Jouni Malinen
4896ddaea1
tests: Check for exceptions during TEST-START/STOP
...
It looks like the NOTE commands can time out in some cases. Avoid
stopping the test run in such a case to get more coverage if this is a
temporary issue.
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-24 19:41:08 +03:00
Jouni Malinen
76d320ef3f
tests: Update concurrent P2P setup to match start.sh changes
...
The design for launching AP mode interfaces was changed, but
start-p2p-concurrent.sh was not updated with matching changes.
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-24 19:01:32 +03:00
Jouni Malinen
9d86f37f78
tests: Validate AP connection in each TDLS step
...
Make sure the connection between each STA and the AP is in working state
between each TDLS setup/teardown operation.
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-31 13:38:34 +03:00
Jouni Malinen
ec9589fdac
tests: Pass apdev instead of bssid to TDLS functions
...
This makes it easier to add new validation steps into TDLS setup and
teardown processes.
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-31 13:27:41 +03:00
Jouni Malinen
fdae3c40f6
tests: Add a test case for IBSS RSN
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-21 16:01:54 +03:00
Jouni Malinen
0fa28afe35
tests: Use wpa_supplicant global control interface for P2P
...
This allows more consistent interface to be used regardless of which
P2P driver design is used (especially for P2P management operations
over netdev vs. dedicated P2P_DEVICE).
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-01 00:36:33 +03:00
Jouni Malinen
441d6d23b2
tests: Initialize global wpa_supplicant control interface
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-06-30 20:21:07 +03:00
Jouni Malinen
cd7f1b9a1d
tests: Add test cases for Fast BSS Transition
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-24 16:05:40 +03:00
Jouni Malinen
280cd8a9a2
tests: Allow hwsim_test and wlantest_cli to be used from PATH
...
This makes it easier to support some test environments where the
repository is shared between hosts.
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-11 11:34:49 +03:00
Jouni Malinen
8c87f65f32
tests: Use /var/run/hostapd-global to avoid socket file in work dir
...
This makes some cases more convenient with read-only file systems.
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-10 17:09:55 +03:00
Jouni Malinen
6edaee9c82
tests: Test WPS ER UPnP functionality to add Enrollees
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-28 22:00:58 +03:00
Jouni Malinen
bdb112d35f
Add bitfield routines
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-27 22:16:40 +03:00
Jouni Malinen
590160d502
tests: Add a test case for AP auto configuration on config token build
...
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-04-27 22:15:06 +03:00
Jouni Malinen
8e80dd5b0c
tests: Use ignore_old_scan_res with some more WPS tests
...
The scan results from old test cases showing different SSID on the AP
can result in false failures, so avoid those by ignoring old scan
results from cfg80211.
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-04-27 22:12:45 +03:00
Jouni Malinen
f59a10d405
tests: Generate a tarball of test results if a test fails
...
This makes it easier to collect failure data from test servers for
further analysis.
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-26 13:48:48 +03:00
Jouni Malinen
79c3cbaf12
tests: Capture hwsim0 packet dump during test run
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-26 12:36:56 +03:00
Jouni Malinen
ea295abcd5
tests: Add test cases for NFC+WPS
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-01 19:34:53 +03:00
Jouni Malinen
c7860beb52
tests: Use Wlantest class in test_autogo_tdls
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-01 10:37:44 +03:00
Jouni Malinen
93a06242ce
tests: Add a test case for Hotspot 2.0 network selection
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-01 01:01:24 +03:00
Jouni Malinen
6b67117a34
tests: Stop wpa_supplicant before hostapd
...
Stopping the AP first was not ideal for the test cases since it could
result in wpa_supplicant trying to connect back and start a scan at the
end of a test case and cause problems for the following test case that
tried to scan in the beginning while the previously started scan was
still in progress.
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-01 00:59:50 +03:00
Jouni Malinen
62d58f7ae3
tests: Use FLUSH command to clear wpa_supplicant state
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 20:32:33 +03:00
Jouni Malinen
6dacb8e98b
tests: Ignore old scan results in couple more WPS test cases
...
These have shown failures due to obsolete scan results from previous
test cases being present.
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 20:01:57 +03:00
Jouni Malinen
1a8e4761da
tests: Use a more compact summary of test results
...
Do not print the potentially long list of passed test cases. In case of
failure(s), make sure the failed test list is the last item in the
report.
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:10:17 +03:00
Jouni Malinen
803edd1c09
tests: Fix BSS table flushing and old result ignoring for WPS tests
...
The WPS tests are more prone to fail if scan results from the previous
test cases are allowed to remain in the wpa_supplicant BSS table during
the consecutive test since the test setup uses the same BSSID for the
test APs that change their configuration. Avoid these mostly bogus
issues by enforcing wpa_supplicant to drop and ignore old scan results
during the WPS test cases.
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:42 +03:00
Jouni Malinen
347c77e6cc
tests: Remove obsolete test script
...
The generic test cases and run-tests.py have removed need of this
separate test script.
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:42 +03:00
Jouni Malinen
7585f349c7
tests: Add command line argument -f for specifying a test file
...
This can be used to run all test cases from a single test file.
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:42 +03:00
Jouni Malinen
63a020ead8
tests: Use a single set of scripts for running both P2P and AP tests
...
This removes the unnecessary separation of P2P (no hostapd) and AP
tests. The same scripts can be used to prepare for these tests and to
execute the tests.
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:31 +03:00
Jouni Malinen
0b20f514de
tests: Make hostapd test setup more similar to the P2P tests
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:31 +03:00
Jouni Malinen
ae3ad3284a
tests: Pass AP devices to test cases
...
This removes hardcoded assumptions about AP interfaces from test_*.py.
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:31 +03:00
Jouni Malinen
302b7a1b09
tests: Add test cases for WPS operations
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 12:46:05 +03:00
Jouni Malinen
fde43cddb9
tests: Fix test_discovery to force full device discovery
...
P2P_PROV_DISC fails if the peer is not fully discovered and the previous
version of the test cases did not force this (i.e., it could have
started PD just based on having seen a Probe Request frame from the
peer).
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 20:31:22 +02:00
Jouni Malinen
5924d4c105
P2P: Add a test case for discovering a P2P client in a group
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 20:17:11 +02:00
Jouni Malinen
b12b7c7a1f
tests: Make test_discovery report PD failures with more detail
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 16:10:04 +02:00
Jouni Malinen
5b06bdf795
tests: Add SA Query test with PMF
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 15:31:50 +02:00
Jouni Malinen
835a546b20
tests: Add test cases for PMF
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 13:47:22 +02:00
Jouni Malinen
5126138c9e
tests: Add roaming test cases
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 11:28:39 +02:00
Jouni Malinen
fcbccf1aae
tests: Set umask to avoid unexpected issues with hostapd sockets
...
buildbot seems to be running with more limited umask by default and that
prevented the hostapd per-interface socket from being accessed.
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 11:11:55 +02:00
Jouni Malinen
8bc0799b93
tests: Use the ap_ifname variable instead of hardcoding ifname
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 10:31:18 +02:00
Jouni Malinen
894541ea9c
tests: Get rid of the unnecessary add_tests() functions
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 21:03:55 +02:00
Jouni Malinen
b61e418c35
tests: Add helper functions for connection to an AP
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 20:41:57 +02:00
Jouni Malinen
e259d186cf
tests: Add helper functions for starting hostapd AP
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 20:33:25 +02:00
Jouni Malinen
0165c4be10
tests: Add TDLS test cases for WEP and open network
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 19:15:43 +02:00
Jouni Malinen
e492837b67
tests: Add TDLS test cases with WPA-PSK and WPA+WPA2-PSK
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 18:51:48 +02:00
Jouni Malinen
b8cd4c542f
tests: Configure hostapd dynamically during the tests
...
This makes it more convenient to change hostapd parameters between the
test cases.
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 18:37:03 +02:00
Jouni Malinen
9f46d57f2b
tests: Rename AP testing scripts to be more generic
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 17:19:47 +02:00
Jouni Malinen
a9bdfd49a6
tests: Add more test cases for TDLS functionality
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-27 16:40:49 +02:00
Jouni Malinen
dc4e222cb7
tests: Use more thorough validation of TDLS frame paths
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-27 16:05:52 +02:00
Jouni Malinen
059555878e
tests: Add forgotten new files to the repository
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-27 14:40:49 +02:00
Jouni Malinen
81266da728
tests: Add initial AP tests with hostapd
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-27 14:29:01 +02:00
Jouni Malinen
d014a15046
tests: Fix TDLS counter validation
...
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-27 13:32:36 +02:00