Commit graph

12343 commits

Author SHA1 Message Date
Gaole Zhang
21ac782797 QCA nl80211 vendor attribute for specific sub-20 MHz channel width
Define a new attribute QCA_WLAN_VENDOR_ATTR_CONFIG_SUB20_CHAN_WIDTH.
This attribute can set a station device to work in 5 or 10 MHz channel
width while in disconnect state.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-01 11:55:04 +02:00
Jouni Malinen
622bc51f5a tests: WNM BSS Transition Management and scan needed (Table E-4)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-01 11:39:24 +02:00
Jouni Malinen
133a8b9d7a tests: WNM BSS TM with explicit Table E-4 indication
wnm_bss_tm_global uses an unknown country code to use Table E-4. Extend
that with otherwise identical test case wnm_bss_tm_global4, but with the
country string explicitly indicating use of Table E-4 while using a
known country code.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-01 11:27:48 +02:00
Jouni Malinen
62a766f3b1 tests: Country code string and the third octet
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-01 11:11:31 +02:00
Jouni Malinen
ff936bc753 Make the third octet of Country String configurable
The new hostapd.conf parameter country3 can now be used to configure the
third octet of the Country String that was previously hardcoded to ' '
(= 0x20).

For example:

All environments of the current frequency band and country (default)
country3=0x20

Outdoor environment only
country3=0x4f

Indoor environment only
country3=0x49

Noncountry entity (country_code=XX)
country3=0x58

IEEE 802.11 standard Annex E table indication: 0x01 .. 0x1f
Annex E, Table E-4 (Global operating classes)
country3=0x04

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-01 10:58:15 +02:00
Masashi Honma
b80130c60b tests: Add mesh path test
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-03-01 00:44:17 +02:00
Masashi Honma
d760db19b1 tests: Save the log of wmediumd
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-03-01 00:35:40 +02:00
Jouni Malinen
33a6da6908 tests: Work around pyopenssl API change
OpenSSL.SSL.Connection.state_string() was replaced with
get_state_string() in pyopenssl. Add workaround code to be able to use
either of these names.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-01 00:20:29 +02:00
Johannes Berg
5118319831 trace: Look up start to cope with ASLR
When ASLR is enabled, like it is by default on many distros now,
the trace code doesn't work right.

Fix this by looking up the start of the executable mapping and
subtracing it from all the lookups.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2017-02-28 11:37:19 +02:00
Jouni Malinen
069daec4ee tests: Fix EAPOL frame source address in protocol tests
The send_eapol() calls for delivering frames to wpa_supplicant had a
copy-paste bug from the earlier hostapd cases. These were supposed to
use the BSSID, not the address of the station, as the source address.
The local address worked for most cases since it was practically
ignored, but this could prevent the race condition workaround for
association event from working. Fix this by using the correct source
address (BSSID).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-28 11:24:15 +02:00
Jouni Malinen
206516e8c2 af_alg: Crypto wrappers for Linux kernel crypto (AF_ALG)
CONFIG_TLS=linux can now be used to select the crypto implementation
that uses the user space socket interface (AF_ALG) for the Linux kernel
crypto implementation. This commit includes some of the cipher, hash,
and HMAC functions. The functions that are not available through AF_ALG
(e.g., the actual TLS implementation) use the internal implementation
(CONFIG_TLS=internal).

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-28 11:24:15 +02:00
Jouni Malinen
b41d3e0a75 crypto: Process des_encrypt() error returns in callers
This updates all the des_encrypt() callers to handle error cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-28 11:24:05 +02:00
Jouni Malinen
5f0e165e80 crypto: Add return value to DES and AES encrypt/decrypt
These operations may fail with some crypto wrappers, so allow the
functions to report their results to the caller.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-28 11:23:54 +02:00
Ashwini Patil
dca4b503f1 MBO: Fix minimum length check on non_pref_chan configuration
The reason detail field in non_pref_chan attribute was removed
from MBO draft v0.0_r25. Also oper_class can be 1 character for
few country codes (e.g., country code-UK, channel number-1). So the
shortest channel configuration is 7 characters.

This was missed in the earlier commit
4a83d4b686 ('MBO: Do not add reason_detail
in non_pref_chan attr (STA)') that took care of other changes related to
removal of the reason detail.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-26 12:26:22 +02:00
Peng Xu
5b9f46df0e hostapd: Get channel number from frequency based on other modes as well
When getting the channel number from a frequency, all supported modes
should be checked rather than just the current mode. This is needed when
hostapd switches to a channel in different band.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-26 12:24:03 +02:00
Jouni Malinen
4c8836f139 FILS: Fix fils_hlp.c build with older netinet/udp.h definitions
The __FAVOR_BSD macro was previously used in netinet/udp.h to select
between two different names of the variables in struct udphdr. Define
that to force the versions with the uh_ prefix. In addition, use the
same style consistently within fils_hlp.c.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-26 12:18:29 +02:00
Jouni Malinen
c4bb39707f Fix AES-SIV build dependencies
aes-siv.c needs functions from aes-ctr.c and aes-omac1.c, so set
NEED_AES_CTR=y and NEED_AES_OMAC1=y if NEED_AES_SIV is defined. This
fixes some build configuration combinations where either of those
dependencies were not pulled in through other parameters. For example,
some CONFIG_FILS=y cases were impacted.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-26 12:05:40 +02:00
Jouni Malinen
694a3a0d64 mesh: Fix CONFIG_MESH=y build without CONFIG_IEEE80211W=y
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-26 12:05:40 +02:00
Jouni Malinen
47e148592d tests: AP with open mode and use for SELECT_NETWORK freq parameter
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-26 12:05:40 +02:00
Jouni Malinen
88a447556e Fix SELECT_NETWORK freq parameter
This functionality was originally added in commit
204c9ac4ee ('Extend select_network command
with freq= to reduce scan time') re-using wpa_s->manual_scan_freqs and
MANUAL_SCAN_REQ. That got broken when commit
35d403096e ('Set NORMAL_SCAN_REQ on
SELECT_NETWORK/ENABLE_NETWORK') started overriding wpa_s->scan_req for
SELECT_NETWORK.

Fix this by adding a new scan frequency list specifically for
SELECT_NETWORK so that this does not need to depend on any specific
wpa_s->scan_req value.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-26 12:05:40 +02:00
Saurav Babu
d02989f2e4 D-Bus: Notify mesh capability if driver supports it
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-02-26 12:05:40 +02:00
Jouni Malinen
361afb4f0f tests: FILS SK using ERP with SIM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-26 12:05:40 +02:00
Jouni Malinen
360f8ad4ef tests: FILS SK using ERP and AP going away
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-26 12:05:40 +02:00
Jouni Malinen
57a2aacabf Add option to disable broadcast deauth in hostapd on AP start/stop
The new broadcast_deauth parameter can be used to disable sending of the
Deauthentication frame whenever AP is started or stopped. The default
behavior remains identical to the past behavior (broadcast_deauth=1).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-26 12:05:40 +02:00
Jouni Malinen
21ed24f5ad hostapd: Fix potential mesh-related change from impacting non-mesh cases
Commit 01e2231fdc ('hostapd: Skip some
configuration steps for mesh cases') removed some operations based on
hapd->iface->mconf being NULL. This was within #ifdef CONFIG_MESH, so it
should not impact hostapd, but it can impact AP mode with
wpa_supplicant. That does not sound intentional, so make these
conditional on hapd->conf->mesh being enabled.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-26 12:05:40 +02:00
Jouni Malinen
659ff34023 tests: FILS PMKSA caching with Cache Identifier and external management
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-26 12:05:40 +02:00
Jouni Malinen
b7286c1b5d FILS: External management of PMKSA cache entry with Cache Identifier
The PMKSA_GET and PMKSA_ADD commands can now use an optional extra
parameter to fetch and add PMKSA cache entries with the FILS Cache
Identifier.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-26 12:05:40 +02:00
Jouni Malinen
22c54cd738 tests: FILS Cache Identifier for PMKSA caching
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-26 12:05:40 +02:00
Jouni Malinen
869af30728 FILS: Use FILS Cache Identifier to extend PMKSA applicability
This allows PMKSA cache entries for FILS-enabled BSSs to be shared
within an ESS when the BSSs advertise the same FILS Cache Identifier
value.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-26 12:05:40 +02:00
Jouni Malinen
6bb32582df tests: Extend PMKSA output parser to handle FILS Cache Identifier
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-21 12:51:48 +02:00
Jouni Malinen
6aea02e579 SME: Clear portValid on starting authentication to fix FILS
The ft_completed for FILS authentication case in
wpa_supplicant_event_assoc() depends on something having cleared
portValid so that setting it TRUE ends up authorizing the port. This
clearing part did not happen when using FILS authentication during a
reassociation within an ESS. Fix this by clearing portValid in
sme_send_authentication() just before the keys are cleared (i.e., the
old connection would not be usable anyway).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-21 12:51:48 +02:00
Jouni Malinen
ba9774bd76 FILS: Fix BSSID in reassociation case
The RSN supplicant implementation needs to be updated to use the new
BSSID whenever doing FILS authentication. Previously, this was only done
when notifying association and that was too late for the case of
reassociation. Fix this by providing the new BSSID when calling
fils_process_auth(). This makes PTK derivation use the correct BSSID.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-21 12:26:57 +02:00
Jouni Malinen
7eace3787c FILS: Find PMKSA cache entries on AP based on FILS Cache Identifier
This allows PMKSA cache entries to be shared between all the BSSs
operated by the same hostapd process when those BSSs use the same FILS
Cache Identifier value.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-21 12:18:58 +02:00
Badrish Adiga H R
128f6a98b3 mka: Fix the order of operations in secure channel deletion
The correct order of deleting a secure channel is to purge all the
secure associations in the channel before actually deleting the secure
channel.

Signed-off-by: Badrish Adiga H R <badrish.adigahr@gmail.com>
2017-02-20 22:15:04 +02:00
Saurav Babu
213eb18851 dbus: Set mode to mesh in bss properties when mesh is supported
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-02-20 22:14:19 +02:00
Jouni Malinen
c7c964cd46 tests: RSN pre-authentication failure to add a PMKSA entry
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-20 13:31:59 +02:00
Jouni Malinen
21fda4ee72 RSN: Fix pre-authentication EAPOL-Start startPeriod configuration
The RSN pre-authentication case ended up ignoring the initial
startPeriod value and delayed EAPOL-Start message by two seconds. Fix
this by forcing the first EAPOL-Start message to be sent when running
pre-authentication.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-20 12:48:04 +02:00
Jouni Malinen
d62391fec9 tests: RSN pre-authentication processing on AP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-20 11:47:07 +02:00
Purushottam Kushwaha
3f23260da8 nl80211: Notify reason for connection timeout failure
This adds reason for timeout in event CTRL-EVENT-ASSOC-REJECT whenever
connection failure happens because of timeout. This extends the
"timeout" parameter in the event to include the reason, if available:
timeout=scan, timeout=auth, timeout=assoc.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-20 10:47:08 +02:00
Peng Xu
ca1ab9db2a hostapd: Get vendor HE capabilities
Allow hostapd query device HE capabilities via vendor command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-19 17:39:33 +02:00
Peng Xu
7785c70bbb QCA vendor command for fetching HE capabilities
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-19 17:39:30 +02:00
Peng Xu
d512f406fc hostapd: Add IEEE 802.11ax HE IEs into Beacon/Probe Response frames
IEEE 802.11ax HE changes to include HE IEs in Beacon and Probe Response
frames. These elements are using vendor specific forms for now since the
IEEE 802.11ax draft is not yet finalized and the element contents is
subject to change.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-19 17:37:55 +02:00
Peng Xu
94380cb40a hostapd: Initial IEEE 802.11ax (HE) definitions
Add IEEE 802.11ax definitions for config, IEEE structures, and
constants. These are still subject to change in the IEEE process.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-19 17:37:52 +02:00
Masashi Honma
5972dc73c1 mesh: Use correct rate in VHT and HT mixed environment
Let mesh STA A be a STA which has config disable_ht=0 and disable_vht=1.
Let mesh STA B be a STA which has config disable_ht=0 and disable_vht=0.
The mesh STA A and B was connected.

Previously, the mesh STA A sent frame with VHT rate even though its VHT
was disabled. This commit fixes the issue by checking the local BSS VHT
configuration.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-02-19 16:01:17 +02:00
Masashi Honma
84ea61cffe mesh: Use correct rate in HT and legacy mixed environment
Let mesh STA A be a STA which has config disable_ht=1.
Let mesh STA B be a STA which has config disable_ht=0.
The mesh STA A and B was connected.

Previously, the mesh STA A sent frame with HT rate even though its HT
was disabled. This commit fixes the issue by checking the local BSS HT
configuration.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-02-19 16:01:17 +02:00
Masashi Honma
025c6a47fb VHT: Remove a redundant check
This check is already done in ibss_mesh_setup_freq().

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-02-19 16:01:17 +02:00
Masashi Honma
a7a638c2c4 hw_features: Move VHT capabilities checks to common
This allows the previous AP-specific functions to be use for IBSS/mesh
setup in wpa_supplicant.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-02-19 15:53:05 +02:00
Jouni Malinen
e01cf2afc9 Define eapol_sm_get_eap_proxy_imsi() only with CONFIG_EAP_PROXY=y
This function is called only from locations within ifdef
CONFIG_EAP_PROXY, so there is no need to try to cover the not-defined
case here and the function can simply be removed completely if
CONFIG_EAP_PROXY=y is not used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-19 12:28:33 +02:00
Jouni Malinen
a8e25deeb8 FT: Merge similar error paths to use common steps
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-19 12:23:21 +02:00
Jouni Malinen
c89422864f tests: WPA2-PSK-FT AP Reassociation Request frame processing
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-19 11:55:51 +02:00