Commit graph

2390 commits

Author SHA1 Message Date
Jouni Malinen
73e492693d P2P: Add TODO note for Group Formation bit use in AP selection 2010-09-09 07:17:17 -07:00
Jouni Malinen
4c2c302893 P2P: Remove 802.11b rates from wpa_supplicant AP mode operations
TODO: do this only for P2P group interface
2010-09-09 07:17:17 -07:00
Jouni Malinen
4dac02455a P2P: Use config block with disabled==2 to store persistent groups 2010-09-09 07:17:17 -07:00
Jouni Malinen
046b26a24e nl80211: Add P2P operations 2010-09-09 07:17:17 -07:00
Jouni Malinen
2883205ec8 driver_test: Add functionality for allowing P2P testing 2010-09-09 07:17:17 -07:00
Jouni Malinen
75bde05d53 P2P: Add driver operations for P2P use 2010-09-09 07:17:16 -07:00
Jouni Malinen
2ff99b3c38 P2P: Do not save temporary networks 2010-09-09 07:17:16 -07:00
Jouni Malinen
b2c5a4a3df P2P: Do not filter BSSes based on SSID during P2P Provisioning
TODO: Use group id from GO Neg instead(?)
2010-09-09 07:17:16 -07:00
Jouni Malinen
9fa243b295 P2P: Let WPS code know if it is used in a P2P group 2010-09-09 07:17:16 -07:00
Jouni Malinen
e3768e7c94 P2P: Add global configuration parameters for P2P 2010-09-09 07:17:16 -07:00
Jouni Malinen
2c5d725c65 P2P: Add dynamic network config block parameters for P2P 2010-09-09 07:17:16 -07:00
Jouni Malinen
62281bc690 P2P: Do no process Probe Request with P2P wildcard SSID in WPS
The Probe Request frames used in P2P Device Discovery should not be
processed by the WPS implementation.
2010-09-09 07:17:16 -07:00
Jouni Malinen
935a948f97 P2P: Enable use of WPS Requested Device Type without WPS 2.0 2010-09-09 07:17:16 -07:00
Jouni Malinen
63675def6e P2P: Add Device Name into WPS IE in Probe Request frames 2010-09-09 07:17:16 -07:00
Jouni Malinen
91a9464528 Make IEEE 802.11 IE parser aware of P2P IE
This does not handle fragmented IEs and is only used to check quickly
whether the IE blob includes any P2P IE(s).
2010-09-09 07:17:16 -07:00
Jouni Malinen
dd6cc5a20c P2P: Wi-Fi Direct frame format definitions 2010-09-09 07:17:16 -07:00
Jouni Malinen
611aea7d41 Allow ctrl_iface SET command to change global config parameters 2010-09-09 07:17:16 -07:00
Jouni Malinen
1d47214aa9 Add flag indicating which global configuration parameters have changed 2010-09-09 07:17:16 -07:00
Jouni Malinen
121adf9c2e Move global configuration parser into config.c
This makes it easier to provide support for dynamic updates of the
global configuration parameters while wpa_supplicant is running.
2010-09-09 07:17:16 -07:00
Jouni Malinen
fdc9eeb175 WPS 2.0: Convert new attributes into WFA vendor extension
The WSC 2.0 specification moved to use another design for the new
attributes to avoid backwards compatibility issues with some
deployed implementations.
2010-09-09 06:07:49 -07:00
Jouni Malinen
ac4dcaf7bf WPS 2.0: Fix strict mode validation of UPnP MAC Address format
This was supposed to only reject the message from WPS 2.0 ER, not from
WPS 1.0 ER.
2010-09-09 06:07:49 -07:00
Jouni Malinen
42f50264c0 WPS: Make fragment size configurable for EAP-WSC peer
"wpa_cli set wps_fragment_size <val>" can now be used to configure the
fragment size limit for EAP-WSC.
2010-09-09 06:07:49 -07:00
Jouni Malinen
ecece754db WPS: Add more debug prints for authorized MACs operations 2010-09-09 06:07:49 -07:00
Jouni Malinen
498cdee0c7 WPS ER: Use PBC overlap detection
ER should follow same rules as internal Registrar in an AP for
session overlap detection.
2010-09-09 06:07:49 -07:00
Jouni Malinen
6a4477236e WPS 2.0: Only reject Probe Request frames from WPS 2.0 devices 2010-09-09 06:07:49 -07:00
Jouni Malinen
e69b86b71d WPS 2.0: By default, use strict validation reject only with WPS 2.0 2010-09-09 06:07:49 -07:00
Jouni Malinen
cae67937ca WPS: Fix CONFIG_WPS_STRICT build option
This was not supposed to be depending on CONFIG_WPS_NFC.
2010-09-09 06:07:49 -07:00
Jouni Malinen
5fabd9fefb WPS: Fix strict validation to mandate Network Index attribute
While this attribute is is now deprecated, it is still required
for backwards compatibility. Better check this if strict validation
is enabled.
2010-09-09 06:07:49 -07:00
Jouni Malinen
e6e25d37a3 WPS 2.0: Use strict validation of NewWLANEventMAC only with WPS 2.0
This avoids some testing issues with WPS 1.0 implementations while
maintaining strict validation for WPS 2.0 implementations.
2010-09-09 06:07:49 -07:00
Jouni Malinen
b68ccf4048 WPS ER: Do not use SetSelectedRegistrar when learning/configuring AP 2010-09-09 06:07:49 -07:00
Jouni Malinen
ad4741183f WPS 2.0: Make sure PHY/VIRT flag gets set for PBC 2010-09-09 06:07:48 -07:00
Jouni Malinen
168f840169 WPS 2.0: Add strict validation of SetSelectedRegistrar attributes 2010-09-09 06:07:48 -07:00
Jouni Malinen
545ee4fd3d WPS 2.0: Add wildcard AuthorizedMACs if Enrollee address is not known 2010-09-09 06:07:48 -07:00
Jouni Malinen
53587ec183 WPS 2.0: Make WSC 2.0 support to be build option (CONFIG_WPS2)
For now, the default build will only include WSC 1.0 support.
CONFIG_WPS2=y can be used to add support for WSC 2.0.
2010-09-09 06:07:48 -07:00
Jouni Malinen
c15a854aec WPS 2.0: Add tool for testing protocol extensibility
This is disabled by default and can be enabled by defining
CONFIG_WPS_EXTENSIBILITY_TESTING.
2010-09-09 06:07:48 -07:00
Jouni Malinen
4a34969824 WPS: Add a test mechanism for adding an extra credential into M8
This can be used to build a test version of ER that adds an extra
Credential attribute into M8.
2010-09-09 06:07:48 -07:00
Jouni Malinen
54f489be45 WPS 2.0: Validate WPS attributes in management frames and WSC messages
If CONFIG_WPS_STRICT is set, validate WPS IE(s) in management frames and
reject the frames if any of the mandatory attributes is missing or if an
included attribute uses an invalid value. In addition, verify that all
mandatory attributes are included and have valid values in the WSC
messages.
2010-09-09 06:07:48 -07:00
Jouni Malinen
00ae50bc87 atheros: Use larger buffer for WSC IE changes
This resolves issues in updating Beacon/Probe Response frame IEs
in a case where the value may be long enough to get fragmented
into multiple IEs.
2010-09-09 06:07:48 -07:00
Jouni Malinen
ed1c1ebfb4 WPS 2.0: Ignore WEP Credentials as station Enrollee
Ignore Credential if it is for a WEP network. Reject the message if
no valid Credential is found.
2010-09-09 06:07:48 -07:00
Jouni Malinen
6be2d7f826 WPS 2.0: Enforce new security policy of received AP Settings
When receiving new AP Settings from ER, reject WEP configuration
and upgrade WPA-Personal/TKIP only to mixed mode (i.e., add
WPA2-Personal/CCMP).
2010-09-09 06:07:48 -07:00
Jouni Malinen
6b633b4da7 WPS 2.0: Fix Probe Request WPS IE building to be able to fragment data
If all the device information attributes use their maximum lengths,
a single WPS IE is not enough to fit in all the data and as such,
we must be able to fragment the data. In addition, the wpabuf needs
to be allocated larger to fit in maximum data.
2010-09-09 06:07:47 -07:00
Jouni Malinen
dcc4d8be75 WPS 2.0: Disable WPS workarounds if CONFIG_WPS_STRICT is defined 2010-09-09 06:07:47 -07:00
Jouni Malinen
5314d652d4 WPS 2.0: Modify empty-string workaround to meet 2.0 rules
Instead of using 0x00 as the extra character, use space (' ') to
avoid failing tests that verify that the variable length string
attributes are not null terminated. In addition, this workaround
can now be disabled by defining CONFIG_WPS_STRICT for the build.
This can be done by adding following line to .config:
CFLAGS += -DCONFIG_WPS_STRICT

However, it should be noted that such a build may not interoperate
with some deployed WPS 1.0 -based implementations and as such, is
mainly designed for testing.
2010-09-09 06:07:47 -07:00
Jouni Malinen
6a857074f4 WPS 2.0: Add virtual/physical display and pushbutton config methods 2010-09-09 06:07:47 -07:00
Jouni Malinen
662bd57522 WPS 2.0: Add device attributes into Probe Request
Add Manufacturer, Model Name, Model Number, and Device Name attributes
into the WSC IE in the Probe Request frames.
2010-09-09 06:07:47 -07:00
Jouni Malinen
cfe1c3f1ef WPS 2.0: Add Request to Enroll attribute into Probe Request
Whenever wpa_supplication is using Request Type Enrollee, it is trying
to enroll into a network. Indicate this with the explicit inclusion of
Request to Enroll attribute with value TRUE.
2010-09-09 06:07:47 -07:00
Jouni Malinen
31fcea931d WPS 2.0: Add support for AuthorizedMACs attribute
Advertize list of authorized enrollee MAC addresses in Beacon and
Probe Response frames and use these when selecting the AP. In order
to provide the list, the enrollee MAC address should be specified
whenever adding a new PIN. In addition, add UUID-R into
SetSelectedRegistrar action to make it potentially easier for an AP
to figure out which ER sent the action should there be multiple ERs
using the same IP address.
2010-09-09 06:07:47 -07:00
Jouni Malinen
f439079e93 WPS 2.0: Add new attributes and update version negotiation
This adds definitions and parsing of the new attributes that were added
in WPS 2.0. In addition, the version negotiation is updated to use the
new mechanism, i.e., accept everything received and use the new Version2
attribute in transmitted messages.
2010-09-09 06:07:47 -07:00
Jouni Malinen
266c828e54 bgscan learn: Fix build
Commit 9ff80a10e8 forgot to include the
new scan variable in the coded copied from bgscan_simple.c. Add that
here to fix the build.
2010-09-09 05:59:06 -07:00
Jouni Malinen
a0fad21014 Indicate Barker Preamble Mode in ERP IE also based on local configuration
While this is not strictly speaking required based on dynamic
configuration (i.e., dot11ShortPreambleOptionImplemented is static
value based on implementation, not runtime configuration), it is better
to follow local configuration parameter for short preamble in addition
to the associated station capabilities.
2010-09-05 13:11:42 +03:00