory allocation not existing anymore. Fix this by
skipping that OOM step to avoid causing false failures with the
following commits.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-18 22:26:18 +02:00
Jouni Malinen
27f6b03115 tests: wpa_supplicant SIGNAL_MONITOR command
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-18 21:02:37 +02:00
Jouni Malinen
6e9554e307 tests: Detect invitation GO issues more quickly
This speeds up and clarifies error reporting for cases where the GO
fails to start in invitation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-18 16:14:55 +02:00
Johannes Berg
05736da8c6 tests: vm: Honor EPATH in uevent.sh
This is useful for testing CRDA since it means you can use EPATH to
redirect the test scripts to a different crda binary.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-18 00:24:51 +02:00
Jouni Malinen
c4e06b9b7b tests: EAP-TTLS with invalid phase2 parameter values
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-18 00:24:51 +02:00
Jouni Malinen
d386a9ace8 tests: TDLS with VHT 80, 80+80, and 160
This adds more coverage for TDLS testing for a case where the direct
link should use various VHT channel bandwidths.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-17 21:20:02 +02:00
Jouni Malinen
7e40a8812b tests: Verify SIGNAL_POLL values in ap_vht80
This confirms that the station recognized and negotiated 80 MHz
channel use with VHT.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-17 21:20:02 +02:00
Jouni Malinen
138903f91f tests: Run OCSP test cases with internal TLS library
There is no sufficient OCSP support to go through these test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-17 21:19:59 +02:00
Jouni Malinen
58a406202a tests: OCSP certificate signed OCSP response using key ID
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-17 00:49:26 +02:00
Jouni Malinen
8e416cecdb tests: Make key-lifetime-in-memory more robust for GTK check
The decrypted copy of a GTK from EAPOL-Key is cleared from memory only
after having sent out CTRL-EVENT-CONNECTED. As such, there was a race
condition on the test case reading the wpa_supplicant process memory
after the connection. This was unlikely to occur due to the one second
sleep, but even with that, it would be at least theorically possible to
hit this race under heavy load (e.g., when using large number of VMs to
run parallel testing). Avoid this by running a PING command to make sure
wpa_supplicant has returned to eloop before reading the process memory.
This should make it less likely to report false positives on GTK being
found in memory.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-14 17:23:47 +02:00
Jouni Malinen
f089cdf98e tests: Add more memory details on key-lifetime-in-memory
This makes it easier to see where in memory the key was found and what
there is in memory around that location.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-14 15:49:01 +02:00